Skip to contentSkip to conversation

libata-sff: fix 32-bit PIO ATAPI regression

PATCH Applied Sergei Shtylyov 2 participants 3 messages Feb 15, 2009 – Feb 17, 2009 libata

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 libata-sff: fix 32-bit PIO ATAPI regression

Commit 871af1210f13966ab911ed2166e4ab2ce775b99d (libata: Add 32bit PIO support) has caused all kinds of errors on the ATAPI devices, so it has been empirically proven that one shouldn't try to read/write an extra data word when a device is not expecting it already. "Don't do it then"; however, still use a chance to do 32-bit read/write one last time when there are exactly 3 trailing bytes.

Oh, and stop pointlessly swapping the bytes to and fro on big-endian machines by using io*_rep() accessors which shouldn't byte-swap.

This patch should fix the kernel.org bug #12609.

---
Added the comments and signoff.
The patch is against the recent Linus' tree.
It's a hopefully better replacement for Hugh Dickins most recent patch
(http://marc.info/?l=linux-ide&m=123352294619281)...

 drivers/ata/libata-sff.c |   28 +++++++++++++++++++++-------
 1 files changed, 21 insertions(+), 7 deletions(-)
drivers/ata/libata-sff.c +21 -7
Index: linux-2.6/drivers/ata/libata-sff.c
===================================================================
@@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct 
 	else
 		iowrite32_rep(data_addr, buf, words);
 
+	/* Transfer trailing bytes, if any */
 	if (unlikely(slop)) {
-		__le32 pad;
+		unsigned char pad[4];
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - slop;
+
+		/*
+		 * Use io*_rep() accessors here as well to avoid pointlessly
+		 * swapping bytes to and fro on the big endian machines...
+		 */
 		if (rw == READ) {
-			pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
-			memcpy(buf + buflen - slop, &pad, slop);
+			if (slop < 3)
+				ioread16_rep(data_addr, pad, 1);
+			else
+				ioread32_rep(data_addr, pad, 1);
+			memcpy(buf, pad, slop);
 		} else {
-			memcpy(&pad, buf + buflen - slop, slop);
-			iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+			memcpy(pad, buf, slop);
+			if (slop < 3)
+				iowrite16_rep(data_addr, pad, 1);
+			else
+				iowrite32_rep(data_addr, pad, 1);
 		}
-		words++;
 	}
-	return words << 2;
+	return (buflen + 1) & ~1;
 }
 EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
Applied
#1 lore raw
Quoted 11 lines · Sergei Shtylyov

Commit 871af1210f13966ab911ed2166e4ab2ce775b99d (libata: Add 32bit PIO support) has caused all kinds of errors on the ATAPI devices, so it has been empirically proven that one shouldn't try to read/write an extra data word when a device is not expecting it already. "Don't do it then"; however, still use a chance to do 32-bit read/write one last time when there are exactly 3 trailing bytes.

Oh, and stop pointlessly swapping the bytes to and fro on big-endian machines by using io*_rep() accessors which shouldn't byte-swap.

This patch should fix the kernel.org bug #12609.

Quoted 7 lines

---
Added the comments and signoff.
The patch is against the recent Linus' tree.
It's a hopefully better replacement for Hugh Dickins most recent patch
(http://marc.info/?l=linux-ide&m=123352294619281)...

applied, much appreciated!

#2 lore raw

Hello.

Quoted 2 lines · Jeff Garzik
Quoted 2 lines

Commit 871af1210f13966ab911ed2166e4ab2ce775b99d (libata: Add 32bit PIO support) has caused all kinds of errors on the ATAPI devices, so it has been empirically

It started to look as we still don't really know what caused all these
errors... :-/

MBR, Sergei