Skip to contentSkip to conversation

SX1 update

U-Boot New Jean-Christophe PLAGNIOL-VILLARD 1 participant 4 messages Jan 29, 2009 Kbuild

lore
Share & tools
lore
#1 lore raw

PATCH 1/3 SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty

---
 Makefile              |   13 +++++++++++--
 include/configs/SX1.h |    2 ++
 2 files changed, 13 insertions(+), 2 deletions(-)
Makefile +11 -2
index 5e7bd63..9e820c4 100644
@@ -2820,8 +2820,17 @@ smdk2400_config	:	unconfig
 smdk2410_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
 
-SX1_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
+SX1_stdout_serial_config \
+SX1_config:		unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
+		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+		$(XECHO) "... configured for stdout serial"; \
+	else \
+		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+		$(XECHO) "... configured for stdout usbtty"; \
+	fi;
+	@$(MKCONFIG) SX1 arm arm925t sx1
 
 # TRAB default configuration:	8 MB Flash, 32 MB RAM
 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
include/configs/SX1.h +2 -0
index fd1a3bd..34a5999 100644
@@ -116,7 +116,9 @@
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTARGS		"mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw"
+#ifdef CONFIG_STDOUT_USBTTY
 #define CONFIG_PREBOOT		"setenv stdout usbtty;setenv stdin usbtty"
+#endif
 
 /*
  * Miscellaneous configurable options
Signature · 1 line
1.5.6.5
#2 lore raw

PATCH 2/3 SX1: Fix second flash mapping

---
 include/configs/SX1.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
include/configs/SX1.h +1 -1
index 34a5999..9bfefc6 100644
@@ -177,7 +177,7 @@
 #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
 #define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 }
 
 /*-----------------------------------------------------------------------
  * FLASH driver setup
Signature · 1 line
1.5.6.5
#3 lore raw

PATCH 3/3 SX1: add hardware V2 support

In the V2 the 2 flash has been replace by one 32MB flash

---
 include/configs/SX1.h |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)
include/configs/SX1.h +6 -2
index 9bfefc6..78c5152 100644
@@ -169,11 +169,15 @@
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
+ * V1
+ * PHYS_FLASH_SIZE_1			(16 << 10)	16 MB
+ * PHYS_FLASH_SIZE_2			(8 << 10)	 8 MB
+ * V2 only 1 flash
+ * PHYS_FLASH_SIZE_1			(32 << 10)	32 MB
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define PHYS_FLASH_SIZE		(16 << 10) /* 16 MB */
 #define PHYS_FLASH_SECT_SIZE	(128*1024) /* Size of a sector (128kB) */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	(256)	/* max number of sectors on one chip */
 #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor@beginning of flash */
 #define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
Signature · 1 line
1.5.6.5