Skip to contentSkip to conversation

at76c50x-usb: mac80211 port of at76_usb

PATCH In review Kalle Valo 2 participants 5 messages Feb 7, 2009 – Feb 18, 2009 Networking drivers (wireless)

lore
Share & tools
lore

Kalle Valo

author
#0 lore raw

PATCH 1/1 at76c50x-usb: mac80211 port of at76_usb

Here's the first version of at76c50x-usb which is a mac80211 port from at76_usb, which included own 802.11 stack. The driver has received almost no testing, I just associated few to times to an AP using WEP and iwconfig.

My quick test showed problems already, for example sometimes I had to set essid twice before the driver associated. And I'm sure there are also loads of other issues. Patches welcome :)

The driver is based on at76_usb mac80211 patches[1] plus some cosmetic changes to reflect the name change. Also I dropped the wpa patches for now due to stability issues. I'll readd wpa support after the driver is stable enough.

John, please consider this driver as inclusion to the linux-testing tree. I don't consider this ready for mainline yet, I want to test this more first in case there are critical bugs.

[1] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-legacy.git;a=shortlog;h=at76

---

Kalle Valo (1):

      at76c50x-usb: add driver
 drivers/net/wireless/Kconfig        |    8 
 drivers/net/wireless/Makefile       |    2 
 drivers/net/wireless/at76c50x-usb.c | 2465 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/at76c50x-usb.h |  463 +++++++
 4 files changed, 2938 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/wireless/at76c50x-usb.c
 create mode 100644 drivers/net/wireless/at76c50x-usb.h
author
#1 lore raw

PATCH 1/1 at76c50x-usb: add driver

This is a driver for usb devices based on at76c50x chipset. This is a mac80211 port of the original at76_usb driver.

---

 drivers/net/wireless/Kconfig        |    8 
 drivers/net/wireless/Makefile       |    2 
 drivers/net/wireless/at76c50x-usb.c | 2465 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/at76c50x-usb.h |  463 +++++++
 4 files changed, 2938 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/wireless/at76c50x-usb.c
 create mode 100644 drivers/net/wireless/at76c50x-usb.h
drivers/net/wireless/Kconfig +8 -0
index fe819a7..1294175 100644
@@ -228,6 +228,14 @@ config PCMCIA_ATMEL
 	  Enable support for PCMCIA cards containing the
 	  Atmel at76c502 and at76c504 chips.
 
+config AT76C50X_USB
+        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+        depends on MAC80211 && WLAN_80211 && USB
+        select FW_LOADER
+        ---help---
+          Enable support for USB Wireless devices using Atmel at76c503,
+          at76c505 or at76c505a chips.
+
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 	depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
drivers/net/wireless/Makefile +2 -0
index ac590e1..e2574ca 100644
@@ -24,6 +24,8 @@ obj-$(CONFIG_ATMEL)             += atmel.o
 obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
 obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
 
+obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o
+
 obj-$(CONFIG_PRISM54)		+= prism54/
 
 obj-$(CONFIG_HOSTAP)		+= hostap/
drivers/net/wireless/at76c50x-usb.c new file +2465 -0

2,465 lines not on this page · raw message

drivers/net/wireless/at76c50x-usb.h new file +463 -0

463 lines not on this page · raw message

author
#2 lore raw
In reply to Kalle Valo
Quoted 3 lines · Kalle Valo

John, please consider this driver as inclusion to the linux-testing tree. I don't consider this ready for mainline yet, I want to test this more first in case there are critical bugs.

I have been testing this for few hours now on ubuntu 8.10 with networkmanager. With iperf I got this warning in some cases:

phy0: at76_mac80211_tx called while tx urb is pending

Also sometimes first association attempt failed and a second attempt was needed, but otherwise the driver seems to be usable, at least for me. The device I used for testing:

Bus 002 Device 006: ID 050d:0050 Belkin Components F5D6050 802.11b Wireless Adapter

Kalle

#3 lore raw
Quoted 8 lines · Kalle Valo
Quoted 3 lines · Kalle Valo

John, please consider this driver as inclusion to the linux-testing tree. I don't consider this ready for mainline yet, I want to test this more first in case there are critical bugs.

I have been testing this for few hours now on ubuntu 8.10 with networkmanager. With iperf I got this warning in some cases:

Quoted 8 lines

phy0: at76_mac80211_tx called while tx urb is pending

Also sometimes first association attempt failed and a second attempt was needed, but otherwise the driver seems to be usable, at least for me. The device I used for testing:

Bus 002 Device 006: ID 050d:0050 Belkin Components F5D6050 802.11b Wireless Adapter

After applying the patch to wireless-testing master-2009-02-11, I tried it out to poor results.

Attaching my Linksys WUSB11 results in an Oops. Unfortunately, 2.6.29-rc4 has problems with my e1000e, so I cannot set up a netconsole. I will continue to investigate, but all I have for now is the below logs.

Jason

Feb 13 13:11:16 rainbow kernel: [  371.980119] usb 3-2: new full speed
USB device using uhci_hcd and address 2
Feb 13 13:11:16 rainbow kernel: [  372.129492] usb 3-2: configuration
#1 chosen from 1 choice
Feb 13 13:11:16 rainbow kernel: [  372.196265] at76c50x_usb:
`0xb002c001' invalid for parameter `debug'
Feb 13 13:14:42 rainbow kernel: [  578.488148] usb 3-2: USB
disconnect, address 2
Feb 13 13:14:46 rainbow kernel: [  582.232074] usb 3-2: new full speed
USB device using uhci_hcd and address 3
Feb 13 13:14:46 rainbow kernel: [  582.381458] usb 3-2: configuration
#1 chosen from 1 choice
Feb 13 13:14:46 rainbow kernel: [  582.441646] Atmel at76x USB
Wireless LAN Driver 0.17 loading
Feb 13 13:14:46 rainbow kernel: [  582.441711] usb 3-2: firmware:
requesting atmel_at76c503-i3861.bin
Feb 13 13:14:46 rainbow kernel: [  582.500287] usb 3-2: using firmware
atmel_at76c503-i3861.bin (version 0.90.0-44)
Feb 13 13:14:46 rainbow kernel: [  582.515108] phy2: Selected rate
control algorithm 'minstrel'
Feb 13 13:14:46 rainbow kernel: [  582.517798] phy2: USB 3-2:1.0, MAC
00:06:25:00:6a:7a, firmware 0.90.0-2
Feb 13 13:14:46 rainbow kernel: [  582.517804] phy2: regulatory domain
0x10: FCC (USA)
Feb 13 13:14:46 rainbow kernel: [  582.517858] usbcore: registered new
interface driver at76c50x-usb
Feb 13 13:14:46 rainbow kernel: [  582.530931] udev: renamed network

interface wlan0 to wlan3

author
#4 lore raw
Quoted 12 lines · Jason Andryuk
Quoted 11 lines

I have been testing this for few hours now on ubuntu 8.10 with networkmanager. With iperf I got this warning in some cases:

phy0: at76_mac80211_tx called while tx urb is pending

Also sometimes first association attempt failed and a second attempt was needed, but otherwise the driver seems to be usable, at least for me. The device I used for testing:

Bus 002 Device 006: ID 050d:0050 Belkin Components F5D6050 802.11b Wireless Adapter

Quoted 7 lines

After applying the patch to wireless-testing master-2009-02-11, I tried it out to poor results.

Attaching my Linksys WUSB11 results in an Oops. Unfortunately, 2.6.29-rc4 has problems with my e1000e, so I cannot set up a netconsole. I will continue to investigate, but all I have for now is the below logs.

Thanks for testing. I see also oopses now and I'm looking at your patches.

Signature · 1 line
Kalle Valo