ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
PATCH 1/1 ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59. Either they define or undef it. Because it's not used in any source files this patch removes any references to it.
--- include/configs/ASH405.h | 1 - include/configs/CATcenter.h | 1 - include/configs/CMS700.h | 1 - include/configs/CPCI2DP.h | 1 - include/configs/CPCI405.h | 1 - include/configs/CPCI4052.h | 1 - include/configs/CPCI405AB.h | 1 - include/configs/CPCI405DT.h | 1 - include/configs/DP405.h | 1 - include/configs/G2000.h | 1 - include/configs/HH405.h | 1 - include/configs/HUB405.h | 1 - include/configs/OCRTC.h | 1 - include/configs/ORSG.h | 1 - include/configs/PCI405.h | 1 - include/configs/PLU405.h | 1 - include/configs/PMC405.h | 1 - include/configs/PPChameleonEVB.h | 1 - include/configs/VOH405.h | 1 - include/configs/VOM405.h | 1 - include/configs/WUH405.h | 1 - include/configs/csb272.h | 1 - include/configs/csb472.h | 1 - include/configs/sbc405.h | 1 - 24 files changed, 0 insertions(+), 24 deletions(-)
include/configs/ASH405.h +0 -1
@@ -125,7 +125,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#undef CONFIG_UART1_CONSOLE/* define for uart1 as console */
include/configs/CATcenter.h +0 -1
@@ -184,7 +184,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/CMS700.h +0 -1
@@ -125,7 +125,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
include/configs/CPCI2DP.h +0 -1
@@ -112,7 +112,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
include/configs/CPCI405.h +0 -1
@@ -125,7 +125,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/CPCI4052.h +0 -1
@@ -134,7 +134,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/CPCI405AB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/CPCI405DT.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/DP405.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#undef CONFIG_UART1_CONSOLE/* define for uart1 as console */
include/configs/G2000.h +0 -1
@@ -152,7 +152,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#undef CONFIG_UART1_CONSOLE/* define for uart1 as console */
include/configs/HH405.h +0 -1
@@ -177,7 +177,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
include/configs/HUB405.h +0 -1
@@ -118,7 +118,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#undef CONFIG_UART1_CONSOLE/* define for uart1 as console */
include/configs/OCRTC.h +0 -1
@@ -105,7 +105,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/ORSG.h +0 -1
@@ -105,7 +105,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/PCI405.h +0 -1
@@ -111,7 +111,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/PLU405.h +0 -1
@@ -138,7 +138,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#undef CONFIG_UART1_CONSOLE/* define for uart1 as console */
include/configs/PMC405.h +0 -1
@@ -132,7 +132,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/PPChameleonEVB.h +0 -1
@@ -192,7 +192,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
include/configs/VOH405.h +0 -1
@@ -134,7 +134,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
include/configs/VOM405.h +0 -1
@@ -121,7 +121,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#undef CONFIG_UART1_CONSOLE/* define for uart1 as console */
include/configs/WUH405.h +0 -1
@@ -122,7 +122,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
include/configs/csb272.h +0 -1
@@ -162,7 +162,6 @@* */ #define CONFIG_SYS_EXT_SERIAL_CLOCK 3868400/* use external serial clock */ -#undef CONFIG_SYS_IGNORE_405_UART_ERRATA_59/* ignore ppc405gp errata #59 */ #undef CONFIG_SYS_BASE_BAUD#define CONFIG_BAUDRATE 38400/* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE \
include/configs/csb472.h +0 -1
@@ -161,7 +161,6 @@* */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* use internal serial clock */ -#undef CONFIG_SYS_IGNORE_405_UART_ERRATA_59/* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200#define CONFIG_BAUDRATE 38400/* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE \
include/configs/sbc405.h +0 -1
@@ -147,7 +147,6 @@#define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK/* no external serial clock used */ -#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ #define CONFIG_SYS_BASE_BAUD 691200/* The following table includes the supported baudrates */
Signature · 1 line
1.5.6.3
PATCH 1/1 ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
Quoted 5 lines · Matthias Fuchs
Lot's of 405 board config files use
CONFIG_SYS_IGNORE_405_UART_ERRATA_59. Either they define or undef it. Because it's not used in any source files this patch removes any references to it.Signed-off-by Matthias Fuchs <[email protected]>
Applied to u-boot/master. Thanks
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================