gianfar: Fix Wake-on-LAN support
Subsystems (2)
PATCH 1/1 gianfar: Fix Wake-on-LAN support
commit 0f0ca340e57bd7446855fefd07a64249acf81223 ("phy: power management support") caused a regression in the gianfar driver.
Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore.
This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view.
A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic.
--- drivers/net/gianfar_mii.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/net/gianfar_mii.c +2 -0
@@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev,if (NULL == new_bus)return -ENOMEM ; +device_init_wakeup (&ofdev->dev,1 ); + new_bus->name ="Gianfar MII Bus" , new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write,
Signature · 1 line
1.5.6.5
From: Anton Vorontsov <[email protected]>
Date: Wed, 28 Jan 2009 23:35:45 +0300
Quoted 12 lines
commit
0f0ca340e57bd7446855fefd07a64249acf81223("phy: power management support") caused a regression in the gianfar driver.Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore.
This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view.
Quoted 4 lines
A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic.
Signed-off-by Anton Vorontsov <[email protected]>
Applied, thanks Anton.