Skip to contentSkip to conversation

Philips SPC 600 NCP

DISCUSSION Curtis Schroeder 5 participants 6 messages Feb 7, 2009 – Feb 13, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

I recently picked up a Philips SPC 600 NC web cam on clearance, because I had read in the Ekiga documentation that most Philips web cams were compatible. Evidently the SPC 600 NC currently is not compatible with Linux. I've downloaded and installed gspca-4d0827823ebc in my 64-bit Ubuntu 8.10 installation, but
it reports in dmesg that it does not recognize the sensor. Is there a
utility I can run and report the results back to this list that would
help get this situation corrected?

Curt

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#1 lore raw

Philips saa6752hs mpeg encoder recommendation

Hello all,

I'd like to do some mpeg encoder testing on linux with the Philips saa6752hs mpeg encoder but I'm having a difficult time finding PCI cards that use the chip.

If anyone has any recommendations on cards that make use of the Philips saa6752hs chip and associated linux driver, I'd really appreciate the info. Especially cards that are still available new or readily available used.

Thanks,
Brian

Quoted 6 lines · Curtis Schroeder

I recently picked up a Philips SPC 600 NC web cam on clearance, because I had read in the Ekiga documentation that most Philips web cams were compatible. Evidently the SPC 600 NC currently is not compatible with Linux. I've downloaded and installed gspca-4d0827823ebc in my 64-bit Ubuntu 8.10 installation, but
it reports in dmesg that it does not recognize the sensor. Is there a
utility I can run and report the results back to this list that would
help get this situation corrected?

Quoted 10 lines

Curt

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#2 lore raw

Re: Philips saa6752hs mpeg encoder recommendation

Hi Brian

Quoted 10 lines

Hello all,

I'd like to do some mpeg encoder testing on linux with the Philips saa6752hs mpeg encoder but I'm having a difficult time finding PCI cards that use the chip.

If anyone has any recommendations on cards that make use of the Philips saa6752hs chip and associated linux driver, I'd really appreciate the info. Especially cards that are still available new or readily available used.

Our TV tuners has hardware MPEG encoder saa6752hs:
BeholdTV M6
BeholdTV M63
BeholdTV M6 Extra

We made support this cards in Linux with Hans Verkuil (big thanks). See saa7134-empress.c and saa6752hs.c source code (in media/video/saa7134 folder).

And bad news. You can't buy our card outside of Russia.

With my best regards, Dmitry.

Quoted 27 lines

Thanks,
Brian

Quoted 13 lines · Curtis Schroeder

I recently picked up a Philips SPC 600 NC web cam on clearance, because I had read in the Ekiga documentation that most Philips web cams were compatible. Evidently the SPC 600 NC currently is not compatible with Linux. I've downloaded and installed gspca-4d0827823ebc in my 64-bit Ubuntu 8.10 installation, but it reports in dmesg that it does not recognize the sensor. Is there a utility I can run and report the results back to this list that would help get this situation corrected?

Curt

Quoted 7 lines

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Quoted 5 lines

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#3 lore raw

Re: Philips saa6752hs mpeg encoder recommendation

Hi,

Am Samstag, den 07.02.2009, 10:43 +0900 schrieb Dmitri Belimov:

Quoted 13 lines

Hi Brian

Quoted 10 lines

Hello all,

I'd like to do some mpeg encoder testing on linux with the Philips saa6752hs mpeg encoder but I'm having a difficult time finding PCI cards that use the chip.

If anyone has any recommendations on cards that make use of the Philips saa6752hs chip and associated linux driver, I'd really appreciate the info. Especially cards that are still available new or readily available used.

Quoted 4 lines

Our TV tuners has hardware MPEG encoder saa6752hs:
BeholdTV M6
BeholdTV M63
BeholdTV M6 Extra

I was just about to point to you.

Quoted 4 lines

We made support this cards in Linux with Hans Verkuil (big thanks). See saa7134-empress.c and saa6752hs.c source code (in media/video/saa7134 folder).

And bad news. You can't buy our card outside of Russia.

Hmm, assuming you have still some amount of chips, why you don't try to sell global like all others do after all the work you had to get the mess sorted?

Given that nvidia and others have GPU hardware acceleration for HDTV more or less ready, even with GNU/Linux on current cheap supermarket PCs, what to wait for?

The remaining market is _now_ and not in any future.

Quoted 1 line

With my best regards, Dmitry.

Best as well, get them out.

Cheers,
Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#4 lore raw
In reply to Curtis Schroeder
Quoted 8 lines · On Fri, 6 Feb 2009 16:47:49 -0800 (PST) Curtis Schroeder…

I recently picked up a Philips SPC 600 NC web cam on clearance, because I had read in the Ekiga documentation that most Philips web cams were compatible. Evidently the SPC 600 NC currently is not compatible with Linux. I've downloaded and installed gspca-4d0827823ebc in my 64-bit Ubuntu 8.10 installation, but it reports in dmesg that it does not recognize the sensor. Is there a utility I can run and report the results back to this list that would help get this situation corrected?

Hello Curt,

I don't know which driver you used. If it is the sn9c102, please, regenerate, removing this driver from the config.

Also, as this webcam has not be tested yet, I'd be glad to know if it works. If it does not, may you send me the last kernel messages after pluging the webcam (do a grep on 'gspca' and 'sonixj'), and the image.dat generated by my program svv (if any - do 'svv -rg').

Regards.

Signature · 7 lines
Ken ar c'hentan	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#5 lore raw

OK, after adding the following symbolic link in /usr/lib I was able to compile svv.c:
ln -s libv4lconvert.so.0 libv4lconvert.so

dmesg output:

[ 9802.740030] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 9802.907910] usb 3-2: configuration #1 chosen from 1 choice
[ 9803.551890] Linux video capture interface: v2.00
[ 9803.664328] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
[ 9803.674162] usb 3-2: SN9C105 PC Camera Controller detected (vid:pid 0x0471:0x0327)
[ 9803.841084] usb 3-2: No supported image sensor detected for this bridge
[ 9803.842270] usbcore: registered new interface driver snd-usb-audio
[ 9803.847120] usbcore: registered new interface driver sn9c102

svv -rg output:

Cannot identify '/dev/video0': 2, No such file or directory

I am using the AMD64 version of Ubuntu 8.10.

lsusb output:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0471:0327 Philips WebCam SPC 6000 NC (WebCam w/ mic) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 008: ID 046d:c225 Logitech, Inc.
Bus 001 Device 007: ID 046d:c221 Logitech, Inc. G15 Keyboard / Keyboard Bus 001 Device 006: ID 04f3:0212 Elan Microelectronics Corp. Bus 001 Device 005: ID 046d:c223 Logitech, Inc. G15 Keyboard / USB Hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Please provide me with more information on how I should disable the sn9c102 driver.

Thank you for your help,

Curt

________________________________
From: Jean-Francois Moine <[email protected]>
To: Curtis Schroeder <[email protected]>
Cc: [email protected]
Sent: Saturday, February 7, 2009 3:07:03 AM
Subject: Re: Philips SPC 600 NCP

Quoted 8 lines · On Fri, 6 Feb 2009 16:47:49 -0800 (PST) Curtis Schroeder…

I recently picked up a Philips SPC 600 NC web cam on clearance, because I had read in the Ekiga documentation that most Philips web cams were compatible. Evidently the SPC 600 NC currently is not compatible with Linux. I've downloaded and installed gspca-4d0827823ebc in my 64-bit Ubuntu 8.10 installation, but it reports in dmesg that it does not recognize the sensor. Is there a utility I can run and report the results back to this list that would help get this situation corrected?

Hello Curt,

I don't know which driver you used. If it is the sn9c102, please, regenerate, removing this driver from the config.

Also, as this webcam has not be tested yet, I'd be glad to know if it works. If it does not, may you send me the last kernel messages after pluging the webcam (do a grep on 'gspca' and 'sonixj'), and the image.dat generated by my program svv (if any - do 'svv -rg').

Regards.

Signature · 10 lines
Ken ar c'hentan    |          ** Breizh ha Linux atav! **
Jef        |        http://moinejf.free.fr/



      
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list