Skip to contentSkip to conversation

Fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree

PATCH In review Josh Hunt 2 participants 3 messages Feb 20, 2009 – Mar 7, 2009 Kbuild

lore
Share & tools
lore

Josh Hunt

author
#0 lore raw

PATCH v2 1/1 Fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree

Updated patch with Sam's fixes as per this discussion:
http://lkml.org/lkml/2009/2/15/18

Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild.

mkspec creates kernel.spec using KERNELRELEASE:

<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>

When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any additional version info from SCM. Next, the srctree is tarred up and SCM information is excluded.

rpmbuild reruns make and in the process generates a new include/config/kernel.release and thus a new KERNELRELEASE. However this time the SCM information is gone so KERNELRELEASE no longer has the additional version information. When "make modules_install" runs, it uses the new KERNELRELEASE value to determine where to install the modules. This conflicts with where the spec file assumes they are going because of the mis-matching KERNELRELEASE versions.

<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
INSTALL crypto/aead.ko
INSTALL crypto/cbc.ko
INSTALL crypto/chainiv.ko
INSTALL crypto/crc32c.ko
INSTALL crypto/crypto_algapi.ko
INSTALL crypto/crypto_blkcipher.ko
INSTALL crypto/crypto_hash.ko
INSTALL crypto/cryptomgr.ko
INSTALL crypto/ecb.ko
INSTALL crypto/eseqiv.ko
INSTALL crypto/krng.ko
INSTALL crypto/md5.ko
INSTALL crypto/pcbc.ko
INSTALL crypto/rng.ko
INSTALL drivers/block/cciss.ko
INSTALL drivers/hid/hid-dummy.ko
INSTALL drivers/scsi/iscsi_tcp.ko
INSTALL drivers/scsi/libiscsi.ko
INSTALL drivers/scsi/libiscsi_tcp.ko
INSTALL drivers/scsi/scsi_transport_iscsi.ko
INSTALL drivers/scsi/scsi_wait_scan.ko
INSTALL fs/lockd/lockd.ko
INSTALL fs/nfs/nfs.ko
INSTALL fs/nfsd/nfsd.ko
INSTALL lib/libcrc32c.ko
INSTALL net/sunrpc/sunrpc.ko
DEPMOD 2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2 /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422

RPM build errors:
File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>

I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both with and without CONFIG_LOCALVERSION_AUTO=y.

---

Makefile 2009-02-19 23:13:31.000000000 -0800 renamed from Makefile 2009-02-16 17:07:10.000000000 -0800 +2 -3
Index: linux-2.6/Makefile
===================================================================
@@ -903,12 +903,18 @@ localver = $(subst $(space),, $(string)
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the

kernel
+# from the copied source
ifdef CONFIG_LOCALVERSION_AUTO
- _localver-auto = $(shell $(CONFIG_SHELL) \
- $(srctree)/scripts/setlocalversion
$(srctree))
+
+ifeq ($(wildcard .scmversion),)
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion
$(srctree))
+else
+ _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+

        localver-auto  = $(LOCALVERSION)$(_localver-auto)

endif

Index: linux-2.6/scripts/package/Makefile
===================================================================
--- linux-2.6.orig/scripts/package/Makefile 2009-02-16
17:07:10.000000000 -0800
+++ linux-2.6/scripts/package/Makefile 2009-02-19 23:13:31.000000000 -0800
@@ -35,9 +35,10 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srct
rpm-pkg rpm: $(objtree)/kernel.spec FORCE

        $(MAKE) clean
        $(PREV) ln -sf $(srctree) $(KERNELPATH)
+       $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion >
$(objtree)/.scmversion
        $(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz
$(KERNELPATH)/.
        $(PREV) rm $(KERNELPATH)
-
+       rm -f $(objtree)/.scmversion
        set -e; \
        $(CONFIG_SHELL) $(srctree)/scripts/mkversion >
$(objtree)/.tmp_version
        set -e; \
#1 lore raw
Quoted 2 lines · Josh Hunt

Updated patch with Sam's fixes as per this discussion:
http://lkml.org/lkml/2009/2/15/18

Thanks for resending. I will replace my queued version with this one. I hope to find time during the weekend to deal with this.

Sam

#2 lore raw
In reply to Josh Hunt
Quoted 6 lines · Josh Hunt

Updated patch with Sam's fixes as per this discussion:
http://lkml.org/lkml/2009/2/15/18

Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild.

...
Hand applied - your patches continue to be wordwrapped. Please see if you can fix this next time.

Thanks,
Sam