Additional VGA options for MIPS Malta
PATCH 1/1 Additional VGA options for MIPS Malta
Hi,
any of the VGA PCI cards supported by Qemu can be used not only by PC guests but also by MIPS Malta guests.
This patch adds the missing code and updates the documentation. It also allows to run Malta without any VGA card.
Regards
Stefan
support all kinds of pci vga cards (including none)
hw/mips_malta.c +9 -1
@@ -941,8 +941,16 @@network_init (pci_bus);/* Optional PCI video card */ -pci_cirrus_vga_init (pci_bus, phys_ram_base + ram_size, +if (cirrus_vga_enabled) { +pci_cirrus_vga_init (pci_bus, phys_ram_base + ram_size, + ram_size, vga_ram_size); + }else if (vmsvga_enabled) { +pci_vmsvga_init (pci_bus, phys_ram_base + ram_size, ram_size, vga_ram_size); + }else if (std_vga_enabled) { +pci_vga_init (pci_bus, phys_ram_base + ram_size, + ram_size, vga_ram_size,0 ,0 ); + } }QEMUMachine mips_malta_machine = {
qemu-doc.texi +1 -1
@@ -2700,7 +2700,7 @@ @item Malta FPGA serial device @item -Cirrus VGA graphics card +Cirrus (default) or any other PCI VGA graphics card @end itemize The ACER Pica emulation supports:
Quoted 10 lines · Stefan Weil
Hi,
any of the VGA PCI cards supported by Qemu can be used not only by PC guests but also by MIPS Malta guests.
This patch adds the missing code and updates the documentation. It also allows to run Malta without any VGA card.
Regards
Stefan
Sorry, the patch for Makefile.target was missing.
Here is an update of the complete patch.
Please apply it to Qemu trunk.
Regards,
Stefan
support all kinds of pci vga cards (including none)
hw/mips_malta.c +9 -1
@@ -941,8 +941,16 @@network_init (pci_bus);/* Optional PCI video card */ -pci_cirrus_vga_init (pci_bus, phys_ram_base + ram_size, +if (cirrus_vga_enabled) { +pci_cirrus_vga_init (pci_bus, phys_ram_base + ram_size, + ram_size, vga_ram_size); + }else if (vmsvga_enabled) { +pci_vmsvga_init (pci_bus, phys_ram_base + ram_size, ram_size, vga_ram_size); + }else if (std_vga_enabled) { +pci_vga_init (pci_bus, phys_ram_base + ram_size, + ram_size, vga_ram_size,0 ,0 ); + } }QEMUMachine mips_malta_machine = {
qemu-doc.texi +1 -1
@@ -2700,7 +2700,7 @@ @item Malta FPGA serial device @item -Cirrus VGA graphics card +Cirrus (default) or any other PCI VGA graphics card @end itemize The ACER Pica emulation supports:
Makefile.target +1 -0
@@ -614,6 +614,7 @@ OBJS+= piix_pci.o parallel.o cirrus_vga.o pcspk.o $(SOUND_HW) OBJS+= mipsnet.o OBJS+= pflash_cfi01.o +OBJS+= vmware_vga.o CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE endif ifeq ($(TARGET_BASE_ARCH), cris)
Aurelien Jarno
AppliedQuoted 12 lines · Stefan Weil
Quoted 10 lines · Stefan Weil
Hi,
any of the VGA PCI cards supported by Qemu can be used not only by PC guests but also by MIPS Malta guests.
This patch adds the missing code and updates the documentation. It also allows to run Malta without any VGA card.
Regards
Stefan
Quoted 8 lines
Sorry, the patch for Makefile.target was missing.
Here is an update of the complete patch.Please apply it to Qemu trunk.
Regards,
Stefan
Thanks, applied.
Signature · 2 lines
Aurelien Jarno GPG: 1024D/F1BCDB73 [email protected] http://www.aurel32.net