powerpc: Warp patches for the new ndfc driver
Subsystems (3)
PATCH 1/1 powerpc: Warp patches for the new ndfc driver
Woo hoo! The ndfc driver finally got in the kernel! These patches update the warp to use the new driver.
Cheers,
Sean
These patches allow the warp to use the new of platform ndfc driver.
- warp.dts changed to work with ndfc
- warp-nand.c no longer needed
- removed obsolete rev A support from cuboot-warp.c
---
arch/powerpc/boot/cuboot-warp.c +0 -43
@@ -18,57 +18,14 @@static bd_t bd; -static void warp_fixup_one_nor (u32 from,u32 to) -{ -void *devp; -char name[50 ]; -u32 v[2 ]; - -sprintf (name,"/plb/opb/ebc/nor_flash@0,0/partition@%x" , from); - - devp =finddevice (name); -if (!devp) -return ; - -if (getprop (devp,"reg" , v,sizeof (v)) ==sizeof (v)) { - v[0 ] = to; -setprop (devp,"reg" , v,sizeof (v)); - -printf ("NOR 64M fixup %x -> %x\r\n" , from, to); - } -} - -static void warp_fixups (void ) {ibm440ep_fixup_clocks (66000000 ,11059200 ,50000000 );ibm4xx_sdram_fixup_memsize ();ibm4xx_fixup_ebc_ranges ("/plb/opb/ebc" );dt_fixup_mac_address_by_alias ("ethernet0" , bd.bi_enetaddr); - -/* Fixup for 64M flash on Rev A boards. */ -if (bd.bi_flashsize ==0x4000000 ) { -void *devp; -u32 v[3 ]; - - devp =finddevice ("/plb/opb/ebc/nor_flash@0,0" ); -if (!devp) -return ; - -/* Fixup the size */ -if (getprop (devp,"reg" , v,sizeof (v)) ==sizeof (v)) { - v[2 ] = bd.bi_flashsize; -setprop (devp,"reg" , v,sizeof (v)); - } - -/* Fixup parition offsets */ -warp_fixup_one_nor (0x300000 ,0x3f00000 ); -warp_fixup_one_nor (0x340000 ,0x3f40000 ); -warp_fixup_one_nor (0x380000 ,0x3f80000 ); - } } -void platform_init (unsigned long r3,unsigned long r4,unsigned long r5,unsigned long r6,unsigned long r7) {
arch/powerpc/boot/dts/warp.dts +41 -1
59 lines not on this page · raw message
arch/powerpc/platforms/44x/Makefile +0 -1
@@ -3,5 +3,4 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o -obj-$(CONFIG_WARP) += warp-nand.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
arch/powerpc/platforms/44x/warp-nand.c deleted +0 -135
135 lines not on this page · raw message
Quoted 2 lines · On Fri, 9 Jan 2009 23:20:11 -0500 "Sean MacLennan"…
Woo hoo! The ndfc driver finally got in the kernel! These patches update the warp to use the new driver.
Just a bump and a comment to see who is reading this ;)
2.6.29 is a very important release for the Warp because with the ndfc driver, and assuming this patch or something like it is accepted, you will be able to get a working kernel for the warp from kernel.org. It will be missing SD support and LED support, but everything else will work :)
But it seems to me that otherwise, 2.6.29 seems to be a very quiet release. Has anybody else noticed this?
Cheers,
Sean
Quoted 6 lines · Sean MacLennan
Quoted 2 lines · On Fri, 9 Jan 2009 23:20:11 -0500 "Sean MacLennan"…
Woo hoo! The ndfc driver finally got in the kernel! These patches update the warp to use the new driver.
Quoted 7 lines
Just a bump and a comment to see who is reading this ;)
2.6.29 is a very important release for the Warp because with the ndfc driver, and assuming this patch or something like it is accepted, you will be able to get a working kernel for the warp from kernel.org. It will be missing SD support and LED support, but everything else will work :)
I have it queued up for today. I was waiting for Ben to bump his tree to include -rc2 so that I can send him the defconfig updates at the same time.
Quoted 2 lines
But it seems to me that otherwise, 2.6.29 seems to be a very quiet release. Has anybody else noticed this?
Yes.
josh