OMAP3: Low DDR Memory bandwidth
Hi All,
I am using OMAP3EVM and measuring DDR memory bandwidth. Used "lmbench" to measure the bandwidth. I am getting low bandwidth around 460 MB/S in TI kernel 2.6.22 and getting bandwidth around 800 MB/S in git kernel 2.6.28-rc8.
In kernel 2.6.22, there are two SDRC registers (SDRC_DLLA_CTRL and SDRC_POWER_REG), which are getting modified. I have updated code such that SDRC values for both the the kernel 2.6.22 and 2.6.28 are same. After this updation there is no improvement in the bandwidth. The SDRC is running at 166MHz. I am using same x-loader and u-boot for both the kernel (2.6.22 and 2.6.28).
Can you please suggest some pointers/methods, to increase the DDR memroy bandwidth in 2.6.22 TI kernel.
Thanks in advance.
With Regards
Ganeshan
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 13 lines · On Wednesday 04 of February 2009 13:47:41 Ganeshan N wrote:
Hi All,
I am using OMAP3EVM and measuring DDR memory bandwidth. Used "lmbench" to measure the bandwidth. I am getting low bandwidth around 460 MB/S in TI kernel 2.6.22 and getting bandwidth around 800 MB/S in git kernel 2.6.28-rc8.In kernel 2.6.22, there are two SDRC registers (
SDRC_DLLA_CTRLandSDRC_POWER_REG), which are getting modified. I have updated code such that SDRC values for both the the kernel 2.6.22 and 2.6.28 are same. After this updation there is no improvement in the bandwidth. The SDRC is running at 166MHz. I am using same x-loader and u-boot for both the kernel (2.6.22 and 2.6.28).
Quoted 4 lines
Can you please suggest some pointers/methods, to increase the DDR memroy bandwidth in 2.6.22 TI kernel.
Thanks in advance.
why don't you use the .28 one then ? .22 is way too deprecated.
Quoted 8 lines
With Regards
Ganeshan
Quoted 4 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 13 lines · Ganeshan N
Hi All,
I am using OMAP3EVM and measuring DDR memory bandwidth. Used "lmbench" to measure the bandwidth. I am getting low bandwidth around 460 MB/S in TI kernel 2.6.22 and getting bandwidth around 800 MB/S in git kernel 2.6.28-rc8.In kernel 2.6.22, there are two SDRC registers (
SDRC_DLLA_CTRLandSDRC_POWER_REG), which are getting modified. I have updated code such that SDRC values for both the the kernel 2.6.22 and 2.6.28 are same. After this updation there is no improvement in the bandwidth. The SDRC is running at 166MHz. I am using same x-loader and u-boot for both the kernel (2.6.22 and 2.6.28).
Quoted 2 lines
Can you please suggest some pointers/methods, to increase the DDR memroy bandwidth in 2.6.22 TI kernel.
Check your cache settings. Enabling or disabling the L2 cache can have dramatic effects on memory throughput. For mainly sequential accesses disabling it can be faster.
Signature · 7 lines
Måns Rullgård [email protected] -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html