Skip to contentSkip to conversation

2.6.27.18-stable review

PATCH In review Greg KH 3 participants 50 messages Feb 14, 2009 – Feb 16, 2009

Subsystems (32)
lore
Share & tools
lore

Greg KH

author
#0 lore raw

cover 2.6.27.18-stable review

This is the start of the stable review cycle for the 2.6.27.18 release. There are 47 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.

These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.

Responses should be made by Tuesday Feb 17, 00:00:00@ UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.27.18-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

 Makefile                                       |    2 +-
 arch/powerpc/kernel/signal_32.c                |   36 +++++-------
 arch/powerpc/kernel/signal_64.c                |   33 +++++------
 arch/powerpc/mm/fsl_booke_mmu.c                |    4 +-
 arch/powerpc/mm/pgtable_32.c                   |    4 +-
 arch/sparc64/Kconfig                           |    1 +
 arch/sparc64/kernel/sys_sparc.c                |   48 ++++++++---------
 arch/sparc64/kernel/syscalls.S                 |    2 +-
 arch/sparc64/kernel/systbls.S                  |   16 +++---
 arch/sparc64/kernel/systbls.h                  |    3 -
 arch/x86/kernel/vmi_32.c                       |   11 ++++
 arch/x86/pci/fixup.c                           |   25 +++++----
 drivers/ata/libata-eh.c                        |    5 +-
 drivers/block/nbd.c                            |    9 +++
 drivers/hid/usbhid/hid-quirks.c                |   16 ++----
 drivers/net/skfp/skfddi.c                      |    4 +-
 drivers/net/sky2.c                             |    6 +-
 drivers/net/sungem.c                           |    8 ++--
 drivers/net/tun.c                              |   10 +++-
 drivers/net/virtio_net.c                       |    3 +-
 drivers/net/wireless/iwlwifi/iwl-scan.c        |    2 +-
 drivers/net/wireless/zd1211rw/zd_rf.c          |    1 +
 drivers/net/wireless/zd1211rw/zd_usb.c         |    1 +
 drivers/parport/parport_serial.c               |    5 ++
 drivers/w1/slaves/w1_therm.c                   |    2 +-
 fs/compat_ioctl.c                              |    7 +++
 fs/lockd/svclock.c                             |    6 ++-
 include/linux/ata.h                            |   15 ++++--
 include/linux/syscalls.h                       |   28 +++++-----
 include/net/sctp/checksum.h                    |    2 +-
 mm/page-writeback.c                            |   18 +++++-
 net/bluetooth/hidp/core.c                      |    4 ++
 net/core/skbuff.c                              |   15 +++---
 net/core/sock.c                                |    2 +
 net/ipv4/ipconfig.c                            |    6 +-
 net/ipv4/tcp.c                                 |   12 ++++-
 net/ipv4/udp.c                                 |    7 ++-
 net/ipv6/ip6_flowlabel.c                       |    8 ++-
 net/ipv6/ip6_output.c                          |   67 ++++++++++++++++++-----
 net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c |    4 +-
 net/mac80211/debugfs_sta.c                     |    2 +-
 net/netfilter/xt_sctp.c                        |    2 +-
 net/packet/af_packet.c                         |   17 ++++--
 net/sctp/output.c                              |    7 ++-
 net/sctp/outqueue.c                            |    3 +-
 scripts/kernel-doc                             |   39 +++++++++++++-
 sound/drivers/mtpav.c                          |    3 +-
 47 files changed, 339 insertions(+), 192 deletions(-)
author
#1 lore raw

PATCH 1/47 Fix page writeback thinko, causing Berkeley DB slowdown

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Nick Piggin <[email protected]>

commit 3a4c6800f31ea8395628af5e7e490270ee5d0585 upstream.

A bug was introduced into write_cache_pages cyclic writeout by commit 31a12666d8f0c22235297e1c1575f82061480029 ("mm: write_cache_pages cyclic fix"). The intention (and comments) is that we should cycle back and look for more dirty pages at the beginning of the file if there is no more work to be done.

But the !done condition was dropped from the test. This means that any time the page writeout loop breaks (eg. due to nr_to_write == 0), we will set index to 0, then goto again. This will set done_index to index, then find done is set, so will proceed to the end of the function. When updating mapping->writeback_index for cyclic writeout, we now use done_index == 0, so we're always cycling back to 0.

This seemed to be causing random mmap writes (slapadd and iozone) to start writing more pages from the LRU and writeout would slowdown, and caused bugzilla entry

	http://bugzilla.kernel.org/show_bug.cgi?id=12604

about Berkeley DB slowing down dramatically.

With this patch, iozone random write performance is increased nearly 5x on my system (iozone -B -r 4k -s 64k -s 512m -s 1200m on ext2).

---
 mm/page-writeback.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/page-writeback.c +1 -1
@@ -1001,7 +1001,7 @@ continue_unlock:
 		pagevec_release(&pvec);
 		cond_resched();
 	}
-	if (!cycled) {
+	if (!cycled && !done) {
 		/*
 		 * range_cyclic:
 		 * We hit the last page and there is more work to be done: wrap
author
#2 lore raw

PATCH 2/47 iwlwifi: scan correct setting of valid rx_chains

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Tomas Winkler <[email protected]>

commit d588be6bae40f7965f1b681a4dbc3254411787b9 upstream.

This patch sets rx_chain bitmap correctly according hw configuration.

---
 drivers/net/wireless/iwlwifi/iwl-scan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/iwlwifi/iwl-scan.c +1 -1
@@ -704,7 +704,7 @@ static void iwl_bg_request_scan(struct w
 	u16 cmd_len;
 	enum ieee80211_band band;
 	u8 n_probes = 2;
-	u8 rx_chain = 0x7; /* bitmap: ABC chains */
+	u8 rx_chain = priv->hw_params.valid_rx_ant;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
author
#3 lore raw

PATCH 3/47 kernel-doc: fix syscall wrapper processing

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Randy Dunlap <[email protected]>

commit b4870bc5ee8c7a37541a3eb1208b5c76c13a078a upstream.

Fix kernel-doc processing of SYSCALL wrappers.

The SYSCALL wrapper patches played havoc with kernel-doc for syscalls. Syscalls that were scanned for DocBook processing reported warnings like this one, for sys_tgkill:

Warning(kernel/signal.c:2285): No description found for parameter 'tgkill' Warning(kernel/signal.c:2285): No description found for parameter 'pid_t' Warning(kernel/signal.c:2285): No description found for parameter 'int'

because the macro parameters all "look like" function parameters, although they are not:

/**

 *  sys_tgkill - send signal to one specific thread
 *  @tgid: the thread group ID of the thread
 *  @pid: the PID of the thread
 *  @sig: signal to be sent
 *
 *  This syscall also checks the @tgid and returns -ESRCH even if the PID
 *  exists but it's not belonging to the target process anymore. This
 *  method solves the problem of threads exiting and PIDs getting reused.

*/
SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig) {
...

This patch special-cases the handling SYSCALL_DEFINE* function prototypes by expanding them to

	long sys_foobar(type1 arg1, type1 arg2, ...)
---
 scripts/kernel-doc |   39 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)
scripts/kernel-doc +38 -1
@@ -1758,6 +1758,40 @@ sub reset_state {
     $state = 0;
 }
 
+sub syscall_munge() {
+	my $void = 0;
+
+	$prototype =~ s@[\r\n\t]+@ @gos; # strip newlines/CR's/tabs
+##	if ($prototype =~ m/SYSCALL_DEFINE0\s*\(\s*(a-zA-Z0-9_)*\s*\)/) {
+	if ($prototype =~ m/SYSCALL_DEFINE0/) {
+		$void = 1;
+##		$prototype = "long sys_$1(void)";
+	}
+
+	$prototype =~ s/SYSCALL_DEFINE.*\(/long sys_/; # fix return type & func name
+	if ($prototype =~ m/long (sys_.*?),/) {
+		$prototype =~ s/,/\(/;
+	} elsif ($void) {
+		$prototype =~ s/\)/\(void\)/;
+	}
+
+	# now delete all of the odd-number commas in $prototype
+	# so that arg types & arg names don't have a comma between them
+	my $count = 0;
+	my $len = length($prototype);
+	if ($void) {
+		$len = 0;	# skip the for-loop
+	}
+	for (my $ix = 0; $ix < $len; $ix++) {
+		if (substr($prototype, $ix, 1) eq ',') {
+			$count++;
+			if ($count % 2 == 1) {
+				substr($prototype, $ix, 1) = ' ';
+			}
+		}
+	}
+}
+
 sub process_state3_function($$) {
     my $x = shift;
     my $file = shift;
@@ -1774,7 +1808,10 @@ sub process_state3_function($$) {
 	$prototype =~ s@/\*.*?\*/@@gos;	# strip comments.
 	$prototype =~ s@[\r\n]+@ @gos; # strip newlines/cr's.
 	$prototype =~ s@^\s+@@gos; # strip leading spaces
-	dump_function($prototype,$file);
+	if ($prototype =~ /SYSCALL_DEFINE/) {
+		syscall_munge();
+	}
+	dump_function($prototype, $file);
 	reset_state();
     }
 }
author
#4 lore raw

PATCH 4/47 lockd: fix regression in lockds handling of blocked locks

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: J. Bruce Fields <[email protected]>

commit 9d9b87c1218be78ddecbc85ec3bb91c79c1d56ab upstream.

If a client requests a blocking lock, is denied, then requests it again, then here in nlmsvc_lock() we will call vfs_lock_file() without FL_SLEEP set, because we've already queued a block and don't need the locks code to do it again.

But that means vfs_lock_file() will return -EAGAIN instead of FILE_LOCK_DENIED. So we still need to translate that -EAGAIN return into a nlm_lck_blocked error in this case, and put ourselves back on lockd's block list.

The bug was introduced by bde74e4bc64415b1 "locks: add special return value for asynchronous locks".

Thanks to Frank van Maarseveen for the report; his original test case was essentially

for i in seq 30; do flock /nfsmount/foo sleep 10 & done

---
 fs/lockd/svclock.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/lockd/svclock.c +5 -1
@@ -418,7 +418,7 @@ nlmsvc_lock(struct svc_rqst *rqstp, stru
 			goto out;
 		case -EAGAIN:
 			ret = nlm_lck_denied;
-			goto out;
+			break;
 		case FILE_LOCK_DEFERRED:
 			if (wait)
 				break;
@@ -434,6 +434,10 @@ nlmsvc_lock(struct svc_rqst *rqstp, stru
 			goto out;
 	}
 
+	ret = nlm_lck_denied;
+	if (!wait)
+		goto out;
+
 	ret = nlm_lck_blocked;
 
 	/* Append to list of blocked */
author
#5 lore raw

PATCH 5/47 nbd: fix I/O hang on disconnected nbds

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Paul Clements <[email protected]>

commit 4d48a542b42747c36a5937447d9c3de7c897ea50 upstream.

Fix a problem that causes I/O to a disconnected (or partially initialized) nbd device to hang indefinitely. To reproduce:

# ioctl NBD_SET_SIZE_BLOCKS /dev/nbd23 514048
# dd if=/dev/nbd23 of=/dev/null bs=4096 count=1

...hangs...

This can also occur when an nbd device loses its nbd-client/server connection. Although we clear the queue of any outstanding I/Os after the client/server connection fails, any additional I/Os that get queued later will hang.

This bug may also be the problem reported in this bug report:
http://bugzilla.kernel.org/show_bug.cgi?id=12277

Testing would need to be performed to determine if the two issues are the same.

This problem was introduced by the new request handling thread code ("NBD:
allow nbd to be used locally", 3/2008), which entered into mainline around 2.6.25.

The fix, which is fairly simple, is to restore the check for lo->sock being NULL in do_nbd_request. This causes I/O to an uninitialized nbd to immediately fail with an I/O error, as it did prior to the introduction of this bug.

---
 drivers/block/nbd.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/block/nbd.c +9 -0
@@ -547,6 +547,15 @@ static void do_nbd_request(struct reques
 
 		BUG_ON(lo->magic != LO_MAGIC);
 
+		if (unlikely(!lo->sock)) {
+			printk(KERN_ERR "%s: Attempted send on closed socket\n",
+				lo->disk->disk_name);
+			req->errors++;
+			nbd_end_request(req);
+			spin_lock_irq(q->queue_lock);
+			continue;
+		}
+
 		spin_lock_irq(&lo->queue_lock);
 		list_add_tail(&req->queuelist, &lo->waiting_queue);
 		spin_unlock_irq(&lo->queue_lock);
author
#6 lore raw

PATCH 6/47 parport: parport_serial, dont bind netmos ibm 0299

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Jiri Slaby <[email protected]>

commit 3abdbf90a3ffb006108c831c56b092e35483b6ec upstream.

Since netmos 9835 with subids 0x1014(IBM):0x0299 is now bound with serial/8250_pci, because it has no parallel ports and subdevice id isn't in the expected form, return -ENODEV from probe function.

This is performed in netmos preinit_hook.

---
 drivers/parport/parport_serial.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/parport/parport_serial.c +5 -0
@@ -64,6 +64,11 @@ struct parport_pc_pci {
 
 static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma)
 {
+	/* the rule described below doesn't hold for this device */
+	if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
+			dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+			dev->subsystem_device == 0x0299)
+		return -ENODEV;
 	/*
 	 * Netmos uses the subdevice ID to indicate the number of parallel
 	 * and serial ports.  The form is 0x00PS, where <P> is the number of
author
#7 lore raw

PATCH 7/47 powerpc: Fix swapcontext system for VSX + old ucontext size

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Michael Neuling <[email protected]>

commit 16c29d180becc5bdf92fd0fc7314a44a671b5f4e upstream.

Since VSX support was added, we now have two sizes of ucontext_t; the older, smaller size without the extra VSX state, and the new larger size with the extra VSX state. A program using the sys_swapcontext system call and supplying smaller ucontext_t structures will currently get an EINVAL error if the task has used VSX (e.g. because of calling library code that uses VSX) and the old_ctx argument is non-NULL (i.e. the program is asking for its current context to be saved). Thus the program will start getting EINVAL errors on calls that previously worked.

This commit changes this behaviour so that we don't send an EINVAL in this case. It will now return the smaller context but the VSX MSR bit will always be cleared to indicate that the ucontext_t doesn't include the extra VSX state, even if the task has executed VSX instructions.

Both 32 and 64 bit cases are updated.

[[email protected] - also fix some access_ok() and get_user() calls]

Thanks to Ben Herrenschmidt for noticing this problem.

---
 arch/powerpc/kernel/signal_32.c |   36 +++++++++++++++---------------------
 arch/powerpc/kernel/signal_64.c |   33 +++++++++++++++------------------
 2 files changed, 30 insertions(+), 39 deletions(-)
arch/powerpc/kernel/signal_32.c +15 -21
@@ -410,7 +410,7 @@ inline unsigned long copy_fpr_from_user(
  * altivec/spe instructions at some point.
  */
 static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
-		int sigret)
+		int sigret, int ctx_has_vsx_region)
 {
 	unsigned long msr = regs->msr;
 
@@ -451,7 +451,7 @@ static int save_user_regs(struct pt_regs
 	 * the saved MSR value to indicate that frame->mc_vregs
 	 * contains valid data
 	 */
-	if (current->thread.used_vsr) {
+	if (current->thread.used_vsr && ctx_has_vsx_region) {
 		__giveup_vsx(current);
 		if (copy_vsx_to_user(&frame->mc_vsregs, current))
 			return 1;
@@ -858,11 +858,11 @@ int handle_rt_signal32(unsigned long sig
 	frame = &rt_sf->uc.uc_mcontext;
 	addr = frame;
 	if (vdso32_rt_sigtramp && current->mm->context.vdso_base) {
-		if (save_user_regs(regs, frame, 0))
+		if (save_user_regs(regs, frame, 0, 1))
 			goto badframe;
 		regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp;
 	} else {
-		if (save_user_regs(regs, frame, __NR_rt_sigreturn))
+		if (save_user_regs(regs, frame, __NR_rt_sigreturn, 1))
 			goto badframe;
 		regs->link = (unsigned long) frame->tramp;
 	}
@@ -936,12 +936,13 @@ long sys_swapcontext(struct ucontext __u
 		     int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
 {
 	unsigned char tmp;
+	int ctx_has_vsx_region = 0;
 
 #ifdef CONFIG_PPC64
 	unsigned long new_msr = 0;
 
 	if (new_ctx &&
-	    __get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
+	    get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
 		return -EFAULT;
 	/*
 	 * Check that the context is not smaller than the original
@@ -956,16 +957,9 @@ long sys_swapcontext(struct ucontext __u
 	if ((ctx_size < sizeof(struct ucontext)) &&
 	    (new_msr & MSR_VSX))
 		return -EINVAL;
-#ifdef CONFIG_VSX
-	/*
-	 * If userspace doesn't provide enough room for VSX data,
-	 * but current thread has used VSX, we don't have anywhere
-	 * to store the full context back into.
-	 */
-	if ((ctx_size < sizeof(struct ucontext)) &&
-	    (current->thread.used_vsr && old_ctx))
-		return -EINVAL;
-#endif
+	/* Does the context have enough room to store VSX data? */
+	if (ctx_size >= sizeof(struct ucontext))
+		ctx_has_vsx_region = 1;
 #else
 	/* Context size is for future use. Right now, we only make sure
 	 * we are passed something we understand
@@ -985,17 +979,17 @@ long sys_swapcontext(struct ucontext __u
 		 */
 		mctx = (struct mcontext __user *)
 			((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
-		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
-		    || save_user_regs(regs, mctx, 0)
+		if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
+		    || save_user_regs(regs, mctx, 0, ctx_has_vsx_region)
 		    || put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
 		    || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
 			return -EFAULT;
 	}
 	if (new_ctx == NULL)
 		return 0;
-	if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
+	if (!access_ok(VERIFY_READ, new_ctx, ctx_size)
 	    || __get_user(tmp, (u8 __user *) new_ctx)
-	    || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
+	    || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1))
 		return -EFAULT;
 
 	/*
@@ -1196,11 +1190,11 @@ int handle_signal32(unsigned long sig, s
 		goto badframe;
 
 	if (vdso32_sigtramp && current->mm->context.vdso_base) {
-		if (save_user_regs(regs, &frame->mctx, 0))
+		if (save_user_regs(regs, &frame->mctx, 0, 1))
 			goto badframe;
 		regs->link = current->mm->context.vdso_base + vdso32_sigtramp;
 	} else {
-		if (save_user_regs(regs, &frame->mctx, __NR_sigreturn))
+		if (save_user_regs(regs, &frame->mctx, __NR_sigreturn, 1))
 			goto badframe;
 		regs->link = (unsigned long) frame->mctx.tramp;
 	}
arch/powerpc/kernel/signal_64.c +15 -18
@@ -74,7 +74,8 @@ static const char fmt64[] = KERN_INFO \
  */
 
 static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
-		 int signr, sigset_t *set, unsigned long handler)
+		 int signr, sigset_t *set, unsigned long handler,
+		 int ctx_has_vsx_region)
 {
 	/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
 	 * process never used altivec yet (MSR_VEC is zero in pt_regs of
@@ -121,7 +122,7 @@ static long setup_sigcontext(struct sigc
 	 * then out to userspace.  Update v_regs to point after the
 	 * VMX data.
 	 */
-	if (current->thread.used_vsr) {
+	if (current->thread.used_vsr && ctx_has_vsx_region) {
 		__giveup_vsx(current);
 		v_regs += ELF_NVRREG;
 		err |= copy_vsx_to_user(v_regs, current);
@@ -284,9 +285,10 @@ int sys_swapcontext(struct ucontext __us
 	unsigned char tmp;
 	sigset_t set;
 	unsigned long new_msr = 0;
+	int ctx_has_vsx_region = 0;
 
 	if (new_ctx &&
-	    __get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
+	    get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
 		return -EFAULT;
 	/*
 	 * Check that the context is not smaller than the original
@@ -301,28 +303,23 @@ int sys_swapcontext(struct ucontext __us
 	if ((ctx_size < sizeof(struct ucontext)) &&
 	    (new_msr & MSR_VSX))
 		return -EINVAL;
-#ifdef CONFIG_VSX
-	/*
-	 * If userspace doesn't provide enough room for VSX data,
-	 * but current thread has used VSX, we don't have anywhere
-	 * to store the full context back into.
-	 */
-	if ((ctx_size < sizeof(struct ucontext)) &&
-	    (current->thread.used_vsr && old_ctx))
-		return -EINVAL;
-#endif
+	/* Does the context have enough room to store VSX data? */
+	if (ctx_size >= sizeof(struct ucontext))
+		ctx_has_vsx_region = 1;
+
 	if (old_ctx != NULL) {
-		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
-		    || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0)
+		if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
+		    || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0,
+					ctx_has_vsx_region)
 		    || __copy_to_user(&old_ctx->uc_sigmask,
 				      &current->blocked, sizeof(sigset_t)))
 			return -EFAULT;
 	}
 	if (new_ctx == NULL)
 		return 0;
-	if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
+	if (!access_ok(VERIFY_READ, new_ctx, ctx_size)
 	    || __get_user(tmp, (u8 __user *) new_ctx)
-	    || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
+	    || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1))
 		return -EFAULT;
 
 	/*
@@ -425,7 +422,7 @@ int handle_rt_signal64(int signr, struct
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
 	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL,
-				(unsigned long)ka->sa.sa_handler);
+				(unsigned long)ka->sa.sa_handler, 1);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
 		goto badframe;
author
#8 lore raw

PATCH 8/47 powerpc/fsl-booke: Fix mapping functions to use phys_addr_t

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Kumar Gala <[email protected]>

commit 6c24b17453c8dc444a746e45b8a404498fc9fcf7 upstream.

Fixed v_mapped_by_tlbcam() and p_mapped_by_tlbcam() to use phys_addr_t instead of unsigned long. In 36-bit physical mode we really need these functions to deal with phys_addr_t when trying to match a physical address or when returning one.

---
 arch/powerpc/mm/fsl_booke_mmu.c |    4 ++--
 arch/powerpc/mm/pgtable_32.c    |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/mm/fsl_booke_mmu.c +2 -2
@@ -80,7 +80,7 @@ extern unsigned int tlbcam_index;
 /*
  * Return PA for this VA if it is mapped by a CAM, or 0
  */
-unsigned long v_mapped_by_tlbcam(unsigned long va)
+phys_addr_t v_mapped_by_tlbcam(unsigned long va)
 {
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
@@ -92,7 +92,7 @@ unsigned long v_mapped_by_tlbcam(unsigne
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_tlbcam(unsigned long pa)
+unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
arch/powerpc/mm/pgtable_32.c +2 -2
@@ -65,8 +65,8 @@ void setbat(int index, unsigned long vir
 
 #ifdef HAVE_TLBCAM
 extern unsigned int tlbcam_index;
-extern unsigned long v_mapped_by_tlbcam(unsigned long va);
-extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
+extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
+extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
 #else /* !HAVE_TLBCAM */
 #define v_mapped_by_tlbcam(x)	(0UL)
 #define p_mapped_by_tlbcam(x)	(0UL)
author
#9 lore raw

PATCH 9/47 syscall define: fix uml compile bug

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Heiko Carstens <[email protected]>

commit 6c5979631b4b03c9288776562c18036765e398c1 upstream.

With the new system call defines we get this on uml:

arch/um/sys-i386/built-in.o: In function `sys_call_table':
(.rodata+0x308): undefined reference to `sys_sigprocmask'

Reason for this is that uml passes the preprocessor option -Dsigprocmask=kernel_sigprocmask to gcc when compiling the kernel. This causes SYSCALL_DEFINE3(sigprocmask, ...) to be expanded to SYSCALL_DEFINEx(3, kernel_sigprocmask, ...) and finally to a system call named sys_kernel_sigprocmask. However sys_sigprocmask is missing because of this.

To avoid macro expansion for the system call name just concatenate the name at first define instead of carrying it through severel levels. This was pointed out by Al Viro.

---
 include/linux/syscalls.h |   28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
include/linux/syscalls.h +14 -14
@@ -95,13 +95,13 @@ struct old_linux_dirent;
 #define __SC_TEST5(t5, a5, ...)	__SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
 #define __SC_TEST6(t6, a6, ...)	__SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
 
-#define SYSCALL_DEFINE0(name)   asmlinkage long sys_##name(void)
-#define SYSCALL_DEFINE1(...)    SYSCALL_DEFINEx(1, __VA_ARGS__)
-#define SYSCALL_DEFINE2(...)    SYSCALL_DEFINEx(2, __VA_ARGS__)
-#define SYSCALL_DEFINE3(...)    SYSCALL_DEFINEx(3, __VA_ARGS__)
-#define SYSCALL_DEFINE4(...)    SYSCALL_DEFINEx(4, __VA_ARGS__)
-#define SYSCALL_DEFINE5(...)    SYSCALL_DEFINEx(5, __VA_ARGS__)
-#define SYSCALL_DEFINE6(...)    SYSCALL_DEFINEx(6, __VA_ARGS__)
+#define SYSCALL_DEFINE0(name)	   asmlinkage long sys_##name(void)
+#define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
 
 #ifdef CONFIG_PPC64
 #define SYSCALL_ALIAS(alias, name)					\
@@ -116,21 +116,21 @@ struct old_linux_dirent;
 
 #define SYSCALL_DEFINE(name) static inline long SYSC_##name
 #define SYSCALL_DEFINEx(x, name, ...)					\
-	asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__));		\
-	static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__));	\
-	asmlinkage long SyS_##name(__SC_LONG##x(__VA_ARGS__))		\
+	asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__));		\
+	static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__));	\
+	asmlinkage long SyS##name(__SC_LONG##x(__VA_ARGS__))		\
 	{								\
 		__SC_TEST##x(__VA_ARGS__);				\
-		return (long) SYSC_##name(__SC_CAST##x(__VA_ARGS__));	\
+		return (long) SYSC##name(__SC_CAST##x(__VA_ARGS__));	\
 	}								\
-	SYSCALL_ALIAS(sys_##name, SyS_##name);				\
-	static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__))
+	SYSCALL_ALIAS(sys##name, SyS##name);				\
+	static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__))
 
 #else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
 
 #define SYSCALL_DEFINE(name) asmlinkage long sys_##name
 #define SYSCALL_DEFINEx(x, name, ...)					\
-	asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__))
+	asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__))
 
 #endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
 
author
#10 lore raw

PATCH 10/47 w1: w1 temp calculation overflow fix

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Ian Dall <[email protected]>

commit 507e2fbaaacb6f164b4125b87c5002f95143174b upstream.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12646

When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are bothe well within the -55 - +125 degree range for the sensor.

Fix overflow in left-shift of a u8.

---
 drivers/w1/slaves/w1_therm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/w1/slaves/w1_therm.c +1 -1
@@ -113,7 +113,7 @@ static struct w1_therm_family_converter 
 
 static inline int w1_DS18B20_convert_temp(u8 rom[9])
 {
-	s16 t = (rom[1] << 8) | rom[0];
+	int t = ((s16)rom[1] << 8) | rom[0];
 	t = t*1000/16;
 	return t;
 }
author
#11 lore raw

PATCH 11/47 write-back: fix nr_to_write counter

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Artem Bityutskiy <[email protected]>

commit dcf6a79dda5cc2a2bec183e50d829030c0972aaa upstream.

Commit 05fe478dd04e02fa230c305ab9b5616669821dd3 introduced some @wbc->nr_to_write breakage.

It made the following changes:
1. Decrement wbc->nr_to_write instead of nr_to_write
2. Decrement wbc->nr_to_write _only_ if wbc->sync_mode == WB_SYNC_NONE
3. If synced nr_to_write pages, stop only if if wbc->sync_mode == WB_SYNC_NONE, otherwise keep going.

However, according to the commit message, the intention was to only make change 3. Change 1 is a bug. Change 2 does not seem to be necessary, and it breaks UBIFS expectations, so if needed, it should be done separately later. And change 2 does not seem to be documented in the commit message.

This patch does the following:
1. Undo changes 1 and 2
2. Add a comment explaining change 3 (it very useful to have comments in _code_, not only in the commit).

---
 mm/page-writeback.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
mm/page-writeback.c +14 -5
@@ -985,13 +985,22 @@ continue_unlock:
 				}
  			}
 
-			if (wbc->sync_mode == WB_SYNC_NONE) {
+			if (wbc->nr_to_write > 0)
 				wbc->nr_to_write--;
-				if (wbc->nr_to_write <= 0) {
-					done = 1;
-					break;
-				}
+			else if (wbc->sync_mode == WB_SYNC_NONE) {
+				/*
+				 * We stop writing back only if we are not
+				 * doing integrity sync. In case of integrity
+				 * sync we have to keep going because someone
+				 * may be concurrently dirtying pages, and we
+				 * might have synced a lot of newly appeared
+				 * dirty pages, but have not synced all of the
+				 * old dirty pages.
+				 */
+				done = 1;
+				break;
 			}
+
 			if (wbc->nonblocking && bdi_write_congested(bdi)) {
 				wbc->encountered_congestion = 1;
 				done = 1;
author
#12 lore raw

PATCH 12/47 writeback: fix break condition

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Federico Cuello <[email protected]>

commit 89e1219004b3657cc014521663eeef0744f1c99d upstream.

Commit dcf6a79dda5cc2a2bec183e50d829030c0972aaa ("write-back: fix nr_to_write counter") fixed nr_to_write counter, but didn't set the break condition properly.

If nr_to_write == 0 after being decremented it will loop one more time before setting done = 1 and breaking the loop.

---
 mm/page-writeback.c |   29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)
mm/page-writeback.c +16 -13
@@ -985,20 +985,23 @@ continue_unlock:
 				}
  			}
 
-			if (wbc->nr_to_write > 0)
+			if (wbc->nr_to_write > 0) {
 				wbc->nr_to_write--;
-			else if (wbc->sync_mode == WB_SYNC_NONE) {
-				/*
-				 * We stop writing back only if we are not
-				 * doing integrity sync. In case of integrity
-				 * sync we have to keep going because someone
-				 * may be concurrently dirtying pages, and we
-				 * might have synced a lot of newly appeared
-				 * dirty pages, but have not synced all of the
-				 * old dirty pages.
-				 */
-				done = 1;
-				break;
+				if (wbc->nr_to_write == 0 &&
+				    wbc->sync_mode == WB_SYNC_NONE) {
+					/*
+					 * We stop writing back only if we are
+					 * not doing integrity sync. In case of
+					 * integrity sync we have to keep going
+					 * because someone may be concurrently
+					 * dirtying pages, and we might have
+					 * synced a lot of newly appeared dirty
+					 * pages, but have not synced all of the
+					 * old dirty pages.
+					 */
+					done = 1;
+					break;
+				}
 			}
 
 			if (wbc->nonblocking && bdi_write_congested(bdi)) {
author
#13 lore raw

PATCH 13/47 x86, vmi: put a missing paravirt_release_pmd in pgd_dtor

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Alok Kataria <[email protected]>

commit 55a8ba4b7f76bebd7e8ce3f74c04b140627a1bad upstream.

Commit 6194ba6ff6ccf8d5c54c857600843c67aa82c407 ("x86: don't special-case pmd allocations as much") made changes to the way we handle pmd allocations, and while doing that it dropped a call to paravirt_release_pd on the pgd page from the pgd_dtor code path.

As a result of this missing release, the hypervisor is now unaware of the pgd page being freed, and as a result it ends up tracking this page as a page table page.

After this the guest may start using the same page for other purposes, and depending on what use the page is put to, it may result in various performance and/or functional issues ( hangs, reboots).

Since this release is only required for VMI, I now release the pgd page from the (vmi)_pgd_free hook.

---
 arch/x86/kernel/vmi_32.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
arch/x86/kernel/vmi_32.c +11 -0
@@ -430,6 +430,16 @@ static void vmi_release_pmd(u32 pfn)
 }
 
 /*
+ * We use the pgd_free hook for releasing the pgd page:
+ */
+static void vmi_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	unsigned long pfn = __pa(pgd) >> PAGE_SHIFT;
+
+	vmi_ops.release_page(pfn, VMI_PAGE_L2);
+}
+
+/*
  * Helper macros for MMU update flags.  We can defer updates until a flush
  * or page invalidation only if the update is to the current address space
  * (otherwise, there is no flush).  We must check against init_mm, since
@@ -881,6 +891,7 @@ static inline int __init activate_vmi(vo
 	if (vmi_ops.release_page) {
 		pv_mmu_ops.release_pte = vmi_release_pte;
 		pv_mmu_ops.release_pmd = vmi_release_pmd;
+		pv_mmu_ops.pgd_free = vmi_pgd_free;
 	}
 
 	/* Set linear is needed in all cases */
author
#14 lore raw

PATCH 14/47 zd1211rw: adding 0ace:0xa211 as a ZD1211 device

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Hin-Tak Leung <[email protected]>

commit 14990c69b5f51dd57b4e0e2373de50239ac861e2 upstream.

Christoph Biedl <[email protected]> reported success in the sourceforge zd1211 mailing list on this addition. This product ID was supported by the vendor driver ZD1211LnxDrv 2.22.0.0 (and possibly earlier) and it probably should have been added earlier.

---
 drivers/net/wireless/zd1211rw/zd_usb.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/zd1211rw/zd_usb.c +1 -0
@@ -37,6 +37,7 @@
 static struct usb_device_id usb_ids[] = {
 	/* ZD1211 */
 	{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
+	{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
author
#15 lore raw

PATCH 15/47 zd1211rw: treat MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for TP-Link WN322/422G

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Hin-Tak Leung <[email protected]>

commit efb43f4b2ccf8066abc3920a0e6858e4350a65c7 upstream.

Three people (Petr Mensik <[email protected]>
["si" should be U+0161 U+00ED], Stephen Ho <[email protected]> on zd1211-devs and Ismael Ojeda Perez <[email protected]> on linux-wireless) reported success in getting TP-Link WN322G/WN422G working by treating MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for rf chip hardware initialization.

---
 drivers/net/wireless/zd1211rw/zd_rf.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/zd1211rw/zd_rf.c +1 -0
@@ -86,6 +86,7 @@ int zd_rf_init_hw(struct zd_rf *rf, u8 t
 	case AL7230B_RF:
 		r = zd_rf_init_al7230b(rf);
 		break;
+	case MAXIM_NEW_RF:
 	case UW2453_RF:
 		r = zd_rf_init_uw2453(rf);
 		break;
author
#16 lore raw

PATCH 16/47 sctp: Fix crc32c calculations on big-endian arhes.

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Vlad Yasevich <[email protected]>

[ Upstream commit 9c5ff5f75d0d0a1c7928ecfae3f38418b51a88e3 ]

crc32c algorithm provides a byteswaped result. On little-endian arches, the result ends up in big-endian/network byte order. On big-endinan arches, the result ends up in little-endian order and needs to be byte swapped again. Thus calling cpu_to_le32 gives the right output.

---
 include/net/sctp/checksum.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/net/sctp/checksum.h +1 -1
@@ -79,5 +79,5 @@ static inline __be32 sctp_update_cksum(_
 
 static inline __be32 sctp_end_cksum(__be32 crc32)
 {
-	return ~crc32;
+	return (__force __be32)~cpu_to_le32((__force u32)crc32);
 }
author
#17 lore raw

PATCH 17/47 sctp: Correctly start rtx timer on new packet transmissions.

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Vlad Yasevich <[email protected]>

[ Upstream commit 6574df9a89f9f7da3a4e5cee7633d430319d3350 ]

Commit 62aeaff5ccd96462b7077046357a6d7886175a57 (sctp: Start T3-RTX timer when fast retransmitting lowest TSN) introduced a regression where it was possible to forcibly restart the sctp retransmit timer at the transmission of any new chunk. This resulted in much longer timeout times and sometimes hung sctp connections.

---
 net/sctp/outqueue.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
net/sctp/outqueue.c +1 -2
@@ -929,7 +929,6 @@ static int sctp_outq_flush(struct sctp_o
 		}
 
 		/* Finally, transmit new packets.  */
-		start_timer = 0;
 		while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
 			/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
 			 * stream identifier.
@@ -1028,7 +1027,7 @@ static int sctp_outq_flush(struct sctp_o
 			list_add_tail(&chunk->transmitted_list,
 				      &transport->transmitted);
 
-			sctp_transport_reset_timers(transport, start_timer-1);
+			sctp_transport_reset_timers(transport, 0);
 
 			q->empty = 0;
 
author
#18 lore raw

PATCH 18/47 sctp: Properly timestamp outgoing data chunks for rtx purposes

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Vlad Yasevich <[email protected]>

[ Upstream commit 759af00ebef858015eb68876ac1f383bcb6a1774 ]

Recent changes to the retransmit code exposed a long standing bug where it was possible for a chunk to be time stamped after the retransmit timer was reset. This caused a rare situation where the retrnamist timer has expired, but nothing was marked for retrnasmission because all of timesamps on data were less then 1 rto ago. As result, the timer was never restarted since nothing was retransmitted, and this resulted in a hung association that did couldn't complete the data transfer. The solution is to timestamp the chunk when it's added to the packet for transmission purposes. After the packet is trsnmitted the rtx timer is restarted. This guarantees that when the timer expires, there will be data to retransmit.

---
 net/sctp/output.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/sctp/output.c +4 -3
@@ -324,14 +324,16 @@ append:
 	switch (chunk->chunk_hdr->type) {
 	    case SCTP_CID_DATA:
 		retval = sctp_packet_append_data(packet, chunk);
+		if (SCTP_XMIT_OK != retval)
+			goto finish;
 		/* Disallow SACK bundling after DATA. */
 		packet->has_sack = 1;
 		/* Disallow AUTH bundling after DATA */
 		packet->has_auth = 1;
 		/* Let it be knows that packet has DATA in it */
 		packet->has_data = 1;
-		if (SCTP_XMIT_OK != retval)
-			goto finish;
+		/* timestamp the chunk for rtx purposes */
+		chunk->sent_at = jiffies;
 		break;
 	    case SCTP_CID_COOKIE_ECHO:
 		packet->has_cookie_echo = 1;
@@ -470,7 +472,6 @@ int sctp_packet_transmit(struct sctp_pac
 			} else
 				chunk->resent = 1;
 
-			chunk->sent_at = jiffies;
 			has_data = 1;
 		}
 
author
#19 lore raw

PATCH 19/47 drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logic

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Roel Kluin <[email protected]>

[ Upstream commit c25b9abbc2c2c0da88e180c3933d6e773245815a ]

Fix inverted logic

---
 drivers/net/skfp/skfddi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/skfp/skfddi.c +2 -2
@@ -998,9 +998,9 @@ static int skfp_ioctl(struct net_device 
 		break;
 	case SKFP_CLR_STATS:	/* Zero out the driver statistics */
 		if (!capable(CAP_NET_ADMIN)) {
-			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
-		} else {
 			status = -EPERM;
+		} else {
+			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
 		}
 		break;
 	default:
author
#20 lore raw

PATCH 20/47 ipv4: fix infinite retry loop in IP-Config

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Benjamin Zores <[email protected]>

[ Upstream commit 9d8dba6c979fa99c96938c869611b9a23b73efa9 ]

---
 net/ipv4/ipconfig.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/ipv4/ipconfig.c +3 -3
@@ -1272,6 +1272,9 @@ __be32 __init root_nfs_parse_addr(char *
 static int __init ip_auto_config(void)
 {
 	__be32 addr;
+#ifdef IPCONFIG_DYNAMIC
+	int retries = CONF_OPEN_RETRIES;
+#endif
 
 #ifdef CONFIG_PROC_FS
 	proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
@@ -1308,9 +1311,6 @@ static int __init ip_auto_config(void)
 #endif
 	    ic_first_dev->next) {
 #ifdef IPCONFIG_DYNAMIC
-
-		int retries = CONF_OPEN_RETRIES;
-
 		if (ic_dynamic() < 0) {
 			ic_close_devs();
 
author
#21 lore raw

PATCH 21/47 ipv6: Disallow rediculious flowlabel option sizes.

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: David S. Miller <[email protected]>

[ Upstream commit 684de409acff8b1fe8bf188d75ff2f99c624387d ]

Just like PKTINFO, limit the options area to 64K.

Based upon report by Eric Sesterhenn and analysis by Roland Dreier.

---
 net/ipv6/ip6_flowlabel.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/ipv6/ip6_flowlabel.c +6 -2
@@ -323,17 +323,21 @@ static struct ip6_flowlabel *
 fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval,
 	  int optlen, int *err_p)
 {
-	struct ip6_flowlabel *fl;
+	struct ip6_flowlabel *fl = NULL;
 	int olen;
 	int addr_type;
 	int err;
 
+	olen = optlen - CMSG_ALIGN(sizeof(*freq));
+	err = -EINVAL;
+	if (olen > 64 * 1024)
+		goto done;
+
 	err = -ENOMEM;
 	fl = kzalloc(sizeof(*fl), GFP_KERNEL);
 	if (fl == NULL)
 		goto done;
 
-	olen = optlen - CMSG_ALIGN(sizeof(*freq));
 	if (olen > 0) {
 		struct msghdr msg;
 		struct flowi flowi;
author
#22 lore raw

PATCH 22/47 ipv6: Copy cork options in ip6_append_data

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Herbert Xu <[email protected]>

[ Upstream commit 0178b695fd6b40a62a215cbeb03dd51ada3bb5e0 ]

As the options passed to ip6_append_data may be ephemeral, we need to duplicate it for corking. This patch applies the simplest fix which is to memdup all the relevant bits.

---
 net/ipv6/ip6_output.c |   67 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 52 insertions(+), 15 deletions(-)
net/ipv6/ip6_output.c +52 -15
@@ -1091,6 +1091,18 @@ static inline int ip6_ufo_append_data(st
 	return err;
 }
 
+static inline struct ipv6_opt_hdr *ip6_opt_dup(struct ipv6_opt_hdr *src,
+					       gfp_t gfp)
+{
+	return src ? kmemdup(src, (src->hdrlen + 1) * 8, gfp) : NULL;
+}
+
+static inline struct ipv6_rt_hdr *ip6_rthdr_dup(struct ipv6_rt_hdr *src,
+						gfp_t gfp)
+{
+	return src ? kmemdup(src, (src->hdrlen + 1) * 8, gfp) : NULL;
+}
+
 int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 	int offset, int len, int odd, struct sk_buff *skb),
 	void *from, int length, int transhdrlen,
@@ -1116,17 +1128,37 @@ int ip6_append_data(struct sock *sk, int
 		 * setup for corking
 		 */
 		if (opt) {
-			if (np->cork.opt == NULL) {
-				np->cork.opt = kmalloc(opt->tot_len,
-						       sk->sk_allocation);
-				if (unlikely(np->cork.opt == NULL))
-					return -ENOBUFS;
-			} else if (np->cork.opt->tot_len < opt->tot_len) {
-				printk(KERN_DEBUG "ip6_append_data: invalid option length\n");
+			if (WARN_ON(np->cork.opt))
 				return -EINVAL;
-			}
-			memcpy(np->cork.opt, opt, opt->tot_len);
-			inet->cork.flags |= IPCORK_OPT;
+
+			np->cork.opt = kmalloc(opt->tot_len, sk->sk_allocation);
+			if (unlikely(np->cork.opt == NULL))
+				return -ENOBUFS;
+
+			np->cork.opt->tot_len = opt->tot_len;
+			np->cork.opt->opt_flen = opt->opt_flen;
+			np->cork.opt->opt_nflen = opt->opt_nflen;
+
+			np->cork.opt->dst0opt = ip6_opt_dup(opt->dst0opt,
+							    sk->sk_allocation);
+			if (opt->dst0opt && !np->cork.opt->dst0opt)
+				return -ENOBUFS;
+
+			np->cork.opt->dst1opt = ip6_opt_dup(opt->dst1opt,
+							    sk->sk_allocation);
+			if (opt->dst1opt && !np->cork.opt->dst1opt)
+				return -ENOBUFS;
+
+			np->cork.opt->hopopt = ip6_opt_dup(opt->hopopt,
+							   sk->sk_allocation);
+			if (opt->hopopt && !np->cork.opt->hopopt)
+				return -ENOBUFS;
+
+			np->cork.opt->srcrt = ip6_rthdr_dup(opt->srcrt,
+							    sk->sk_allocation);
+			if (opt->srcrt && !np->cork.opt->srcrt)
+				return -ENOBUFS;
+
 			/* need source address above miyazawa*/
 		}
 		dst_hold(&rt->u.dst);
@@ -1153,8 +1185,7 @@ int ip6_append_data(struct sock *sk, int
 	} else {
 		rt = (struct rt6_info *)inet->cork.dst;
 		fl = &inet->cork.fl;
-		if (inet->cork.flags & IPCORK_OPT)
-			opt = np->cork.opt;
+		opt = np->cork.opt;
 		transhdrlen = 0;
 		exthdrlen = 0;
 		mtu = inet->cork.fragsize;
@@ -1393,9 +1424,15 @@ error:
 
 static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np)
 {
-	inet->cork.flags &= ~IPCORK_OPT;
-	kfree(np->cork.opt);
-	np->cork.opt = NULL;
+	if (np->cork.opt) {
+		kfree(np->cork.opt->dst0opt);
+		kfree(np->cork.opt->dst1opt);
+		kfree(np->cork.opt->hopopt);
+		kfree(np->cork.opt->srcrt);
+		kfree(np->cork.opt);
+		np->cork.opt = NULL;
+	}
+
 	if (inet->cork.dst) {
 		dst_release(inet->cork.dst);
 		inet->cork.dst = NULL;
author
#23 lore raw

PATCH 23/47 net: 4 bytes kernel memory disclosure in SO_BSDCOMPAT gsopt try #2

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Cl�ment Lecigne <[email protected]>

[ Upstream commit df0bca049d01c0ee94afb7cd5dfd959541e6c8da ]

In function sock_getsockopt() located in net/core/sock.c, optval v.val is not correctly initialized and directly returned in userland in case we have SO_BSDCOMPAT option set.

This dummy code should trigger the bug:

int main(void)

{
	unsigned char buf[4] = { 0, 0, 0, 0 };
	int len;
	int sock;
	sock = socket(33, 2, 2);
	getsockopt(sock, 1, SO_BSDCOMPAT, &buf, &len);
	printf("%x%x%x%x\n", buf[0], buf[1], buf[2], buf[3]);
	close(sock);
}

Here is a patch that fix this bug by initalizing v.val just after its declaration.

---
 net/core/sock.c |    2 ++
 1 file changed, 2 insertions(+)
net/core/sock.c +2 -0
@@ -695,6 +695,8 @@ int sock_getsockopt(struct socket *sock,
 	if (len < 0)
 		return -EINVAL;
 
+	v.val = 0;
+
 	switch(optname) {
 	case SO_DEBUG:
 		v.val = sock_flag(sk, SOCK_DBG);
author
#24 lore raw

PATCH 24/47 net: packet socket packet_lookup_frame fix

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Sebastiano Di Paola <[email protected]>

[ Upstream commit f9e6934502e46c363100245f137ddf0f4b1cb574 ]

packet_lookup_frames() fails to get user frame if current frame header status contains extra flags.
This is due to the wrong assumption on the operators precedence during frame status tests.
Fixed by forcing the right operators precedence order with explicit brackets.

---
 net/packet/af_packet.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/packet/af_packet.c +4 -4
@@ -220,13 +220,13 @@ static void *packet_lookup_frame(struct 
 	h.raw = po->pg_vec[pg_vec_pos] + (frame_offset * po->frame_size);
 	switch (po->tp_version) {
 	case TPACKET_V1:
-		if (status != h.h1->tp_status ? TP_STATUS_USER :
-						TP_STATUS_KERNEL)
+		if (status != (h.h1->tp_status ? TP_STATUS_USER :
+						TP_STATUS_KERNEL))
 			return NULL;
 		break;
 	case TPACKET_V2:
-		if (status != h.h2->tp_status ? TP_STATUS_USER :
-						TP_STATUS_KERNEL)
+		if (status != (h.h2->tp_status ? TP_STATUS_USER :
+						TP_STATUS_KERNEL))
 			return NULL;
 		break;
 	}
author
#25 lore raw

PATCH 25/47 sky2: fix hard hang with netconsoling and iface going up

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Alexey Dobriyan <[email protected]>

[ Upstream commit a11da890e4c9850411303efcf6514f048ca880ee ]

Printing anything over netconsole before hw is up and running is, of course, not going to work.

---
 drivers/net/sky2.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/sky2.c +3 -3
@@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *de
 
  	}
 
-	if (netif_msg_ifup(sky2))
-		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
-
 	netif_carrier_off(dev);
 
 	/* must be power of 2 */
@@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *de
 	sky2_write32(hw, B0_IMSK, imask);
 
 	sky2_set_multicast(dev);
+
+	if (netif_msg_ifup(sky2))
+		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 	return 0;
 
 err_out:
author
#26 lore raw

PATCH 26/47 sungem: Soft lockup in sungem on Netra AC200 when switching interface up

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Ilkka Virta <[email protected]>

[ Upstream commit 71822faa3bc0af5dbf5e333a2d085f1ed7cd809f ]

From: Ilkka Virta <[email protected]>

In the lockup situation the driver seems to go off in an eternal storm of interrupts right after calling request_irq(). It doesn't actually do anything interesting in the interrupt handler. Since connecting the link afterwards works, something later in initialization must fix this.

Looking at gem_do_start() and gem_open(), it seems that the only thing done while opening the device after the request_irq(), is a call to napi_enable().

I don't know what the ordering requirements are for the initialization, but I boldly tried to move the napi_enable() call inside gem_do_start() before the link state is checked and interrupts subsequently enabled, and it seems to work for me. Doesn't even break anything too obvious...

---
 drivers/net/sungem.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/sungem.c +4 -4
@@ -2205,6 +2205,8 @@ static int gem_do_start(struct net_devic
 
 	gp->running = 1;
 
+	napi_enable(&gp->napi);
+
 	if (gp->lstate == link_up) {
 		netif_carrier_on(gp->dev);
 		gem_set_link_modes(gp);
@@ -2222,6 +2224,8 @@ static int gem_do_start(struct net_devic
 		spin_lock_irqsave(&gp->lock, flags);
 		spin_lock(&gp->tx_lock);
 
+		napi_disable(&gp->napi);
+
 		gp->running =  0;
 		gem_reset(gp);
 		gem_clean_rings(gp);
@@ -2322,8 +2326,6 @@ static int gem_open(struct net_device *d
 	if (!gp->asleep)
 		rc = gem_do_start(dev);
 	gp->opened = (rc == 0);
-	if (gp->opened)
-		napi_enable(&gp->napi);
 
 	mutex_unlock(&gp->pm_mutex);
 
@@ -2460,8 +2462,6 @@ static int gem_resume(struct pci_dev *pd
 
 		/* Re-attach net device */
 		netif_device_attach(dev);
-
-		napi_enable(&gp->napi);
 	}
 
 	spin_lock_irqsave(&gp->lock, flags);
author
#27 lore raw

PATCH 27/47 tun: Add some missing TUN compat ioctl translations.

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: David S. Miller <[email protected]>

[ Upstream commit df1c46b2b6876d0a1b1b4740f009fa69d95ebbc9 ]

Based upon a report from Michael Tokarev <[email protected]>:

	Just saw in dmesg:

	ioctl32(kvm:4408): Unknown cmd fd(9) cmd(800454cf){t:'T';sz:4} arg(ffc668e4) on /dev/net/tun
---
 fs/compat_ioctl.c |    7 +++++++
 1 file changed, 7 insertions(+)
fs/compat_ioctl.c +7 -0
@@ -538,6 +538,7 @@ static int dev_ifsioc(unsigned int fd, u
 		 * cannot be fixed without breaking all existing apps.
 		 */
 		case TUNSETIFF:
+		case TUNGETIFF:
 		case SIOCGIFFLAGS:
 		case SIOCGIFMETRIC:
 		case SIOCGIFMTU:
@@ -1982,6 +1983,11 @@ COMPATIBLE_IOCTL(TUNSETNOCSUM)
 COMPATIBLE_IOCTL(TUNSETDEBUG)
 COMPATIBLE_IOCTL(TUNSETPERSIST)
 COMPATIBLE_IOCTL(TUNSETOWNER)
+COMPATIBLE_IOCTL(TUNSETLINK)
+COMPATIBLE_IOCTL(TUNSETGROUP)
+COMPATIBLE_IOCTL(TUNGETFEATURES)
+COMPATIBLE_IOCTL(TUNSETOFFLOAD)
+COMPATIBLE_IOCTL(TUNSETTXFILTER)
 /* Big V */
 COMPATIBLE_IOCTL(VT_SETMODE)
 COMPATIBLE_IOCTL(VT_GETMODE)
@@ -2573,6 +2579,7 @@ HANDLE_IOCTL(SIOCGIFPFLAGS, dev_ifsioc)
 HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc)
 HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc)
 HANDLE_IOCTL(TUNSETIFF, dev_ifsioc)
+HANDLE_IOCTL(TUNGETIFF, dev_ifsioc)
 HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl)
 HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl)
 HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl)
author
#28 lore raw

PATCH 28/47 tun: Fix unicast filter overflow

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Alex Williamson <[email protected]>

[ Upstream commit cfbf84fcbcda98bb91ada683a8dc8e6901a83ebd ]

Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled.

---
 drivers/net/tun.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/net/tun.c +8 -2
@@ -157,10 +157,16 @@ static int update_filter(struct tap_filt
 
 	nexact = n;
 
-	/* The rest is hashed */
+	/* Remaining multicast addresses are hashed,
+	 * unicast will leave the filter disabled. */
 	memset(filter->mask, 0, sizeof(filter->mask));
-	for (; n < uf.count; n++)
+	for (; n < uf.count; n++) {
+		if (!is_multicast_ether_addr(addr[n].u)) {
+			err = 0; /* no filter */
+			goto done;
+		}
 		addr_hash_set(filter->mask, addr[n].u);
+	}
 
 	/* For ALLMULTI just set the mask to all ones.
 	 * This overrides the mask populated above. */
author
#29 lore raw

PATCH 29/47 udp: Fix UDP short packet false positive

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Jesper Dangaard Brouer <[email protected]>

[ Upstream commit 7b5e56f9d635643ad54f2f42e69ad16b80a2cff1 ]

The UDP header pointer assignment must happen after calling pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB buffer.

This was exposted by running multicast traffic through the NIU driver, as it won't prepull the protocol headers into the linear area on receive.

---
 net/ipv4/udp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv4/udp.c +2 -1
@@ -1172,7 +1172,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, 
 		   int proto)
 {
 	struct sock *sk;
-	struct udphdr *uh = udp_hdr(skb);
+	struct udphdr *uh;
 	unsigned short ulen;
 	struct rtable *rt = (struct rtable*)skb->dst;
 	__be32 saddr = ip_hdr(skb)->saddr;
@@ -1185,6 +1185,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, 
 	if (!pskb_may_pull(skb, sizeof(struct udphdr)))
 		goto drop;		/* No space for header. */
 
+	uh   = udp_hdr(skb);
 	ulen = ntohs(uh->len);
 	if (ulen > skb->len)
 		goto short_packet;
author
#30 lore raw

PATCH 30/47 udp: increments sk_drops in __udp_queue_rcv_skb()

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit e408b8dcb5ce42243a902205005208e590f28454 ]

Commit 93821778def10ec1e69aa3ac10adee975dad4ff3 (udp: Fix rcv socket locking) accidentally removed sk_drops increments for UDP IPV4 sockets.

This field can be used to detect incorrect sizing of socket receive buffers.

---
 net/ipv4/udp.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/ipv4/udp.c +3 -1
@@ -959,9 +959,11 @@ static int __udp_queue_rcv_skb(struct so
 
 	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
 		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM)
+		if (rc == -ENOMEM) {
 			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
 					 is_udplite);
+			atomic_inc(&sk->sk_drops);
+		}
 		goto drop;
 	}
 
author
#31 lore raw

PATCH 31/47 virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Alex Williamson <[email protected]>

[ Upstream commit e918085aaff34086e265f825dd469926b1aec4a4 ]

802.1Q expanded the maximum ethernet frame size by 4 bytes for the VLAN tag. We're not taking this into account in virtio_net, which means the buffers we provide to the backend in the virtqueue RX ring aren't big enough to hold a full MTU VLAN packet. For QEMU/KVM, this results in the backend exiting with a packet truncation error.

---
 drivers/net/virtio_net.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +2 -1
@@ -24,6 +24,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
+#include <linux/if_vlan.h>
 
 static int napi_weight = 128;
 module_param(napi_weight, int, 0444);
@@ -33,7 +34,7 @@ module_param(csum, bool, 0444);
 module_param(gso, bool, 0444);
 
 /* FIXME: MTU in config. */
-#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
+#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
 
 struct virtnet_info
 {
author
#32 lore raw

PATCH 32/47 net: Fix frag_list handling in skb_seq_read

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Herbert Xu <[email protected]>

[ Upstream commit 95e3b24cfb4ec0479d2c42f7a1780d68063a542a ]

The frag_list handling was broken in skb_seq_read:

1) We didn't add the stepped offset when looking at the head are of fragments other than the first.

2) We didn't take the stepped offset away when setting the data pointer in the head area.

3) The frag index wasn't reset.

This patch fixes both issues.

---
 net/core/skbuff.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/core/skbuff.c +3 -2
@@ -2001,10 +2001,10 @@ unsigned int skb_seq_read(unsigned int c
 		return 0;
 
 next_skb:
-	block_limit = skb_headlen(st->cur_skb);
+	block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
 
 	if (abs_offset < block_limit) {
-		*data = st->cur_skb->data + abs_offset;
+		*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
 		return block_limit - abs_offset;
 	}
 
@@ -2046,6 +2046,7 @@ next_skb:
 	} else if (st->root_skb == st->cur_skb &&
 		   skb_shinfo(st->root_skb)->frag_list) {
 		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
+		st->frag_idx = 0;
 		goto next_skb;
 	}
 
author
#33 lore raw

PATCH 33/47 net: Fix OOPS in skb_seq_read().

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Shyam Iyer <[email protected]>

[ Upstream commit 71b3346d182355f19509fadb8fe45114a35cc499 ]

It oopsd for me in skb_seq_read. addr2line said it was linux-2.6/net/core/skbuff.c:2228, which is this line:

	while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) {

I added some printks in there and it looks like we hit this:

        } else if (st->root_skb == st->cur_skb &&
                   skb_shinfo(st->root_skb)->frag_list) {
                 st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
                 st->frag_idx = 0;
                 goto next_skb;
        }

Actually I did some testing and added a few printks and found that the st->cur_skb->data was 0 and hence the ptr used by iscsi_tcp was null. This caused the kernel panic.

if (abs_offset < block_limit) {
- *data = st->cur_skb->data + abs_offset;
+ *data = st->cur_skb->data + (abs_offset - st->stepped_offset);

I enabled the debug_tcp and with a few printks found that the code did not go to the next_skb label and could find that the sequence being followed was this -

It hit this if condition -

        if (st->cur_skb->next) {
                st->cur_skb = st->cur_skb->next;
                st->frag_idx = 0;
                goto next_skb;

And so, now the st pointer is shifted to the next skb whereas actually it should have hit the second else if first since the data is in the frag_list.

        else if (st->root_skb == st->cur_skb &&
                 skb_shinfo(st->root_skb)->frag_list) {
                st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
                goto next_skb;
        }

Reversing the two conditions the attached patch fixes the issue for me on top of Herbert's patches.

---
 net/core/skbuff.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
net/core/skbuff.c +5 -5
@@ -2039,13 +2039,13 @@ next_skb:
 		st->frag_data = NULL;
 	}
 
-	if (st->cur_skb->next) {
-		st->cur_skb = st->cur_skb->next;
+	if (st->root_skb == st->cur_skb &&
+	    skb_shinfo(st->root_skb)->frag_list) {
+		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
 		st->frag_idx = 0;
 		goto next_skb;
-	} else if (st->root_skb == st->cur_skb &&
-		   skb_shinfo(st->root_skb)->frag_list) {
-		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
+	} else if (st->cur_skb->next) {
+		st->cur_skb = st->cur_skb->next;
 		st->frag_idx = 0;
 		goto next_skb;
 	}
author
#34 lore raw

PATCH 34/47 packet: Avoid lock_sock in mmap handler

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Herbert Xu <[email protected]>

[ Upstream commit 905db44087855e3c1709f538ecdc22fd149cadd8 ]

As the mmap handler gets called under mmap_sem, and we may grab mmap_sem elsewhere under the socket lock to access user data, we should avoid grabbing the socket lock in the mmap handler.

Since the only thing we care about in the mmap handler is for pg_vec* to be invariant, i.e., to exclude packet_set_ring, we can achieve this by simply using a new mutex.

---
 net/packet/af_packet.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
net/packet/af_packet.c +7 -2
@@ -77,6 +77,7 @@
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 
 #ifdef CONFIG_INET
 #include <net/inet_common.h>
@@ -175,6 +176,7 @@ struct packet_sock {
 #endif
 	struct packet_type	prot_hook;
 	spinlock_t		bind_lock;
+	struct mutex		pg_vec_lock;
 	unsigned int		running:1,	/* prot_hook is attached*/
 				auxdata:1,
 				origdev:1;
@@ -1068,6 +1070,7 @@ static int packet_create(struct net *net
 	 */
 
 	spin_lock_init(&po->bind_lock);
+	mutex_init(&po->pg_vec_lock);
 	po->prot_hook.func = packet_rcv;
 
 	if (sock->type == SOCK_PACKET)
@@ -1863,6 +1866,7 @@ static int packet_set_ring(struct sock *
 	synchronize_net();
 
 	err = -EBUSY;
+	mutex_lock(&po->pg_vec_lock);
 	if (closing || atomic_read(&po->mapped) == 0) {
 		err = 0;
 #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; })
@@ -1884,6 +1888,7 @@ static int packet_set_ring(struct sock *
 		if (atomic_read(&po->mapped))
 			printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped));
 	}
+	mutex_unlock(&po->pg_vec_lock);
 
 	spin_lock(&po->bind_lock);
 	if (was_running && !po->running) {
@@ -1916,7 +1921,7 @@ static int packet_mmap(struct file *file
 
 	size = vma->vm_end - vma->vm_start;
 
-	lock_sock(sk);
+	mutex_lock(&po->pg_vec_lock);
 	if (po->pg_vec == NULL)
 		goto out;
 	if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE)
@@ -1939,7 +1944,7 @@ static int packet_mmap(struct file *file
 	err = 0;
 
 out:
-	release_sock(sk);
+	mutex_unlock(&po->pg_vec_lock);
 	return err;
 }
 #endif
author
#35 lore raw

PATCH 35/47 tcp: splice as many packets as possible at once

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Willy Tarreau <[email protected]>

[ Upstream commit 33966dd0e2f68f26943cd9ee93ec6abbc6547a8e ]

As spotted by Willy Tarreau, current splice() from tcp socket to pipe is not optimal. It processes at most one segment per call.
This results in low performance and very high overhead due to syscall rate when splicing from interfaces which do not support LRO.

Willy provided a patch inside tcp_splice_read(), but a better fix is to let tcp_read_sock() process as many segments as possible, so that tcp_rcv_space_adjust() and tcp_cleanup_rbuf() are called less often.

With this change, splice() behaves like tcp_recvmsg(), being able to consume many skbs in one system call. With typical 1460 bytes of payload per frame, that means splice(SPLICE_F_NONBLOCK) can return 16*1460 = 23360 bytes.

---
 net/ipv4/tcp.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
net/ipv4/tcp.c +9 -2
@@ -518,8 +518,12 @@ static int tcp_splice_data_recv(read_des
 				unsigned int offset, size_t len)
 {
 	struct tcp_splice_state *tss = rd_desc->arg.data;
+	int ret;
 
-	return skb_splice_bits(skb, offset, tss->pipe, tss->len, tss->flags);
+	ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+	if (ret > 0)
+		rd_desc->count -= ret;
+	return ret;
 }
 
 static int __tcp_splice_read(struct sock *sk, struct tcp_splice_state *tss)
@@ -527,6 +531,7 @@ static int __tcp_splice_read(struct sock
 	/* Store TCP splice context information in read_descriptor_t. */
 	read_descriptor_t rd_desc = {
 		.arg.data = tss,
+		.count	  = tss->len,
 	};
 
 	return tcp_read_sock(sk, &rd_desc, tcp_splice_data_recv);
@@ -611,11 +616,13 @@ ssize_t tcp_splice_read(struct socket *s
 		tss.len -= ret;
 		spliced += ret;
 
+		if (!timeo)
+			break;
 		release_sock(sk);
 		lock_sock(sk);
 
 		if (sk->sk_err || sk->sk_state == TCP_CLOSE ||
-		    (sk->sk_shutdown & RCV_SHUTDOWN) || !timeo ||
+		    (sk->sk_shutdown & RCV_SHUTDOWN) ||
 		    signal_pending(current))
 			break;
 	}
author
#36 lore raw

PATCH 36/47 tcp: Fix length tcp_splice_data_recv passes to skb_splice_bits.

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Dimitris Michailidis <[email protected]>

[ Upstream commit 9fa5fdf291c9b58b1cb8b4bb2a0ee57efa21d635 ]

tcp_splice_data_recv has two lengths to consider: the len parameter it gets from tcp_read_sock, which specifies the amount of data in the skb, and rd_desc->count, which is the amount of data the splice caller still wants. Currently it passes just the latter to skb_splice_bits, which then splices min(rd_desc->count, skb->len - offset) bytes.

Most of the time this is fine, except when the skb contains urgent data. In that case len goes only up to the urgent byte and is less than skb->len - offset. By ignoring len tcp_splice_data_recv may a) splice data tcp_read_sock told it not to, b) return to tcp_read_sock a value > len.

Now, tcp_read_sock doesn't handle used > len and leaves the socket in a bad state (both sk_receive_queue and copied_seq are bad at that point) resulting in duplicated data and corruption.

Fix by passing min(rd_desc->count, len) to skb_splice_bits.

---
 net/ipv4/tcp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv4/tcp.c +2 -1
@@ -520,7 +520,8 @@ static int tcp_splice_data_recv(read_des
 	struct tcp_splice_state *tss = rd_desc->arg.data;
 	int ret;
 
-	ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+	ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len),
+			      tss->flags);
 	if (ret > 0)
 		rd_desc->count -= ret;
 	return ret;
author
#37 lore raw

PATCH 37/47 sparc: Enable syscall wrappers for 64-bit (CVE-2009-0029)

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Christian Borntraeger <[email protected]>

[ Upstream commit 67605d6812691bbd2158d2f60259e0407611bc1b ]

sparc64 needs sign-extended function parameters. We have to enable the system call wrappers.

---
 arch/sparc64/Kconfig |    1 +
 1 file changed, 1 insertion(+)
arch/sparc64/Kconfig +1 -0
@@ -15,6 +15,7 @@ config SPARC64
 	select HAVE_FTRACE
 	select HAVE_IDE
 	select HAVE_LMB
+	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_ARCH_KGDB
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_ARCH_TRACEHOOK
author
#38 lore raw

PATCH 38/47 sparc64: Annotate sparc64 specific syscalls with SYSCALL_DEFINEx()

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: David S. Miller <[email protected]>

[ Upstream commit e42650196df34789c825fa83f8bb37a5d5e52c14 ]

---
 arch/sparc64/kernel/sys_sparc.c |   48 +++++++++++++++++++---------------------
 arch/sparc64/kernel/syscalls.S  |    2 -
 arch/sparc64/kernel/systbls.S   |   16 ++++++-------
 arch/sparc64/kernel/systbls.h   |    3 --
 4 files changed, 32 insertions(+), 37 deletions(-)
arch/sparc64/kernel/syscalls.S +1 -1
@@ -21,7 +21,7 @@ execve_merge:
 
 	.align	32
 sys_sparc_pipe:
-	ba,pt	%xcc, sparc_pipe
+	ba,pt	%xcc, sys_sparc_pipe_real
 	 add	%sp, PTREGS_OFF, %o0
 sys_nis_syscall:
 	ba,pt	%xcc, c_sys_nis_syscall
arch/sparc64/kernel/sys_sparc.c +23 -25

120 lines not on this page · raw message

arch/sparc64/kernel/systbls.h +0 -3
@@ -16,9 +16,6 @@ extern asmlinkage long sys_ipc(unsigned 
 			       void __user *ptr, long fifth);
 extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
-extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-					 unsigned long prot, unsigned long flags,
-					 unsigned long fd, unsigned long off);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
 					     unsigned long old_len,
arch/sparc64/kernel/systbls.S +8 -8
@@ -21,7 +21,7 @@ sys_call_table32:
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*15*/	.word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
@@ -55,8 +55,8 @@ sys_call_table32:
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname
-/*190*/	.word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
+	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+/*190*/	.word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
 	.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
 	.word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
@@ -95,7 +95,7 @@ sys_call_table:
 /*0*/	.word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/	.word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
+/*15*/	.word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
 /*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
@@ -106,7 +106,7 @@ sys_call_table:
 	.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
 /*60*/	.word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize
 	.word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall
-/*70*/	.word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect
+/*70*/	.word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect
 	.word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups
 /*80*/	.word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall
 	.word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall
@@ -129,8 +129,8 @@ sys_call_table:
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname
-/*190*/	.word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+/*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
 	.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
@@ -142,7 +142,7 @@ sys_call_table:
 	.word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
 /*240*/	.word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
 	.word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/	.word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/	.word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
 	.word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
 /*260*/	.word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
 	.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
author
#39 lore raw

PATCH 39/47 netfilter: fix tuple inversion for Node information request

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Eric Leblond <[email protected]>

netfilter: fix tuple inversion for Node information request

Upstream commit: a51f42f3c

The patch fixes a typo in the inverse mapping of Node Information request. Following draft-ietf-ipngwg-icmp-name-lookups-09, "Querier" sends a type 139 (ICMPV6_NI_QUERY) packet to "Responder" which answer with a type 140 (ICMPV6_NI_REPLY) packet.

---
 net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c +2 -2
@@ -49,8 +49,8 @@ static bool icmpv6_pkt_to_tuple(const st
 static const u_int8_t invmap[] = {
 	[ICMPV6_ECHO_REQUEST - 128]	= ICMPV6_ECHO_REPLY + 1,
 	[ICMPV6_ECHO_REPLY - 128]	= ICMPV6_ECHO_REQUEST + 1,
-	[ICMPV6_NI_QUERY - 128]		= ICMPV6_NI_QUERY + 1,
-	[ICMPV6_NI_REPLY - 128]		= ICMPV6_NI_REPLY +1
+	[ICMPV6_NI_QUERY - 128]		= ICMPV6_NI_REPLY + 1,
+	[ICMPV6_NI_REPLY - 128]		= ICMPV6_NI_QUERY +1
 };
 
 static bool icmpv6_invert_tuple(struct nf_conntrack_tuple *tuple,
author
#40 lore raw

PATCH 40/47 netfilter: xt_sctp: sctp chunk mapping doesnt work

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Qu Haoran <[email protected]>

netfilter: xt_sctp: sctp chunk mapping doesn't work

Upstream commit: d4e2675a

When user tries to map all chunks given in argument, kernel works on a copy of the chunkmap, but at the end it doesn't check the copy, but the orginal one.

---
 net/netfilter/xt_sctp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/xt_sctp.c +1 -1
@@ -105,7 +105,7 @@ match_packet(const struct sk_buff *skb,
 
 	switch (chunk_match_type) {
 	case SCTP_CHUNK_MATCH_ALL:
-		return SCTP_CHUNKMAP_IS_CLEAR(info->chunkmap);
+		return SCTP_CHUNKMAP_IS_CLEAR(chunkmapcopy);
 	case SCTP_CHUNK_MATCH_ANY:
 		return false;
 	case SCTP_CHUNK_MATCH_ONLY:
author
#41 lore raw

PATCH 41/47 bluetooth hid: enable quirk handling for Apple Wireless Keyboards in 2.6.27

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Torsten Rausche <[email protected]>

This patch is basically a backport of
commit ee8a1a0a1a5817accd03ced7e7ffde3a4430f485 upstream which was made after the big HID overhaul in 2.6.28.

Kernel 2.6.27 fails to handle quirks for the aluminum Apple Wireless Keyboard because it is handled as USB device and not as Bluetooth device. This patch expands 'hidp_blacklist' to make the kernel handle the keyboard in the same way as the Apple wireless Mighty Mouse (also a Bluetooth device).

---

---
 net/bluetooth/hidp/core.c |    4 ++++
 1 file changed, 4 insertions(+)
net/bluetooth/hidp/core.c +4 -0
@@ -684,6 +684,10 @@ static const struct {
 } hidp_blacklist[] = {
 	/* Apple wireless Mighty Mouse */
 	{ 0x05ac, 0x030c, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
+	/* Apple Wireless Keyboard */
+	{ 0x05ac, 0x022c, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+	{ 0x05ac, 0x022d, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+	{ 0x05ac, 0x022e, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
 
 	{ }	/* Terminating entry */
 };
#42 lore raw

Re: [patch 41/47] bluetooth hid: enable quirk handling for Apple Wireless Keyboards in 2.6.27

Quoted 31 lines · Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Torsten Rausche <[email protected]>

This patch is basically a backport of
commit ee8a1a0a1a5817accd03ced7e7ffde3a4430f485 upstream which was made after the big HID overhaul in 2.6.28.

Kernel 2.6.27 fails to handle quirks for the aluminum Apple Wireless Keyboard because it is handled as USB device and not as Bluetooth device. This patch expands 'hidp_blacklist' to make the kernel handle the keyboard in the same way as the Apple wireless Mighty Mouse (also a Bluetooth device).

---

---
 net/bluetooth/hidp/core.c |    4 ++++
 1 file changed, 4 insertions(+)

net/bluetooth/hidp/core.c static const struct { · line 693

Quoted 10 lines
net/bluetooth/hidp/core.c +4 -0
@@ -684,6 +684,10 @@ static const struct {
 } hidp_blacklist[] = {
 	/* Apple wireless Mighty Mouse */
 	{ 0x05ac, 0x030c, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
+	/* Apple Wireless Keyboard */
+	{ 0x05ac, 0x022c, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+	{ 0x05ac, 0x022d, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+	{ 0x05ac, 0x022e, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
 
 	{ }	/* Terminating entry */
 };

A very similar fix has been proposed by Paul Collins (see
http://lkml.org/lkml/2008/6/14/26 ) a while ago.

Here on my ppc32 G4 it works only if I apply the following as well. I can't test it on x86, though.

Jan Scholz

--
removed 2 calls to le16_to_cpu from the bluetooth hid quirks

seems we're doing some endianness conversion one time to much

net/bluetooth/hidp/core.c +2 -2
index 28dc035..6b95a6d 100644
@@ -699,8 +699,8 @@ static void hidp_setup_quirks(struct hid_device *hid)
        unsigned int n;
 
        for (n = 0; hidp_blacklist[n].idVendor; n++)
-               if (hidp_blacklist[n].idVendor == le16_to_cpu(hid->vendor) &&
-                               hidp_blacklist[n].idProduct == le16_to_cpu(hid->product))
+               if (hidp_blacklist[n].idVendor == hid->vendor &&
+                               hidp_blacklist[n].idProduct == hid->product)
                        hid->quirks = hidp_blacklist[n].quirks;
 }
 
#43 lore raw

Re: [patch 41/47] bluetooth hid: enable quirk handling for Apple Wireless Keyboards in 2.6.27

Quoted 2 lines · Jan Scholz

A very similar fix has been proposed by Paul Collins (see
http://lkml.org/lkml/2008/6/14/26 ) a while ago.

Good catch, did not see that. This is essentially the same fix. One more reason to let it go in.

Quoted 15 lines

Here on my ppc32 G4 it works only if I apply the following as well. I can't test it on x86, though.

Jan Scholz

--
removed 2 calls to le16_to_cpu from the bluetooth hid quirks

seems we're doing some endianness conversion one time to much

net/bluetooth/hidp/core.c +0 -0
index 28dc035..6b95a6d 100644

net/bluetooth/hidp/core.c static void hidp_setup_quirks(struct hid_device *hid) · line 705

Quoted 9 lines
net/bluetooth/hidp/core.c +2 -2
@@ -699,8 +699,8 @@ static void hidp_setup_quirks(struct hid_device *hid)
        unsigned int n;
 
        for (n = 0; hidp_blacklist[n].idVendor; n++)
-               if (hidp_blacklist[n].idVendor == le16_to_cpu(hid->vendor) &&
-                               hidp_blacklist[n].idProduct == le16_to_cpu(hid->product))
+               if (hidp_blacklist[n].idVendor == hid->vendor &&
+                               hidp_blacklist[n].idProduct == hid->product)
                        hid->quirks = hidp_blacklist[n].quirks;
 }

Well, then the wireless Mighty Mouse should never have worked on ppc. I just tested these changes on my x86_64 box and the keyboard still works fine.

Actually this is a fix for just another problem. Should these patches be combined? How is this handled? I am not familiar with this process.

Torsten

author
#44 lore raw

PATCH 42/47 HID: adjust report descriptor fixup for MS 1028 receiver

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Jiri Kosina <[email protected]>

commit 0fb21de0799a985d2da3da14ae5625d724256638 upstream

HID: adjust report descriptor fixup for MS 1028 receiver [Backport to 2.6.27: [email protected]]

Report descriptor fixup for MS 1028 receiver changes also values for Keyboard and Consumer, which incorrectly trims the range, causing correct events being thrown away before passing to userspace.

We need to keep the GenDesk usage fixup though, as it reports totally bogus values about axis.

---
 drivers/hid/usbhid/hid-quirks.c |   16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
drivers/hid/usbhid/hid-quirks.c +4 -12
@@ -1130,24 +1130,16 @@ static void usbhid_fixup_button_consumer
 }
 
 /*
- * Microsoft Wireless Desktop Receiver (Model 1028) has several
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
  * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
  */
 static void usbhid_fixup_microsoft_descriptor(unsigned char *rdesc, int rsize)
 {
-	if (rsize == 571 && rdesc[284] == 0x19
-	                 && rdesc[286] == 0x2a
-	                 && rdesc[304] == 0x19
-	                 && rdesc[306] == 0x29
-	                 && rdesc[352] == 0x1a
-	                 && rdesc[355] == 0x2a
-			 && rdesc[557] == 0x19
+	if (rsize == 571 && rdesc[557] == 0x19
 			 && rdesc[559] == 0x29) {
 		printk(KERN_INFO "Fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
-		rdesc[284] = rdesc[304] = rdesc[557] = 0x35;
-		rdesc[352] = 0x36;
-		rdesc[286] = rdesc[355] = 0x46;
-		rdesc[306] = rdesc[559] = 0x45;
+		rdesc[557] = 0x35;
+		rdesc[559] = 0x45;
 	}
 }
 
author
#45 lore raw

PATCH 43/47 libata: fix EH device failure handling

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Tejun Heo <[email protected]>

commit d89293abd95bfd7dd9229087d6c30c1464c5ac83 upstream.

The dev->pio_mode > XFER_PIO_0 test is there to avoid unnecessary speed down warning messages but it accidentally disabled SATA link spd down during configuration phase after reset where PIO mode is always zero.

This patch fixes the problem by moving the test where it belongs. This makes libata probing sequence behave better when the connection is flaky at higher link speeds which isn't too uncommon for eSATA devices.

[[email protected]: trivial backport to 2.6.27]

---
 drivers/ata/libata-eh.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/ata/libata-eh.c +3 -2
@@ -2694,12 +2694,13 @@ static int ata_eh_handle_dev_fail(struct
 		/* give it just one more chance */
 		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
 	case -EIO:
-		if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
+		if (ehc->tries[dev->devno] == 1) {
 			/* This is the last chance, better to slow
 			 * down than lose it.
 			 */
 			sata_down_spd_limit(dev->link);
-			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+			if (dev->pio_mode > XFER_PIO_0)
+				ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
 		}
 	}
 
author
#46 lore raw

PATCH 44/47 ide/libata: fix ata_id_is_cfa() (take 4)

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Sergei Shtylyov <[email protected]>

commit 2999b58b795ad81f10e34bdbbfd2742172f247e4 upstream.

When checking for the CFA feature set support, ata_id_is_cfa() tests bit 2 in word 82 of the identify data instead the word 83; it also checks the ATA/PI version support in the word 80 (which the CompactFlash specifications have as reserved), this having no slightest chance to work on the modern CF cards that don't have 0x848A in the word 0...

---
 include/linux/ata.h |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
include/linux/ata.h +10 -5
@@ -681,12 +681,17 @@ static inline int ata_id_current_chs_val
 
 static inline int ata_id_is_cfa(const u16 *id)
 {
-	if (id[ATA_ID_CONFIG] == 0x848A)	/* Standard CF */
+	if (id[ATA_ID_CONFIG] == 0x848A)	/* Traditional CF */
 		return 1;
-	/* Could be CF hiding as standard ATA */
-	if (ata_id_major_version(id) >= 3 &&
-	    id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
-	   (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
+	/*
+	 * CF specs don't require specific value in the word 0 anymore and yet
+	 * they forbid to report the ATA version in the word 80 and require the
+	 * CFA feature set support to be indicated in the word 83 in this case.
+	 * Unfortunately, some cards only follow either of this requirements,
+	 * and while those that don't indicate CFA feature support need some
+	 * sort of quirk list, it seems impractical for the ones that do...
+	 */
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004)
 		return 1;
 	return 0;
 }
author
#47 lore raw

PATCH 45/47 x86: fixup config space size of CPU functions for AMD family 11h

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Andreas Herrmann <[email protected]>

commit ffd565a8b817d1eb4b25184e8418e8d96c3f56f6 upstream.

Impact: extend allowed configuration space access on 11h CPUs from 256 to 4K

---
 arch/x86/pci/fixup.c |   25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
arch/x86/pci/fixup.c +14 -11
@@ -496,18 +496,21 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S
 			  pci_siemens_interrupt_controller);
 
 /*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes.  Even if the device is capable, that doesn't mean we can
- * access it.  Maybe we don't have a way to generate extended config space
- * accesses.   So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
  */
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
 {
 	dev->cfg_size = pci_cfg_space_size_ext(dev);
 }
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
author
#48 lore raw

PATCH 46/47 mac80211: fix a buffer overrun in station debug code

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Jianjun Kong <[email protected]>

commit 013cd397532e5803a1625954a884d021653da720 upstream.

net/mac80211/debugfs_sta.c
The trailing zero was written to state[4], it's out of bounds.

---
 net/mac80211/debugfs_sta.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/debugfs_sta.c +1 -1
@@ -200,7 +200,7 @@ static ssize_t sta_agg_status_write(stru
 		/* toggle Rx aggregation command */
 		tid_num = tid_num - 100;
 		if (tid_static_rx[tid_num] == 1) {
-			strcpy(state, "off ");
+			strcpy(state, "off");
 			ieee80211_sta_stop_rx_ba_session(dev, da, tid_num, 0,
 					WLAN_REASON_QSTA_REQUIRE_SETUP);
 			sta->ampdu_mlme.tid_state_rx[tid_num] |=
author
#49 lore raw

PATCH 47/47 ALSA: mtpav - Fix initial value for input hwport

In reply to Greg KH

2.6.27-stable review patch. If anyone has any objections, please let us know.

------------------

From: Takashi Iwai <[email protected]>

commit 32cf9a16f4af01573ddec1eb073111fc20a9d7d4 upstream.

Fix the initial value for input hwport. The old value (-1) may cause Oops when an realtime MIDI byte is received before the input port is explicitly given.
Instead, now it's set to the broadcasting as default.

---
 sound/drivers/mtpav.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/drivers/mtpav.c +2 -1
@@ -706,7 +706,6 @@ static int __devinit snd_mtpav_probe(str
 	mtp_card->card = card;
 	mtp_card->irq = -1;
 	mtp_card->share_irq = 0;
-	mtp_card->inmidiport = 0xffffffff;
 	mtp_card->inmidistate = 0;
 	mtp_card->outmidihwport = 0xffffffff;
 	init_timer(&mtp_card->timer);
@@ -715,6 +714,8 @@ static int __devinit snd_mtpav_probe(str
 
 	card->private_free = snd_mtpav_free;
 
+	mtp_card->inmidiport = mtp_card->num_ports + MTPAV_PIDX_BROADCAST;
+
 	err = snd_mtpav_get_ISA(mtp_card);
 	if (err < 0)
 		goto __error;