Skip to contentSkip to conversation

PXA27X UDC Support.

RFC Superseded Vivek Kutal 3 participants 4 messages Feb 20, 2009 – Feb 21, 2009 USB

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

RFC 1/1 PXA27X UDC Support.

Hi all,
This is the patch for UDC support for PXA27X , it is based on a
patch previously submitted by Rodolfo Giometti.
--
Regards,
Vivek Kutal

From 081685ce3c5b80bc439485ec8e1847d85dc7ad70 Mon Sep 17 00:00:00 2001
From: Vivek Kutal <[email protected]>
Date: Thu, 19 Feb 2009 17:56:38 +0530
Subject: [PATCH] Support for PXA27X UDC.

---
 drivers/usb/Makefile          |    1 +
 drivers/usb/pxa27x_udc_regs.h |  417 ++++++++++++++++++++++++
 drivers/usb/usbdcore_pxa27x.c |  714 
+++++++++++++++++++++++++++++++++++++++++
 include/usbdcore_pxa2xx.h     |   68 ++++
 4 files changed, 1200 insertions(+), 0 deletions(-)
 create mode 100644 drivers/usb/pxa27x_udc_regs.h
 create mode 100644 drivers/usb/usbdcore_pxa27x.c
 create mode 100644 include/usbdcore_pxa2xx.h
drivers/usb/Makefile +1 -0
index b306a65..0a1886a 100644
@@ -47,6 +47,7 @@ COBJS-y += usbdcore_ep0.o
 COBJS-$(CONFIG_OMAP1510) += usbdcore_omap1510.o
 COBJS-$(CONFIG_OMAP1610) += usbdcore_omap1510.o
 COBJS-$(CONFIG_MPC885_FAMILY) += usbdcore_mpc8xx.o
+COBJS-$(CONFIG_PXA27X) += usbdcore_pxa27x.o
 endif
 
 COBJS    := $(COBJS-y)
drivers/usb/pxa27x_udc_regs.h new file +13 -0
new file mode 100644
index 0000000..47bf66e
@@ -0,0 +1,417 @@
+/*
+ *  Taken from linux kernel include/asm-arm/arch-pxa/pxa-regs.h
+ *
+ */
+
+
+#ifndef __PXA27X_UDC_REGS_H
+#define __PXA27X_UDC_REGS_H
+
+/*
+ * USB Device Controller
+ */
+#define UDC_RES1        __REG(0x40600004)  /* UDC Undocumented - 

Reserved1 */
+#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented -
Reserved2 */
+#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented -
Reserved3 */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S (25)
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S (22)
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface
Number */
+#define UDCCONR_AISN_S (19)
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S (15)
+#define UDCCONR_ET_S (13)
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S (2)

+#define UDCCONR_DE            (1 << 1)        /* Double Buffering Enable */
+#define UDCCONR_EE            (1 << 0)        /* Endpoint Enable */

+#define GPDR1_B_USB_DEC_N (0x01 << 3)
+
+
+#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
+#define UP2OCR __REG(0x40600020)
+#define UDCWAKEUP __REG(0x40F00044)
+#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control
Register0 */
+#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control
Register1 */
+#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status
Register 0 */
+#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status
Register 1 */
+
+
+

+#define UDCCR            __REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE        (1 << 0)    /* UDC enable */
+#define UDCCR_UDA        (1 << 1)    /* UDC active */
+#define UDCCR_RSM        (1 << 2)    /* Device resume */
+#define UDCCR_RESIR        (1 << 29)    /* Resume interrupt request */
+#define UDCCR_SUSIR        (1 << 28)    /* Suspend interrupt request */

+#define UDCCR_SM (1 << 28) /* Suspend interrupt mask */
+#define UDCCR_RSTIR (1 << 27) /* Reset interrupt request */
+#define UDCCR_REM (1 << 27) /* Reset interrupt mask */
+#define UDCCR_RM (1 << 29) /* resume interrupt mask */
+#define UDCCR_SRM UDCCR_SM|UDCCR_RM
+
+#define UDCCS0 __REG(0x40600100) /* UDC Endpoint 0
Control/Status Register */

+#define UDCCS0_OPR        (1 << 0)    /* OUT packet ready */
+#define UDCCS0_IPR        (1 << 1)    /* IN packet ready */
+#define UDCCS0_FTF        (1 << 2)    /* Flush Tx FIFO */
+#define UDCCS0_DRWF        (1 << 16)    /* Device remote wakeup feature */
+#define UDCCS0_SST        (1 << 4)    /* Sent stall */
+#define UDCCS0_FST        (1 << 5)    /* Force stall */
+#define UDCCS0_RNE        (1 << 6)    /* Receive FIFO no empty */

+#define UDCCS0_SA (1 << 7) /* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1 __REG(0x40600104) /* UDC Endpoint 1 (IN)
Control/Status Register */
+#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN)
Control/Status Register */
+#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN)
Control/Status Register */
+

+#define UDCCS_BI_TFS        (1 << 0)    /* Transmit FIFO service */
+#define UDCCS_BI_TPC        (1 << 1)    /* Transmit packet complete */
+#define UDCCS_BI_FTF        (1 << 8)    /* Flush Tx FIFO */
+#define UDCCS_BI_TUR        (1 << 3)    /* Transmit FIFO underrun */
+#define UDCCS_BI_SST        (1 << 4)    /* Sent stall */
+#define UDCCS_BI_FST        (1 << 5)    /* Force stall */
+#define UDCCS_BI_TSP        (1 << 7)    /* Transmit short packet */

+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2 __REG(0x40600108) /* UDC Endpoint 2
(OUT) Control/Status Register */
+#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7
(OUT) Control/Status Register */
+#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12
(OUT) Control/Status Register */
+

+#define UDCCS_BO_RFS        (1 << 0)    /* Receive FIFO service */
+#define UDCCS_BO_RPC        (1 << 1)    /* Receive packet complete */
+#define UDCCS_BO_DME        (1 << 3)    /* DMA enable */
+#define UDCCS_BO_SST        (1 << 4)    /* Sent stall */
+#define UDCCS_BO_FST        (1 << 5)    /* Force stall */
+#define UDCCS_BO_RNE        (1 << 6)    /* Receive FIFO not empty */
+#define UDCCS_BO_RSP        (1 << 7)    /* Receive short packet */

+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN)
Control/Status Register */
+#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN)
Control/Status Register */
+#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN)
Control/Status Register */
+

+#define UDCCS_II_TFS    (1 << 0)    /* Transmit FIFO service */
+#define UDCCS_II_TPC    (1 << 1)    /* Transmit packet complete */
+#define UDCCS_II_FTF    (1 << 2)    /* Flush Tx FIFO */
+#define UDCCS_II_TUR    (1 << 3)    /* Transmit FIFO underrun */
+#define UDCCS_II_TSP    (1 << 7)    /* Transmit short packet */

+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT)
Control/Status Register */
+#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT)
Control/Status Register */
+#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT)
Control/Status Register */
+

+#define UDCCS_IO_RFS    (1 << 0)    /* Receive FIFO service */
+#define UDCCS_IO_RPC    (1 << 1)    /* Receive packet complete */
+#define UDCCS_IO_ROF    (1 << 3)    /* Receive overflow */
+#define UDCCS_IO_DME    (1 << 3)    /* DMA enable */
+#define UDCCS_IO_RNE    (1 << 6)    /* Receive FIFO not empty */
+#define UDCCS_IO_RSP    (1 << 7)    /* Receive short packet */

+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt)
Control/Status Register */
+#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10
(Interrupt) Control/Status Register */
+#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15
(Interrupt) Control/Status Register */
+

+#define UDCCS_INT_TFS    (1 << 0)    /* Transmit FIFO service */
+#define UDCCS_INT_TPC    (1 << 1)    /* Transmit packet complete */
+#define UDCCS_INT_FTF    (1 << 2)    /* Flush Tx FIFO */
+#define UDCCS_INT_TUR    (1 << 3)    /* Transmit FIFO underrun */
+#define UDCCS_INT_SST    (1 << 4)    /* Sent stall */
+#define UDCCS_INT_FST    (1 << 5)    /* Force stall */
+#define UDCCS_INT_TSP    (1 << 7)    /* Transmit short packet */
+
+#define UFNRH        __REG(0x40600060)  /* UDC Frame Number Register 
High */
+#define UFNRL        __REG(0x40600014)  /* UDC Frame Number Register Low */
+#define UBCR2        __REG(0x40600208)  /* UDC Byte Count Reg 2 */
+#define UBCR4        __REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7        __REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9        __REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12        __REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14        __REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0        __REG(0x40600300)  /* UDC Endpoint 0 Data Register */
+#define UDDR1        __REG(0x40600304)  /* UDC Endpoint 1 Data Register */
+#define UDDR2        __REG(0x40600308)  /* UDC Endpoint 2 Data Register */
+#define UDDR3        __REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4        __REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5        __REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6        __REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7        __REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8        __REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9        __REG(0x40600900)  /* UDC Endpoint 9 Data Register */

+#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data
Register */
+#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data
Register */
+#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data
Register */
+#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data
Register */
+#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data
Register */
+#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data
Register */
+
+#define UICR0 __REG(0x40600004) /* UDC Interrupt Control
Register 0 */
+

+#define UICR0_IM0    (1 << 0)    /* Interrupt mask ep 0 */
+#define UICR0_IM1    (1 << 1)    /* Interrupt mask ep 1 */
+#define UICR0_IM2    (1 << 2)    /* Interrupt mask ep 2 */
+#define UICR0_IM3    (1 << 3)    /* Interrupt mask ep 3 */
+#define UICR0_IM4    (1 << 4)    /* Interrupt mask ep 4 */
+#define UICR0_IM5    (1 << 5)    /* Interrupt mask ep 5 */
+#define UICR0_IM6    (1 << 6)    /* Interrupt mask ep 6 */
+#define UICR0_IM7    (1 << 7)    /* Interrupt mask ep 7 */

+
+#define UICR1 __REG(0x40600008) /* UDC Interrupt Control
Register 1 */
+

+#define UICR1_IM8    (1 << 0)    /* Interrupt mask ep 8 */
+#define UICR1_IM9    (1 << 1)    /* Interrupt mask ep 9 */
+#define UICR1_IM10    (1 << 2)    /* Interrupt mask ep 10 */
+#define UICR1_IM11    (1 << 3)    /* Interrupt mask ep 11 */
+#define UICR1_IM12    (1 << 4)    /* Interrupt mask ep 12 */
+#define UICR1_IM13    (1 << 5)    /* Interrupt mask ep 13 */
+#define UICR1_IM14    (1 << 6)    /* Interrupt mask ep 14 */
+#define UICR1_IM15    (1 << 7)    /* Interrupt mask ep 15 */

+
+#define USIR0 __REG(0x4060000C) /* UDC Status Interrupt
Register 0 */
+

+#define USIR0_IR0    (1 << 0)    /* Interrup request ep 0 */
+#define USIR0_IR1    (1 << 2)    /* Interrup request ep 1 */
+#define USIR0_IR2    (1 << 4)    /* Interrup request ep 2 */
+#define USIR0_IR3    (1 << 3)    /* Interrup request ep 3 */
+#define USIR0_IR4    (1 << 4)    /* Interrup request ep 4 */
+#define USIR0_IR5    (1 << 5)    /* Interrup request ep 5 */
+#define USIR0_IR6    (1 << 6)    /* Interrup request ep 6 */
+#define USIR0_IR7    (1 << 7)    /* Interrup request ep 7 */

+
+#define USIR1 __REG(0x40600010) /* UDC Status Interrupt
Register 1 */
+

+#define USIR1_IR8    (1 << 0)    /* Interrup request ep 8 */
+#define USIR1_IR9    (1 << 1)    /* Interrup request ep 9 */
+#define USIR1_IR10    (1 << 2)    /* Interrup request ep 10 */
+#define USIR1_IR11    (1 << 3)    /* Interrup request ep 11 */
+#define USIR1_IR12    (1 << 4)    /* Interrup request ep 12 */
+#define USIR1_IR13    (1 << 5)    /* Interrup request ep 13 */
+#define USIR1_IR14    (1 << 6)    /* Interrup request ep 14 */
+#define USIR1_IR15    (1 << 7)    /* Interrup request ep 15 */
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN        (1 << 31)    /* On-the-Go Enable */
+#define UDCCR_AALTHNP    (1 << 30)    /* A-device Alternate Host 

Negotiation Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation
Protocol Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation
Protocol Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration
Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate
Interface Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to
Active Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
Error */

+#define UDCCR_UDR        (1 << 2)    /* UDC Resume */
+#define UDCCR_UDA        (1 << 1)    /* UDC Active */
+#define UDCCR_UDE        (1 << 0)    /* UDC Enable */

+
+#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control
Register0 */
+#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control
Register1 */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */

+#define UDCICR1_IERU    (1 << 29)    /* IntEn - Resume */
+#define UDCICR1_IESU    (1 << 28)    /* IntEn - Suspend */
+#define UDCICR1_IERS    (1 << 27)    /* IntEn - Reset */

+
+#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status
Register 0 */
+#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status
Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */

+#define UDCISR1_IRRU    (1 << 29)    /* IntEn - Resume */
+#define UDCISR1_IRSU    (1 << 28)    /* IntEn - Suspend */
+#define UDCISR1_IRRS    (1 << 27)    /* IntEn - Reset */

+
+
+#define UDCFNR __REG(0x40600014) /* UDC Frame Number
Register */
+#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go
interrupt control */
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command
recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever
Interrupt Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever
Interrupt Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising
Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling
Edge Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising
Edge Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling
Edge Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising
Edge Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling
Edge Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect
Rising Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect
Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling
Edge Interrupt Enable */
+
+#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
+#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status
register - Endpoint 0 */
+
+#define UDCCSR0_SA (1 << 7) /* Setup Active */

+#define UDCCSR0_RNE    (1 << 6)    /* Receive FIFO Not Empty */
+#define UDCCSR0_FST    (1 << 5)    /* Force Stall */
+#define UDCCSR0_SST    (1 << 4)    /* Sent Stall */
+#define UDCCSR0_DME    (1 << 3)    /* DMA Enable */
+#define UDCCSR0_FTF    (1 << 2)    /* Flush Transmit FIFO */
+#define UDCCSR0_IPR    (1 << 1)    /* IN Packet Ready */
+#define UDCCSR0_OPC    (1 << 0)    /* OUT Packet Complete */

+
+#define UDCCSRA __REG(0x40600104) /* UDC Control/Status
register - Endpoint A */
+#define UDCCSRB __REG(0x40600108) /* UDC Control/Status
register - Endpoint B */
+#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status
register - Endpoint C */
+#define UDCCSRD __REG(0x40600110) /* UDC Control/Status
register - Endpoint D */
+#define UDCCSRE __REG(0x40600114) /* UDC Control/Status
register - Endpoint E */
+#define UDCCSRF __REG(0x40600118) /* UDC Control/Status
register - Endpoint F */
+#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status
register - Endpoint G */
+#define UDCCSRH __REG(0x40600120) /* UDC Control/Status
register - Endpoint H */
+#define UDCCSRI __REG(0x40600124) /* UDC Control/Status
register - Endpoint I */
+#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status
register - Endpoint J */
+#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status
register - Endpoint K */
+#define UDCCSRL __REG(0x40600130) /* UDC Control/Status
register - Endpoint L */
+#define UDCCSRM __REG(0x40600134) /* UDC Control/Status
register - Endpoint M */
+#define UDCCSRN __REG(0x40600138) /* UDC Control/Status
register - Endpoint N */
+#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status
register - Endpoint P */
+#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status
register - Endpoint Q */
+#define UDCCSRR __REG(0x40600144) /* UDC Control/Status
register - Endpoint R */
+#define UDCCSRS __REG(0x40600148) /* UDC Control/Status
register - Endpoint S */
+#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status
register - Endpoint T */
+#define UDCCSRU __REG(0x40600150) /* UDC Control/Status
register - Endpoint U */
+#define UDCCSRV __REG(0x40600154) /* UDC Control/Status
register - Endpoint V */
+#define UDCCSRW __REG(0x40600158) /* UDC Control/Status
register - Endpoint W */
+#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status
register - Endpoint X */
+

+#define UDCCSR_DPE    (1 << 9)    /* Data Packet Error */
+#define UDCCSR_FEF    (1 << 8)    /* Flush Endpoint FIFO */
+#define UDCCSR_SP    (1 << 7)    /* Short Packet Control/Status */
+#define UDCCSR_BNE    (1 << 6)    /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF    (1 << 6)    /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST    (1 << 5)    /* Force STALL */
+#define UDCCSR_SST    (1 << 4)    /* Sent STALL */
+#define UDCCSR_DME    (1 << 3)    /* DMA Enable */
+#define UDCCSR_TRN    (1 << 2)    /* Tx/Rx NAK */
+#define UDCCSR_PC    (1 << 1)    /* Packet Complete */
+#define UDCCSR_FS    (1 << 0)    /* FIFO needs service */
+
+#define UDCBCN(x)    __REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */

+
+#define UDCDN(x) __REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
+#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))

+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */

+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S (25)
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S (22)
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S (19)
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S (15)
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S (13)
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S (2)

+#define UDCCONR_DE        (1 << 1)    /* Double Buffering Enable */
+#define UDCCONR_EE        (1 << 0)    /* Endpoint Enable */

+
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDC_FNR_MASK (0x7ff)
+
+#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK (0x3ff)
+
+#endif /* __PXA27X_UDC_REGS_H */

drivers/usb/usbdcore_pxa27x.c new file +75 -0

75 lines not on this page · raw message

from the
+ * URB is written to the tx FIFO.
+ * The total amount of data in the urb is given by urb->actual_length.
+ * The maximum amount of data that can be sent in any one packet is given by
+ * endpoint->tx_packetSize.
+ * The number of data bytes from this URB that have already been transmitted
+ * is given by endpoint->sent.
+ * endpoint->last is updated by this routine with the number of data bytes
+ * transmitted in this packet.
+ */
+static int udc_write_urb(struct usb_endpoint_instance *endpoint) +{
+ struct urb *urb = endpoint->tx_urb;
+ int ep_num = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
+
+ u32 *addr32 = (u32 *) &UDCDN(ep_num),

+        *data32 = (u32 *) urb->buffer;
+    u8  *addr8 = (u8 *) &UDCDN(ep_num),
+        *data8 = (u8 *) urb->buffer;

+ unsigned int i, n, w, b, is_short;
+ int timeout = 2000; /* 2ms */
+
+ if (!urb || !urb->actual_length)
+ return -1;
+
+ n = MIN(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
+ if (n <= 0)
+ return -1;
+
+ usbdbg("write urb on ep %d", ep_num);
+#if defined(USBDDBG) && defined(USBDPARANOIA)
+ usbdbg("urb: buf %p, buf_len %d, actual_len %d",
+ urb->buffer, urb->buffer_length, urb->actual_length);
+ usbdbg("endpoint: sent %d, tx_packetSize %d, last %d",
+ endpoint->sent, endpoint->tx_packetSize, endpoint->last);
+#endif
+

+    is_short = n != endpoint->tx_packetSize;
+    w = n / 4;
+    b = n % 4;
+    usbdbg("n %d%s w %d b %d", n, is_short ? "-s" : "", w, b);
+    udc_dump_buffer("urb write", data8 + endpoint->sent, n);
+    /* Prepare for data send */

+
+ if (ep_num)
+ UDCCSN(ep_num) = UDCCSR_PC;
+
+ for (i = 0; i < w; i++)
+ *addr32 = data32[endpoint->sent/4 + i];
+ for (i = 0; i < b; i++)
+ *addr8 = data8[endpoint->sent + w*4 + i];
+
+ /* Set "Packet Complete" if less data then tx_packetSize */
+ if (is_short)
+ UDCCSN(ep_num) = ep_num ? UDCCSR_SP : UDCCSR0_IPR;
+
+ /* Wait for data sent */
+ while (!(UDCCSN(ep_num) & (ep_num ? UDCCSR_PC : UDCCSR0_IPR))) {
+ if (ep_num) {
+ if (timeout-- == 0)
+ return -1;
+ else
+ udelay(1);
+ };
+ }
+ endpoint->last = n;
+
+ if(ep_num) {
+ usbd_tx_complete(endpoint);
+ } else {
+ endpoint->sent += n;
+ endpoint->last -= n;
+ }
+
+ if( (endpoint->tx_urb->actual_length - endpoint->sent) <= 0 ) {

+        urb->actual_length = 0;
+        endpoint->sent = 0;
+        endpoint->last = 0;

+ }
+
+ if ((endpoint->sent >= urb->actual_length) && (!ep_num)) {
+ usbdbg("ep0 IN stage done");
+ if(is_short)
+ ep0state = EP0_IDLE;
+ else
+ ep0state = EP0_XFER_COMPLETE;
+ }
+
+ return 0;
+}
+
+static int udc_read_urb(struct usb_endpoint_instance *endpoint) +{

+    struct urb *urb = endpoint->rcv_urb;
+    int ep_num = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
+    u32 *addr32 = (u32 *) &UDCDN(ep_num),

+ *data32 = (u32 *) urb->buffer;
+ unsigned int i, n, is_short ;
+
+ usbdbg("read urb on ep %d", ep_num);
+#if defined(USBDDBG) && defined(USBDPARANOIA)
+ usbdbg("urb: buf %p, buf_len %d, actual_len %d",
+ urb->buffer, urb->buffer_length, urb->actual_length);
+ usbdbg("endpoint: rcv_packetSize %d",
+ endpoint->rcv_packetSize);
+#endif
+
+ if (UDCCSN(ep_num) & UDCCSR_BNE)
+ n = UDCBCN(ep_num) & 0x3ff;
+ else /* zlp */
+ n = 0;
+ is_short = n != endpoint->rcv_packetSize;
+
+ usbdbg("n %d%s", n, is_short ? "-s" : "");
+ for (i = 0; i < n; i += 4)
+ data32[urb->actual_length/4 + i/4] = *addr32;
+
+ udc_dump_buffer("urb read", (u8 *) data32, urb->actual_length + n);
+
+ usbd_rcv_complete(endpoint, n, 0);
+
+ return 0;
+}
+
+static int udc_read_urb_ep0(void)
+{
+ u32 *addr32 = (u32 *) &UDCDN(0),

+        *data32 = (u32 *) ep0_urb->buffer;
+    u8  *addr8 = (u8 *) &UDCDN(0),
+        *data8 = (u8 *) ep0_urb->buffer;
+    unsigned int i, n, w, b;
+
+    n = UDCBCR0;
+    w = n / 4;
+    b = n % 4;

+
+ for (i = 0; i < w; i++) {
+ data32[ep0_urb->actual_length/4 + i] = *addr32;
+ ep0_urb->actual_length += 4;
+ }
+
+ for (i = 0; i < b; i++ ) {
+ data8[ep0_urb->actual_length + w*4 + i] = *addr8;
+ ep0_urb->actual_length++;
+ }
+
+ UDCCSR0 = UDCCSR0_OPC | UDCCSR0_IPR;
+ if(ep0_urb->actual_length == ep0_urb->device_request.wLength)
+ return 1;
+ return 0;
+}
+
+static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) +{

+    u32 udccsr0 = UDCCSR0;
+    u32 *data = (u32 *) &ep0_urb->device_request;
+    int i;

+
+ usbdbg("udccsr0 %x", udccsr0);
+
+ /* Clear stall status */
+ if (udccsr0 & UDCCSR0_SST) {

+        usberr("clear stall status");
+        UDCCSR0 = UDCCSR0_SST;
+        ep0state = EP0_IDLE;

+ }
+
+ /* previous request unfinished? non-error iff back-to-back ... */
+ if ((udccsr0 & UDCCSR0_SA) != 0 && ep0state != EP0_IDLE)
+ ep0state = EP0_IDLE;
+
+ switch (ep0state) {
+ case EP0_IDLE :
+

+            udccsr0 = UDCCSR0;
+            /* Start control request? */
+            if ((udccsr0 & (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE))

+ == (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)) {
+
+ /* Read SETUP packet.
+ * SETUP packet size is 8 bytes (aka 2 words)
+ */

+                usbdbg("try reading SETUP packet");
+                for (i = 0; i < 2; i++) {
+                if ((UDCCSR0 & UDCCSR0_RNE) == 0) {

+ usberr("setup packet too short (%d)", i);
+ goto stall;
+ }
+ data[i] = UDCDR0;

+            }
+            UDCCSR0 |= (UDCCSR0_OPC | UDCCSR0_SA);
+            if ((UDCCSR0 & UDCCSR0_RNE) != 0) {

+ usberr("setup packet too long");
+ goto stall;
+ }
+
+ udc_dump_buffer("ep0 setup read", (u8 *) data, 8);
+
+ if(ep0_urb->device_request.wLength == 0) {
+
+ usbdbg("Zero Data control Packet\n");
+
+ if(ep0_recv_setup(ep0_urb)) {

+                    usberr("Invalid Setup Packet\n");
+                    udc_dump_buffer("ep0 setup read", (u8 *) data, 8);
+                    goto stall;
+                }
+                UDCCSR0 = UDCCSR0_IPR;
+                ep0state = EP0_IDLE;

+ }
+ else {
+ /* Check direction */
+ if ((ep0_urb->device_request.bmRequestType

+                    & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
+                    ep0state = EP0_OUT_DATA;
+                    ep0_urb->buffer = (u8 *)ep0_urb->buffer_data;
+                    ep0_urb->buffer_length = sizeof(ep0_urb->buffer_data);
+                    ep0_urb->actual_length = 0;
+                    UDCCSR0 = UDCCSR0_IPR;
+                }
+                else {
+                    /* The ep0_recv_setup function has already placed our
+                     * response packet data in ep0_urb->buffer and the
+                     * packet length in ep0_urb->actual_length.
+                     */
+                    if (ep0_recv_setup(ep0_urb)) {
+stall:
+                        usberr("Invalid setup packet");
+                        udc_dump_buffer("ep0 setup read", (u8 *) data, 8);
+                        ep0state= EP0_IDLE;
+                        UDCCSR0 = UDCCSR0_SA|UDCCSR0_OPC | UDCCSR0_FST 

| UDCCS0_FTF;
+ return;
+ }
+

+                    endpoint->tx_urb = ep0_urb;
+                    endpoint->sent = 0;
+                    usbdbg("EP0_IN_DATA");
+                    ep0state = EP0_IN_DATA;
+                    if(udc_write_urb(endpoint) < 0)

+ goto stall;
+
+ }
+ }
+ return;
+ }
+ else if ((udccsr0 & (UDCCSR0_OPC |UDCCSR0_SA))

+            == (UDCCSR0_OPC|UDCCSR0_SA)) {
+            usberr("Setup Active but no data. Stalling ....\n");
+            goto stall;

+ }
+ else {
+ usbdbg("random early IRQs");
+ /* Some random early IRQs:

+             * - we acked FST
+             * - IPR cleared
+             * - OPC got set, without SA (likely status stage)
+             */

+ UDCCSR0 = udccsr0 & (UDCCSR0_SA | UDCCSR0_OPC);
+
+ }
+ break;
+
+ case EP0_OUT_DATA :
+
+ if ((udccsr0 & UDCCSR0_OPC) && !(udccsr0 & UDCCSR0_SA)) {
+ if(udc_read_urb_ep0()) {
+read_complete:
+ ep0state = EP0_IDLE;
+ if (ep0_recv_setup(ep0_urb)) {
+ /* Not a setup packet, stall next EP0
transaction */

+                        udc_dump_buffer("ep0 setup read", (u8 *) data, 8);
+                        usberr("can't parse setup packet\n");
+                        goto stall;

+ }
+ }
+ }
+ else if(!(udccsr0 & UDCCSR0_OPC) && !(udccsr0 & UDCCSR0_IPR)) {
+ if(ep0_urb->device_request.wLength ==
ep0_urb->actual_length)
+ goto read_complete;
+ usberr("Premature Status\n");
+ ep0state = EP0_IDLE;
+ }
+ break;
+
+ case EP0_IN_DATA :
+ /* GET_DESCRIPTOR etc */
+ if (udccsr0 & UDCCSR0_OPC) {

+                UDCCSR0 = UDCCSR0_OPC | UDCCSR0_FTF;
+                usberr("ep0in premature status");
+                ep0state = EP0_IDLE;

+ }
+ else {
+ /* irq was IPR clearing */
+ if(udc_write_urb(endpoint) < 0) {
+ usberr("ep0_write_error\n");
+ goto stall;
+ }
+ }
+ break;
+
+ case EP0_XFER_COMPLETE:

+            UDCCSR0 = UDCCSR0_IPR;
+            ep0state = EP0_IDLE;
+            break;

+
+ default:
+ usbdbg("Default\n");
+ }
+ USIR0 = USIR0_IR0;
+}
+
+static void udc_handle_ep(struct usb_endpoint_instance *endpoint) +{

+    int ep_addr = endpoint->endpoint_address;
+    int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+    int ep_isout = (ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT;

+
+ u32 flags = UDCCSN(ep_num) & (UDCCSR_SST | UDCCSR_TRN);
+ if (flags)
+ UDCCSN(ep_num) = flags;
+
+ if (ep_isout)
+ udc_read_urb(endpoint);
+ else
+ udc_write_urb(endpoint);
+
+ UDCCSN(ep_num) = UDCCSR_PC;
+}
+
+static void udc_state_changed(void)
+{
+ int config, interface, alternate;
+
+ UDCCR |= UDCCR_SMAC;
+

+    config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S;
+    interface =  (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S;
+    alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S;

+
+ usbdbg("New UDC settings are: conf %d - inter %d - alter %d",
+ config, interface, alternate);
+
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, 0);
+
+ UDCISR1 = UDCISR1_IRCC;
+}
+
+
+
+void udc_irq(void)
+{

+    int            handled;
+    struct usb_endpoint_instance *endpoint;
+    int ep_num, i;
+    u32 udcisr0;
+
+    do {
+        handled = 0;
+        /* Suspend Interrupt Request */
+        if (USIR1 & UDCCR_SUSIR) {
+
+            usbdbg("Suspend\n");
+            udc_ack_int_UDCCR(UDCCR_SUSIR);
+            handled = 1;
+            ep0state = EP0_IDLE;

+ }
+
+ /* Resume Interrupt Request */
+ if (USIR1 & UDCCR_RESIR) {

+            udc_ack_int_UDCCR(UDCCR_RESIR);
+            handled = 1;
+            usbdbg( "USB resume\n");

+
+ }
+
+ if (USIR1 & (1<<31) ){
+ handled=1;
+ udc_state_changed();
+ }
+
+ /* Reset Interrupt Request */
+ if (USIR1 & UDCCR_RSTIR) {

+            udc_ack_int_UDCCR(UDCCR_RSTIR);
+            handled = 1;
+            usbdbg("Reset\n");
+            usbd_device_event_irq(udc_device, DEVICE_RESET, 0);

+ } else {
+ if(USIR0)
+ usbdbg("UISR0: %x \n",USIR0);
+
+ if (USIR0 & 0x2) USIR0 = 0x2;
+
+ /* Control traffic */
+ if (USIR0 & USIR0_IR0) {

+                handled = 1;
+                udc_handle_ep0(udc_device->bus->endpoint_array);
+                USIR0 = USIR0_IR0;

+ }
+
+ endpoint = udc_device->bus->endpoint_array;
+ for (i = 0; i < udc_device->bus->max_endpoints; i++) {
+ ep_num = (endpoint[i].endpoint_address) &
USB_ENDPOINT_NUMBER_MASK;
+ if (!ep_num)
+ continue;
+ udcisr0 = UDCISR0;
+ if (udcisr0 & UDCISR_INT(ep_num, UDC_INT_PACKETCMP)) {
+ UDCISR0 = UDCISR_INT(ep_num, UDC_INT_PACKETCMP);
+ udc_handle_ep(&endpoint[i]);
+
+ }
+ }
+
+ }
+
+ } while (handled);
+}
+
+/* The UDCCR reg contains mask and interrupt status bits,
+ * so using '|=' isn't safe as it may ack an interrupt.
+ */
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE)
+
+static inline void udc_set_mask_UDCCR(int mask)
+{
+ UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
+}
+
+static inline void udc_clear_mask_UDCCR(int mask)
+{
+ UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
+}
+
+
+static void pio_irq_enable(int ep_num)
+{
+ if (ep_num < 16)
+ UDCICR0 |= 3 << (ep_num * 2);
+ else {
+ ep_num -= 16;
+ UDCICR1 |= 3 << (ep_num * 2);
+ }
+}
+
+/*
+ * udc_set_nak
+ *
+ * Allow upper layers to signal lower layers should not accept more RX data
+ */
+void udc_set_nak(int ep_num)
+{
+ /* TODO */
+}
+
+/*
+ * udc_unset_nak
+ *
+ * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
+ * Switch off NAKing on this endpoint to accept more data output from host.
+ */
+void udc_unset_nak(int ep_num)
+{
+ /* TODO */
+}
+
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint) +{
+ return udc_write_urb(endpoint);
+}
+
+/* Associate a physical endpoint with endpoint instance */ +void udc_setup_ep(struct usb_device_instance *device, unsigned int id, struct usb_endpoint_instance *endpoint)
+{

+    int ep_num, ep_addr, ep_isout, ep_type, ep_size;
+    int config, interface, alternate;
+    u32 tmp;

+
+ usbdbg("setting up endpoint id %d", id);
+
+ if (!endpoint) {
+ usberr("endpoint void!");
+ return;
+ }
+
+ ep_num = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
+ if (ep_num >= UDC_MAX_ENDPOINTS) {
+ usberr("unable to setup ep %d!",ep_num);
+ return;
+ }
+
+ pio_irq_enable(ep_num);
+ if (ep_num == 0) {
+ /* Done for ep0 */
+ return;
+ }
+

+    config = 1;
+    interface = 0;
+    alternate = 0;

+
+ usbdbg("config %d - interface %d - alternate %d",
+ config, interface, alternate);
+

+    ep_addr = endpoint->endpoint_address;
+    ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+    ep_isout = (ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT;
+    ep_type = ep_isout ? endpoint->rcv_attributes : 

endpoint->tx_attributes;
+ ep_size = ep_isout ? endpoint->rcv_packetSize :
endpoint->tx_packetSize;
+
+ usbdbg("addr %x, num %d, dir %s, type %s, packet size %d",

+        ep_addr, ep_num,
+        ep_isout ? "out" : "in",
+        ep_type == USB_ENDPOINT_XFER_ISOC ? "isoc" :

+ ep_type == USB_ENDPOINT_XFER_BULK ? "bulk" :
+ ep_type == USB_ENDPOINT_XFER_INT ? "int" : "???",
+ ep_size
+ );
+

+    /* Configure UDCCRx */
+    tmp = 0;
+    tmp |= (config << UDCCONR_CN_S) & UDCCONR_CN;
+    tmp |= (interface << UDCCONR_IN_S) & UDCCONR_IN;
+    tmp |= (alternate << UDCCONR_AISN_S) & UDCCONR_AISN;
+    tmp |= (ep_num << UDCCONR_EN_S) & UDCCONR_EN;
+    tmp |= (ep_type << UDCCONR_ET_S) & UDCCONR_ET;
+    tmp |= ep_isout ? 0 : UDCCONR_ED;
+    tmp |= (ep_size << UDCCONR_MPS_S ) & UDCCONR_MPS;
+    tmp |= /* UDCCONR_DE | */ UDCCONR_EE;

+
+ UDCCN(ep_num) = tmp;
+
+ usbdbg("UDCCR%c = %x", 'A' + ep_num-1, UDCCN(ep_num));
+ usbdbg("UDCCSR%c = %x", 'A' + ep_num-1, UDCCSN(ep_num));
+}
+
+
+
+#define CONFIG_USB_DEV_PULLUP_GPIO 87
+
+/* Connect the USB device to the bus */
+void udc_connect(void)
+{
+ usbdbg("UDC connect");
+

+    /* Turn on the USB connection by enabling the pullup resistor */
+    set_GPIO_mode(CONFIG_USB_DEV_PULLUP_GPIO | GPIO_OUT);
+    GPSR(CONFIG_USB_DEV_PULLUP_GPIO) = 

GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO);
+}
+
+/* Disconnect the USB device to the bus */ +void udc_disconnect(void)
+{
+ usbdbg("UDC disconnect");
+
+ /* Turn off the USB connection by disabling the pullup resistor */
+ GPCR(CONFIG_USB_DEV_PULLUP_GPIO) =
GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO);
+}
+
+/* Switch on the UDC */
+void udc_enable(struct usb_device_instance *device) +{
+
+ ep0state = EP0_IDLE;
+ CKEN |= CKEN11_USB;
+

+    /* enable endpoint 0, A, B's Packet Complete Interrupt. */
+    UDCICR0 = 0x0000003f;
+    UDCICR1 = 0xa8000000;
+
+    /* clear the interrupt status/control registers */
+    UDCISR0 = 0xffffffff;
+    UDCISR1 = 0xffffffff;

+
+ /* set UDC-enable */
+ udc_set_mask_UDCCR( UDCCR_UDE);
+
+ udc_device = device;
+ if (!ep0_urb)
+ ep0_urb =
usbd_alloc_urb(udc_device,udc_device->bus->endpoint_array);
+ else
+ usbinfo("ep0_urb %p already allocated", ep0_urb);
+
+ usbdbg("UDC Enabled\n");
+}
+
+/* Need to check this again */
+void udc_disable(void)
+{
+ usbdbg("disable UDC");
+
+ udc_clear_mask_UDCCR(UDCCR_UDE);
+
+ /* Disable clock for USB device */
+ CKEN &= ~CKEN11_USB;
+
+ /* Free ep0 URB */
+ if (ep0_urb) {
+ usbd_dealloc_urb(ep0_urb);
+ ep0_urb = NULL;
+ }
+
+ /* Reset device pointer */
+ udc_device = NULL;
+}
+
+/* Allow udc code to do any additional startup */ +void udc_startup_events(struct usb_device_instance *device) +{
+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT */
+ usbd_device_event_irq(device, DEVICE_INIT, 0);
+
+ /* The DEVICE_CREATE event puts the USB device in the state
+ * STATE_ATTACHED */
+ usbd_device_event_irq(device, DEVICE_CREATE, 0);
+
+ /* Some USB controller driver implementations signal
+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
+ * DEVICE_HUB_CONFIGURED causes a transition to the state
STATE_POWERED,
+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
+ */
+ udc_enable(device);
+}
+
+/* Initialize h/w stuff */
+int udc_init(void)
+{
+ udc_device = NULL;
+ usbdbg("PXA27x usbd start");
+
+ /* Disable the UDC */
+ udc_clear_mask_UDCCR(UDCCR_UDE);
+
+ /* Disable clock for USB device */
+ CKEN &= ~CKEN11_USB;
+
+ /* Disable IRQs: we don't use them */
+ UDCICR0 = UDCICR1 = 0;
+
+ return 0;
+}

include/usbdcore_pxa2xx.h new file +66 -0

66 lines not on this page · raw message

struct usb_endpoint_instance *endpoint);
+
+#endif

Signature · 1 line
1.5.6.3
#1 lore raw
Quoted 6 lines · Vivek Kutal

Hi all,
This is the patch for UDC support for PXA27X , it is based on a
patch previously submitted by Rodolfo Giometti.
--
Regards,
Vivek Kutal

this part go after the ---

and your email is line wrapped by your mailler

Quoted 9 lines

From 081685ce3c5b80bc439485ec8e1847d85dc7ad70 Mon Sep 17 00:00:00 2001
From: Vivek Kutal <[email protected]>
Date: Thu, 19 Feb 2009 17:56:38 +0530
Subject: [PATCH] Support for PXA27X UDC.

---

here

Quoted 4 lines
 drivers/usb/Makefile          |    1 +
 drivers/usb/pxa27x_udc_regs.h |  417 ++++++++++++++++++++++++
 drivers/usb/usbdcore_pxa27x.c |  714 

+++++++++++++++++++++++++++++++++++++++++

Best Regards,
J.

#2 lore raw
In reply to Vivek Kutal
Quoted 8 lines · Vivek Kutal

Hi all,
This is the patch for UDC support for PXA27X , it is based on a
patch previously submitted by Rodolfo Giometti.
--
Regards,
Vivek Kutal

Quoted 6 lines

From 081685ce3c5b80bc439485ec8e1847d85dc7ad70 Mon Sep 17 00:00:00 2001
From: Vivek Kutal <[email protected]>
Date: Thu, 19 Feb 2009 17:56:38 +0530
Subject: [PATCH] Support for PXA27X UDC.

Quoted 10 lines

---

drivers/usb/Makefile          |    1 +
drivers/usb/pxa27x_udc_regs.h |  417 ++++++++++++++++++++++++
drivers/usb/usbdcore_pxa27x.c |  714  
+++++++++++++++++++++++++++++++++++++++++
include/usbdcore_pxa2xx.h     |   68 ++++
4 files changed, 1200 insertions(+), 0 deletions(-)

create mode 100644 drivers/usb/pxa27x_udc_regs.h
create mode 100644 drivers/usb/usbdcore_pxa27x.c
create mode 100644 include/usbdcore_pxa2xx.h

On my old patch I had to modify also usbtty code in order to have a (quasi) functional driver. Did you resolve this issue without modify it?

Ciao,

Rodolfo

Signature · 11 lines
GNU/Linux Solutions                  e-mail: giometti at enneenne.com
Linux Device Driver                          giometti at linux.it
Embedded Systems                     phone:  +39 349 2432127
UNIX programming                     skype:  rodolfo.giometti
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090221/c0c27a5c/attachment.pgp 
#3 lore raw
Quoted 4 lines · Rodolfo Giometti

On my old patch I had to modify also usbtty code in order to have a (quasi) functional driver. Did you resolve this issue without modify it?

A small change has to be done in usbtty.c to use the correct endpoint
number , I will send out a separate patch for this fix, also I just
noticed that some macros are getting redefined in drivers/usb/pxa27x_udc_regs.h , I'll try to merge this file with include/asm-arm/arch-pxa/pxa-regs.h and send a updated patch. I have tested this driver with usbtty & usb dfu , it works without any problems in both cases.

--
Regards
Vivek Kutal