U-Boot Digest, Vol 9, Issue 217
A message that is not in the archive (sent off-list or not yet received): [email protected]
Actually she asked me to mail
Regards,
Afzal Nadirshah
-----Original Message-----
From: [email protected] [mailto:u-boot-bounces at lists.denx.de] On Behalf Of u-boot-request at lists.denx.de
Sent: Wednesday, February 18, 2009 4:22 PM
To: u-boot at lists.denx.de
Subject: U-Boot Digest, Vol 9, Issue 217
Send U-Boot mailing list submissions to
u-boot at lists.denx.de
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.denx.de/mailman/listinfo/u-boot
or, via email, send a message with subject or body 'help' to
u-boot-request at lists.denx.de
You can reach the person managing the list at
u-boot-owner at lists.denx.de
When replying, please edit your Subject line so it is more specific than "Re: Contents of U-Boot digest..."
Today's Topics:
1. Re: [PATCH] 7/12 Multiadapter/multibus I2C, drivers part 4 (Wolfgang Denk)
2. Re: RAM Probing for ads5121rev4 (Wolfgang Denk)
3. AT91RM9200 U-Boot can not load initrd from flash (Dmitry K)
4. Re: U-Boot Makefile question (Frank Svendsb?e)
5. what are the configurations needed for new board (ABIRAMA SUNDARI)
6. which file have memory map information (ABIRAMA SUNDARI)
7. Re: flash configuration in u-boot (zix)
8. Re: flash configuration in u-boot (ABIRAMA SUNDARI)
9. Re: AT91RM9200 U-Boot can not load initrd from flash (Wolfgang Denk)
10. [U-BOOT][PATCH 1/4] mflash : Change MG_BASE define to inline
function (unsik Kim)
----------------------------------------------------------------------
Message: 1
Date: Wed, 18 Feb 2009 09:55:16 +0100
From: Wolfgang Denk <[email protected]>
Subject: Re: [U-Boot] [PATCH] 7/12 Multiadapter/multibus I2C, drivers
part 4
To: hs at denx.de
Cc: U-Boot user list <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1
Dear Heiko,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 5 lines
Quoted 3 lines
But is is possible to use that code when running from flash, if this current pointer is writeable ...
Yes, it is possible, but then - ther eis no need for it.
For what is no need?
For dynamic reconfiguration of I2C busses before relocation.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Pig: An animal (Porcus omnivorous) closely allied to the human race by the splendor and vivacity of its appetite, which, however, is in-
ferior in scope, for it balks at pig. - Ambrose Bierce
------------------------------
Message: 2
Date: Wed, 18 Feb 2009 10:01:33 +0100
From: Wolfgang Denk <[email protected]>
Subject: Re: [U-Boot] RAM Probing for ads5121rev4
To: Emanuele Placidi <[email protected]>
Cc: u-boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1
Dear Emanuele Placidi,
Quoted 5 lines · In message <[email protected]> you…
In your opinion it is possible to probe the ram before initialize it?
Unfortunately there are some rev4 which are equipped with different ram model.
Examples are welcomed.
It is a standard feature in U-Boot (and has always been right from the start with PPCBoot nearly 10 years ago) that we auto-detected the memory configuration on the boards, both for RAM and flash. Some boards / architectures did not bother to implement this, but the feature itself is present.
The details depend on processor, memory controller properties, specific RAM types used, etc.
In case of the Micron/Elpida issue on the ADS5121, that should be not too difficult to solve.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de How many QA engineers does it take to screw in a lightbulb? 3: 1 to screw it in and 2 to say "I told you so" when it doesn't work.
------------------------------
Message: 3
Date: Wed, 18 Feb 2009 12:06:11 +0300
From: Dmitry K <[email protected]>
Subject: [U-Boot] AT91RM9200 U-Boot can not load initrd from flash
To: <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"; format="flowed"
Hello
I've a board quite similar to AT91RM9200DK. I've compiled U-Boot 1.1.2 and 1.3.4 for it and both work fine with images loaded via tftp. When I try to boot same images from flash I got kernel running fine until this:
...
No filesystem could mount root, tried: ext2 cramfs vfat romfs
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(1,0)
Seems like initrd is not copied to RAM by U-Boot.
The u-boot environment is:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
setenv bootargs 'root=/dev/ram rw initrd=20a00000,500000
ramdisk_size=8192 console=ttyS0,115200 mem=32M mtdparts=phys_mapped_flash:64K(boot),64K(uboot),2944K(kernel),4608K(initrd),256K(settings),-(unused)' setenv bootcmd "bootm 10020000 10300000"
The images are:
U-Boot> imls
Legacy Image at 10020000:
Image Name: K_2009-01-12_13:47:42 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2443456 Bytes = 2.3 MB
Load Address: 20008000
Entry Point: 20008000
Verifying Checksum ... OK
Legacy Image at 10300000:
Image Name: FS_2009-01-12_14:13:24 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3446369 Bytes = 3.3 MB
Load Address: 20a00000
Entry Point: 20a00000
Verifying Checksum ... OK
What am I missing?
--
Dmitry K.
------------------------------
Message: 4
Date: Wed, 18 Feb 2009 10:34:11 +0100
From: Frank Svendsb?e <[email protected]>
Subject: Re: [U-Boot] U-Boot Makefile question
To: Steven Zedeck <[email protected]>
Cc: u-boot at lists.denx.de
Message-ID:
<[email protected]>
Content-Type: text/plain; charset=ISO-8859-1
Hi Steven,
I recommend you to read the GNU make manual.
See http://www.gnu.org/software/make/manual/
Quoted 39 lines · Steven Zedeck
Hi all,
I am new to u-boot. But I am ramping up pretty fast. My primary issue is understanding theMakefilesyntax. Is there a good tutorial somewhere that explains how u-boot uses the Makefiles and their syntax?For example, I'm having problems understanding what this means in a
Makefile:COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.oCOBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))This is from
drivers/mtd/Makefile.How does COBJS get initially defined upon entry into the
Makefile?Does at45.o get added to the list of objects to be built only if the
CONFIG_HAS_DATAFLASHflag is set?What does the "-" sign mean before the "$" ?
What does this mean? COBJS := $(COBJS-y)
I'm sorry for the "dumb" questions. Any help with the understanding of Makefiles would be greatly appreciated.
Thanks in advance,
Steve
--
View this message in context: http://www.nabble.com/U-Boot-Makefile-question-tp22057574p22057574.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 5 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
------------------------------
Message: 5
Date: Wed, 18 Feb 2009 01:42:49 -0800 (PST)
From: ABIRAMA SUNDARI <[email protected]>
Subject: [U-Boot] what are the configurations needed for new board
To: u-boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
hi all
i am new to u-boot.i dont know what are configurations are necessary for me
to change for adding new board.
by
abirama
--
View this message in context: http://www.nabble.com/what-are-the-configurations-needed-for-new-board-tp22075338p22075338.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
------------------------------
Message: 6
Date: Wed, 18 Feb 2009 01:49:29 -0800 (PST)
From: ABIRAMA SUNDARI <[email protected]>
Subject: [U-Boot] which file have memory map information
To: u-boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
--
View this message in context: http://www.nabble.com/which-file-have-memory-map-information-tp22075445p22075445.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
------------------------------
Message: 7
Date: Wed, 18 Feb 2009 01:50:00 -0800 (PST)
From: zix <[email protected]>
Subject: Re: [U-Boot] flash configuration in u-boot
To: u-boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
hi everybody, any idea about this? I am desperately looking for an answer in this regard...not finding anything in any forums also...am very new to uboot..
Regards,
zix
Quoted 18 lines · zix
Hi, I am configuring u-boot to my board running on arm926ejs core atmel board. the
flash is Nand512-A, 64Mbyte, configured on 8bit I/O bus. page size: 512 bytes
block size: 16kNow, in u-boot they accept in sectors, but am not having any clue how this is related to sectors.
Can anybody please advice what values should I give for
CFG_MAX_FLASH_SECT,CFG_ENV_ADDR(considering if I have to write my env in 2nd sector, then I need to know the sector size).....the datasheet doesnot seem to provide information about this..actually, i am trying to correlate between, pages, blocks and sectors as in flash data sheet and sector size meant by uboot. And also wondering which flash driver I should select from u-boot as my board is not listed there.
Quoted 3 lines
Thanks a lot,
zix
--
View this message in context: http://www.nabble.com/flash-configuration-in-u-boot-tp22071753p22075448.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
------------------------------
Message: 8
Date: Wed, 18 Feb 2009 02:00:05 -0800 (PST)
From: ABIRAMA SUNDARI <[email protected]>
Subject: Re: [U-Boot] flash configuration in u-boot
To: u-boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
hi
me too new to u-boot .pls tell me what are configuration files i need to chage for new board.
by
abi
Quoted 5 lines · zix
hi everybody, any idea about this? I am desperately looking for an answer in this regard...not finding anything in any forums also...am very new to uboot..
Quoted 28 lines
Regards,
zixQuoted 21 lines · zix
Hi, I am configuring u-boot to my board running on arm926ejs core atmel board. the
flash is Nand512-A, 64Mbyte, configured on 8bit I/O bus. page size: 512 bytes
block size: 16kNow, in u-boot they accept in sectors, but am not having any clue how this is related to sectors.
Can anybody please advice what values should I give for
CFG_MAX_FLASH_SECT,CFG_ENV_ADDR(considering if I have to write my env in 2nd sector, then I need to know the sector size).....the datasheet doesnot seem to provide information about this..actually, i am trying to correlate between, pages, blocks and sectors as in flash data sheet and sector size meant by uboot. And also wondering which flash driver I should select from u-boot as my board is not listed there.Thanks a lot,
zix
--
View this message in context: http://www.nabble.com/flash-configuration-in-u-boot-tp22071753p22075622.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
------------------------------
Message: 9
Date: Wed, 18 Feb 2009 11:46:46 +0100
From: Wolfgang Denk <[email protected]>
Subject: Re: [U-Boot] AT91RM9200 U-Boot can not load initrd from flash
To: Dmitry K <[email protected]>
Cc: U-Boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1
Dear Dmitry,
Quoted 8 lines · In message <[email protected]> you wrote:
I've a board quite similar to AT91RM9200DK. I've compiled U-Boot 1.1.2 and 1.3.4 for it and both work fine with images loaded via tftp. When I try to boot same images from flash I got kernel running fine until this:
...
No filesystem could mount root, tried: ext2 cramfs vfat romfsKernel panic - not syncing: VFS: Unable to mount root fs onunknown-block(1,0)
Yes, that's a know limitation (or call it feature, or bug, as you like) of the ARM kernel.
Quoted 1 line
Seems like initrd is not copied to RAM by U-Boot.
No, of course it is not copied. Why should we copy the compressed image to ram? That's just a waste of CPU cycles. The kernel can read it from flash as well.
Patches for this problem were submitted a few times since kenrel version 2.4.17 or so, and posted and re-posted again and again here on the ML. Search the archives for details.
Quoted 1 line
What am I missing?
You're running on ARM...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
1st Old Man: Gee, its windy today. 2nd Old Man: No it's not... it's Thursday. 3rd Old Man: Yeh, me too. Let's go for a beer.
------------------------------
Message: 10
Date: Wed, 18 Feb 2009 19:51:34 +0900
From: unsik Kim <[email protected]>
Subject: [U-Boot] [U-BOOT][PATCH 1/4] mflash : Change MG_BASE define
to inline function
To: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: scottwood at freescale.com, u-boot at lists.denx.de
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8; format=flowed
--- drivers/block/mg_disk.c | 45 ++++++++++++++++++++++++--------------------- 1 files changed, 24 insertions(+), 21 deletions(-)
drivers/block/mg_disk.c +24 -21
@@ -34,10 +34,13 @@#define MG_RES_SEC ((CONFIG_MG_DISK_RES) << 1) -#define MG_BASE (host.drv_data->base) -static struct mg_host host; +static inline u32 mg_base (void ) +{ +return host.drv_data->base; +} +static block_dev_desc_t mg_disk_dev = { .if_type =IF_TYPE_ATAPI , .part_type =PART_TYPE_UNKNOWN ,
@@ -122,7 +125,7 @@ static unsigned int mg_wait (u32 expect, u32 msec)reset_timer (); from =get_timer (0 ); - status =readb (MG_BASE +MG_REG_STATUS ); + status =readb (mg_base () +MG_REG_STATUS ); do { cur = get_timer(from); if (status & MG_REG_STATUS_BIT_BUSY) {
@@ -131,7 +134,7 @@ static unsigned int mg_wait (u32 expect, u32 msec) }else {/* Check the error condition! */ if (status &MG_REG_STATUS_BIT_ERROR ) { - err =readb (MG_BASE +MG_REG_ERROR ); + err =readb (mg_base () +MG_REG_ERROR );mg_dump_status ("mg_wait" , status, err);break ; }
@@ -144,7 +147,7 @@ static unsigned int mg_wait (u32 expect, u32 msec)if (status &MG_REG_STATUS_BIT_DATA_REQ )break ; } - status =readb (MG_BASE +MG_REG_STATUS ); + status =readb (mg_base () +MG_REG_STATUS ); }while (cur < msec);if (cur >= msec)
@@ -160,15 +163,15 @@ static int mg_get_disk_id (void)u32 i, err, res;u16 *buff = (u16 *)iobuf; -writeb (MG_CMD_ID ,MG_BASE +MG_REG_COMMAND ); +writeb (MG_CMD_ID ,mg_base () +MG_REG_COMMAND ); err =mg_wait (MG_REG_STATUS_BIT_DATA_REQ ,3000 );if (err)return err;for (i =0 ; i < (MG_SECTOR_SIZE /sizeof (u32)) >>1 ; i++) - buff[i] =readw (MG_BASE +MG_BUFF_OFFSET + i *2 ); + buff[i] =readw (mg_base () +MG_BUFF_OFFSET + i *2 ); -writeb (MG_CMD_RD_CONF ,MG_BASE +MG_REG_COMMAND ); +writeb (MG_CMD_RD_CONF ,mg_base () +MG_REG_COMMAND ); err =mg_wait (MG_STAT_READY ,3000 );if (err)return err;
@@ -235,18 +238,18 @@ static int mg_disk_reset (void)/* soft reset on */ writeb (MG_REG_CTRL_RESET |MG_REG_CTRL_INTR_DISABLE , -MG_BASE +MG_REG_DRV_CTRL ); +mg_base () +MG_REG_DRV_CTRL ); err =mg_wait (MG_REG_STATUS_BIT_BUSY ,3000 );if (err)return err;/* soft reset off */ -writeb (MG_REG_CTRL_INTR_DISABLE ,MG_BASE +MG_REG_DRV_CTRL ); +writeb (MG_REG_CTRL_INTR_DISABLE ,mg_base () +MG_REG_DRV_CTRL ); err =mg_wait (MG_STAT_READY ,3000 );if (err)return err; - init_status =readb (MG_BASE +MG_REG_STATUS ) &0xf ; + init_status =readb (mg_base () +MG_REG_STATUS ) &0xf ;if (init_status ==0xf )return MG_ERR_INIT_STAT ;
@@ -265,13 +268,13 @@ static unsigned int mg_out(unsigned int sect_num,if (err)return err; -writeb ((u8 )sect_cnt,MG_BASE +MG_REG_SECT_CNT ); -writeb ((u8 )sect_num,MG_BASE +MG_REG_SECT_NUM ); -writeb ((u8)(sect_num >>8 ),MG_BASE +MG_REG_CYL_LOW ); -writeb ((u8)(sect_num >>16 ),MG_BASE +MG_REG_CYL_HIGH ); +writeb ((u8 )sect_cnt,mg_base () +MG_REG_SECT_CNT ); +writeb ((u8 )sect_num,mg_base () +MG_REG_SECT_NUM ); +writeb ((u8)(sect_num >>8 ),mg_base () +MG_REG_CYL_LOW ); +writeb ((u8)(sect_num >>16 ),mg_base () +MG_REG_CYL_HIGH );writeb ((u8)((sect_num >>24 ) |MG_REG_HEAD_LBA_MODE ), -MG_BASE +MG_REG_DRV_HEAD ); -writeb (cmd,MG_BASE +MG_REG_COMMAND ); +mg_base () +MG_REG_DRV_HEAD ); +writeb (cmd,mg_base () +MG_REG_COMMAND );return err; }
@@ -293,11 +296,11 @@ static unsigned int mg_do_read_sects(void *buff, u32 sect_num, u32 sect_cnt)/* TODO : u16 unaligned case */ for (j =0 ; j <MG_SECTOR_SIZE >>1 ; j++) { *(u16 *)buff_ptr = -readw (MG_BASE +MG_BUFF_OFFSET + (j <<1 )); +readw (mg_base () +MG_BUFF_OFFSET + (j <<1 )); buff_ptr +=2 ; } -writeb (MG_CMD_RD_CONF ,MG_BASE +MG_REG_COMMAND ); +writeb (MG_CMD_RD_CONF ,mg_base () +MG_REG_COMMAND );MG_DBG ("%u (0x%8.8x) sector read" , sect_num + i, (sect_num + i) *MG_SECTOR_SIZE );
@@ -426,11 +429,11 @@ static int mg_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt)/* TODO : u16 unaligned case */ for (j =0 ; j <MG_SECTOR_SIZE >>1 ; j++) {writew (*(u16 *)buff_ptr, -MG_BASE +MG_BUFF_OFFSET + (j <<1 )); +mg_base () +MG_BUFF_OFFSET + (j <<1 )); buff_ptr +=2 ; } -writeb (MG_CMD_WR_CONF ,MG_BASE +MG_REG_COMMAND ); +writeb (MG_CMD_WR_CONF ,mg_base () +MG_REG_COMMAND );MG_DBG ("%u (0x%8.8x) sector write" , sect_num + i, (sect_num + i) *MG_SECTOR_SIZE );
--
1.5.6.6
------------------------------
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
End of U-Boot Digest, Vol 9, Issue 217
**************************************
Dear Afzal Nadirshah,
Quoted 1 line · In message <174230991E95D743B0C91DF471EF44E84343F2EFEF@MTW02MSG02.mindtree.com>…
Actually she asked me to mail
That's very interesting information, and definitely worth a 600+ lines full quote.
Please read about netiquette before posting again.
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is is no reason for any individual to have a computer in their
home. -- Ken Olsen (President of Digital Equipment Corporation),
Convention of the World Future Society, in Boston, 1977Hi All,
It was a typo. Sorry for the inconvenience caused.
Regards,
Afzal Nadirshah
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Wednesday, February 18, 2009 4:31 PM
To: Afzal Nadirshah
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] U-Boot Digest, Vol 9, Issue 217
Dear Afzal Nadirshah,
Quoted 1 line · In message <174230991E95D743B0C91DF471EF44E84343F2EFEF@MTW02MSG02.mindtree.com>…
Actually she asked me to mail
That's very interesting information, and definitely worth a 600+ lines full quote.
Please read about netiquette before posting again.
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There is is no reason for any individual to have a computer in their
home. -- Ken Olsen (President of Digital Equipment Corporation),
Convention of the World Future Society, in Boston, 1977