scsi: aic7xxx hang since v2.6.28-rc1 ...
Here's an SCSI regression i tracked down recently. I'll follow up with more info.
I noticed it in the previous merge window (i.e. 3 months ago!) but couldnt properly debug until recently.
The problem is that a 32-bit testbox i have (it has aic7xxx) locks up sporadically (often long after bootup) in scsi_request_fn():
Pid: 0, comm: swapper Not tainted (2.6.27-06994-g70740d6-dirty #37) P4DC6
EIP: 0060:[<c0d35979>] EFLAGS: 00000206 CPU: 0
EIP is at _spin_unlock_irq+0x29/0x30
EAX: 169b6ee2 EBX: f6211f00 ECX: 00000001 EDX: 00000001
ESI: f6bf2000 EDI: f6bb76c0 EBP: c127fdb8 ESP: c127fdb8
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 44c47230 CR3: 359a5000 CR4: 00000650
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Call Trace: [<c07cffbc>] scsi_request_fn+0x7c/0x490 [<c049f645>] blk_invoke_request_fn+0x35/0x70 [<c049f6e2>] __blk_run_queue+0x22/0x30 [<c07cf59a>] scsi_run_queue+0x12a/0x240 [<c07ca07e>] ? scsi_put_command+0x4e/0x60 [<c07cf7f8>] scsi_next_command+0x38/0x50 [<c07cf898>] scsi_end_request+0x88/0xa0 [<c07cf9d1>] scsi_io_completion+0x121/0x460 [<c014db65>] ? trace_hardirqs_on_caller+0x75/0x140 [<c08bbe2d>] ? sd_done+0xd/0x190 [<c07c991d>] scsi_finish_command+0x8d/0xc0 [<c07cfec6>] scsi_softirq_done+0x96/0x110 [<c014db65>] ? trace_hardirqs_on_caller+0x75/0x140 [<c04a380d>] blk_done_softirq+0x6d/0x80 [<c012ea5f>] __do_softirq+0x6f/0x110 [<c012eb65>] do_softirq+0x65/0x70 [<c012ec95>] irq_exit+0x65/0x90 [<c0106279>] do_IRQ+0x79/0x90 [<c014dbee>] ? trace_hardirqs_on_caller+0xfe/0x140 [<c0104ab0>] common_interrupt+0x28/0x30 [<c014007b>] ? posix_cpu_timer_get+0x14b/0x250 [<c010a75a>] ? poll_idle+0x2a/0x40 [<c01028c6>] cpu_idle+0x46/0x90 [<c0cc879d>] rest_init+0x4d/0x60
it takes anywhere up to 10 reboots to trigger such a hang, so it's close to impossible to bisect it. I've attached the config and a full bootlog. The scsi driver in question is:
aic7xxx 0000:03:04.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
and the box is a reliable server platform with a good stability track record.
Any ideas what's wrong? If it hangs in the place above it never gets unstuck - i once waited hours for it to eventually continue.
I have two reliable bisection points:
v2.6.27-rc1 is definitely a 'good' kernel
and:
70740d6: Merge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/
is a 'bad' kernel.
Based on the timeline (i got the first hang on record on Oct 31 2008), i would suspect one of these merges:
c53dbf5: Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
ed09441: Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
ef5bef3: Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
e26feff: Merge branch 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block
that brought in the bad commit.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.27
# Mon Jan 19 15:19:49 2009
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=yCONFIG_BOOTPARAM_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not setCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not setCONFIG_BOOTPARAM_MAXCPUS_1=yCONFIG_BOOTPARAM_NOSMP=yCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_MARKERS=y
# CONFIG_OPROFILE is not setCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_BLOCK=yCONFIG_LBD=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_LSF=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not setCONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="anticipatory"CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_BOOTPARAM_NO_HZ_OFF is not setCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_BOOTPARAM_HIGHRES_OFF=y
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not setCONFIG_X86_RDC321X=yCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not setCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not setCONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not setCONFIG_X86_GENERIC=yCONFIG_X86_CPU=yCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_XADD=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_CYRIX_32=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR_32=yCONFIG_CPU_SUP_TRANSMETA_32=yCONFIG_CPU_SUP_UMC_32=yCONFIG_X86_DS=y
# CONFIG_X86_PTRACE_BTS is not setCONFIG_HPET_TIMER=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not setCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not setCONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not setCONFIG_VM86=yCONFIG_TOSHIBA=yCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=yCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=yCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not setCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not setCONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_EFI=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x100000CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not setCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=yCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not setCONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_THERMAL is not setCONFIG_ACPI_WMI=yCONFIG_ACPI_ASUS=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_DEBUG_FUNC_TRACE=yCONFIG_ACPI_EC=yCONFIG_ACPI_PCI_SLOT=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=y
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not setCONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_OLPC=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=y
# CONFIG_ARCH_SUPPORTS_MSI is not setCONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not setCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not setCONFIG_MCA=y
# CONFIG_MCA_LEGACY is not set
# CONFIG_SCx200 is not setCONFIG_OLPC=yCONFIG_K8_NB=y
# CONFIG_PCCARD is not setCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=yCONFIG_HOTPLUG_PCI_COMPAQ=yCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_ACPI is not setCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0 is not set
# CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_1 is not set
# CONFIG_BOOTPARAM_NOAPIC is not set
# CONFIG_BOOTPARAM_NOLAPIC is not set
# CONFIG_BOOTPARAM_NOLAPIC_TIMER is not setCONFIG_BOOTPARAM_LAPIC=y
# CONFIG_BOOTPARAM_HPET_DISABLE is not setCONFIG_BOOTPARAM_IDLE_MWAIT=yCONFIG_BOOTPARAM_IDLE_POLL=yCONFIG_BOOTPARAM_HIGHMEM_512M=yCONFIG_BOOTPARAM_NOPAT=yCONFIG_BOOTPARAM_NOTSC=y
# CONFIG_BOOTPARAM_ACPI_OFF is not set
# CONFIG_BOOTPARAM_PCI_NOACPI is not setCONFIG_BOOTPARAM_PCI_NOMSI=y
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_HAVE_AOUT=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set CONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=yCONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_ARPD=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=yCONFIG_INET6_ESP=yCONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set CONFIG_IPV6_MROUTE=yCONFIG_IPV6_PIMSM_V2=yCONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=y CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y
# CONFIG_NETFILTER_NETLINK_LOG is not set CONFIG_NF_CONNTRACK=yCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=y CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=y CONFIG_NF_CONNTRACK_H323=y
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set CONFIG_NF_CONNTRACK_PPTP=y CONFIG_NF_CONNTRACK_SANE=y
# CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set CONFIG_NETFILTER_XT_TARGET_NOTRACK=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y CONFIG_NETFILTER_XT_TARGET_TRACE=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=y CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set CONFIG_NETFILTER_XT_MATCH_IPRANGE=y CONFIG_NETFILTER_XT_MATCH_LENGTH=y
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=y CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set CONFIG_NETFILTER_XT_MATCH_QUOTA=y
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set CONFIG_NETFILTER_XT_MATCH_RECENT=y
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=y CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=yCONFIG_NF_CONNTRACK_IPV4=yCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_QUEUE=yCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_ADDRTYPE=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not setCONFIG_IP_NF_MATCH_TTL=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_TARGET_LOG=yCONFIG_IP_NF_TARGET_ULOG=y
# CONFIG_NF_NAT is not setCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_CLUSTERIP=yCONFIG_IP_NF_TARGET_ECN=y
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not setCONFIG_IP_NF_SECURITY=yCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=yCONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=yCONFIG_IP6_NF_QUEUE=yCONFIG_IP6_NF_IPTABLES=yCONFIG_IP6_NF_MATCH_AH=yCONFIG_IP6_NF_MATCH_EUI64=yCONFIG_IP6_NF_MATCH_FRAG=y
# CONFIG_IP6_NF_MATCH_OPTS is not setCONFIG_IP6_NF_MATCH_HL=yCONFIG_IP6_NF_MATCH_IPV6HEADER=y
# CONFIG_IP6_NF_MATCH_MH is not setCONFIG_IP6_NF_MATCH_RT=yCONFIG_IP6_NF_TARGET_LOG=yCONFIG_IP6_NF_FILTER=yCONFIG_IP6_NF_TARGET_REJECT=y
# CONFIG_IP6_NF_MANGLE is not setCONFIG_IP6_NF_RAW=yCONFIG_IP6_NF_SECURITY=y
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not setCONFIG_BRIDGE_NF_EBTABLES=y
# CONFIG_BRIDGE_EBT_BROUTE is not set
# CONFIG_BRIDGE_EBT_T_FILTER is not setCONFIG_BRIDGE_EBT_T_NAT=yCONFIG_BRIDGE_EBT_802_3=yCONFIG_BRIDGE_EBT_AMONG=yCONFIG_BRIDGE_EBT_ARP=yCONFIG_BRIDGE_EBT_IP=yCONFIG_BRIDGE_EBT_IP6=yCONFIG_BRIDGE_EBT_LIMIT=yCONFIG_BRIDGE_EBT_MARK=yCONFIG_BRIDGE_EBT_PKTTYPE=yCONFIG_BRIDGE_EBT_STP=y
# CONFIG_BRIDGE_EBT_VLAN is not setCONFIG_BRIDGE_EBT_ARPREPLY=yCONFIG_BRIDGE_EBT_DNAT=y
# CONFIG_BRIDGE_EBT_MARK_T is not setCONFIG_BRIDGE_EBT_REDIRECT=yCONFIG_BRIDGE_EBT_SNAT=yCONFIG_BRIDGE_EBT_LOG=yCONFIG_BRIDGE_EBT_ULOG=yCONFIG_BRIDGE_EBT_NFLOG=yCONFIG_IP_DCCP=yCONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2=yCONFIG_IP_DCCP_CCID2_DEBUG=yCONFIG_IP_DCCP_CCID3=yCONFIG_IP_DCCP_CCID3_DEBUG=yCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=yCONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=yCONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not setCONFIG_TIPC_DEBUG=yCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not setCONFIG_STP=yCONFIG_BRIDGE=yCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not setCONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not setCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=yCONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not setCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=yCONFIG_IPX=yCONFIG_IPX_INTERN=y
# CONFIG_ATALK is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not setCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_ATM=yCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_MULTIQ=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not setCONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not setCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_FLOW=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not setCONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not setCONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not setCONFIG_ROSE=y
#
# AX.25 network device drivers
#CONFIG_MKISS=yCONFIG_6PACK=y
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not setCONFIG_BAYCOM_SER_HDX=yCONFIG_BAYCOM_PAR=yCONFIG_BAYCOM_EPP=y
# CONFIG_YAM is not set
# CONFIG_CAN is not setCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=yCONFIG_IRCOMM=yCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not setCONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not setCONFIG_SIGMATEL_FIR=yCONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not setCONFIG_SMC_IRCC_FIR=yCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_MCS_FIR=yCONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not setCONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not setCONFIG_BT_HCIBFUSB=yCONFIG_BT_HCIVHCI=yCONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_PHONET is not setCONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not setCONFIG_RFKILL=yCONFIG_RFKILL_INPUT=yCONFIG_RFKILL_LEDS=yCONFIG_NET_9P=yCONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_SERIAL=yCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not setCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=yCONFIG_BLK_DEV_NBD=yCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_UB=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=y
# CONFIG_EEPROM_93CX6 is not setCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not setCONFIG_ACER_WMI=y
# CONFIG_FUJITSU_LAPTOP is not setCONFIG_TC1100_WMI=y
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not setCONFIG_EEEPC_LAPTOP=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not setCONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not setCONFIG_SCSI_SAS_LIBSAS_DEBUG=yCONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_SRP_TGT_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=yCONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not setCONFIG_SCSI_ACARD=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=1000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not setCONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not setCONFIG_SCSI_ADVANSYS=yCONFIG_SCSI_ARCMSR=y
# CONFIG_SCSI_ARCMSR_AER is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not setCONFIG_SCSI_DMX3191D=yCONFIG_SCSI_EATA=yCONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not setCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=yCONFIG_SCSI_GDTH=yCONFIG_SCSI_IBMMCA=yCONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
# CONFIG_IBMMCA_SCSI_DEV_RESET is not setCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=yCONFIG_SCSI_INIA100=yCONFIG_SCSI_PPA=y
# CONFIG_SCSI_IMM is not setCONFIG_SCSI_IZIP_EPP16=yCONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_MVSAS is not setCONFIG_SCSI_NCR_D700=yCONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_IPR=yCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_NCR_Q720=yCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not setCONFIG_SCSI_LPFC=y
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not setCONFIG_SCSI_DC390T=yCONFIG_SCSI_NSP32=yCONFIG_SCSI_SRP=yCONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not setCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=yCONFIG_SATA_SX4=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not setCONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not setCONFIG_PATA_ACPI=yCONFIG_PATA_ALI=yCONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not setCONFIG_PATA_ATIIXP=yCONFIG_PATA_CMD640_PCI=yCONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not setCONFIG_PATA_CS5536=y
# CONFIG_PATA_CYPRESS is not setCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not setCONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not setCONFIG_PATA_IT821X=yCONFIG_PATA_IT8213=yCONFIG_PATA_JMICRON=yCONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=yCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=yCONFIG_PATA_NS87415=yCONFIG_PATA_OPTI=yCONFIG_PATA_OPTIDMA=yCONFIG_PATA_PDC_OLD=yCONFIG_PATA_RADISYS=y
# CONFIG_PATA_RZ1000 is not setCONFIG_PATA_SC1200=yCONFIG_PATA_SERVERWORKS=yCONFIG_PATA_PDC2027X=yCONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not setCONFIG_PATA_VIA=yCONFIG_PATA_WINBOND=yCONFIG_PATA_SCH=yCONFIG_MD=yCONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not setCONFIG_MD_RAID10=yCONFIG_MD_RAID456=yCONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not setCONFIG_MD_FAULTY=yCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=yCONFIG_DM_SNAPSHOT=yCONFIG_DM_MIRROR=yCONFIG_DM_ZERO=yCONFIG_DM_MULTIPATH=yCONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not setCONFIG_FIREWIRE_SBP2=yCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=yCONFIG_IEEE1394_PCILYNX=yCONFIG_IEEE1394_SBP2=yCONFIG_IEEE1394_SBP2_PHYS_DMA=y CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=yCONFIG_IEEE1394_VIDEO1394=yCONFIG_IEEE1394_DV1394=yCONFIG_IEEE1394_VERBOSEDEBUG=y
# CONFIG_I2O is not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_DUMMY=yCONFIG_BONDING=yCONFIG_MACVLAN=yCONFIG_EQUALIZER=yCONFIG_TUN=y
# CONFIG_VETH is not setCONFIG_NET_SB1000=yCONFIG_ARCNET=yCONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not setCONFIG_ARCNET_RAW=yCONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not setCONFIG_ARCNET_COM20020=yCONFIG_ARCNET_COM20020_PCI=yCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set CONFIG_VORTEX=yCONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set
# CONFIG_ENC28J60 is not set CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not setCONFIG_TULIP=yCONFIG_TULIP_MWI=yCONFIG_TULIP_MMIO=yCONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=y
# CONFIG_WINBOND_840 is not set CONFIG_DM9102=yCONFIG_ULI526X=yCONFIG_DEPCA=yCONFIG_HP100=yCONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=yCONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not setCONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_EEPRO100=yCONFIG_E100=y
# CONFIG_FEALNX is not set CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set CONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=y
# CONFIG_SIS900 is not set CONFIG_EPIC100=yCONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=y
# CONFIG_VIA_RHINE is not set CONFIG_SC92031=yCONFIG_NET_POCKET=yCONFIG_ATP=yCONFIG_DE600=yCONFIG_DE620=yCONFIG_ATL2=yCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not setCONFIG_DL2K=yCONFIG_E1000=yCONFIG_E1000E=yCONFIG_IP1000=yCONFIG_IGB=y
# CONFIG_IGB_LRO is not set CONFIG_NS83820=yCONFIG_HAMACHI=yCONFIG_YELLOWFIN=yCONFIG_R8169=yCONFIG_SIS190=yCONFIG_SKGE=yCONFIG_SKGE_DEBUG=yCONFIG_SKY2=yCONFIG_SKY2_DEBUG=yCONFIG_VIA_VELOCITY=yCONFIG_TIGON3=yCONFIG_BNX2=yCONFIG_QLA3XXX=yCONFIG_ATL1=yCONFIG_ATL1E=yCONFIG_JME=y
# CONFIG_NETDEV_10000 is not set CONFIG_MLX4_CORE=y
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not setCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not setCONFIG_WAN=yCONFIG_LANMEDIA=yCONFIG_HDLC=yCONFIG_HDLC_RAW=yCONFIG_HDLC_RAW_ETH=yCONFIG_HDLC_CISCO=y
# CONFIG_HDLC_FR is not setCONFIG_HDLC_PPP=yCONFIG_HDLC_X25=yCONFIG_PCI200SYN=yCONFIG_WANXL=y
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not setCONFIG_DLCI=yCONFIG_DLCI_MAX=8
# CONFIG_LAPBETHER is not setCONFIG_X25_ASY=y
# CONFIG_SBNI is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=y
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not setCONFIG_ATM_ENI=yCONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not setCONFIG_ATM_ZATM=yCONFIG_ATM_ZATM_DEBUG=yCONFIG_ATM_NICSTAR=yCONFIG_ATM_NICSTAR_USE_SUNI=yCONFIG_ATM_NICSTAR_USE_IDT77105=yCONFIG_ATM_IDT77252=yCONFIG_ATM_IDT77252_DEBUG=yCONFIG_ATM_IDT77252_RCV_ALL=yCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=yCONFIG_ATM_AMBASSADOR_DEBUG=yCONFIG_ATM_HORIZON=yCONFIG_ATM_HORIZON_DEBUG=yCONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=yCONFIG_ATM_HE_USE_SUNI=yCONFIG_FDDI=yCONFIG_DEFXX=yCONFIG_DEFXX_MMIO=yCONFIG_SKFP=y
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not setCONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not setCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_ISDN=y
# CONFIG_MISDN is not setCONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not setCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#CONFIG_ISDN_DRV_GIGASET=yCONFIG_GIGASET_BASE=y
# CONFIG_GIGASET_M105 is not set
# CONFIG_GIGASET_M101 is not setCONFIG_GIGASET_DEBUG=yCONFIG_GIGASET_UNDOCREQ=yCONFIG_ISDN_CAPI=yCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=y
# CONFIG_ISDN_CAPI_CAPI20 is not set
# CONFIG_ISDN_CAPI_CAPIDRV is not set
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not setCONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_XTKBD=yCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_GPIO=yCONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not setCONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_GPIO=yCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=yCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=yCONFIG_JOYSTICK_GRIP=y
# CONFIG_JOYSTICK_GRIP_MP is not setCONFIG_JOYSTICK_GUILLEMOT=y
# CONFIG_JOYSTICK_INTERACT is not setCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not setCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not setCONFIG_JOYSTICK_TURBOGRAFX=yCONFIG_JOYSTICK_JOYDUMP=yCONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not setCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not setCONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_KBTAB is not setCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not setCONFIG_TOUCHSCREEN_FUJITSU=yCONFIG_TOUCHSCREEN_GUNZE=yCONFIG_TOUCHSCREEN_ELO=yCONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_INEXIO is not setCONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not setCONFIG_TOUCHSCREEN_TOUCHRIGHT=yCONFIG_TOUCHSCREEN_TOUCHWIN=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=yCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not setCONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not setCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not setCONFIG_SERIO_PARKBD=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not setCONFIG_GAMEPORT_EMU10K1=yCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not setCONFIG_CYCLADES=yCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not setCONFIG_SYNCLINK_GT=yCONFIG_N_HDLC=yCONFIG_RISCOM8=yCONFIG_SPECIALIX=yCONFIG_SX=yCONFIG_RIO=yCONFIG_RIO_OLDPCI=yCONFIG_STALDRV=yCONFIG_STALLION=yCONFIG_ISTALLION=yCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=yCONFIG_SERIAL_8250_MCA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=yCONFIG_LP_CONSOLE=yCONFIG_PPDEV=yCONFIG_HVC_DRIVER=yCONFIG_IPMI_HANDLER=yCONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not setCONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not setCONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=yCONFIG_CS5535_GPIO=y
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not setCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not setCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not setCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not setCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not setCONFIG_I2C_VIA=yCONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not setCONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_SCx200_ACB=y
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=yCONFIG_AT24=yCONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not setCONFIG_TPS65010=y
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not setCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=yCONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not setCONFIG_SPI=yCONFIG_SPI_DEBUG=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=yCONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#CONFIG_SPI_AT25=yCONFIG_SPI_SPIDEV=yCONFIG_SPI_TLE62X0=yCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=yCONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not setCONFIG_GPIO_PCA953X=yCONFIG_GPIO_PCF857X=y
#
# PCI GPIO expanders:
#CONFIG_GPIO_BT8XX=y
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=yCONFIG_GPIO_MCP23S08=yCONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=yCONFIG_W1_MASTER_DS2482=yCONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=yCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2433=yCONFIG_W1_SLAVE_DS2433_CRC=yCONFIG_W1_SLAVE_DS2760=yCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=yCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_OLPC=yCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_SENSORS_ABITUGURU=yCONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7414 is not setCONFIG_SENSORS_AD7418=yCONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_ADM1021 is not setCONFIG_SENSORS_ADM1025=yCONFIG_SENSORS_ADM1026=yCONFIG_SENSORS_ADM1029=yCONFIG_SENSORS_ADM1031=yCONFIG_SENSORS_ADM9240=yCONFIG_SENSORS_ADT7470=yCONFIG_SENSORS_ADT7473=yCONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not setCONFIG_SENSORS_DS1621=yCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not setCONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_GL518SM is not setCONFIG_SENSORS_GL520SM=yCONFIG_SENSORS_CORETEMP=yCONFIG_SENSORS_IBMAEM=yCONFIG_SENSORS_IBMPEX=y
# CONFIG_SENSORS_IT87 is not setCONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not setCONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not setCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not setCONFIG_SENSORS_LM87=yCONFIG_SENSORS_LM90=yCONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not setCONFIG_SENSORS_MAX1111=yCONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX6650 is not setCONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not setCONFIG_SENSORS_SMSC47M1=yCONFIG_SENSORS_SMSC47M192=yCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not setCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=yCONFIG_SENSORS_W83L785TS=yCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_W83627HF=yCONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_HDAPS is not setCONFIG_SENSORS_APPLESMC=yCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=yCONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not setCONFIG_SC520_WDT=y
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=y
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not setCONFIG_HP_WATCHDOG=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_RDC321X_WDT is not setCONFIG_60XX_WDT=yCONFIG_SBC8360_WDT=yCONFIG_SBC7240_WDT=yCONFIG_CPU5_WDT=yCONFIG_SMSC37B787_WDT=yCONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not setCONFIG_W83697UG_WDT=y
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not setCONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=yCONFIG_WDTPCI=yCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=y
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=yCONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_DEBUG=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not setCONFIG_HTC_PASIC3=y
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_COMMON=yCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not setCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_MEDIA_TUNER=yCONFIG_MEDIA_TUNER_CUSTOMIZE=yCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_MT20XX is not setCONFIG_MEDIA_TUNER_MT2060=yCONFIG_MEDIA_TUNER_MT2266=yCONFIG_MEDIA_TUNER_MT2131=y
# CONFIG_MEDIA_TUNER_QT1010 is not setCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not setCONFIG_VIDEO_V4L2=yCONFIG_VIDEO_V4L1=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not setCONFIG_DAB=yCONFIG_USB_DABUSB=y
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_ALI=yCONFIG_AGP_ATI=yCONFIG_AGP_AMD=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not setCONFIG_AGP_SIS=yCONFIG_AGP_SWORKS=yCONFIG_AGP_VIA=yCONFIG_AGP_EFFICEON=yCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=yCONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not setCONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not setCONFIG_DRM_SAVAGE=yCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=y
# CONFIG_FB_ARC is not setCONFIG_FB_IMSTT=y
# CONFIG_FB_UVESA is not setCONFIG_FB_EFI=yCONFIG_FB_N411=yCONFIG_FB_HGA=yCONFIG_FB_HGA_ACCEL=yCONFIG_FB_S1D13XXX=yCONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not setCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not setCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not setCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_ATY128=yCONFIG_FB_ATY128_BACKLIGHT=yCONFIG_FB_ATY=yCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=yCONFIG_FB_S3=yCONFIG_FB_SAVAGE=yCONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not setCONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not setCONFIG_FB_NEOMAGIC=yCONFIG_FB_KYRO=yCONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_VOODOO1=yCONFIG_FB_VT8623=yCONFIG_FB_TRIDENT=yCONFIG_FB_TRIDENT_ACCEL=yCONFIG_FB_ARK=yCONFIG_FB_PM3=yCONFIG_FB_CARMINE=yCONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not setCONFIG_FB_METRONOME=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=yCONFIG_LCD_LTV350QV=yCONFIG_LCD_ILI9320=yCONFIG_LCD_TDO24M=yCONFIG_LCD_VGG2432A4=yCONFIG_LCD_PLATFORM=yCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not setCONFIG_BACKLIGHT_MBP_NVIDIA=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not setCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=yCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1760_PCI is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_U132_HCD=yCONFIG_USB_SL811_HCD=yCONFIG_USB_R8A66597_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y # CONFIG_USB_STORAGE_DPCM is not set CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y # CONFIG_USB_STORAGE_SDDR55 is not set CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not setCONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not setCONFIG_USB_SERIAL_AIRCABLE=yCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not setCONFIG_USB_SERIAL_DIGI_ACCELEPORT=yCONFIG_USB_SERIAL_CP2101=yCONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=yCONFIG_USB_SERIAL_FUNSOFT=yCONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not setCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=yCONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=yCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_MOS7720 is not setCONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_MOTOROLA is not setCONFIG_USB_SERIAL_NAVMAN=yCONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not setCONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_HP4X is not setCONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not setCONFIG_USB_SERIAL_OPTION=yCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not setCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=yCONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not setCONFIG_USB_BERRY_CHARGE=yCONFIG_USB_LED=yCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=y
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=yCONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not setCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not setCONFIG_USB_TEST=yCONFIG_USB_ISIGHTFW=y
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#CONFIG_LEDS_PCA9532=yCONFIG_LEDS_GPIO=y
# CONFIG_LEDS_CLEVO_MAIL is not setCONFIG_LEDS_PCA955X=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not setCONFIG_INFINIBAND=yCONFIG_INFINIBAND_USER_MAD=yCONFIG_INFINIBAND_USER_ACCESS=yCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=yCONFIG_INFINIBAND_MTHCA_DEBUG=yCONFIG_INFINIBAND_AMSO1100=yCONFIG_INFINIBAND_AMSO1100_DEBUG=yCONFIG_MLX4_INFINIBAND=yCONFIG_INFINIBAND_NES=y
# CONFIG_INFINIBAND_NES_DEBUG is not setCONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not setCONFIG_INFINIBAND_IPOIB_DEBUG=yCONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not setCONFIG_INFINIBAND_ISER=yCONFIG_EDAC=y
#
# Reporting subsystems
#CONFIG_EDAC_DEBUG=yCONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not setCONFIG_EDAC_I82875P=yCONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not setCONFIG_EDAC_I82860=y
# CONFIG_EDAC_R82600 is not setCONFIG_EDAC_I5000=yCONFIG_EDAC_I5100=yCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not setCONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=yCONFIG_RTC_DRV_DS1374=yCONFIG_RTC_DRV_DS1672=yCONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not setCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_S35390A=yCONFIG_RTC_DRV_FM3130=y
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not setCONFIG_RTC_DRV_MAX6902=yCONFIG_RTC_DRV_R9701=yCONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not setCONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not setCONFIG_RTC_DRV_STK17TA8=yCONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
#
# File systems
#
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=yCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not setCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not setCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=yCONFIG_GFS2_FS=y
# CONFIG_GFS2_FS_LOCKING_DLM is not setCONFIG_OCFS2_FS=yCONFIG_OCFS2_FS_O2CB=yCONFIG_OCFS2_FS_STATS=yCONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_COMPAT_JBD is not set
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not setCONFIG_AFFS_FS=yCONFIG_ECRYPT_FS=yCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=yCONFIG_BEFS_FS=yCONFIG_BEFS_DEBUG=yCONFIG_BFS_FS=yCONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not setCONFIG_ROMFS_FS=yCONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
# CONFIG_NFSD is not setCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_SUNRPC_XPRT_RDMA=y
# CONFIG_SUNRPC_REGISTER_V4 is not setCONFIG_RPCSEC_GSS_KRB5=yCONFIG_RPCSEC_GSS_SPKM3=y
# CONFIG_SMB_FS is not setCONFIG_CIFS=yCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=yCONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not setCONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_EXPERIMENTAL=yCONFIG_CIFS_DFS_UPCALL=y
# CONFIG_NCP_FS is not setCONFIG_CODA_FS=yCONFIG_AFS_FS=yCONFIG_AFS_DEBUG=yCONFIG_9P_FS=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not setCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=yCONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not setCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not setCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_SLUB_DEBUG_ON is not setCONFIG_SLUB_STATS=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=yCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not setCONFIG_RCU_TORTURE_TEST=yCONFIG_RCU_TORTURE_TEST_RUNNABLE=yCONFIG_RCU_CPU_STALL_DETECTOR=yCONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not setCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not setCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=yCONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_HAVE_FTRACE=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_TRACER_MAX_TRACE=yCONFIG_TRACING=yCONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_DYNAMIC_FTRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not setCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not setCONFIG_SAMPLES=yCONFIG_SAMPLE_KOBJECT=yCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not setCONFIG_DEBUG_STACK_USAGE=yCONFIG_DEBUG_PAGEALLOC=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not setCONFIG_DOUBLEFAULT=yCONFIG_MMIOTRACE_HOOKS=yCONFIG_MMIOTRACE=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=yCONFIG_CPA_DEBUG=yCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0CONFIG_XOR_BLOCKS=yCONFIG_ASYNC_CORE=yCONFIG_ASYNC_MEMCPY=yCONFIG_ASYNC_XOR=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=y
# CONFIG_CRYPTO_ECB is not setCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not setCONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not setCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=yCONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not setCONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not setCONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not setCONFIG_LGUEST=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not setCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=yCONFIG_X86_32_ALWAYS_ON=y
Linux version 2.6.27-06994-g70740d6-dirty (mingo@aldebaran) (gcc version 4.3.2 20081007 (Red Hat 4.3.2-6) (GCC) ) #37 Mon Jan 19 15:00:55 CET 2009 KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabled
debug: ignoring loglevel setting.
using polling idle threads.
PAT support disabled.
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.last_pfn = 0x3fff0 max_arch_pfn = 0x100000
only 135MB highmem pages available, ignoring highmem size of 512MB.
kernel direct mapping tables up to 377fe000 @ 1a86000-1b68000
ACPI: RSDP 000F6C40, 0014 (r0 IntelR)
ACPI: RSDT 3FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FFF30C0, 3B65 (r1 INTELR AWRDACPI 1000 MSFT 100000D)
ACPI: FACS 3FFF0000, 0040
ACPI: APIC 3FFF6C40, 006C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00010000 - 00016f00
(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 0001a6c770] TEXT DATA BSS ==> [0000100000 - 0001a6c770]
#2 [0001a6d000 - 0001a86000] INIT_PG_TABLE ==> [0001a6d000 - 0001a86000]
#3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#4 [0001a86000 - 0001b4c000] PGTABLE ==> [0001a86000 - 0001b4c000]
#5 [0000010000 - 0000017000] BOOTMAP ==> [0000010000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0On node 0 totalpages: 262015free_area_init_node: node 0, pgdat c1268100, node_mem_map c1b4d200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 272 pages used for memmap
HighMem zone: 34530 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
Kernel command line: root=/dev/sda3 debug earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty0 initcall_debug apic=verbose ignore_loglevel maxcpus=1 nosmp highres=0 lapic idle=mwait idle=poll highmem=512m nopat notsc pci=nomsi
notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
RCU-based detection of stalled CPUs is enabled.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2076.862 MHz processor.
Console: colour VGA+ 80x25
console handover: boot [earlyser0] -> real [tty0]
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 2463 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1011668k/1048512k available (12508k kernel code, 36048k reserved, 5401k data, 628k init, 139208k highmem) virtual kernel memory layout:
fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1280000 - 0xc131d000 ( 628 kB)
.data : 0xc0d3719f - 0xc127d968 (5401 kB)
.text : 0xc0100000 - 0xc0d3719f (12508 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4153.72 BogoMIPS (lpj=8307448)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) XEON(TM) CPU 2.40GHz stepping 04
Checking 'hlt' instruction... OK.
debug: unmapping init memory c1280000..c1280000
ACPI: Core revision 20080609
Parsing all Control Methods:
Table [DSDT](id 0001) - 502 Objects with 45 Devices 139 Methods 29 Regions
tbxface-0596 [02] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 1e20)
evxfevnt-0091 [02] enable : Transition to ACPI mode successful
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 41376 hash entries in 162 pages
calling spawn_ksoftirqd+0x0/0x3b @ 1
initcall spawn_ksoftirqd+0x0/0x3b returned 0 after 0 usecs
calling relay_init+0x0/0x7 @ 1
initcall relay_init+0x0/0x7 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x15a @ 1
initcall tracer_alloc_buffers+0x0/0x15a returned 0 after 3906 usecs
device: 'platform': device_add
PM: Adding info for No Bus:platform
khelper used greatest stack depth: 7220 bytes left
bus: 'platform': registered
Registering sysdev class 'cpu'
calling net_ns_init+0x0/0x17d @ 1net_namespace: 828 bytes
initcall net_ns_init+0x0/0x17d returned 0 after 3906 usecs
calling reboot_init+0x0/0x11 @ 1
initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
calling sysctl_init+0x0/0x13 @ 1
initcall sysctl_init+0x0/0x13 returned 0 after 0 usecs
calling ksysfs_init+0x0/0xa0 @ 1
initcall ksysfs_init+0x0/0xa0 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xf @ 1
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
calling pm_init+0x0/0x36 @ 1
initcall pm_init+0x0/0x36 returned 0 after 0 usecs
calling filelock_init+0x0/0x2f @ 1
initcall filelock_init+0x0/0x2f returned 0 after 0 usecs
calling init_aout_binfmt+0x0/0xf @ 1
initcall init_aout_binfmt+0x0/0xf returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x35 @ 1
initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0xf @ 1
initcall init_script_binfmt+0x0/0xf returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0xf @ 1
initcall init_elf_binfmt+0x0/0xf returned 0 after 0 usecs
calling debugfs_init+0x0/0x4e @ 1
initcall debugfs_init+0x0/0x4e returned 0 after 0 usecs
calling securityfs_init+0x0/0x48 @ 1
initcall securityfs_init+0x0/0x48 returned 0 after 0 usecs
calling calibrate_xor_blocks+0x0/0x18f @ 1
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 2705.000 MB/sec
xor: using function: pIII_sse (2705.000 MB/sec)
initcall calibrate_xor_blocks+0x0/0x18f returned 0 after 27343 usecs
calling random32_init+0x0/0x9c @ 1
initcall random32_init+0x0/0x9c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x19 @ 1
initcall cpuidle_init+0x0/0x19 returned 0 after 0 usecs
calling sock_init+0x0/0x60 @ 1
initcall sock_init+0x0/0x60 returned 0 after 0 usecs
calling netpoll_init+0x0/0x39 @ 1
initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x11b @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x11b returned 0 after 3906 usecs
calling olpc_init+0x0/0x121 @ 1
initcall olpc_init+0x0/0x121 returned 0 after 0 usecs
calling bdi_class_init+0x0/0x35 @ 1
device class 'bdi': registering
initcall bdi_class_init+0x0/0x35 returned 0 after 3906 usecs
calling kobject_uevent_init+0x0/0x53 @ 1
initcall kobject_uevent_init+0x0/0x53 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x14 @ 1
device class 'pci_bus': registering
initcall pcibus_class_init+0x0/0x14 returned 0 after 3906 usecs
calling pci_driver_init+0x0/0x17 @ 1
bus: 'pci': registered
initcall pci_driver_init+0x0/0x17 returned 0 after 0 usecs
calling lcd_class_init+0x0/0x45 @ 1
device class 'lcd': registering
initcall lcd_class_init+0x0/0x45 returned 0 after 3906 usecs
calling backlight_class_init+0x0/0x4f @ 1
device class 'backlight': registering
initcall backlight_class_init+0x0/0x4f returned 0 after 3906 usecs
calling video_output_class_init+0x0/0x14 @ 1
device class 'video_output': registering
initcall video_output_class_init+0x0/0x14 returned 0 after 3906 usecs
calling dock_init+0x0/0x53 @ 1
No dock devices found.
initcall dock_init+0x0/0x53 returned 0 after 3906 usecs
calling tty_class_init+0x0/0x28 @ 1
device class 'tty': registering
initcall tty_class_init+0x0/0x28 returned 0 after 3906 usecs
calling vtconsole_class_init+0x0/0xcd @ 1
device class 'vtconsole': registering
device: 'vtcon0': device_add
PM: Adding info for No Bus:vtcon0
initcall vtconsole_class_init+0x0/0xcd returned 0 after 11718 usecs
calling spi_init+0x0/0x6d @ 1
bus: 'spi': registered
device class 'spi_master': registering
initcall spi_init+0x0/0x6d returned 0 after 7812 usecs
calling i2c_init+0x0/0x56 @ 1
bus: 'i2c': registered
device class 'i2c-adapter': registering
bus: 'i2c': add driver dummy
i2c-core: driver [dummy] registered
initcall i2c_init+0x0/0x56 returned 0 after 15625 usecs
calling amd_postcore_init+0x0/0x38 @ 1
initcall amd_postcore_init+0x0/0x38 returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x2c0 @ 1
initcall arch_kdebugfs_init+0x0/0x2c0 returned 0 after 0 usecs
calling init_pit_clocksource+0x0/0x92 @ 1
initcall init_pit_clocksource+0x0/0x92 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x92 @ 1
initcall mtrr_if_init+0x0/0x92 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2d @ 1
initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
calling kdump_buf_page_init+0x0/0x3e @ 1
initcall kdump_buf_page_init+0x0/0x3e returned 0 after 0 usecs
calling acpi_pci_init+0x0/0x5d @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5d returned 0 after 3906 usecs
calling init_acpi_device_notify+0x0/0x43 @ 1
initcall init_acpi_device_notify+0x0/0x43 returned 0 after 0 usecs
calling dmi_id_init+0x0/0x299 @ 1
device class 'dmi': registering
device: 'id': device_add
PM: Adding info for No Bus:id
initcall dmi_id_init+0x0/0x299 returned 0 after 11718 usecs
calling pci_arch_init+0x0/0x70 @ 1
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=4
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x70 returned 0 after 11718 usecs
calling topology_init+0x0/0x1f @ 1
Registering sys device of class 'cpu'
Registering sys device 'cpu0'
initcall topology_init+0x0/0x1f returned 0 after 7812 usecs
calling mtrr_init_finialize+0x0/0x36 @ 1
initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs
calling mca_init+0x0/0x2d1 @ 1
bus: 'MCA': registered
initcall mca_init+0x0/0x2d1 returned -19 after 3906 usecs
calling param_sysfs_init+0x0/0x2f2 @ 1
khelper used greatest stack depth: 6936 bytes left
initcall param_sysfs_init+0x0/0x2f2 returned 0 after 62500 usecs
calling pm_sysrq_init+0x0/0x20 @ 1
initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
calling readahead_init+0x0/0x3b @ 1
device: 'default': device_add
PM: Adding info for No Bus:default
initcall readahead_init+0x0/0x3b returned 0 after 7812 usecs
calling init_bio+0x0/0xbf @ 1
initcall init_bio+0x0/0xbf returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x32 @ 1
initcall cryptomgr_init+0x0/0x32 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x21 @ 1
initcall blk_settings_init+0x0/0x21 returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2f @ 1
initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x2f @ 1
initcall blk_softirq_init+0x0/0x2f returned 0 after 0 usecs
calling genhd_device_init+0x0/0x41 @ 1
device class 'block': registering
initcall genhd_device_init+0x0/0x41 returned 0 after 3906 usecs
calling gpiolib_debugfs_init+0x0/0x2a @ 1
initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling max7301_init+0x0/0xf @ 1
bus: 'spi': add driver max7301
initcall max7301_init+0x0/0xf returned 0 after 3906 usecs
calling mcp23s08_init+0x0/0xf @ 1
bus: 'spi': add driver mcp23s08
initcall mcp23s08_init+0x0/0xf returned 0 after 3906 usecs
calling pca953x_init+0x0/0x11 @ 1
bus: 'i2c': add driver pca953x
i2c-core: driver [pca953x] registered
initcall pca953x_init+0x0/0x11 returned 0 after 7812 usecs
calling pcf857x_init+0x0/0x1a @ 1
bus: 'i2c': add driver pcf857x
i2c-core: driver [pcf857x] registered
initcall pcf857x_init+0x0/0x1a returned 0 after 7812 usecs
calling pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling fbmem_init+0x0/0x8e @ 1
device class 'graphics': registering
initcall fbmem_init+0x0/0x8e returned 0 after 3906 usecs
calling acpi_init+0x0/0x21f @ 1
evgpeblk-0957 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-0957 [04] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:..................................................................................... Initialized 25/29 Regions 25/25 Fields 21/21 Buffers 14/14 Packages (511 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 1 _STA executions (examined 52 objects)
evgpeblk-1054 [03] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1054 [03] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 Runtime GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using PIC for interrupt routing
initcall acpi_init+0x0/0x21f returned 0 after 97656 usecs
calling acpi_scan_init+0x0/0xed @ 1
bus: 'acpi': registered
device: 'LNXSYSTM:00': device_add
bus: 'acpi': add device LNXSYSTM:00
PM: Adding info for acpi:LNXSYSTM:00
device: 'LNXPWRBN:00': device_add
bus: 'acpi': add device LNXPWRBN:00
PM: Adding info for acpi:LNXPWRBN:00
device: 'ACPI0007:00': device_add
bus: 'acpi': add device ACPI0007:00
PM: Adding info for acpi:ACPI0007:00
device: 'ACPI0007:01': device_add
bus: 'acpi': add device ACPI0007:01
PM: Adding info for acpi:ACPI0007:01
device: 'ACPI0007:02': device_add
bus: 'acpi': add device ACPI0007:02
PM: Adding info for acpi:ACPI0007:02
device: 'ACPI0007:03': device_add
bus: 'acpi': add device ACPI0007:03
PM: Adding info for acpi:ACPI0007:03
device: 'device:00': device_add
bus: 'acpi': add device device:00
PM: Adding info for acpi:device:00
device: 'device:00': dev_uevent: bus uevent() returned -12
device: 'PNP0C0C:00': device_add
bus: 'acpi': add device PNP0C0C:00
PM: Adding info for acpi:PNP0C0C:00
device: 'PNP0C01:00': device_add
bus: 'acpi': add device PNP0C01:00
PM: Adding info for acpi:PNP0C01:00
device: 'INT0800:00': device_add
bus: 'acpi': add device INT0800:00
PM: Adding info for acpi:INT0800:00
device: 'PNP0A03:00': device_add
bus: 'acpi': add device PNP0A03:00
PM: Adding info for acpi:PNP0A03:00
device: 'device:01': device_add
bus: 'acpi': add device device:01
PM: Adding info for acpi:device:01
device: 'device:01': dev_uevent: bus uevent() returned -12
device: 'device:02': device_add
bus: 'acpi': add device device:02
PM: Adding info for acpi:device:02
device: 'device:02': dev_uevent: bus uevent() returned -12
device: 'device:03': device_add
bus: 'acpi': add device device:03
PM: Adding info for acpi:device:03
device: 'device:03': dev_uevent: bus uevent() returned -12
device: 'device:04': device_add
bus: 'acpi': add device device:04
PM: Adding info for acpi:device:04
device: 'device:04': dev_uevent: bus uevent() returned -12
device: 'device:05': device_add
bus: 'acpi': add device device:05
PM: Adding info for acpi:device:05
device: 'device:05': dev_uevent: bus uevent() returned -12
device: 'device:06': device_add
bus: 'acpi': add device device:06
PM: Adding info for acpi:device:06
device: 'device:06': dev_uevent: bus uevent() returned -12
device: 'device:07': device_add
bus: 'acpi': add device device:07
PM: Adding info for acpi:device:07
device: 'device:07': dev_uevent: bus uevent() returned -12
device: 'device:08': device_add
bus: 'acpi': add device device:08
PM: Adding info for acpi:device:08
device: 'device:08': dev_uevent: bus uevent() returned -12
device: 'device:09': device_add
bus: 'acpi': add device device:09
PM: Adding info for acpi:device:09
device: 'device:09': dev_uevent: bus uevent() returned -12
device: 'device:0a': device_add
bus: 'acpi': add device device:0a
PM: Adding info for acpi:device:0a
device: 'device:0a': dev_uevent: bus uevent() returned -12
device: 'device:0b': device_add
bus: 'acpi': add device device:0b
PM: Adding info for acpi:device:0b
device: 'device:0b': dev_uevent: bus uevent() returned -12
device: 'device:0c': device_add
bus: 'acpi': add device device:0c
PM: Adding info for acpi:device:0c
device: 'device:0c': dev_uevent: bus uevent() returned -12
device: 'device:0d': device_add
bus: 'acpi': add device device:0d
PM: Adding info for acpi:device:0d
device: 'device:0d': dev_uevent: bus uevent() returned -12
device: 'device:0e': device_add
bus: 'acpi': add device device:0e
PM: Adding info for acpi:device:0e
device: 'device:0e': dev_uevent: bus uevent() returned -12
device: 'device:0f': device_add
bus: 'acpi': add device device:0f
PM: Adding info for acpi:device:0f
device: 'device:0f': dev_uevent: bus uevent() returned -12
device: 'PNP0C02:00': device_add
bus: 'acpi': add device PNP0C02:00
PM: Adding info for acpi:PNP0C02:00
device: 'PNP0C0F:00': device_add
bus: 'acpi': add device PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:00
device: 'PNP0C0F:01': device_add
bus: 'acpi': add device PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:01
device: 'PNP0C0F:02': device_add
bus: 'acpi': add device PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:02
device: 'PNP0C0F:03': device_add
bus: 'acpi': add device PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:03
device: 'PNP0C0F:04': device_add
bus: 'acpi': add device PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:04
device: 'PNP0C0F:05': device_add
bus: 'acpi': add device PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:05
device: 'PNP0C0F:06': device_add
bus: 'acpi': add device PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:06
device: 'PNP0C0F:07': device_add
bus: 'acpi': add device PNP0C0F:07
PM: Adding info for acpi:PNP0C0F:07
device: 'PNP0C02:01': device_add
bus: 'acpi': add device PNP0C02:01
PM: Adding info for acpi:PNP0C02:01
device: 'PNP0000:00': device_add
bus: 'acpi': add device PNP0000:00
PM: Adding info for acpi:PNP0000:00
device: 'PNP0200:00': device_add
bus: 'acpi': add device PNP0200:00
PM: Adding info for acpi:PNP0200:00
device: 'PNP0100:00': device_add
bus: 'acpi': add device PNP0100:00
PM: Adding info for acpi:PNP0100:00
device: 'PNP0B00:00': device_add
bus: 'acpi': add device PNP0B00:00
PM: Adding info for acpi:PNP0B00:00
device: 'PNP0800:00': device_add
bus: 'acpi': add device PNP0800:00
PM: Adding info for acpi:PNP0800:00
device: 'PNP0C04:00': device_add
bus: 'acpi': add device PNP0C04:00
PM: Adding info for acpi:PNP0C04:00
device: 'PNP0700:00': device_add
bus: 'acpi': add device PNP0700:00
PM: Adding info for acpi:PNP0700:00
device: 'PNP0501:00': device_add
bus: 'acpi': add device PNP0501:00
PM: Adding info for acpi:PNP0501:00
device: 'PNP0501:01': device_add
bus: 'acpi': add device PNP0501:01
PM: Adding info for acpi:PNP0501:01
device: 'PNP0401:00': device_add
bus: 'acpi': add device PNP0401:00
PM: Adding info for acpi:PNP0401:00
device: 'PNP0303:00': device_add
bus: 'acpi': add device PNP0303:00
PM: Adding info for acpi:PNP0303:00
device: 'LNXTHERM:00': device_add
bus: 'acpi': add device LNXTHERM:00
PM: Adding info for acpi:LNXTHERM:00
device: 'PNP0C0B:00': device_add
bus: 'acpi': add device PNP0C0B:00
PM: Adding info for acpi:PNP0C0B:00
device: 'LNXTHERM:01': device_add
bus: 'acpi': add device LNXTHERM:01
PM: Adding info for acpi:LNXTHERM:01
initcall acpi_scan_init+0x0/0xed returned 0 after 625001 usecs
calling acpi_ec_init+0x0/0x55 @ 1
bus: 'acpi': add driver ec
initcall acpi_ec_init+0x0/0x55 returned 0 after 3906 usecs
calling acpi_pci_root_init+0x0/0x25 @ 1
bus: 'acpi': add driver pci_root
bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
ACPI: PCI Root Bridge [PCI0] (0000:00)
device: 'pci0000:00': device_add
PM: Adding info for No Bus:pci0000:00
device: '0000:00': device_add
PM: Adding info for No Bus:0000:00
pci 0000:00:00.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff]
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:1f.2: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x50f]
pci 0000:00:1f.4: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1f.5: reg 10 io port: [0xdc00-0xdcff]
pci 0000:00:1f.5: reg 14 io port: [0xe000-0xe03f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xdd000000-0xdd00ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xddffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
pci 0000:00:02.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:02.0: bridge 32bit mmio: [0xde000000-0xdfffffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xdf001000-0xdf001fff]
pci 0000:03:04.0: reg 10 io port: [0xb000-0xb0ff]
pci 0000:03:04.0: reg 14 64bit mmio: [0xdf000000-0xdf000fff]
pci 0000:03:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:03:04.1: reg 10 io port: [0xb400-0xb4ff]
pci 0000:03:04.1: reg 14 64bit mmio: [0xdf002000-0xdf002fff]
pci 0000:03:04.1: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:1f.0: bridge io port: [0xb000-0xbfff]
pci 0000:02:1f.0: bridge 32bit mmio: [0xde000000-0xdfffffff]
pci 0000:04:03.0: reg 10 32bit mmio: [0xe1241000-0xe1241fff]
pci 0000:04:03.0: reg 14 io port: [0xc000-0xc03f]
pci 0000:04:03.0: reg 18 32bit mmio: [0xe1000000-0xe10fffff]
pci 0000:04:03.0: reg 30 32bit mmio: [0x000000-0x0fffff]
pci 0000:04:03.0: supports D1 D2
pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:03.0: PME# disabled
pci 0000:04:04.0: reg 10 32bit mmio: [0xe1240000-0xe1240fff]
pci 0000:04:04.0: reg 14 io port: [0xc400-0xc43f]
pci 0000:04:04.0: reg 18 32bit mmio: [0xe1100000-0xe11fffff]
pci 0000:04:04.0: reg 30 32bit mmio: [0x000000-0x0fffff]
pci 0000:04:04.0: supports D1 D2
pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:04.0: PME# disabled
pci 0000:04:07.0: reg 10 32bit mmio: [0xe1200000-0xe121ffff]
pci 0000:04:07.0: reg 14 32bit mmio: [0xe1220000-0xe123ffff]
pci 0000:04:07.0: reg 18 io port: [0xc800-0xc81f]
pci 0000:04:07.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:07.0: PME# supported from D0 D3hot D3cold
pci 0000:04:07.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUBA.HUBB._PRT]
ACPI Error (uteval-0289): Return object type is incorrect [\_SB_.PCI0.HUBA.HUBB._PRT] (Node f700ff00), AE_TYPE
ACPI Error (uteval-0295): Type returned from _PRT was incorrect: Integer, expected Btypes: 8 [20080609]
ACPI Exception (pci_irq-0290): AE_TYPE, Evaluating _PRT [AE_TYPE] [20080609]
device: '0000:00:00.0': device_add
bus: 'pci': add device 0000:00:00.0
PM: Adding info for pci:0000:00:00.0
device: '0000:00:01.0': device_add
bus: 'pci': add device 0000:00:01.0
PM: Adding info for pci:0000:00:01.0
device: '0000:00:02.0': device_add
bus: 'pci': add device 0000:00:02.0
PM: Adding info for pci:0000:00:02.0
device: '0000:00:1e.0': device_add
bus: 'pci': add device 0000:00:1e.0
PM: Adding info for pci:0000:00:1e.0
device: '0000:00:1f.0': device_add
bus: 'pci': add device 0000:00:1f.0
PM: Adding info for pci:0000:00:1f.0
device: '0000:00:1f.1': device_add
bus: 'pci': add device 0000:00:1f.1
PM: Adding info for pci:0000:00:1f.1
device: '0000:00:1f.2': device_add
bus: 'pci': add device 0000:00:1f.2
PM: Adding info for pci:0000:00:1f.2
device: '0000:00:1f.3': device_add
bus: 'pci': add device 0000:00:1f.3
PM: Adding info for pci:0000:00:1f.3
device: '0000:00:1f.4': device_add
bus: 'pci': add device 0000:00:1f.4
PM: Adding info for pci:0000:00:1f.4
device: '0000:00:1f.5': device_add
bus: 'pci': add device 0000:00:1f.5
PM: Adding info for pci:0000:00:1f.5
device: '0000:01:00.0': device_add
bus: 'pci': add device 0000:01:00.0
PM: Adding info for pci:0000:01:00.0
device: '0000:01': device_add
PM: Adding info for No Bus:0000:01
device: '0000:02:1f.0': device_add
bus: 'pci': add device 0000:02:1f.0
PM: Adding info for pci:0000:02:1f.0
device: '0000:03:00.0': device_add
bus: 'pci': add device 0000:03:00.0
PM: Adding info for pci:0000:03:00.0
device: '0000:03:04.0': device_add
bus: 'pci': add device 0000:03:04.0
PM: Adding info for pci:0000:03:04.0
khelper used greatest stack depth: 6932 bytes left
device: '0000:03:04.1': device_add
bus: 'pci': add device 0000:03:04.1
PM: Adding info for pci:0000:03:04.1
device: '0000:03': device_add
PM: Adding info for No Bus:0000:03
device: '0000:02': device_add
PM: Adding info for No Bus:0000:02
device: '0000:04:03.0': device_add
bus: 'pci': add device 0000:04:03.0
PM: Adding info for pci:0000:04:03.0
device: '0000:04:04.0': device_add
bus: 'pci': add device 0000:04:04.0
PM: Adding info for pci:0000:04:04.0
device: '0000:04:07.0': device_add
bus: 'pci': add device 0000:04:07.0
PM: Adding info for pci:0000:04:07.0
device: '0000:04': device_add
PM: Adding info for No Bus:0000:04
driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
initcall acpi_pci_root_init+0x0/0x25 returned 0 after 558595 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
bus: 'acpi': add driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link
bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link
bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link'
bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 191406 usecs
calling acpi_power_init+0x0/0x69 @ 1
bus: 'acpi': add driver power
initcall acpi_power_init+0x0/0x69 returned 0 after 3906 usecs
calling acpi_system_init+0x0/0x15e @ 1
initcall acpi_system_init+0x0/0x15e returned 0 after 3906 usecs
calling acpi_wmi_init+0x0/0x44 @ 1
bus: 'acpi': add driver wmi
ACPI: WMI: Mapper loaded
initcall acpi_wmi_init+0x0/0x44 returned 0 after 7812 usecs
calling pnp_init+0x0/0xf @ 1
bus: 'pnp': registered
initcall pnp_init+0x0/0xf returned 0 after 3906 usecs
calling misc_init+0x0/0x96 @ 1
device class 'misc': registering
initcall misc_init+0x0/0x96 returned 0 after 3906 usecs
calling cn_init+0x0/0xe6 @ 1
initcall cn_init+0x0/0xe6 returned 0 after 0 usecs
calling tifm_init+0x0/0x8d @ 1
bus: 'tifm': registered
device class 'tifm_adapter': registering
initcall tifm_init+0x0/0x8d returned 0 after 7812 usecs
calling phy_init+0x0/0x32 @ 1
device class 'mdio_bus': registering
bus: 'mdio_bus': registered
bus: 'mdio_bus': add driver Generic PHY
initcall phy_init+0x0/0x32 returned 0 after 11718 usecs
calling init_scsi+0x0/0xa1 @ 1
device class 'scsi_host': registering
bus: 'scsi': registered
device class 'scsi_device': registering
SCSI subsystem initialized
initcall init_scsi+0x0/0xa1 returned 0 after 11718 usecs
calling ata_init+0x0/0x328 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x328 returned 0 after 3906 usecs
calling usb_init+0x0/0x127 @ 1
bus: 'usb': registered
device class 'usb_host': registering
bus: 'usb': add driver usbfs
usbcore: registered new interface driver usbfs
device class 'usb_device': registering
bus: 'usb': add driver hub
usbcore: registered new interface driver hub
bus: 'usb': add driver usb
usbcore: registered new device driver usb
initcall usb_init+0x0/0x127 returned 0 after 31250 usecs
calling serio_init+0x0/0x90 @ 1
bus: 'serio': registered
initcall serio_init+0x0/0x90 returned 0 after 3906 usecs
calling gameport_init+0x0/0x8a @ 1
bus: 'gameport': registered
initcall gameport_init+0x0/0x8a returned 0 after 0 usecs
calling input_init+0x0/0x102 @ 1
device class 'input': registering
initcall input_init+0x0/0x102 returned 0 after 3906 usecs
calling rtc_init+0x0/0x5f @ 1
device class 'rtc': registering
initcall rtc_init+0x0/0x5f returned 0 after 3906 usecs
calling tps_init+0x0/0x82 @ 1
tps65010: version 2 May 2005
bus: 'i2c': add driver tps65010
i2c-core: driver [tps65010] registered
bus: 'i2c': remove driver tps65010
driver: 'tps65010': driver_release
i2c-core: driver [tps65010] unregistered
bus: 'i2c': add driver tps65010
i2c-core: driver [tps65010] registered
bus: 'i2c': remove driver tps65010
driver: 'tps65010': driver_release
i2c-core: driver [tps65010] unregistered
bus: 'i2c': add driver tps65010
i2c-core: driver [tps65010] registered
bus: 'i2c': remove driver tps65010
driver: 'tps65010': driver_release
i2c-core: driver [tps65010] unregistered
tps65010: no chip?
initcall tps_init+0x0/0x82 returned -19 after 89843 usecs
calling power_supply_class_init+0x0/0x2f @ 1
device class 'power_supply': registering
initcall power_supply_class_init+0x0/0x2f returned 0 after 3906 usecs
calling hwmon_init+0x0/0x40 @ 1
device class 'hwmon': registering
initcall hwmon_init+0x0/0x40 returned 0 after 3906 usecs
calling thermal_init+0x0/0x54 @ 1
device class 'thermal': registering
initcall thermal_init+0x0/0x54 returned 0 after 3906 usecs
calling md_init+0x0/0xf4 @ 1
initcall md_init+0x0/0xf4 returned 0 after 0 usecs
calling leds_init+0x0/0x28 @ 1
device class 'leds': registering
initcall leds_init+0x0/0x28 returned 0 after 3906 usecs
calling pci_subsys_init+0x0/0x110 @ 1
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x110 returned 0 after 3906 usecs
calling proto_init+0x0/0x2b @ 1
initcall proto_init+0x0/0x2b returned 0 after 0 usecs
calling net_dev_init+0x0/0x114 @ 1
device class 'net': registering
initcall net_dev_init+0x0/0x114 returned 0 after 3906 usecs
calling neigh_init+0x0/0x7c @ 1
initcall neigh_init+0x0/0x7c returned 0 after 0 usecs
calling fib_rules_init+0x0/0xaf @ 1
initcall fib_rules_init+0x0/0xaf returned 0 after 0 usecs
calling pktsched_init+0x0/0xc6 @ 1
initcall pktsched_init+0x0/0xc6 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x52 @ 1
initcall tc_filter_init+0x0/0x52 returned 0 after 0 usecs
calling genl_init+0x0/0xca @ 1
initcall genl_init+0x0/0xca returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x77 @ 1
initcall cipso_v4_init+0x0/0x77 returned 0 after 0 usecs
calling irda_init+0x0/0xa2 @ 1
NET: Registered protocol family 23
initcall irda_init+0x0/0xa2 returned 0 after 3906 usecs
calling bt_init+0x0/0x58 @ 1
Bluetooth: Core ver 2.13
device class 'bluetooth': registering
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x58 returned 0 after 19531 usecs
calling atm_init+0x0/0xaf @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
device class 'atm': registering
initcall atm_init+0x0/0xaf returned 0 after 7812 usecs
calling netlbl_init+0x0/0x8a @ 1
NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x8a returned 0 after 11718 usecs
calling rfkill_init+0x0/0x6a @ 1
device class 'rfkill': registering
initcall rfkill_init+0x0/0x6a returned 0 after 3906 usecs
calling sysctl_init+0x0/0x47 @ 1
initcall sysctl_init+0x0/0x47 returned 0 after 0 usecs
calling pci_iommu_init+0x0/0x13 @ 1
initcall pci_iommu_init+0x0/0x13 returned 0 after 0 usecs
calling hpet_late_init+0x0/0xf3 @ 1
initcall hpet_late_init+0x0/0xf3 returned -19 after 0 usecs
calling init_kmmio+0x0/0x25 @ 1
initcall init_kmmio+0x0/0x25 returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x11 @ 1
initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs
calling ftrace_init_debugfs+0x0/0x135 @ 1
initcall ftrace_init_debugfs+0x0/0x135 returned 0 after 116 usecs
calling tracer_init_debugfs+0x0/0x37c @ 1
initcall tracer_init_debugfs+0x0/0x37c returned 0 after 174 usecs
calling init_pipe_fs+0x0/0x3f @ 1
initcall init_pipe_fs+0x0/0x3f returned 0 after 109 usecs
calling init_mnt_writers+0x0/0x43 @ 1
initcall init_mnt_writers+0x0/0x43 returned 0 after 9 usecs
calling eventpoll_init+0x0/0x90 @ 1
initcall eventpoll_init+0x0/0x90 returned 0 after 18 usecs
calling anon_inode_init+0x0/0xeb @ 1
initcall anon_inode_init+0x0/0xeb returned 0 after 78 usecs
calling pcie_aspm_init+0x0/0x1f @ 1
initcall pcie_aspm_init+0x0/0x1f returned 0 after 4141 usecs
calling acpi_event_init+0x0/0x6f @ 1
initcall acpi_event_init+0x0/0x6f returned 0 after 215 usecs
calling pnpacpi_init+0x0/0x89 @ 1
pnp: PnP ACPI init
device: 'pnp0': device_add
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
pnp 00:00: mem resource (0xd5800-0xd7fff) overlaps 0000:04:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:04:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:04:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:04:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:04:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe0000-0xeffff) overlaps 0000:04:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd5800-0xd7fff) overlaps 0000:04:04.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:04:04.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:04:04.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:04:04.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:04:04.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe0000-0xeffff) overlaps 0000:04:04.0 BAR 6 (0x0-0xfffff), disabling
device: '00:00': device_add
bus: 'pnp': add device 00:00
PM: Adding info for pnp:00:00
device: '00:01': device_add
bus: 'pnp': add device 00:01
PM: Adding info for pnp:00:01
device: '00:02': device_add
bus: 'pnp': add device 00:02
PM: Adding info for pnp:00:02
device: '00:03': device_add
bus: 'pnp': add device 00:03
PM: Adding info for pnp:00:03
device: '00:04': device_add
bus: 'pnp': add device 00:04
PM: Adding info for pnp:00:04
device: '00:05': device_add
bus: 'pnp': add device 00:05
PM: Adding info for pnp:00:05
device: '00:06': device_add
bus: 'pnp': add device 00:06
PM: Adding info for pnp:00:06
device: '00:07': device_add
bus: 'pnp': add device 00:07
PM: Adding info for pnp:00:07
device: '00:08': device_add
bus: 'pnp': add device 00:08
PM: Adding info for pnp:00:08
device: '00:09': device_add
bus: 'pnp': add device 00:09
PM: Adding info for pnp:00:09
device: '00:0a': device_add
bus: 'pnp': add device 00:0a
PM: Adding info for pnp:00:0a
device: '00:0b': device_add
bus: 'pnp': add device 00:0b
PM: Adding info for pnp:00:0b
device: '00:0c': device_add
bus: 'pnp': add device 00:0c
PM: Adding info for pnp:00:0c
device: '00:0d': device_add
bus: 'pnp': add device 00:0d
PM: Adding info for pnp:00:0d
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x89 returned 0 after 210593 usecs
calling pnp_system_init+0x0/0x13 @ 1
bus: 'pnp': add driver system
bus: 'pnp': driver_probe_device: matched device 00:00 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:00
system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:00: iomem range 0xffb00000-0xffb7ffff could not be reserved
system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
driver: '00:00': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:00 to driver system
bus: 'pnp': driver_probe_device: matched device 00:03 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:03
system 00:03: ioport range 0x400-0x4bf could not be reserved
driver: '00:03': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:03 to driver system
bus: 'pnp': driver_probe_device: matched device 00:04 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:04
system 00:04: ioport range 0xb78-0xb7b has been reserved
system 00:04: ioport range 0xf78-0xf7b has been reserved
system 00:04: ioport range 0xa78-0xa7b has been reserved
system 00:04: ioport range 0xe78-0xe7b has been reserved
system 00:04: ioport range 0xbbc-0xbbf has been reserved
system 00:04: ioport range 0xfbc-0xfbf has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x294-0x297 has been reserved
driver: '00:04': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:04 to driver system
initcall pnp_system_init+0x0/0x13 returned 0 after 109205 usecs
calling chr_dev_init+0x0/0xa6 @ 1
device class 'mem': registering
device: 'mem': device_add
PM: Adding info for No Bus:mem
device: 'kmem': device_add
PM: Adding info for No Bus:kmem
device: 'null': device_add
PM: Adding info for No Bus:null
device: 'port': device_add
PM: Adding info for No Bus:port
device: 'zero': device_add
PM: Adding info for No Bus:zero
device: 'full': device_add
PM: Adding info for No Bus:full
device: 'random': device_add
PM: Adding info for No Bus:random
device: 'urandom': device_add
PM: Adding info for No Bus:urandom
device: 'kmsg': device_add
PM: Adding info for No Bus:kmsg
device: 'oldmem': device_add
PM: Adding info for No Bus:oldmem
initcall chr_dev_init+0x0/0xa6 returned 0 after 68248 usecs
calling firmware_class_init+0x0/0x77 @ 1
device class 'firmware': registering
initcall firmware_class_init+0x0/0x77 returned 0 after 3969 usecs
calling loopback_init+0x0/0xf @ 1
device: 'lo': device_add
PM: Adding info for No Bus:lo
initcall loopback_init+0x0/0xf returned 0 after 6360 usecs
calling init_acpi_pm_clocksource+0x0/0x210 @ 1
PM-Timer running at invalid rate: 87% of normal - aborting.
initcall init_acpi_pm_clocksource+0x0/0x210 returned -19 after 44189 usecs calling ssb_modinit+0x0/0x70 @ 1
bus: 'ssb': registered
initcall ssb_modinit+0x0/0x70 returned 0 after 2655 usecs
calling pcibios_assign_resources+0x0/0x7d @ 1
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xa000-0xafff pci 0000:00:01.0: MEM window: 0xdc000000-0xddffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff pci 0000:02:1f.0: PCI bridge, secondary bus 0000:03 pci 0000:02:1f.0: IO window: 0xb000-0xbfff pci 0000:02:1f.0: MEM window: 0xde000000-0xdfffffff pci 0000:02:1f.0: PREFETCH window: 0x00000050000000-0x000000500fffff pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: 0xb000-0xbfff pci 0000:00:02.0: MEM window: 0xde000000-0xdfffffff pci 0000:00:02.0: PREFETCH window: 0x00000050000000-0x000000500fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0xc000-0xcfff pci 0000:00:1e.0: MEM window: 0xe0000000-0xe1ffffff pci 0000:00:1e.0: PREFETCH window: 0x00000050100000-0x000000503fffff
pci 0000:02:1f.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xa000-0xafff]
bus: 01 index 1 mmio: [0xdc000000-0xddffffff]
bus: 01 index 2 mmio: [0xd0000000-0xd7ffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xb000-0xbfff]
bus: 02 index 1 mmio: [0xde000000-0xdfffffff]
bus: 02 index 2 mmio: [0x50000000-0x500fffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xde000000-0xdfffffff]
bus: 03 index 2 mmio: [0x50000000-0x500fffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xc000-0xcfff]
bus: 04 index 1 mmio: [0xe0000000-0xe1ffffff]
bus: 04 index 2 mmio: [0x50100000-0x503fffff]
bus: 04 index 3 io port: [0x00-0xffff]
bus: 04 index 4 mmio: [0x000000-0xffffffff]
initcall pcibios_assign_resources+0x0/0x7d returned 0 after 138450 usecs calling inet_init+0x0/0x282 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x282 returned 0 after 28502 usecs
calling af_unix_init+0x0/0x5d @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x5d returned 0 after 3580 usecs
calling default_rootfs+0x0/0x75 @ 1
initcall default_rootfs+0x0/0x75 returned 0 after 157 usecs
calling i8259A_init_sysfs+0x0/0x21 @ 1
Registering sysdev class 'i8259'
Registering sys device of class 'i8259'
Registering sys device 'i82590'
initcall i8259A_init_sysfs+0x0/0x21 returned 0 after 11280 usecs calling sbf_init+0x0/0xfe @ 1
initcall sbf_init+0x0/0xfe returned 0 after 10 usecs
calling i8237A_init_sysfs+0x0/0x21 @ 1
Registering sysdev class 'i8237'
Registering sys device of class 'i8237'
Registering sys device 'i82370'
initcall i8237A_init_sysfs+0x0/0x21 returned 0 after 11125 usecs calling add_rtc_cmos+0x0/0xac @ 1
initcall add_rtc_cmos+0x0/0xac returned 0 after 15 usecs
calling cache_sysfs_init+0x0/0x265 @ 1
initcall cache_sysfs_init+0x0/0x265 returned 0 after 10 usecs
calling thermal_throttle_init_device+0x0/0x3c @ 1
initcall thermal_throttle_init_device+0x0/0x3c returned 0 after 9 usecs calling msr_init+0x0/0xce @ 1
device class 'msr': registering
device: 'msr0': device_add
PM: Adding info for No Bus:msr0
initcall msr_init+0x0/0xce returned 0 after 9914 usecs
calling cpuid_init+0x0/0xd7 @ 1
device class 'cpuid': registering
device: 'cpu0': device_add
PM: Adding info for No Bus:cpu0
initcall cpuid_init+0x0/0xd7 returned 0 after 10080 usecs
calling add_pcspkr+0x0/0x2f @ 1
Registering platform device 'pcspkr'. Parent at platform
device: 'pcspkr': device_add
bus: 'platform': add device pcspkr
PM: Adding info for platform:pcspkr
initcall add_pcspkr+0x0/0x2f returned 0 after 12439 usecs
calling microcode_init+0x0/0xfd @ 1
device: 'microcode': device_add
PM: Adding info for No Bus:microcode
Registering platform device 'microcode'. Parent at platform
device: 'microcode': device_add
bus: 'platform': add device microcode
PM: Adding info for platform:microcode
Microcode Update Driver: v2.00 <[email protected]> <[email protected]> initcall microcode_init+0x0/0xfd returned 0 after 29654 usecs
calling start_pageattr_test+0x0/0x60 @ 1
initcall start_pageattr_test+0x0/0x60 returned 0 after 74 usecs calling aes_init+0x0/0xf @ 1
alg: cipher: Test 1 failed on encryption for aes-asm
00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08 cryptomgr_test used greatest stack depth: 6684 bytes left
initcall aes_init+0x0/0xf returned 0 after 17477 usecs
calling init+0x0/0x18 @ 1
initcall init+0x0/0x18 returned 0 after 167 usecs
calling init_sched_debug_procfs+0x0/0x30 @ 1
initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 28 usecs calling ioresources_init+0x0/0x44 @ 1
initcall ioresources_init+0x0/0x44 returned 0 after 21 usecs
calling uid_cache_init+0x0/0x83 @ 1
initcall uid_cache_init+0x0/0x83 returned 0 after 18 usecs
calling init_posix_timers+0x0/0xab @ 1
initcall init_posix_timers+0x0/0xab returned 0 after 15 usecs
calling init_posix_cpu_timers+0x0/0x8d @ 1
initcall init_posix_cpu_timers+0x0/0x8d returned 0 after 9 usecs calling nsproxy_cache_init+0x0/0x36 @ 1
initcall nsproxy_cache_init+0x0/0x36 returned 0 after 11 usecs calling create_proc_profile+0x0/0x60 @ 1
initcall create_proc_profile+0x0/0x60 returned 0 after 9 usecs calling timekeeping_init_device+0x0/0x21 @ 1
Registering sysdev class 'timekeeping'
Registering sys device of class 'timekeeping'
Registering sys device 'timekeeping0'
initcall timekeeping_init_device+0x0/0x21 returned 0 after 12946 usecs calling init_clocksource_sysfs+0x0/0x45 @ 1
Registering sysdev class 'clocksource'
Registering sys device of class 'clocksource'
Registering sys device 'clocksource0'
initcall init_clocksource_sysfs+0x0/0x45 returned 0 after 12914 usecs calling init_timer_list_procfs+0x0/0x30 @ 1
initcall init_timer_list_procfs+0x0/0x30 returned 0 after 19 usecs calling init_tstats_procfs+0x0/0x30 @ 1
initcall init_tstats_procfs+0x0/0x30 returned 0 after 15 usecs calling lockdep_proc_init+0x0/0x8a @ 1
initcall lockdep_proc_init+0x0/0x8a returned 0 after 38 usecs
calling futex_init+0x0/0x93 @ 1
initcall futex_init+0x0/0x93 returned 0 after 48 usecs
calling init_rttest+0x0/0x130 @ 1
Registering sysdev class 'rttest'
Registering sys device of class 'rttest'
Registering sys device 'rttest0'
Registering sys device of class 'rttest'
Registering sys device 'rttest1'
Registering sys device of class 'rttest'
Registering sys device 'rttest2'
Registering sys device of class 'rttest'
Registering sys device 'rttest3'
Registering sys device of class 'rttest'
Registering sys device 'rttest4'
Registering sys device of class 'rttest'
Registering sys device 'rttest5'
Registering sys device of class 'rttest'
Registering sys device 'rttest6'
Registering sys device of class 'rttest'
Registering sys device 'rttest7'
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x130 returned 0 after 69521 usecs
calling proc_dma_init+0x0/0x27 @ 1
initcall proc_dma_init+0x0/0x27 returned 0 after 23 usecs
calling kallsyms_init+0x0/0x2a @ 1
initcall kallsyms_init+0x0/0x2a returned 0 after 16 usecs
calling crash_save_vmcoreinfo_init+0x0/0x4af @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x4af returned 0 after 29 usecs calling crash_notes_memory_init+0x0/0x37 @ 1
initcall crash_notes_memory_init+0x0/0x37 returned 0 after 9 usecs calling backtrace_regression_test+0x0/0xe0 @ 1
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.27-06994-g70740d6-dirty #37
Call Trace: [<c0d33344>] ? printk+0x1d/0x21 [<c0158600>] ? backtrace_regression_test+0x0/0xe0 [<c0158635>] backtrace_regression_test+0x35/0xe0 [<c0142010>] ? ktime_get_ts+0x50/0x60 [<c0158600>] ? backtrace_regression_test+0x0/0xe0 [<c014203e>] ? ktime_get+0x1e/0x40 [<c0158600>] ? backtrace_regression_test+0x0/0xe0 [<c0158600>] ? backtrace_regression_test+0x0/0xe0 [<c010111b>] do_one_initcall+0x2b/0x180 [<c0158600>] ? backtrace_regression_test+0x0/0xe0 [<c014cab5>] ? lock_release_holdtime+0x35/0x1f0 [<c01d3c8e>] ? proc_register+0xee/0x1e0 [<c0d35a02>] ? _spin_unlock+0x22/0x30 [<c01d3c8e>] ? proc_register+0xee/0x1e0 [<c015aca7>] ? register_irq_proc+0x87/0xa0 [<c015acf9>] ? init_irq_proc+0x39/0x50 [<c12804cd>] kernel_init+0x7b/0xd7 [<c1280452>] ? kernel_init+0x0/0xd7 [<c0104b67>] kernel_thread_helper+0x7/0x10 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.27-06994-g70740d6-dirty #37 Call Trace: [<c014db65>] ? trace_hardirqs_on_caller+0x75/0x140 [<c01585ed>] backtrace_test_irq_callback+0xd/0x20 [<c012e65b>] tasklet_action+0x4b/0x90 [<c012ea5f>] __do_softirq+0x6f/0x110 [<c014dc3b>] ? trace_hardirqs_on+0xb/0x10 [<c012eb70>] ? ksoftirqd+0x0/0xc0 [<c012eb65>] do_softirq+0x65/0x70 [<c012ebbd>] ksoftirqd+0x4d/0xc0 [<c013e0ef>] kthread+0x3f/0x70 [<c013e0b0>] ? kthread+0x0/0x70 [<c0104b67>] kernel_thread_helper+0x7/0x10 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [<c010e33f>] save_stack_trace+0x2f/0x50 [<c01586c0>] backtrace_regression_test+0xc0/0xe0 [<c010111b>] do_one_initcall+0x2b/0x180 [<c12804cd>] kernel_init+0x7b/0xd7 [<c0104b67>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff
7,154 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Quoted 2 lines · Ingo Molnar
Here's an SCSI regression i tracked down recently. I'll follow up with more info.
I sent this to James Bottomley about a month ago, who suggested that the bug looks similar to problems caused by:
| commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce | Author: Alan Stern <[email protected]> | Date: Mon Nov 3 15:56:47 2008 -0500 | | [SCSI] simplify scsi_io_completion()
I could not revert that patch because it had a lot of followup dependencies, but by experimentation i figured out the following string of gradual reverts to scsi_lib.c [the revert commits can be found in tip:out-of-tree]:
813104e: Revert "[SCSI] simplify scsi_io_completion()"
84db545: Revert "[SCSI] Fix uninitialized variable error in scsi_io_completion" 0eb6038: Revert "[SCSI] Fix error handling for DIF/DIX"
3cd94dd: Revert "[SCSI] scsi_lib: don't decrement busy counters when inserting commands"
c27aed5: Revert "[SCSI] scsi_lib: fix DID_RESET status problems"
These reverts solved the problem and the box has not locked up in the SCSI irq completion code since then. The code has not had any changes upstream since i did the reverts, so the bug is still relevant as of .29-rc5.
( James suggested i send this bugreport to this list too, so that it does not
get single-threaded on him as he is busy with other things - so more suggestions are welcome. I can try proposed fix patches. James suggested the patch below and i dont think it will show us much more than what we already know: that we are looping in scsi_run_queue(). )
Ingo
drivers/scsi/scsi_lib.c +3 -0
@@ -593,6 +593,7 @@ static void scsi_run_queue(struct request_queue *q)struct Scsi_Host *shost = sdev->host;LIST_HEAD (starved_list);unsigned long flags; +int count =0 ;if (scsi_target (sdev)->single_lun)scsi_single_lun_run (sdev);
@@ -603,6 +604,8 @@ static void scsi_run_queue(struct request_queue *q)while (!list_empty (&starved_list)) {int flagset; +BUG_ON (count++ >1000 ); +/* * As long as shost is accepting commands and we have * starved queues, call blk_run_queue. scsi_request_fn
Quoted 28 lines · Ingo Molnar
Quoted 2 lines · Ingo Molnar
Here's an SCSI regression i tracked down recently. I'll follow up with more info.
I sent this to James Bottomley about a month ago, who suggested that the bug looks similar to problems caused by:
| commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce | Author: Alan Stern <[email protected]> | Date: Mon Nov 3 15:56:47 2008 -0500 | | [SCSI] simplify scsi_io_completion()I could not revert that patch because it had a lot of followup dependencies, but by experimentation i figured out the following string of gradual reverts to
scsi_lib.c[the revert commits can be found in tip:out-of-tree]:813104e: Revert "[SCSI] simplify
scsi_io_completion()"
84db545: Revert "[SCSI] Fix uninitialized variable error inscsi_io_completion" 0eb6038: Revert "[SCSI] Fix error handling for DIF/DIX"
3cd94dd: Revert "[SCSI]scsi_lib: don't decrement busy counters when inserting commands"
c27aed5: Revert "[SCSI]scsi_lib: fixDID_RESETstatus problems"These reverts solved the problem and the box has not locked up in the SCSI irq completion code since then. The code has not had any changes upstream since i did the reverts, so the bug is still relevant as of .29-rc5.
Quoted 5 lines
( James suggested i send this bugreport to this list too, so that it does not
get single-threaded on him as he is busy with other things - so more suggestions are welcome. I can try proposed fix patches. James suggested the patch below and i dont think it will show us much more than what we already know: that we are looping inscsi_run_queue(). )
I have no idea if this will make any difference for the problem you're seeing, but it has been submitted and it's worth trying out. If the problem still occurs, I'll write a diagnostic patch to add log messages giving the destiny of each request in scsi_io_completion().
Alan Stern
This patch (as1144c) removes scsi_end_request(). The routine had only one caller, so it is moved inline and simplified.
In addition, if no forward progress has been made then the patch decrements a request's retry counter before unpreparing and requeuing it, to avoid infinite retry loops.
drivers/scsi/scsi_lib.c +20 -74
@@ -703,71 +703,6 @@ void scsi_run_host_queues(struct Scsi_Hostatic void __scsi_release_buffers (struct scsi_cmnd *,int ); -/* -* Function: scsi_end_request() -* -* Purpose: Post-processing of completed commands (usually invoked at end -* of upper level post-processing and scsi_io_completion). -* -* Arguments: cmd - command that is complete. -* error - 0 if I/O indicates success, < 0 for I/O error. -* bytes - number of bytes of completed I/O -* requeue - indicates whether we should requeue leftovers. -* -* Lock status: Assumed that lock is not held upon entry. -* -* Returns: cmd if requeue required, NULL otherwise. -* -* Notes: This is called for block device requests in order to -* mark some number of sectors as complete. -* -* We are guaranteeing that the request queue will be goosed -* at some point during this call. -* Notes: If cmd was requeued, upon return it will be a stale pointer. -*/ -static struct scsi_cmnd *scsi_end_request (struct scsi_cmnd *cmd,int error, -int bytes,int requeue) -{ -struct request_queue *q = cmd->device->request_queue; -struct request *req = cmd->request; - -/* -* If there are blocks left over at the end, set up the command -* to queue the remainder of them. -*/ -if (blk_end_request (req, error, bytes)) { -int leftover = (req->hard_nr_sectors <<9 ); - -if (blk_pc_request (req)) - leftover = req->data_len; - -/* kill remainder if no retrys */ -if (error &&scsi_noretry_cmd (cmd)) -blk_end_request (req, error, leftover); -else { -if (requeue) { -/* -* Bleah. Leftovers again. Stick the -* leftovers in the front of the -* queue, and goose the queue again. -*/ -scsi_release_buffers (cmd); -scsi_requeue_command (q, cmd); - cmd =NULL ; - } -return cmd; - } - } - -/* -* This will goose the queue request function at the end, so we don't -* need to worry about launching another command. -*/ -__scsi_release_buffers (cmd,0 ); -scsi_next_command (cmd); -return NULL ; -} -static inline unsigned int scsi_sgtable_index (unsigned short nents) {unsigned int index;
@@ -929,7 +864,6 @@ static void scsi_end_bidi_request(structvoid scsi_io_completion (struct scsi_cmnd *cmd,unsigned int good_bytes) {int result = cmd->result; -int this_count;struct request_queue *q = cmd->device->request_queue;struct request *req = cmd->request;int error =0 ;
@@ -980,18 +914,30 @@ void scsi_io_completion(struct scsi_cmndSCSI_LOG_HLCOMPLETE (1 ,printk ("%ld sectors total, " "%d bytes done.\n" , req->nr_sectors, good_bytes)); - -/* A number of bytes were successfully read. If there -* are leftovers and there is some kind of error -* (result != 0), retry the rest. -*/ -if (scsi_end_request (cmd, error, good_bytes, result ==0 ) ==NULL ) +if (blk_end_request (req, error, good_bytes) ==0 ) { +/* This request is completely finished; start the next one */ +scsi_next_command (cmd);return ; - this_count =blk_rq_bytes (req); + } error = -EIO ; -if (host_byte (result) ==DID_RESET ) { +/* The request isn't finished yet. Figure out what to do next. */ +if (result ==0 ) { +/* No error, so carry out the remainder of the request. +* Failure to make forward progress counts against the +* the number of retries. +*/ +if (good_bytes >0 || --req->retries >=0 ) + action =ACTION_REPREP ; +else { + action =ACTION_FAIL ; + description ="Retries exhausted" ; + } + }else if (error &&scsi_noretry_cmd (cmd)) { +/* Retrys are disallowed, so kill the remainder. */ + action =ACTION_FAIL ; + }else if (host_byte (result) ==DID_RESET ) {/* Third party bus reset or reset for error recovery * reasons. Just retry the command and see what * happens.
Quoted 5 lines · Alan Stern
I have no idea if this will make any difference for the problem you're seeing, but it has been submitted and it's worth trying out. If the problem still occurs, I'll write a diagnostic patch to add log messages giving the destiny of each request in
scsi_io_completion().
OK, i've undone the reverts and have applied your fix - it will take a few hours to see whether the hang still occurs.
Ingo
Quoted 12 lines · Ingo Molnar
Quoted 5 lines · Alan Stern
I have no idea if this will make any difference for the problem you're seeing, but it has been submitted and it's worth trying out. If the problem still occurs, I'll write a diagnostic patch to add log messages giving the destiny of each request in
scsi_io_completion().OK, i've undone the reverts and have applied your fix - it will take a few hours to see whether the hang still occurs.
I know already started your testing, but..
I find it informative to set my scsi logging to the value below to display non-zero IO status on commands. The overhead impact is low for good completions.
sysctl -w dev.scsi.logging_level=4100
Note: This does not provide the exact policy that scsi_io_completion will take on the IO, but it provides the input to scsi_io_completion which should help.
-andmike
--
Michael Anderson
[email protected]
Quoted 10 lines · Mike Anderson
Quoted 9 lines · Ingo Molnar
Quoted 5 lines · Alan Stern
I have no idea if this will make any difference for the problem you're seeing, but it has been submitted and it's worth trying out. If the problem still occurs, I'll write a diagnostic patch to add log messages giving the destiny of each request in
scsi_io_completion().
Quoted 4 lines
Quoted 2 lines
OK, i've undone the reverts and have applied your fix - it will take a few hours to see whether the hang still occurs.
I know already started your testing, but..
and that particular box already survived 20 test iterations in the past few hours - while it would hang after 5-10 iterations before. So i think Alan's fix is making a difference. I'll be able to tell for sure tomorrow morning.
Quoted 9 lines
I find it informative to set my scsi logging to the value below to display non-zero IO status on commands. The overhead impact is low for good completions.
sysctl -w dev.scsi.logging_level=4100
Note: This does not provide the exact policy that
scsi_io_completionwill take on the IO, but it provides the input toscsi_io_completionwhich should help.
will do that next time around i have a bug like this. (or if this bug triggers again)
OTOH, the hang took quite a bit of IO to occur. Sometimes the box would be able to build a new kernel and reboot into it, without the hang.
Ingo
Quoted 11 lines · Ingo Molnar
Quoted 5 lines · Alan Stern
I have no idea if this will make any difference for the problem you're seeing, but it has been submitted and it's worth trying out. If the problem still occurs, I'll write a diagnostic patch to add log messages giving the destiny of each request in
scsi_io_completion().OK, i've undone the reverts and have applied your fix - it will take a few hours to see whether the hang still occurs.
Any definitive results yet?
It turns out that the patch I posted earlier is not quite correct; the "__scsi_release_buffers(cmd, 0);" line in scsi_end_request() was added after the patch was first written and then got lost during rebasing.
If this really does fix your problem and nobody has any other objections to it, I'll submit a revised version with the missing line added back in.
You might also want to try testing separately this patch from James:
http://marc.info/?l=linux-scsi&m=123506890608499&w=2
It may solve the same problem, though in a different way.
Alan Stern
Quoted 11 lines · Alan Stern
Quoted 9 lines · Ingo Molnar
Quoted 5 lines · Alan Stern
I have no idea if this will make any difference for the problem you're seeing, but it has been submitted and it's worth trying out. If the problem still occurs, I'll write a diagnostic patch to add log messages giving the destiny of each request in
scsi_io_completion().
Quoted 4 lines
Quoted 2 lines
OK, i've undone the reverts and have applied your fix - it will take a few hours to see whether the hang still occurs.
Any definitive results yet?
Yes, as i wrote before, the bug is fixed.
Quoted 4 lines
It turns out that the patch I posted earlier is not quite correct; the "
__scsi_release_buffers(cmd, 0);" line inscsi_end_request()was added after the patch was first written and then got lost during rebasing.
Yeah, rebasing is a really bad idea in general.
Quoted 3 lines
If this really does fix your problem and nobody has any other objections to it, I'll submit a revised version with the missing line added back in.
Sure, no objections.
Ingo