Skip to contentSkip to conversation

82xx, mgcoge: fix compile error

PATCH New Heiko Schocher 2 participants 2 messages Feb 12, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 82xx, mgcoge: fix compile error

With actual u-boot compiling the mgcoge port fails, because since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is necessary to define CONFIG_NET_MULTI.

[hs at pollux u-boot]$ ./MAKEALL mgcoge
Configuring for mgcoge board...
ether_scc.c:47:2: error: #error "CONFIG_NET_MULTI must be defined." ether_scc.c:47:2: error: #error "CONFIG_NET_MULTI must be defined." make[1]: *** [ether_scc.o] Fehler 1
make: *** [cpu/mpc8260/libmpc8260.a] Fehler 2
make: *** Warte auf noch nicht beendete Prozesse...
ppc_82xx-size: './u-boot': No such file
[hs at pollux u-boot]$

Seems to me the mgcoge port is the only actual existing 8260 port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed to be fixed.

---
 include/configs/mgcoge.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
include/configs/mgcoge.h +1 -0
index 233bee0..b5d12c6 100644
@@ -64,6 +64,7 @@
 #define	CONFIG_ETHER_ON_SCC		/* Ethernet is on SCC */
 #undef	CONFIG_ETHER_ON_FCC		/* Ethernet is not on FCC     */
 #undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
+#define CONFIG_NET_MULTI	1
 
 #define CONFIG_ETHER_INDEX	4
 #define CONFIG_SYS_SCC_TOUT_LOOP	10000000
Signature · 5 lines
1.6.0.6

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

PATCH 1/1 82xx, mgcoge: fix compile error

Dear Heiko Schocher,

Quoted 14 lines · In message <[email protected]> you wrote:

With actual u-boot compiling the mgcoge port fails, because since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is necessary to define CONFIG_NET_MULTI.

[hs at pollux u-boot]$ ./MAKEALL mgcoge
Configuring for mgcoge board...
ether_scc.c:47:2: error: #error "CONFIG_NET_MULTI must be defined." ether_scc.c:47:2: error: #error "CONFIG_NET_MULTI must be defined." make[1]: *** [ether_scc.o] Fehler 1
make: *** [cpu/mpc8260/libmpc8260.a] Fehler 2
make: *** Warte auf noch nicht beendete Prozesse...
ppc_82xx-size: './u-boot': No such file
[hs at pollux u-boot]$

Quoted 8 lines

Seems to me the mgcoge port is the only actual existing 8260 port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed to be fixed.

---
 include/configs/mgcoge.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

Applied, thanks. [I shortened the commit message a bit.]

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
... bacteriological warfare ... hard to believe we were once foolish
enough to play around with that.
	-- McCoy, "The Omega Glory", stardate unknown