Skip to contentSkip to conversation

U-Boot Makefile question

U-Boot Steven Zedeck 4 participants 4 messages Feb 17, 2009 – Feb 18, 2009

lore
Share & tools
lore
#0 lore raw

Hi all,
I am new to u-boot. But I am ramping up pretty fast. My primary issue is understanding the Makefile syntax. Is there a good tutorial somewhere that explains how u-boot uses the Makefiles and their syntax?

For example, I'm having problems understanding what this means in a Makefile:

COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o

COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

This is from drivers/mtd/Makefile.

How does COBJS get initially defined upon entry into the Makefile?

Does at45.o get added to the list of objects to be built only if the CONFIG_HAS_DATAFLASH flag is set?

What does the "-" sign mean before the "$" ?

What does this mean? COBJS := $(COBJS-y)

I'm sorry for the "dumb" questions. Any help with the understanding of Makefiles would be greatly appreciated.

Thanks in advance,
Steve

Signature · 2 lines
View this message in context: http://www.nabble.com/U-Boot-Makefile-question-tp22057574p22057574.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw

Steven Zedeck said the following:

Quoted 13 lines

For example, I'm having problems understanding what this means in a Makefile:

COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o

COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

Quoted 9 lines

This is from drivers/mtd/Makefile.

How does COBJS get initially defined upon entry into the Makefile?

Does at45.o get added to the list of objects to be built only if the CONFIG_HAS_DATAFLASH flag is set?

What does the "-" sign mean before the "$" ?

On start of compile, the file autoconf.mk is generated along your board configuration #defines in board/<board>/<board-name>.h
It looks like this:
CONFIG_PPC=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SYS_CLK_FREQ=100000000
CONFIG_CMD_ITEST=y
...

autoconf.mk is then used as a predefinition file for the rules of your Makefile. So
COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
evaluates to either
COBJS-y += at45.o
or
COBJS- += at45.o
or
COBJS-n += at45.o

Quoted 1 line

What does this mean? COBJS := $(COBJS-y)

This is the assignment of the dynamically built string to the variable that is then used for the gcc command.

HTH

Signature · 1 line
Michael
#2 lore raw
In reply to Steven Zedeck
Quoted 1 line · On Tuesday 17 February 2009 08:43:31 Steven Zedeck wrote:

What does the "-" sign mean before the "$" ?

it doesnt mean anything. make allows "-" in variable names as well as many other chars you might not expect.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090217/4d9f80c2/attachment-0001.pgp

#3 lore raw
In reply to Steven Zedeck

Hi Steven,
I recommend you to read the GNU make manual.
See http://www.gnu.org/software/make/manual/

Quoted 44 lines · Steven Zedeck

Hi all,
I am new to u-boot. But I am ramping up pretty fast. My primary issue is understanding the Makefile syntax. Is there a good tutorial somewhere that explains how u-boot uses the Makefiles and their syntax?

For example, I'm having problems understanding what this means in a Makefile:

COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o

COBJS   := $(COBJS-y)
SRCS    := $(COBJS:.o=.c)
OBJS    := $(addprefix $(obj),$(COBJS))

This is from drivers/mtd/Makefile.

How does COBJS get initially defined upon entry into the Makefile?

Does at45.o get added to the list of objects to be built only if the CONFIG_HAS_DATAFLASH flag is set?

What does the "-" sign mean before the "$" ?

What does this mean? COBJS := $(COBJS-y)

I'm sorry for the "dumb" questions. Any help with the understanding of Makefiles would be greatly appreciated.

Thanks in advance,
Steve
--
View this message in context: http://www.nabble.com/U-Boot-Makefile-question-tp22057574p22057574.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot