Skip to contentSkip to conversation

Cant Create FIT uImage

U-Boot hendrik 2 participants 2 messages Feb 12, 2009 – Feb 16, 2009

lore
Share & tools
lore

hendrik

author
#0 lore raw

Hi all

I would like to boot using the new style FDT kernel booting. I have been using the guidelines in "u-boot-2009/doc/uImage.FIT/how to" and I have the latests dtc (v1.2) . But I am unable to compile the FIT image. I get a syntax error for line 1:

#u-boot/tools/mkimage -f /work/kernel_fdt.its /work/kernel_fdt.itb
FIT format handling
Trying to execute "dtc -I dts -O dtb -p 500 /work/kernel_fdt.its >
/work/kernel_fdt.itb.tmp"
DTC: dts->dtb on file "/work/kernel_fdt.its"
Error: /work/kernel_fdt.its 1:0 syntax error
FATAL ERROR: Unable to parse input tree usr/src/u-boot/tools/mkimage: Can't read /work/kernel_fdt.itb.tmp:
Invalid argument
#

Can anyone pleas help me to get the FIT image to compile? My kernel_fdt.its looks as follows: ( taken tron the example given in u-boot-2009/doc/uImage.FIT/kernel_fdt.its )

    / {
        #address-cells = <1>;
        description = "Simple image with single Linux kernel and FDT blob";

        images {
            kernel at 1 {
                description = "Linux kernel";
                data = /incbin/("/work/build/target/linux/vmlinux.bin.gz");
                type = "kernel";
                arch = "ppc";
                os = "linux";
                compression = "gzip";
                load = <00000000>;
                entry = <00000000>;
                hash at 1 {
                    algo = "crc32";
                };
                hash at 2 {
                    algo = "sha1";
                };
            };
            fdt at 1 {
                description = "Flattened Device Tree blob";
                data = /incbin/("/work/build/target/boot/equus.dtb");
                type = "flat_dt";
                arch = "ppc";
                compression = "none";
                hash at 1 {
                    algo = "crc32";
                };
                hash at 2 {
                    algo = "sha1";
                };
            };
        };

        configurations {
            default = "conf at 1";
            conf at 1 {
                description = "Boot Linux kernel with FDT blob";
                kernel = "kernel at 1";
                fdt = "fdt at 1";
            };
        };
    };

Thanks Hendik

#1 lore raw

Dear hendrik,

Quoted 17 lines · In message <[email protected]> you wrote:

I would like to boot using the new style FDT kernel booting. I have been using the guidelines in "u-boot-2009/doc/uImage.FIT/how to" and I have the latests dtc (v1.2) . But I am unable to compile the FIT image. I get a syntax error for line 1:

#u-boot/tools/mkimage -f /work/kernel_fdt.its /work/kernel_fdt.itb
FIT format handling
Trying to execute "dtc -I dts -O dtb -p 500 /work/kernel_fdt.its >
/work/kernel_fdt.itb.tmp"
DTC: dts->dtb on file "/work/kernel_fdt.its"
Error: /work/kernel_fdt.its 1:0 syntax error
FATAL ERROR: Unable to parse input tree usr/src/u-boot/tools/mkimage: Can't read /work/kernel_fdt.itb.tmp:
Invalid argument
#

Quoted 1 line

Can anyone pleas help me to get the FIT image to compile?

You need a dtc version that supports the binary include feature.

Best regards,

Wolfgang Denk

Signature · 7 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You could end up being oddly sad and full of a strange, diffuse  com-
passion  which would lead you to believe that it might be a good idea
to wipe out the whole human race and start again with amoebas.
                                 - Terry Pratchett, _Guards! Guards!_