support for channel numbers in scan with Finnish DVB-C Welho
PATCH 1/1 support for channel numbers in scan with Finnish DVB-C Welho
Hi,
Attached is small patch to enable channel numbering for FI DVB-C Welho (similar to UK Freeview). Works for me though resulting list needs to be sorted before using or else VDR gets channel numbers wrong.
Signature · 3 lines
Anssi Kolehmainen [email protected] 040-5085390
util/scan/scan.c +18 -1
@@ -363,6 +363,16 @@ } buf +=4 ; } +} + +static void parse_cable_fi_channel_number (const unsigned char *buf,struct service *s) +{ +//We should have four bytes of data +if (buf[1 ] !=0x04 ) +return ; + + s->channel_num = buf[3 ]; +verbosedebug ("Channel number is %d\n" , s->channel_num); }
@@ -685,6 +695,13 @@* problems when 0x83 is something entirely different... */ if (t ==NIT && vdr_dump_channum)parse_terrestrial_uk_channel_number (buf, data); +break ; + +case 0x91 : +/* 0x91 is also in private range so parse only when we want +* channel numbers */ +if (t ==SDT && vdr_dump_channum) +parse_cable_fi_channel_number (buf, data);break ;default :
@@ -2103,7 +2120,7 @@" Vdr version 1.3.x and up implies -p.\n" " -l lnb-type (DVB-S Only) (use -l help to print types) or \n" " -l low[,high[,switch]] in Mhz\n" -" -u UK DVB-T Freeview channel numbering for VDR\n\n" +" -u UK DVB-T Freeview / FI DVB-C Welho channel numbering for VDR\n\n" " -P do not use ATSC PSIP tables for scanning\n" " (but only PAT and PMT) (applies for ATSC only)\n" " -A N check for ATSC 1=Terrestrial [default], 2=Cable or 3=both\n"