LVM Volume Size Question
Hey there,
I have most likely a simple question concerning LVM that I figured someone might be able to provide some insight into.
I just setup LVM with both /dev/sdb1 and /dev/sdc1 being assigned to my “vg” volume group. There is only one logical volume “myth” off of “vg”.
My steps:
fdisk /dev/sdc [created 1 partition to span the entire drive of type 8e] emerge lvm2
vgscan
vgchange -a y
pvcreate /dev/sdc1
vgcreate vg /dev/sdc1
lvcreate -L900GB -nmyth vg
mkfs.jfs /dev/vg/myth
fdisk /dev/sdb [created 1 partition to span the entire drive of type 8e] pvcreate /dev/sdb1
vgextend vg /dev/sdb1
lvextend -L+700G /dev/vg/myth
Sdb1: 700GB drive with one partition
Sdd1: 1TB drive with one partition
My question is related to the space available in /dev/vg/myth. I would assume that I should have ~1.7TB of space on that logical partition, but df does not seems to indicate that.
# df Filesystem 1K-blocks Used Available Use% Mounted on … /dev/mapper/vg-myth 943656628 544996248 398660380 58% /mnt/store … mythserver michael # pvdisplay /dev/sdb1 --- Physical volume --- PV Name /dev/sdb1 VG Name vg PV Size 698.64 GB / not usable 2.34 MB Allocatable yes PE Size (KByte) 4096 Total PE 178850 Free PE 292 Allocated PE 178558 PV UUID SetyUA-DkWL-zDDo-Wm-3avR-nJH8-OnUujv mythserver michael # pvdisplay /dev/sdc1 --- Physical volume --- PV Name /dev/sdc1 VG Name vg PV Size 931.51 GB / not usable 3.19 MB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 238466 Free PE 0 Allocated PE 238466 PV UUID DX11mo-r0Eh-jN5N-objS-oqo6-eVSU-MShkS2 mythserver michael # lvextend -L+700G /dev/vg/myth Extending logical volume myth to 2.27 TB Insufficient free space: 179200 extents needed, but only 292 available
I am guessing that I should have run these commands to extend the logical volume to its desired size:
vgextend vg /dev/sdb1
lvextend -L+700G /dev/vg/myth
before creating the filesystem with this command which I am guessing locked the size to the 900GB with I used in my setup steps mkfs.jfs /dev/vg/myth
Does that sound like my issue?
Any thoughts on how to get out of this situation while ensuring no loss of my data that currently resides on /dev/mapper/vg-myth?
I am thinking that the following steps should work:
Copy all of my files on /dev/mapper/vg-myth to other paritions (I
assume the call to mkfs.jfs below will delete all the contents of this
partition)
"lvreduce -L-641G /dev/vg/myth" (to get the size matched up with 931GB + 698GB [ 2.27TB – 931GB – 698GB) "mkfs.jfs /dev/vg/myth" (recreate the filesystem now that the size has been corrected) remount /dev/vg/myth
copy back the files
Thanks in advance
Mike
Hi Mike,
Could you give us the output of :
vgdisplay -v vg
lvdisplay /dev/vg/myth
I think your myth LV is already 1.5TB, so you only need to run :
# mount -o remount,resize /dev/vg/myth for the JFS filesystem to be resized. Please backup everything before running that :)
However, since what you're doing essentially amounts to RAID0 without the performance benefits (if you lose one drive, your data is lost), I'd run a full backup and run the following commands to create a striped LV :
lvremove /dev/vg/myth
vgremove vg
pvremove /dev/sdb1
pvremove /dev/sdc1
dd if=/dev/zero of=/dev/sdb bs=4096 count=10000 dd if=/dev/zero of=/dev/sdb bs=4096 count=10000 pvcreate /dev/sdb
pvcreate /dev/sdc
vgcreate vg /dev/sdb /dev/sdc
lcreate -i 2 -I 8 -L 1700M -n myth vg /dev/sdb /dev/sdc
(adjust 1700 to whatever your drives will take)
mkfs.jfs /dev/vg/myth
You will lose a bit of space but gain some performance ; the available VG size can then be used for other LVs or snapshots.
Best,
Francois
Quoted 99 lines · On Fri, 23 Jan 2009 11:14:35 -0600 [email protected] wrote:
Hey there,
I have most likely a simple question concerning LVM that I figured someone might be able to provide some insight into.
I just setup LVM with both
/dev/sdb1and/dev/sdc1being assigned to my “vg” volume group. There is only one logical volume “myth” off of “vg”.My steps:
fdisk
/dev/sdc[created 1 partition to span the entire drive of type 8e] emerge lvm2
vgscan
vgchange -a y
pvcreate/dev/sdc1
vgcreate vg/dev/sdc1
lvcreate -L900GB -nmyth vg
mkfs.jfs/dev/vg/myth
fdisk/dev/sdb[created 1 partition to span the entire drive of type 8e] pvcreate/dev/sdb1
vgextend vg/dev/sdb1
lvextend -L+700G/dev/vg/mythSdb1: 700GB drive with one partition
Sdd1: 1TB drive with one partition
My question is related to the space available in
/dev/vg/myth. I would assume that I should have ~1.7TB of space on that logical partition, but df does not seems to indicate that.# df Filesystem 1K-blocks Used Available Use% Mounted on … /dev/mapper/vg-myth 943656628 544996248 398660380 58% /mnt/store … mythserver michael # pvdisplay /dev/sdb1 --- Physical volume --- PV Name /dev/sdb1 VG Name vg PV Size 698.64 GB / not usable 2.34 MB Allocatable yes PE Size (KByte) 4096 Total PE 178850 Free PE 292 Allocated PE 178558 PV UUID SetyUA-DkWL-zDDo-Wm-3avR-nJH8-OnUujv mythserver michael # pvdisplay /dev/sdc1 --- Physical volume --- PV Name /dev/sdc1 VG Name vg PV Size 931.51 GB / not usable 3.19 MB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 238466 Free PE 0 Allocated PE 238466 PV UUID DX11mo-r0Eh-jN5N-objS-oqo6-eVSU-MShkS2 mythserver michael # lvextend -L+700G /dev/vg/myth Extending logical volume myth to 2.27 TB Insufficient free space: 179200 extents needed, but only 292 availableI am guessing that I should have run these commands to extend the logical volume to its desired size:
vgextend vg/dev/sdb1
lvextend -L+700G/dev/vg/mythbefore creating the filesystem with this command which I am guessing locked the size to the 900GB with I used in my setup steps mkfs.jfs
/dev/vg/mythDoes that sound like my issue?
Any thoughts on how to get out of this situation while ensuring no loss of my data that currently resides on
/dev/mapper/vg-myth?I am thinking that the following steps should work:
Copy all of my files on/dev/mapper/vg-mythto other paritions (I
assume the call to mkfs.jfs below will delete all the contents of this
partition)
"lvreduce -L-641G/dev/vg/myth" (to get the size matched up with 931GB + 698GB [ 2.27TB – 931GB – 698GB) "mkfs.jfs/dev/vg/myth" (recreate the filesystem now that the size has been corrected) remount/dev/vg/myth
copy back the filesThanks in advance
Mike_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/