2.6.27-stable review
Subsystems (20)
cover 2.6.27-stable review
This is the start of the stable review cycle for the 2.6.27.14 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
Note, there still are some more .28 patches pending for the -stable releases, but I wanted to get this release out now to fix the major problems that have recently been found.
If you have sent patches to be included in .28, and you don't see them here, please feel free to just drop [email protected] a message with the git commit ids to make sure they end up in the next release.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Responses should be made by Monday, February 2, 00:00:00 UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.27.14-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
Makefile | 2 +- arch/alpha/kernel/irq_srm.c | 2 + crypto/authenc.c | 24 ++++-- crypto/ccm.c | 2 + drivers/ata/pata_via.c | 22 ++++- drivers/ide/pci/it821x.c | 12 +++ drivers/misc/sgi-xp/xpc_sn2.c | 19 +++-- drivers/misc/sgi-xp/xpc_uv.c | 2 +- drivers/net/bnx2x_main.c | 3 + drivers/net/wireless/rtl8187_dev.c | 1 + drivers/net/wireless/rtl8187_rtl8225.c | 10 ++- drivers/pci/hotplug/pciehp_core.c | 4 +- drivers/serial/8250_pci.c | 3 + drivers/usb/core/devio.c | 20 +++-- drivers/usb/core/inode.c | 1 - drivers/usb/core/usb.h | 1 - drivers/usb/mon/mon_bin.c | 105 ++++++++++++++++--------- drivers/usb/storage/unusual_devs.h | 6 ++ fs/eventpoll.c | 22 +---- fs/ext3/namei.c | 20 ++++-- fs/fuse/dev.c | 3 +- fs/fuse/file.c | 2 +- fs/fuse/inode.c | 10 ++- fs/inotify_user.c | 135 +++++++++++++++++-------------- fs/sysfs/bin.c | 6 ++ include/asm-x86/pgalloc.h | 1 + include/linux/Kbuild | 1 + include/linux/pci_ids.h | 6 ++ include/linux/sched.h | 1 - kernel/relay.c | 4 +- net/mac80211/tx.c | 4 +- net/sunrpc/rpcb_clnt.c | 40 ++++++++-- sound/pci/hda/patch_conexant.c | 1 + sound/pci/hda/patch_realtek.c | 1 + sound/pci/hda/patch_sigmatel.c | 2 + sound/pci/oxygen/virtuoso.c | 22 ++++-- 36 files changed, 336 insertions(+), 184 deletions(-)
PATCH 1/32 fuse: destroy bdi on umount
2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Miklos Szeredi <[email protected]>
commit 26c3679101dbccc054dcf370143941844ba70531 upstream.
If a fuse filesystem is unmounted but the device file descriptor remains open and a new mount reuses the old device number, then the mount fails with EEXIST and the following warning is printed in the kernel log:
WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x35/0x3d() sysfs: duplicate filename '0:15' can not be created
The cause is that the bdi belonging to the fuse filesystem was destoryed only after the device file was released. Fix this by calling bdi_destroy() from fuse_put_super() instead.
--- fs/fuse/dev.c | 3 ++- fs/fuse/inode.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)
fs/fuse/dev.c +2 -1
@@ -281,7 +281,8 @@ static void request_end(struct fuse_conn fc->blocked =0 ;wake_up_all (&fc->blocked_waitq); } -if (fc->num_background ==FUSE_CONGESTION_THRESHOLD ) { +if (fc->num_background ==FUSE_CONGESTION_THRESHOLD && + fc->connected) {clear_bdi_congested (&fc->bdi,READ );clear_bdi_congested (&fc->bdi,WRITE ); }
fs/fuse/inode.c +1 -1
@@ -292,6 +292,7 @@ static void fuse_put_super(struct super_list_del (&fc->entry);fuse_ctl_remove_conn (fc);mutex_unlock (&fuse_mutex); +bdi_destroy (&fc->bdi);fuse_conn_put (fc); }
@@ -531,7 +532,6 @@ void fuse_conn_put(struct fuse_conn *fc)if (fc->destroy_req)fuse_request_free (fc->destroy_req);mutex_destroy (&fc->inst_mutex); -bdi_destroy (&fc->bdi);kfree (fc); } }
PATCH 2/32 fuse: fix missing fput on error
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Miklos Szeredi <[email protected]>
commit 3ddf1e7f57237ac7c5d5bfb7058f1ea4f970b661 upstream.
Fix the leaking file reference if allocation or initialization of fuse_conn failed.
--- fs/fuse/inode.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
fs/fuse/inode.c +6 -2
@@ -832,12 +832,16 @@ static int fuse_fill_super(struct super_if (!file)return -EINVAL ; -if (file->f_op != &fuse_dev_operations) +if (file->f_op != &fuse_dev_operations) { +fput (file);return -EINVAL ; + } fc =new_conn (sb); -if (!fc) +if (!fc) { +fput (file);return -ENOMEM ; + } fc->flags = d.flags; fc->user_id = d.user_id;
PATCH 3/32 fuse: fix NULL deref in fuse_file_alloc()
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dan Carpenter <[email protected]>
commit bb875b38dc5e343bdb696b2eab8233e4d195e208 upstream.
ff is set to NULL and then dereferenced on line 65. Compile tested only.
--- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/fuse/file.c +1 -1
@@ -54,7 +54,7 @@ struct fuse_file *fuse_file_alloc(void) ff->reserved_req =fuse_request_alloc ();if (!ff->reserved_req) {kfree (ff); - ff =NULL ; +return NULL ; }else {INIT_LIST_HEAD (&ff->write_entry);atomic_set (&ff->count,0 );
PATCH 4/32 inotify: clean up inotify_read and fix locking problems
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Vegard Nossum <[email protected]>
commit 3632dee2f8b8a9720329f29eeaa4ec4669a3aff8 upstream.
If userspace supplies an invalid pointer to a read() of an inotify instance, the inotify device's event list mutex is unlocked twice. This causes an unbalance which effectively leaves the data structure unprotected, and we can trigger oopses by accessing the inotify instance from different tasks concurrently.
The best fix (contributed largely by Linus) is a total rewrite of the function in question:
Quoted 18 lines · Linus Torvalds
The thing to notice is that:
- locking is done in just one place, and there is no question about it not having an unlock.
- that whole double-while(1)-loop thing is gone.
- use multiple functions to make nesting and error handling sane
- do error testing after doing the things you always need to do, ie do this:
mutex_lock(..) ret = function_call(); mutex_unlock(..) .. test ret here ..
Quoted 8 lines
instead of doing conditional exits with unlocking or freeing.
So if the code is written in this way, it may still be buggy, but at least it's not buggy because of subtle "forgot to unlock" or "forgot to free" issues.
This _always_ unlocks if it locked, and it always frees if it got a non-error kevent.
--- fs/inotify_user.c | 135 +++++++++++++++++++++++++++++------------------------- 1 file changed, 74 insertions(+), 61 deletions(-)
fs/inotify_user.c +74 -61
@@ -427,10 +427,61 @@ static unsigned int inotify_poll(structreturn ret; } +/* +* Get an inotify_kernel_event if one exists and is small +* enough to fit in "count". Return an error pointer if +* not large enough. +* +* Called with the device ev_mutex held. +*/ +static struct inotify_kernel_event *get_one_event (struct inotify_device *dev, +size_t count) +{ +size_t event_size =sizeof (struct inotify_event ); +struct inotify_kernel_event *kevent; + +if (list_empty (&dev->events)) +return NULL ; + + kevent =inotify_dev_get_event (dev); +if (kevent->name) + event_size += kevent->event.len; + +if (event_size > count) +return ERR_PTR (-EINVAL ); + +remove_kevent (dev, kevent); +return kevent; +} + +/* +* Copy an event to user space, returning how much we copied. +* +* We already checked that the event size is smaller than the +* buffer we had in "get_one_event()" above. +*/ +static ssize_t copy_event_to_user (struct inotify_kernel_event *kevent, +char __user *buf) +{ +size_t event_size =sizeof (struct inotify_event ); + +if (copy_to_user (buf, &kevent->event, event_size)) +return -EFAULT ; + +if (kevent->name) { + buf += event_size; + +if (copy_to_user (buf, kevent->name, kevent->event.len)) +return -EFAULT ; + + event_size += kevent->event.len; + } +return event_size; +} +static ssize_t inotify_read (struct file *file,char __user *buf,size_t count,loff_t *pos) { -size_t event_size =sizeof (struct inotify_event );struct inotify_device *dev;char __user *start;int ret;
@@ -440,81 +491,43 @@ static ssize_t inotify_read(struct file dev = file->private_data;while (1 ) { +struct inotify_kernel_event *kevent;prepare_to_wait (&dev->wq, &wait,TASK_INTERRUPTIBLE );mutex_lock (&dev->ev_mutex); -if (!list_empty (&dev->events)) { - ret =0 ; -break ; - } + kevent =get_one_event (dev, count);mutex_unlock (&dev->ev_mutex); -if (file->f_flags &O_NONBLOCK ) { - ret = -EAGAIN ; -break ; - } - -if (signal_pending (current)) { - ret = -EINTR ; -break ; +if (kevent) { + ret =PTR_ERR (kevent); +if (IS_ERR (kevent)) +break ; + ret =copy_event_to_user (kevent, buf); +free_kevent (kevent); +if (ret <0 ) +break ; + buf += ret; + count -= ret; +continue ; } -schedule (); - } - -finish_wait (&dev->wq, &wait); -if (ret) -return ret; - -while (1 ) { -struct inotify_kernel_event *kevent; - - ret = buf - start; -if (list_empty (&dev->events)) + ret = -EAGAIN ; +if (file->f_flags &O_NONBLOCK )break ; - - kevent =inotify_dev_get_event (dev); -if (event_size + kevent->event.len > count) { -if (ret ==0 && count >0 ) { -/* -* could not get a single event because we -* didn't have enough buffer space. -*/ - ret = -EINVAL ; - } + ret = -EINTR ; +if (signal_pending (current))break ; - } -remove_kevent (dev, kevent); -/* -* Must perform the copy_to_user outside the mutex in order -* to avoid a lock order reversal with mmap_sem. -*/ -mutex_unlock (&dev->ev_mutex); - -if (copy_to_user (buf, &kevent->event, event_size)) { - ret = -EFAULT ; +if (start != buf)break ; - } - buf += event_size; - count -= event_size; - -if (kevent->name) { -if (copy_to_user (buf, kevent->name, kevent->event.len)){ - ret = -EFAULT ; -break ; - } - buf += kevent->event.len; - count -= kevent->event.len; - } -free_kevent (kevent); - -mutex_lock (&dev->ev_mutex); +schedule (); } -mutex_unlock (&dev->ev_mutex); +finish_wait (&dev->wq, &wait); +if (start != buf && ret != -EFAULT ) + ret = buf - start;return ret; }
PATCH 5/32 mac80211: decrement ref count to netdev after launching mesh discovery
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Brian Cavagnolo <[email protected]>
commit 5dc306f3bd1d4cfdf79df39221b3036eab1ddcf3 upstream.
After launching mesh discovery in tx path, reference count was not being decremented. This was preventing module unload.
--- net/mac80211/tx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/mac80211/tx.c +3 -1
@@ -1335,8 +1335,10 @@ int ieee80211_master_start_xmit(struct sif (is_multicast_ether_addr (hdr->addr3))memcpy (hdr->addr1, hdr->addr3,ETH_ALEN );else -if (mesh_nexthop_lookup (skb, odev)) +if (mesh_nexthop_lookup (skb, odev)) { +dev_put (odev);return 0 ; + }if (memcmp (odev->dev_addr, hdr->addr4,ETH_ALEN ) !=0 )IEEE80211_IFSTA_MESH_CTR_INC (&osdata->u.sta, fwded_frames);
PATCH 6/32 sysfs: fix problems with binary files
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Greg Kroah-Hartman <[email protected]>
commit 4503efd0891c40e30928afb4b23dc3f99c62a6b2 upstream.
Some sysfs binary files don't like having 0 passed to them as a size. Fix this up at the root by just returning to the vfs if userspace asks us for a zero sized buffer.
Thanks to Pavel Roskin for pointing this out.
--- fs/sysfs/bin.c | 6 ++++++ 1 file changed, 6 insertions(+)
fs/sysfs/bin.c +6 -0
@@ -62,6 +62,9 @@ read(struct file *file, char __user *useloff_t offs = *off;int count =min_t (size_t, bytes,PAGE_SIZE ); +if (!bytes) +return 0 ; +if (size) {if (offs > size)return 0 ;
@@ -119,6 +122,9 @@ static ssize_t write(struct file *file,loff_t offs = *off;int count =min_t (size_t, bytes,PAGE_SIZE ); +if (!bytes) +return 0 ; +if (size) {if (offs > size)return 0 ;
PATCH 7/32 x86, mm: fix pte_free()
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Peter Zijlstra <[email protected]>
commit 42ef73fe134732b2e91c0326df5fd568da17c4b2 upstream.
On -rt we were seeing spurious bad page states like:
Bad page state in process 'firefox'
page:c1bc2380 flags:0x40000000 mapping:c1bc2390 mapcount:0 count:0 Trying to fix it up, but a reboot is needed
Backtrace: Pid: 503, comm: firefox Not tainted 2.6.26.8-rt13 #3 [<c043d0f3>] ? printk+0x14/0x19 [<c0272d4e>] bad_page+0x4e/0x79 [<c0273831>] free_hot_cold_page+0x5b/0x1d3 [<c02739f6>] free_hot_page+0xf/0x11 [<c0273a18>] __free_pages+0x20/0x2b [<c027d170>] __pte_alloc+0x87/0x91 [<c027d25e>] handle_mm_fault+0xe4/0x733 [<c043f680>] ? rt_mutex_down_read_trylock+0x57/0x63 [<c043f680>] ? rt_mutex_down_read_trylock+0x57/0x63 [<c0218875>] do_page_fault+0x36f/0x88a
This is the case where a concurrent fault already installed the PTE and we get to free the newly allocated one.
This is due to pgtable_page_ctor() doing the spin_lock_init(&page->ptl) which is overlaid with the {private, mapping} struct.
union {
struct {
unsigned long private;
struct address_space *mapping;
};
spinlock_t ptl;
struct kmem_cache *slab;
struct page *first_page;
};Normally the spinlock is small enough to not stomp on page->mapping, but PREEMPT_RT=y has huge 'spin'locks.
But lockdep kernels should also be able to trigger this splat, as the lock tracking code grows the spinlock to cover page->mapping.
The obvious fix is calling pgtable_page_dtor() like the regular pte free path __pte_free_tlb() does.
It seems all architectures except x86 and nm10300 already do this, and nm10300 doesn't seem to use pgtable_page_ctor(), which suggests it doesn't do SMP or simply doesnt do MMU at all or something.
--- include/asm-x86/pgalloc.h | 1 + 1 file changed, 1 insertion(+)
include/asm-x86/pgalloc.h +1 -0
@@ -42,6 +42,7 @@ static inline void pte_free_kernel(strucstatic inline void pte_free (struct mm_struct *mm,struct page *pte) { +pgtable_page_dtor (pte);__free_page (pte); }
PATCH 8/32 alpha: nautilus - fix compile failure with gcc-4.3
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ivan Kokshaysky <[email protected]>
commit 70b66cbfd3316b792a855cb9a2574e85f1a63d0f upstream.
init_srm_irq() deals with irq's #16 and above, but size of irq_desc array on nautilus and some other system types is 16. So gcc-4.3 complains that "array subscript is above array bounds", even though this function is never called on those systems.
This adds a check for NR_IRQS <= 16, which effectively optimizes init_srm_irq() code away on problematic platforms.
Thanks to Daniel Drake <[email protected]> for detailed analysis of the problem.
--- arch/alpha/kernel/irq_srm.c | 2 ++ 1 file changed, 2 insertions(+)
arch/alpha/kernel/irq_srm.c +2 -0
@@ -63,6 +63,8 @@ init_srm_irqs(long max, unsigned long ig {long i; +if (NR_IRQS <=16 ) +return ;for (i =16 ; i < max; ++i) {if (i <64 && ((ignore_mask >> i) &1 ))continue ;
PATCH 9/32 it821x: Add ultra_mask quirk for Vortex86SX
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Brandon Philips <[email protected]>
commit b94b898f3107046b5c97c556e23529283ea5eadd upstream.
On Vortex86SX with IDE controller revision 0x11 ultra DMA must be disabled. This patch was tested by DMP and seems to work.
It is a cleaned up version of their older Kernel patch:
http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gz
--- drivers/ide/pci/it821x.c | 12 ++++++++++++ include/linux/pci_ids.h | 1 + 2 files changed, 13 insertions(+)
drivers/ide/pci/it821x.c +12 -0
@@ -69,6 +69,8 @@#define DRV_NAME "it821x" +#define QUIRK_VORTEX86 1 +struct it821x_dev { unsigned int smart:1, /* Are we in smart raid mode */
@@ -80,6 +82,7 @@ struct it821x_devu16 pio[2 ];/* Cached PIO values */ u16 mwdma[2 ];/* Cached MWDMA values */ u16 udma[2 ];/* Cached UDMA values (per drive) */ +u16 quirks; };#define ATA_66 0
@@ -586,6 +589,12 @@ static void __devinit init_hwif_it821x(i hwif->ultra_mask =ATA_UDMA6 ; hwif->mwdma_mask =ATA_MWDMA2 ; + +/* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */ +if (idev->quirks &QUIRK_VORTEX86 ) { +if (dev->revision ==0x11 ) + hwif->ultra_mask =0 ; + } }static void __devinit it8212_disable_raid (struct pci_dev *dev)
@@ -658,6 +667,8 @@ static int __devinit it821x_init_one(strreturn -ENOMEM ; } + itdevs->quirks = id->driver_data; + rc =ide_pci_init_one (dev, &it821x_chipset, itdevs);if (rc)kfree (itdevs);
@@ -677,6 +688,7 @@ static void __devexit it821x_remove(strustatic const struct pci_device_id it821x_pci_tbl[] = { {PCI_VDEVICE (ITE ,PCI_DEVICE_ID_ITE_8211 ),0 }, {PCI_VDEVICE (ITE ,PCI_DEVICE_ID_ITE_8212 ),0 }, + {PCI_VDEVICE (RDC ,PCI_DEVICE_ID_RDC_D1010 ),QUIRK_VORTEX86 }, {0 , }, };
include/linux/pci_ids.h +1 -0
@@ -2148,6 +2148,7 @@#define PCI_DEVICE_ID_RDC_R6040 0x6040#define PCI_DEVICE_ID_RDC_R6060 0x6060#define PCI_DEVICE_ID_RDC_R6061 0x6061 +#define PCI_DEVICE_ID_RDC_D1010 0x1010#define PCI_VENDOR_ID_LENOVO 0x17aa
PATCH 10/32 libata: pata_via: support VX855, future chips whose IDE controller use 0x0571
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: [email protected] <[email protected]>
commit e4d866cdea24543ee16ce6d07d80c513e86ba983 upstream.
It supports VX855 and future chips whose IDE controller uses PCI ID 0x0571.
--- drivers/ata/pata_via.c | 22 +++++++++++++++++----- include/linux/pci_ids.h | 4 ++++ 2 files changed, 21 insertions(+), 5 deletions(-)
drivers/ata/pata_via.c +17 -5
@@ -87,6 +87,10 @@ enum { VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ }; +enum { +VIA_IDFLAG_SINGLE = (1 <<0 ),/* single channel controller) */ +}; +/* * VIA SouthBridge chips. */
@@ -98,8 +102,12 @@ static const struct via_isa_bridge {u8 rev_max;u16 flags; } via_isa_bridges[] = { + {"vx855" ,PCI_DEVICE_ID_VIA_VX855 ,0x00 ,0x2f , + VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -123,6 +131,8 @@ static const struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { NULL } };
@@ -461,6 +471,7 @@ static int via_init_one(struct pci_dev *static int printed_version;u8 enable;u32 timing; +unsigned long flags = id->driver_data;int rc;if (!printed_version++)
@@ -470,9 +481,13 @@ static int via_init_one(struct pci_dev *if (rc)return rc; +if (flags &VIA_IDFLAG_SINGLE ) + ppi[1 ] = &ata_dummy_port_info; +/* To find out how the IDE will behave and what features we actually have to look at the bridge not the IDE controller */ -for (config = via_isa_bridges; config->id; config++) +for (config = via_isa_bridges; config->id !=PCI_DEVICE_ID_VIA_ANON ; + config++)if ((isa =pci_get_device (PCI_VENDOR_ID_VIA + !!(config->flags &VIA_BAD_ID ), config->id,NULL ))) {
@@ -483,10 +498,6 @@ static int via_init_one(struct pci_dev *pci_dev_put (isa); } -if (!config->id) { -printk (KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n" ); -return -ENODEV ; - }pci_dev_put (isa);if (!(config->flags &VIA_NO_ENABLES )) {
@@ -588,6 +599,7 @@ static const struct pci_device_id via[] { PCI_VDEVICE(VIA, 0x1571), }, { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, { }, };
include/linux/pci_ids.h +4 -0
@@ -1346,6 +1346,7 @@#define PCI_DEVICE_ID_VIA_8783_0 0x3208#define PCI_DEVICE_ID_VIA_8237 0x3227#define PCI_DEVICE_ID_VIA_8251 0x3287 +#define PCI_DEVICE_ID_VIA_8261 0x3402#define PCI_DEVICE_ID_VIA_8237A 0x3337#define PCI_DEVICE_ID_VIA_8237S 0x3372#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324
@@ -1355,10 +1356,13 @@#define PCI_DEVICE_ID_VIA_CX700 0x8324#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581#define PCI_DEVICE_ID_VIA_VX800 0x8353 +#define PCI_DEVICE_ID_VIA_VX855 0x8409#define PCI_DEVICE_ID_VIA_8371_1 0x8391#define PCI_DEVICE_ID_VIA_82C598_1 0x8598#define PCI_DEVICE_ID_VIA_838X_1 0xB188#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 +#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409 +#define PCI_DEVICE_ID_VIA_ANON 0xFFFF#define PCI_VENDOR_ID_SIEMENS 0x110A#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
PATCH 11/32 rtl8187: Add termination packet to prevent stall
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Larry Finger <[email protected]>
commit 2fcbab044a3faf4d4a6e269148dd1f188303b206 upstream.
The RTL8187 and RTL8187B devices can stall unless an explicit termination packet is sent.
--- drivers/net/wireless/rtl8187_dev.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/rtl8187_dev.c +1 -0
@@ -263,6 +263,7 @@ static int rtl8187_tx(struct ieee80211_husb_fill_bulk_urb (urb, priv->udev,usb_sndbulkpipe (priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); + urb->transfer_flags |=URB_ZERO_PACKET ; rc =usb_submit_urb (urb,GFP_ATOMIC );if (rc <0 ) {usb_free_urb (urb);
PATCH 12/32 serial_8250: support for Sealevel Systems Model 7803 COMM+8
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Flavio Leitner <[email protected]>
commit e65f0f8271b1b0452334e5da37fd35413a000de4 upstream.
Add support for Sealevel Systems Model 7803 COMM+8
--- drivers/serial/8250_pci.c | 3 +++ include/linux/pci_ids.h | 1 + 2 files changed, 4 insertions(+)
drivers/serial/8250_pci.c +3 -0
@@ -2190,6 +2190,9 @@ static struct pci_device_id serial_pci_t {PCI_VENDOR_ID_SEALEVEL ,PCI_DEVICE_ID_SEALEVEL_COMM8 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, +PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , + pbn_b2_8_460800 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , pbn_b2_8_115200 },
include/linux/pci_ids.h +1 -0
@@ -1784,6 +1784,7 @@#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801 +#define PCI_DEVICE_ID_SEALEVEL_7803 0x7803#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804#define PCI_VENDOR_ID_HYPERCOPE 0x1365
PATCH 13/32 SUNRPC: Fix a memory leak in rpcb_getport_async
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Trond Myklebust <[email protected]>
commit 96165e2b7c4e2c82a0b60c766d4a2036444c21a0 upstream.
--- net/sunrpc/rpcb_clnt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/sunrpc/rpcb_clnt.c +3 -1
@@ -558,7 +558,7 @@ void rpcb_getport_async(struct rpc_task status = -ENOMEM ;dprintk ("RPC: %5u %s: no memory available\n" , task->tk_pid, __func__); - goto bailout_nofree; + goto bailout_release_client; } map->r_prog = clnt->cl_prog; map->r_vers = clnt->cl_vers;
@@ -583,6 +583,8 @@ void rpcb_getport_async(struct rpc_task task->tk_xprt->stat.bind_count++;return ; +bailout_release_client: +rpc_release_client (rpcb_clnt); bailout_nofree:rpcb_wake_rpcbind_waiters (xprt, status); task->tk_status = status;
PATCH 14/32 SUNRPC: Fix autobind on cloned rpc clients
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Trond Myklebust <[email protected]>
commit 9a4bd29fe8f6d3f015fe1c8e5450eb62cfebfcc9 upstream.
Despite the fact that cloned rpc clients won't have the cl_autobind flag set, they may still find themselves calling rpcb_getport_async(). For this to happen, it suffices for a _parent_ rpc_clnt to use autobinding, in which case any clone may find itself triggering the !xprt_bound() case in call_bind().
The correct fix for this is to walk back up the tree of cloned rpc clients, in order to find the parent that 'owns' the transport, either because it has clnt->cl_autobind set, or because it originally created the transport...
--- net/sunrpc/rpcb_clnt.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-)
net/sunrpc/rpcb_clnt.c +29 -7
@@ -469,6 +469,28 @@ static struct rpc_task *rpcb_call_async(return rpc_run_task (&task_setup_data); } +/* +* In the case where rpc clients have been cloned, we want to make +* sure that we use the program number/version etc of the actual +* owner of the xprt. To do so, we walk back up the tree of parents +* to find whoever created the transport and/or whoever has the +* autobind flag set. +*/ +static struct rpc_clnt *rpcb_find_transport_owner (struct rpc_clnt *clnt) +{ +struct rpc_clnt *parent = clnt->cl_parent; + +while (parent != clnt) { +if (parent->cl_xprt != clnt->cl_xprt) +break ; +if (clnt->cl_autobind) +break ; + clnt = parent; + parent = parent->cl_parent; + } +return clnt; +} +/** * rpcb_getport_async - obtain the port for a given RPC service on a given host * @task: task that is waiting for portmapper request
@@ -478,10 +500,10 @@ static struct rpc_task *rpcb_call_async(*/ void rpcb_getport_async (struct rpc_task *task) { -struct rpc_clnt *clnt = task->tk_client; +struct rpc_clnt *clnt;struct rpc_procinfo *proc;u32 bind_version; -struct rpc_xprt *xprt = task->tk_xprt; +struct rpc_xprt *xprt;struct rpc_clnt *rpcb_clnt;static struct rpcbind_args *map;struct rpc_task *child;
@@ -490,13 +512,13 @@ void rpcb_getport_async(struct rpc_tasksize_t salen;int status; + clnt =rpcb_find_transport_owner (task->tk_client); + xprt = clnt->cl_xprt; +dprintk ("RPC: %5u %s(%s, %u, %u, %d)\n" , task->tk_pid, __func__, clnt->cl_server, clnt->cl_prog, clnt->cl_vers, xprt->prot); -/* Autobind on cloned rpc clients is discouraged */ -BUG_ON (clnt->cl_parent != clnt); -/* Put self on the wait queue to ensure we get notified if * some other task is already attempting to bind the port */ rpc_sleep_on (&xprt->binding, task,NULL );
@@ -578,9 +600,9 @@ void rpcb_getport_async(struct rpc_task task->tk_pid, __func__);return ; } -rpc_put_task (child); - task->tk_xprt->stat.bind_count++; + xprt->stat.bind_count++; +rpc_put_task (child);return ; bailout_release_client:
PATCH 15/32 USB: fix char-device disconnect handling
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alan Stern <[email protected]>
commit 501950d846218ed80a776d2aae5aed9c8b92e778 upstream.
This patch (as1198) fixes a conceptual bug: Somewhere along the line we managed to confuse USB class devices with USB char devices. As a result, the code to send a disconnect signal to userspace would not be built if both CONFIG_USB_DEVICE_CLASS and CONFIG_USB_DEVICEFS were disabled.
The usb_fs_classdev_common_remove() routine has been renamed to usbdev_remove() and it is now called whenever any USB device is removed, not just when a class device is unregistered. The notifier registration and unregistration calls are no longer conditionally compiled. And since the common removal code will always be called as part of the char device interface, there's no need to call it again as part of the usbfs interface; thus the invocation of usb_fs_classdev_common_remove() has been taken out of usbfs_remove_device().
--- drivers/usb/core/devio.c | 20 ++++++++++++-------- drivers/usb/core/inode.c | 1 - drivers/usb/core/usb.h | 1 - 3 files changed, 12 insertions(+), 10 deletions(-)
drivers/usb/core/devio.c +12 -8
@@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file .release = usbdev_release, }; -void usb_fs_classdev_common_remove (struct usb_device *udev) +static void usbdev_remove (struct usb_device *udev) {struct dev_state *ps;struct siginfo sinfo;
@@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct u {if (dev->usb_classdev)device_unregister (dev->usb_classdev); -usb_fs_classdev_common_remove (dev); } -static int usb_classdev_notify (struct notifier_block *self, +#else +#define usb_classdev_add (dev) 0 +#define usb_classdev_remove (dev) do {} while (0) + +#endif + +static int usbdev_notify (struct notifier_block *self,unsigned long action,void *dev) {switch (action) {
@@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct nobreak ;case USB_DEVICE_REMOVE :usb_classdev_remove (dev); +usbdev_remove (dev);break ; }return NOTIFY_OK ; }static struct notifier_block usbdev_nb = { - .notifier_call = usb_classdev_notify, + .notifier_call = usbdev_notify, }; -#endif static struct cdev usb_device_cdev;
@@ -1797,9 +1802,8 @@ int __init usb_devio_init(void)* to /sys/dev */ usb_classdev_class->dev_kobj =NULL ; - -usb_register_notify (&usbdev_nb);#endif +usb_register_notify (&usbdev_nb); out:return retval;
@@ -1810,8 +1814,8 @@ error_cdev:void usb_devio_cleanup (void ) { -#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify (&usbdev_nb); +#ifdef CONFIG_USB_DEVICE_CLASS class_destroy (usb_classdev_class);#endif cdev_del (&usb_device_cdev);
drivers/usb/core/inode.c +0 -1
@@ -716,7 +716,6 @@ static void usbfs_remove_device(struct ufs_remove_file (dev->usbfs_dentry); dev->usbfs_dentry =NULL ; } -usb_fs_classdev_common_remove (dev); }static int usbfs_notify (struct notifier_block *self,unsigned long action,void *dev)
drivers/usb/core/usb.h +0 -1
@@ -145,7 +145,6 @@ extern struct usb_driver usbfs_driver;extern const struct file_operations usbfs_devices_fops;extern const struct file_operations usbdev_file_operations;extern void usbfs_conn_disc_event (void ); -extern void usb_fs_classdev_common_remove (struct usb_device *udev);extern int usb_devio_init (void );extern void usb_devio_cleanup (void );
PATCH 16/32 USB: storage: add unusual devs entry
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Oliver Neukum <[email protected]>
commit b90de8aea36ae6fe8050a6e91b031369c4f251b2 upstream.
This adds an unusual devs entry for 2116:0320
--- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/usb/storage/unusual_devs.h +6 -0
@@ -2047,6 +2047,12 @@ UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE), +UNUSUAL_DEV (0x2116 ,0x0320 ,0x0001 ,0x0001 , +"ST" , +"2A" , +US_SC_DEVICE ,US_PR_DEVICE ,NULL , + US_FL_FIX_CAPACITY), +/* patch submitted by Davide Perini <[email protected]> * and Renato Perini <[email protected]> */
PATCH 17/32 USB: usbmon: Implement compat_ioctl
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Pete Zaitcev <[email protected]>
commit 7abce6bedc118eb39fe177c2c26be5d008505c14 upstream.
Running a 32-bit usbmon(8) on 2.6.28-rc9 produces the following:
ioctl32(usbmon:28563): Unknown cmd fd(3) cmd(400c9206){t:ffffff92;sz:12} arg(ffd3f458) on /dev/usbmon0
It happens because the compatibility mode was implemented for 2.6.18 and not updated for the fsops.compat_ioctl API.
This patch relocates the pieces from under #ifdef CONFIG_COMPAT into compat_ioctl with no other changes except one new whitespace.
--- drivers/usb/mon/mon_bin.c | 105 ++++++++++++++++++++++++++++------------------ 1 file changed, 66 insertions(+), 39 deletions(-)
drivers/usb/mon/mon_bin.c +66 -39
@@ -37,6 +37,7 @@#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) +#ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
@@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *i }break ; -#ifdef CONFIG_COMPAT -case MON_IOCX_GET32 : { -struct mon_bin_get32 getb; - -if (copy_from_user (&getb, (void __user *)arg, -sizeof (struct mon_bin_get32 ))) -return -EFAULT ; - - ret =mon_bin_get_event (file, rp, -compat_ptr (getb.hdr32),compat_ptr (getb.data32), - getb.alloc32); - } -break ; -#endif -case MON_IOCX_MFETCH : {struct mon_bin_mfetch mfetch;
@@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *i }break ; +case MON_IOCG_STATS : { +struct mon_bin_stats __user *sp; +unsigned int nevents; +unsigned int ndropped; + +spin_lock_irqsave (&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost =0 ; +spin_unlock_irqrestore (&rp->b_lock, flags); + nevents =mon_bin_queued (rp); + + sp = (struct mon_bin_stats __user *)arg; +if (put_user (rp->cnt_lost, &sp->dropped)) +return -EFAULT ; +if (put_user (nevents, &sp->queued)) +return -EFAULT ; + + } +break ; + +default : +return -ENOTTY ; + } + +return ret; +} +#ifdef CONFIG_COMPAT +static long mon_bin_compat_ioctl (struct file *file, +unsigned int cmd,unsigned long arg) +{ +struct mon_reader_bin *rp = file->private_data; +int ret; + +switch (cmd) { + +case MON_IOCX_GET32 : { +struct mon_bin_get32 getb; + +if (copy_from_user (&getb, (void __user *)arg, +sizeof (struct mon_bin_get32 ))) +return -EFAULT ; + + ret =mon_bin_get_event (file, rp, +compat_ptr (getb.hdr32),compat_ptr (getb.data32), + getb.alloc32); +if (ret <0 ) +return ret; + } +return 0 ; +case MON_IOCX_MFETCH32 : {struct mon_bin_mfetch32 mfetch;
@@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *ireturn ret;if (put_user (ret, &uptr->nfetch32)) return -EFAULT; - ret =0 ; } -break ; -#endif - -case MON_IOCG_STATS : { -struct mon_bin_stats __user *sp; -unsigned int nevents; -unsigned int ndropped; - -spin_lock_irqsave (&rp->b_lock, flags); - ndropped = rp->cnt_lost; - rp->cnt_lost =0 ; -spin_unlock_irqrestore (&rp->b_lock, flags); - nevents =mon_bin_queued (rp); +return 0 ; - sp = (struct mon_bin_stats __user *)arg; -if (put_user (rp->cnt_lost, &sp->dropped)) -return -EFAULT ; -if (put_user (nevents, &sp->queued)) -return -EFAULT ; +case MON_IOCG_STATS : +return mon_bin_ioctl (NULL , file, cmd, + (unsigned long )compat_ptr (arg)); - } -break ; +case MON_IOCQ_URB_LEN : +case MON_IOCQ_RING_SIZE : +case MON_IOCT_RING_SIZE : +case MON_IOCH_MFLUSH : +return mon_bin_ioctl (NULL , file, cmd, arg);default : -return -ENOTTY ; + ; } - -return ret; +return -ENOTTY ; } +#endif /* CONFIG_COMPAT */ static unsigned int mon_bin_poll (struct file *file,struct poll_table_struct *wait)
@@ -1094,6 +1118,9 @@ static const struct file_operations mon_/* .write = mon_text_write, */ .poll = mon_bin_poll, .ioctl = mon_bin_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mon_bin_compat_ioctl, +#endif .release = mon_bin_release, .mmap = mon_bin_mmap, };
PATCH 18/32 ALSA: hda - add another MacBook Pro 4, 1 subsystem ID
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Luke Yelavich <[email protected]>
commit 2a88464ceb1bda2571f88902fd8068a6168e3f7b upstream.
Add another MacBook Pro 4,1 SSID (106b:3800). It seems that latter revisions, (at least mine), have different IDs to earlier revisions.
--- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -6631,6 +6631,7 @@ static int patch_alc882(struct hda_codeccase 0x106b00a1 :/* Macbook (might be wrong - PCI SSID?) */ case 0x106b2c00 :/* Macbook Pro rev3 */ case 0x106b3600 :/* Macbook 3.1 */ +case 0x106b3800 :/* MacbookPro4,1 - latter revision */ board_config =ALC885_MBP3 ;break ;default :
PATCH 19/32 ALSA: hda - Add quirk for HP DV6700 laptop
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joerg Schirottke <[email protected]>
commit aa9d823bb347fb66cb07f98c686be8bb85cb6a74 upstream.
Added the matching model=laptop for HP DV6700 laptop.
--- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_conexant.c +1 -0
@@ -1470,6 +1470,7 @@ static struct snd_pci_quirk cxt5047_cfg_SND_PCI_QUIRK (0x103c ,0x30a5 ,"HP DV5200T/DV8000T" ,CXT5047_LAPTOP_HP ),SND_PCI_QUIRK (0x103c ,0x30b2 ,"HP DV2000T/DV3000T" ,CXT5047_LAPTOP ),SND_PCI_QUIRK (0x103c ,0x30b5 ,"HP DV2000Z" ,CXT5047_LAPTOP ), +SND_PCI_QUIRK (0x103c ,0x30cf ,"HP DV6700" ,CXT5047_LAPTOP ), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD), {} };
PATCH 20/32 ALSA: hda - Fix PCM reference NID for STAC/IDT analog outputs
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
commit 00a602db1ce9d61319d6f769dee206ec85f19bda upstream.
The reference NID for the analog outputs of STAC/IDT codecs is set to a fixed number 0x02. But this isn't always correct and in many codecs it points to a non-existing NID.
This patch fixes the initialization of the PCM reference NID taken from the actually probed DAC list.
--- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+)
sound/pci/hda/patch_sigmatel.c +2 -0
@@ -2048,6 +2048,8 @@ static int stac92xx_build_pcms(struct hd info->name ="STAC92xx Analog" ; info->stream[SNDRV_PCM_STREAM_PLAYBACK ] = stac92xx_pcm_analog_playback; + info->stream[SNDRV_PCM_STREAM_PLAYBACK ].nid = + spec->multiout.dac_nids[0 ]; info->stream[SNDRV_PCM_STREAM_CAPTURE ] = stac92xx_pcm_analog_capture; info->stream[SNDRV_PCM_STREAM_CAPTURE ].nid = spec->adc_nids[0 ]; info->stream[SNDRV_PCM_STREAM_CAPTURE ].substreams = spec->num_adcs;
PATCH 21/32 bnx2x: Block nvram access when the device is inactive
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Eilon Greenstein <[email protected]>
commit 2add3acb11a26cc14b54669433ae6ace6406cbf2 upstream.
Don't dump eeprom when bnx2x adapter is down. Running ethtool -e causes an eeh without it when the device is down
--- drivers/net/bnx2x_main.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/bnx2x_main.c +3 -0
@@ -8078,6 +8078,9 @@ static int bnx2x_get_eeprom(struct net_dstruct bnx2x *bp =netdev_priv (dev);int rc; +if (!netif_running (dev)) +return -EAGAIN ; + DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
PATCH 22/32 crypto: authenc - Fix zero-length IV crash
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Herbert Xu <[email protected]>
commit 29b37f42127f7da511560a40ea74f5047da40c13 upstream.
As it is if an algorithm with a zero-length IV is used (e.g., NULL encryption) with authenc, authenc may generate an SG entry of length zero, which will trigger a BUG check in the hash layer.
This patch fixes it by skipping the IV SG generation if the IV size is zero.
--- crypto/authenc.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)
crypto/authenc.c +15 -9
@@ -157,16 +157,19 @@ static int crypto_authenc_genicv(struct dstp =sg_page (dst); vdst =PageHighMem (dstp) ?NULL :page_address (dstp) + dst->offset; -sg_init_table (cipher,2 ); -sg_set_buf (cipher, iv, ivsize); -authenc_chain (cipher, dst, vdst == iv + ivsize); +if (ivsize) { +sg_init_table (cipher,2 ); +sg_set_buf (cipher, iv, ivsize); +authenc_chain (cipher, dst, vdst == iv + ivsize); + dst = cipher; + } cryptlen = req->cryptlen + ivsize; - hash =crypto_authenc_hash (req, flags, cipher, cryptlen); + hash =crypto_authenc_hash (req, flags, dst, cryptlen);if (IS_ERR (hash))return PTR_ERR (hash); -scatterwalk_map_and_copy (hash, cipher, cryptlen, +scatterwalk_map_and_copy (hash, dst, cryptlen,crypto_aead_authsize (authenc),1 );return 0 ; }
@@ -284,11 +287,14 @@ static int crypto_authenc_iverify(struct srcp =sg_page (src); vsrc =PageHighMem (srcp) ?NULL :page_address (srcp) + src->offset; -sg_init_table (cipher,2 ); -sg_set_buf (cipher, iv, ivsize); -authenc_chain (cipher, src, vsrc == iv + ivsize); +if (ivsize) { +sg_init_table (cipher,2 ); +sg_set_buf (cipher, iv, ivsize); +authenc_chain (cipher, src, vsrc == iv + ivsize); + src = cipher; + } -return crypto_authenc_verify (req, cipher, cryptlen + ivsize); +return crypto_authenc_verify (req, src, cryptlen + ivsize); }static int crypto_authenc_decrypt (struct aead_request *req)
PATCH 23/32 crypto: ccm - Fix handling of null assoc data
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jarod Wilson <[email protected]>
commit 516280e735b034216de97eb7ba080ec6acbfc58f upstream.
Its a valid use case to have null associated data in a ccm vector, but this case isn't being handled properly right now.
The following ccm decryption/verification test vector, using the rfc4309 implementation regularly triggers a panic, as will any other vector with null assoc data:
* key: ab2f8a74b71cd2b1ff802e487d82f8b9
* iv: c6fb7d800d13abd8a6b2d8
* Associated Data: [NULL]
* Tag Length: 8
* input: d5e8939fc7892e2b
The resulting panic looks like so:
Unable to handle kernel paging request at ffff810064ddaec0 RIP: [<ffffffff8864c4d7>] :ccm:get_data_to_compute+0x1a6/0x1d6 PGD 8063 PUD 0 Oops: 0002 [1] SMP last sysfs file: /module/libata/version CPU 0 Modules linked in: crypto_tester_kmod(U) seqiv krng ansi_cprng chainiv rng ctr aes_generic aes_x86_64 ccm cryptomgr testmgr_cipher testmgr aead crypto_blkcipher crypto_a
lgapi des ipv6 xfrm_nalgo crypto_api autofs4 hidp l2cap bluetooth nfs lockd fscache nfs_acl sunrpc ip_conntrack_netbios_ns ipt_REJECT xt_state ip_conntrack nfnetlink xt_ tcpudp iptable_filter ip_tables x_tables dm_mirror dm_log dm_multipath scsi_dh dm_mod video hwmon backlight sbs i2c_ec button battery asus_acpi acpi_memhotplug ac lp sg snd_intel8x0 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss joydev snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ide_cd snd_pcm floppy parport_p c shpchp e752x_edac snd_timer e1000 i2c_i801 edac_mc snd soundcore snd_page_alloc i2c_core cdrom parport serio_raw pcspkr ata_piix libata sd_mod scsi_mod ext3 jbd uhci_h cd ohci_hcd ehci_hcd
Pid: 12844, comm: crypto-tester Tainted: G 2.6.18-128.el5.fips1 #1
RIP: 0010:[<ffffffff8864c4d7>] [<ffffffff8864c4d7>] :ccm:get_data_to_compute+0x1a6/0x1d6 RSP: 0018:ffff8100134434e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8100104898b0 RCX: ffffffffab6aea10 RDX: 0000000000000010 RSI: ffff8100104898c0 RDI: ffff810064ddaec0 RBP: 0000000000000000 R08: ffff8100104898b0 R09: 0000000000000000 R10: ffff8100103bac84 R11: ffff8100104898b0 R12: ffff810010489858 R13: ffff8100104898b0 R14: ffff8100103bac00 R15: 0000000000000000 FS: 00002ab881adfd30(0000) GS:ffffffff803ac000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff810064ddaec0 CR3: 0000000012a88000 CR4: 00000000000006e0 Process crypto-tester (pid: 12844, threadinfo ffff810013442000, task ffff81003d165860) Stack: ffff8100103bac00 ffff8100104898e8 ffff8100134436f8 ffffffff00000000 0000000000000000 ffff8100104898b0 0000000000000000 ffff810010489858 0000000000000000 ffff8100103bac00 ffff8100134436f8 ffffffff8864c634 Call Trace: [<ffffffff8864c634>] :ccm:crypto_ccm_auth+0x12d/0x140 [<ffffffff8864cf73>] :ccm:crypto_ccm_decrypt+0x161/0x23a [<ffffffff88633643>] :crypto_tester_kmod:cavs_test_rfc4309_ccm+0x4a5/0x559
[...]
The above is from a RHEL5-based kernel, but upstream is susceptible too.
The fix is trivial: in crypto/ccm.c:crypto_ccm_auth(), pctx->ilen contains whatever was in memory when pctx was allocated if assoclen is 0. The tested fix is to simply add an else clause setting pctx->ilen to 0 for the assoclen == 0 case, so that get_data_to_compute() doesn't try doing things its not supposed to.
--- crypto/ccm.c | 2 ++ 1 file changed, 2 insertions(+)
crypto/ccm.c +2 -0
@@ -266,6 +266,8 @@ static int crypto_ccm_auth(struct aead_rif (assoclen) { pctx->ilen =format_adata (idata, assoclen);get_data_to_compute (cipher, pctx, req->assoc, req->assoclen); + }else { + pctx->ilen =0 ; }/* compute plaintext into mac */
PATCH 24/32 epoll: drop max_user_instances and rely only on max_user_watches
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Davide Libenzi <[email protected]>
commit 9df04e1f25effde823a600e755b51475d438f56b upstream.
Linus suggested to put limits where the money is, and max_user_watches already does that w/out the need of max_user_instances. That has the advantage to mitigate the potential DoS while allowing pretty generous default behavior.
Allowing top 4% of low memory (per user) to be allocated in epoll watches, we have:
LOMEM MAX_WATCHES (per user) 512MB ~178000 1GB ~356000 2GB ~712000
A box with 512MB of lomem, will meet some challenge in hitting 180K watches, socket buffers math teaches us. No more max_user_instances limits then.
--- fs/eventpoll.c | 22 ++++------------------ include/linux/sched.h | 1 - 2 files changed, 4 insertions(+), 19 deletions(-)
fs/eventpoll.c +4 -18
@@ -234,8 +234,6 @@ struct ep_pqueue {/* * Configuration options available inside /proc/sys/fs/epoll/ */ -/* Maximum number of epoll devices, per user */ -static int max_user_instances__read_mostly ;/* Maximum number of epoll watched descriptors, per user */ static int max_user_watches__read_mostly ;
@@ -261,14 +259,6 @@ static int zero;ctl_table epoll_table[] = { { - .procname ="max_user_instances" , - .data = &max_user_instances, - .maxlen =sizeof (int ), - .mode =0644 , - .proc_handler = &proc_dointvec_minmax, - .extra1 = &zero, - }, - { .procname ="max_user_watches" , .data = &max_user_watches, .maxlen =sizeof (int ),
@@ -491,7 +481,6 @@ static void ep_free(struct eventpoll *epmutex_unlock (&epmutex);mutex_destroy (&ep->mtx); -atomic_dec (&ep->user->epoll_devs);free_uid (ep->user);kfree (ep); }
@@ -581,10 +570,6 @@ static int ep_alloc(struct eventpoll **pstruct eventpoll *ep; user =get_current_user (); - error = -EMFILE ; -if (unlikely (atomic_read (&user->epoll_devs) >= - max_user_instances)) - goto free_uid; error = -ENOMEM ; ep =kzalloc (sizeof (*ep),GFP_KERNEL );if (unlikely (!ep))
@@ -1137,7 +1122,6 @@ SYSCALL_DEFINE1(epoll_create1, int, flag flags & O_CLOEXEC);if (fd <0 )ep_free (ep); -atomic_inc (&ep->user->epoll_devs); error_return: DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
@@ -1362,8 +1346,10 @@ static int __init eventpoll_init(void)struct sysinfo si;si_meminfo (&si); - max_user_instances =128 ; - max_user_watches = (((si.totalram - si.totalhigh) /32 ) <<PAGE_SHIFT ) / +/* +* Allows top 4% of lomem to be allocated for epoll watches (per user). +*/ + max_user_watches = (((si.totalram - si.totalhigh) /25 ) <<PAGE_SHIFT ) /EP_ITEM_COST ;/* Initialize the structure used to perform safe poll wait head wake ups */
include/linux/sched.h +0 -1
@@ -588,7 +588,6 @@ struct user_struct {atomic_t inotify_devs;/* How many inotify devs does this user have opened? */ #endif #ifdef CONFIG_EPOLL -atomic_t epoll_devs;/* The number of epoll descriptors currently open */ atomic_t epoll_watches;/* The number of file descriptors currently watched */ #endif #ifdef CONFIG_POSIX_MQUEUE
PATCH 25/32 ext3: Add sanity check to make_indexed_dir
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Theodore Ts'o <[email protected]>
commit a21102b55c4f8dfd3adb4a15a34cd62237b46039 upstream.
Make sure the rec_len field in the '..' entry is sane, lest we overrun the directory block and cause a kernel oops on a purposefully corrupted filesystem.
This fixes a bug related to a bug originally reported by Sami Liedes for ext4 at:
http://bugzilla.kernel.org/show_bug.cgi?id=12430
--- fs/ext3/namei.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
fs/ext3/namei.c +14 -6
@@ -1374,7 +1374,7 @@ static int make_indexed_dir(handle_t *hastruct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; -dxtrace (printk ("Creating index\n" )); +dxtrace (printk (KERN_DEBUG "Creating index: inode %lu\n" , dir->i_ino)); retval =ext3_journal_get_write_access (handle, bh);if (retval) {ext3_std_error (dir->i_sb, retval);
@@ -1383,6 +1383,19 @@ static int make_indexed_dir(handle_t *ha } root = (struct dx_root *) bh->b_data; +/* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext3_dir_entry_2 *)((char *)fde + +ext3_rec_len_from_disk (fde->rec_len)); +if ((char *) de >= (((char *) root) + blocksize)) { +ext3_error (dir->i_sb, __func__, +"invalid rec_len for '..' in inode %lu" , + dir->i_ino); +brelse (bh); +return -EIO ; + } + len = ((char *) root) + blocksize - (char *) de; + bh2 =ext3_append (handle, dir, &block, &retval);if (!(bh2)) {brelse (bh);
@@ -1391,11 +1404,6 @@ static int make_indexed_dir(handle_t *haEXT3_I (dir)->i_flags |=EXT3_INDEX_FL ; data1 = bh2->b_data; -/* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext3_dir_entry_2 *)((char *)fde + -ext3_rec_len_from_disk (fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de;memcpy (data1, de, len); de = (struct ext3_dir_entry_2 *) data1; top = data1 + len;
PATCH 26/32 include/linux: Add bsg.h to the Kernel exported headers
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Boaz Harrosh <[email protected]>
commit a229fc61ef0ee3c30fd193beee0eeb87410227f1 upstream.
bsg.h in current form is perfectly suitable for user-mode consumption. It is needed together with scsi/sg.h for applications that want to interface with the bsg driver.
Currently the few projects that use it would copy it over into the projects. But that is not acceptable for projects that need to provide source and devel packages for distros.
This should also be submitted to stable 2.6.28 and 2.6.27 since bsg had a stable API since these Kernels and distro users will need the header for these kernels a swell
--- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+)
include/linux/Kbuild +1 -0
@@ -41,6 +41,7 @@ header-y += baycom.h header-y += bfs_fs.h header-y += blkpg.h header-y += bpqether.h +header-y += bsg.h header-y += can.h header-y += cdk.h header-y += chio.h
PATCH 27/32 sgi-xpc: ensure flags are updated before bte_copy
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Robin Holt <[email protected]>
commit 69b3bb65fa97a1e8563518dbbc35cd57beefb2d4 upstream.
The clearing of the msg->flags needs a barrier between it and the notify of the channel threads that the messages are cleaned and ready for use.
--- drivers/misc/sgi-xp/xpc_sn2.c | 9 +++++---- drivers/misc/sgi-xp/xpc_uv.c | 2 +- 2 files changed, 6 insertions(+), 5 deletions(-)
drivers/misc/sgi-xp/xpc_sn2.c +5 -4
@@ -1841,6 +1841,7 @@ xpc_process_msg_chctl_flags_sn2(struct x*/ xpc_clear_remote_msgqueue_flags_sn2 (ch); +smp_wmb ();/* ensure flags have been cleared before bte_copy */ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
@@ -1939,7 +1940,7 @@ xpc_get_deliverable_payload_sn2(struct xbreak ; get = ch_sn2->w_local_GP.get; -rmb ();/* guarantee that .get loads before .put */ +smp_rmb ();/* guarantee that .get loads before .put */ if (get == ch_sn2->w_remote_GP.put)break ;
@@ -2058,7 +2059,7 @@ xpc_allocate_msg_sn2(struct xpc_channelwhile (1 ) { put = ch_sn2->w_local_GP.put; -rmb ();/* guarantee that .put loads before .get */ +smp_rmb ();/* guarantee that .put loads before .get */ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {/* There are available message entries. We need to try
@@ -2191,7 +2192,7 @@ xpc_send_payload_sn2(struct xpc_channel* The preceding store of msg->flags must occur before the following * load of local_GP->put. */ -mb (); +smp_mb ();/* see if the message is next in line to be sent, if so send it */
@@ -2292,7 +2293,7 @@ xpc_received_payload_sn2(struct xpc_chan* The preceding store of msg->flags must occur before the following * load of local_GP->get. */ -mb (); +smp_mb ();/* * See if this message is next in line to be acknowledged as having
drivers/misc/sgi-xp/xpc_uv.c +1 -1
@@ -1238,7 +1238,7 @@ xpc_send_payload_uv(struct xpc_channel *atomic_inc (&ch->n_to_notify); msg_slot->key = key; -wmb ();/* a non-NULL func must hit memory after the key */ +smp_wmb ();/* a non-NULL func must hit memory after the key */ msg_slot->func = func;if (ch->flags &XPC_C_DISCONNECTING ) {
PATCH 28/32 sgi-xpc: Remove NULL pointer dereference.
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Robin Holt <[email protected]>
commit 17e2161654da4e6bdfd8d53d4f52e820ee93f423 upstream.
If the bte copy fails, the attempt to retrieve payloads merely returns a null pointer deref and not NULL as was expected.
--- drivers/misc/sgi-xp/xpc_sn2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/misc/sgi-xp/xpc_sn2.c +6 -4
@@ -1962,11 +1962,13 @@ xpc_get_deliverable_payload_sn2(struct x msg =xpc_pull_remote_msg_sn2 (ch, get); -DBUG_ON (msg !=NULL && msg->number != get); -DBUG_ON (msg !=NULL && (msg->flags &XPC_M_SN2_DONE )); -DBUG_ON (msg !=NULL && !(msg->flags &XPC_M_SN2_READY )); +if (msg !=NULL ) { +DBUG_ON (msg->number != get); +DBUG_ON (msg->flags &XPC_M_SN2_DONE ); +DBUG_ON (!(msg->flags &XPC_M_SN2_READY )); - payload = &msg->payload; + payload = &msg->payload; + }break ; }
PATCH 29/32 sound: virtuoso: do not overwrite EEPROM on Xonar D2/D2X
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Clemens Ladisch <[email protected]>
commit 7e86c0e6850504ec9516b953f316a47277825e33 upstream.
On the Asus Xonar D2 and D2X models, the SPI chip select signal for the fourth DAC shares its pin with the serial clock for the EEPROM that contains the PCI subdevice ID values. It appears that when DAC registers are written and some other unknown conditions occur (probably noise on the EEPROM's chip select line), the EEPROM gets overwritten with garbage, which makes it impossible to properly detect the card later.
Therefore, we better avoid DAC register writes and make sure that the driver works with the DAC's registers' default values. Consequently, the sample format is now I2S instead of left-justified (no user-visible change), and the DAC's volume/mute registers cannot be used anymore (volume changes are now done by the software volume plugin).
--- sound/pci/oxygen/virtuoso.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-)
sound/pci/oxygen/virtuoso.c +15 -7
@@ -26,7 +26,7 @@* SPI 0 -> 1st PCM1796 (front) * SPI 1 -> 2nd PCM1796 (surround) * SPI 2 -> 3rd PCM1796 (center/LFE) -* SPI 4 -> 4th PCM1796 (back) +* SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!) * * GPIO 2 -> M0 of CS5381 * GPIO 3 -> M1 of CS5381
@@ -142,6 +142,12 @@ struct xonar_data {static void pcm1796_write (struct oxygen *chip,unsigned int codec,u8 reg,u8 value) { +/* +* We don't want to do writes on SPI 4 because the EEPROM, which shares +* the same pin, might get confused and broken. We'd better take care +* that the driver works with the default register values ... +*/ +#if 0 /* maps ALSA channel pair number to SPI output */ static const u8 codec_map[4 ] = { 0, 1, 2, 4
@@ -152,6 +158,7 @@ static void pcm1796_write(struct oxygen (codec_map[codec] <<OXYGEN_SPI_CODEC_SHIFT ) |OXYGEN_SPI_CEN_LATCH_CLOCK_HI , (reg << 8) | value); +#endif }static void cs4398_write (struct oxygen *chip,u8 reg,u8 value)
@@ -539,6 +546,9 @@ static const DECLARE_TLV_DB_SCALE(cs4362static int xonar_d2_control_filter (struct snd_kcontrol_new *template) { +if (!strncmp (template->name,"Master Playback " ,16 )) +/* disable volume/mute because they would require SPI writes */ +return 1 ;if (!strncmp (template->name,"CD Capture " ,11 ))/* CD in is actually connected to the video in pin */ template->private_value ^=AC97_CD ^AC97_VIDEO ;
@@ -588,9 +598,8 @@ static const struct oxygen_model xonar_m .dac_volume_min = 0x0f, .dac_volume_max = 0xff, .misc_flags = OXYGEN_MISC_MIDI, - .function_flags =OXYGEN_FUNCTION_SPI | - OXYGEN_FUNCTION_ENABLE_SPI_4_5, - .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, + .function_flags = OXYGEN_FUNCTION_SPI, + .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S, .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }, [MODEL_D2X] = {
@@ -619,9 +628,8 @@ static const struct oxygen_model xonar_m .dac_volume_min = 0x0f, .dac_volume_max = 0xff, .misc_flags = OXYGEN_MISC_MIDI, - .function_flags =OXYGEN_FUNCTION_SPI | - OXYGEN_FUNCTION_ENABLE_SPI_4_5, - .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, + .function_flags = OXYGEN_FUNCTION_SPI, + .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S, .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }, [MODEL_D1] = {
PATCH 30/32 rtl8187: Fix error in setting OFDM power settings for RTL8187L
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Larry Finger <[email protected]>
commit eb83bbf57429ab80f49b413e3e44d3b19c3fdc5a upstream.
After reports of poor performance, a review of the latest vendor driver (rtl8187_linux_26.1025.0328.2007) for RTL8187L devices was undertaken.
A difference was found in the code used to index the OFDM power tables. When the Linux driver was changed, my unit works at a much greater range than before. I think this fixes Bugzilla #12380 and has been tested by at least two other users.
--- drivers/net/wireless/rtl8187_rtl8225.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/net/wireless/rtl8187_rtl8225.c +8 -2
@@ -287,7 +287,10 @@ static void rtl8225_rf_set_tx_power(stru ofdm_power = priv->channels[channel -1 ].hw_value >>4 ; cck_power =min (cck_power, (u8 )11 ); - ofdm_power =min (ofdm_power, (u8 )35 ); +if (ofdm_power > (u8 )15 ) + ofdm_power =25 ; +else + ofdm_power +=10 ;rtl818x_iowrite8 (priv, &priv->map->TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[cck_power /6 ] >>1 );
@@ -540,7 +543,10 @@ static void rtl8225z2_rf_set_tx_power(st cck_power += priv->txpwr_base &0xF ; cck_power =min (cck_power, (u8 )35 ); - ofdm_power =min (ofdm_power, (u8 )15 ); +if (ofdm_power > (u8 )15 ) + ofdm_power =25 ; +else + ofdm_power +=10 ; ofdm_power += priv->txpwr_base >>4 ; ofdm_power =min (ofdm_power, (u8 )35 );
PATCH 31/32 PCI hotplug: fix lock imbalance in pciehp
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jiri Slaby <[email protected]>
commit c2fdd36b550659f5ac2240d1f5a83ffa1a092289 upstream.
set_lock_status omits mutex_unlock in fail path. Add the omitted unlock.
As a result a lockup caused by this can be triggered from userspace by writing 1 to /sys/bus/pci/slots/.../lock often enough.
--- drivers/pci/hotplug/pciehp_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/hotplug/pciehp_core.c +3 -1
@@ -126,8 +126,10 @@ static int set_lock_status(struct hotplumutex_lock (&slot->ctrl->crit_sect);/* has it been >1 sec since our last toggle? */ -if ((get_seconds () - slot->last_emi_toggle) <1 ) +if ((get_seconds () - slot->last_emi_toggle) <1 ) { +mutex_unlock (&slot->ctrl->crit_sect);return -EINVAL ; + }/* see what our current state is */ retval =get_lock_status (hotplug_slot, &value);
PATCH 32/32 relay: fix lock imbalance in relay_late_setup_files
In reply to Greg KH2.6.27-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jiri Slaby <[email protected]>
commit b786c6a98ef6fa81114ba7b9fbfc0d67060775e3 upstream.
One fail path in relay_late_setup_files() omitsmutex_unlock(&relay_channels_mutex);
Add it.
--- kernel/relay.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/relay.c +3 -1
@@ -664,8 +664,10 @@ int relay_late_setup_files(struct rchanmutex_lock (&relay_channels_mutex);/* Is chan already set up? */ -if (unlikely (chan->has_base_filename)) +if (unlikely (chan->has_base_filename)) { +mutex_unlock (&relay_channels_mutex);return -EEXIST ; + } chan->has_base_filename =1 ; chan->parent = parent; curr_cpu =get_cpu ();
For -stable: sata_mv: fix 8-port timeouts on 508x/6081 chips
In reply to Greg KHcommit b0bccb18bc523d1d5060d25958f12438062829a9
Author: Mark Lord <[email protected]> Date: Mon Jan 19 18:04:37 2009 -0500
sata_mv: fix 8-port timeouts on 508x/6081 chips
Fix a longstanding bug for the 8-port Marvell Sata controllers (508x/6081), where accesses to the upper 4 ports would cause lost-interrupts / timeouts for the lower 4-ports. With this patch, the 6081 boards should finally be reliable enough for mainstream use with Linux.
This should be backported to all -stable kernels.
Cheers
Re: [stable] For -stable: sata_mv: fix 8-port timeouts on 508x/6081 chips
Quoted 11 lines · Mark Lord
commit
b0bccb18bc523d1d5060d25958f12438062829a9Author: Mark Lord <[email protected]> Date: Mon Jan 19 18:04:37 2009 -0500
sata_mv: fix 8-port timeouts on 508x/6081 chipsFix a longstanding bug for the 8-port Marvell Sata controllers (508x/6081), where accesses to the upper 4 ports would cause lost-interrupts / timeouts for the lower 4-ports. With this patch, the 6081 boards should finally be reliable enough for mainstream use with Linux.
Quoted 5 lines
Signed-off-by Mark Lord <[email protected]>Signed-off-by Jeff Garzik <[email protected]>This should be backported to all -stable kernels.
Thanks, I'll queue this up for the next releases after these come out.
greg k-h
Re: For -stable: sata_mv: fix 8-port timeouts on 508x/6081 chips
In reply to Mark LordQuoted 12 lines · Mark Lord
commit
b0bccb18bc523d1d5060d25958f12438062829a9Author: Mark Lord <[email protected]> Date: Mon Jan 19 18:04:37 2009 -0500
sata_mv: fix 8-port timeouts on 508x/6081 chips
Fix a longstanding bug for the 8-port Marvell Sata controllers
(508x/6081),
where accesses to the upper 4 ports would cause lost-interrupts /
timeouts
for the lower 4-ports. With this patch, the 6081 boards should
finally be
reliable enough for mainstream use with Linux.
Quoted 5 lines
Signed-off-by Mark Lord <[email protected]>Signed-off-by Jeff Garzik <[email protected]>This should be backported to all -stable kernels.
ACK / agreed