cat /proc/cpuinfo shows full throttle
I'm confused here
when doing a cat /proc/cpuinfo
with an idle system,
I see cpu MHz at 2167.000;
should be at 1000.00
(when settled down);
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz
stepping : 6
cpu MHz : 2167.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow
bogomips : 4322.36
clflush size : 64
power management:
processor : 1vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz
stepping : 6
cpu MHz : 2167.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow
bogomips : 4322.52
clflush size : 64
power management:
the only changes to the system were
compiling xorg from git
which had me running after one dependency to the next. (I honestly can't remember what xproto thing/whatever package that might cause this);
any ideas would be appreciated.
In any case the system is idle and quiet.
it just says full throttle when it should say
nice and quiet.
regards;
Justin P. Mattock
Quoted 8 lines · Justin P. Mattock
I'm confused here when doing a cat
/proc/cpuinfowith an idle system, I see cpu MHz at 2167.000; should be at 1000.00 (when settled down);
..In any case the system is idle and quiet. it just says full throttle when it should say nice and quiet.
is acpi-cpufreq loaded ? and cpufreq-ondemand ?
(Also make sure the relevant sysfs knobs are set to use ondemand)
If no: Make them so!
If yes: boot with cpufreq.debug=7 and send the dmesg
to [email protected]
Thanks,
Dave
Signature · 1 line
http://www.codemonkey.org.uk
Quoted 14 lines · Dave Jones
Quoted 8 lines · Justin P. Mattock
I'm confused here when doing a cat
/proc/cpuinfowith an idle system, I see cpu MHz at 2167.000; should be at 1000.00 (when settled down);
..In any case the system is idle and quiet. it just says full throttle when it should say nice and quiet.
is acpi-cpufreq loaded ? and cpufreq-ondemand ?
(Also make sure the relevant sysfs knobs are set to use ondemand)
Quoted 9 lines
If no: Make them so!
If yes: boot with cpufreq.debug=7 and send the dmesg
to [email protected]Thanks,
Dave
I've managed to have cat /proc/cpuinfo
read correctly. somewhere somehow
when compiling xserver I Installed
some package that messed up libpowersaved11
and liblazy1. reinstalling those packages as well as the other powersaved packages seems to have resolved this issue for me.(as well as haveing cpufreq running correctly);
I just can't remember what might the package be that caused this to go crazy.(oh-well);
as long as the fans aren't screaming/or stuck I'm happy...
regards;
Justin P. Mattock