Skip to contentSkip to conversation

ALSA: hdsp - poll for iobox

PATCH In review Tim Blechmann 2 participants 2 messages Feb 20, 2009 – Feb 23, 2009 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: hdsp - poll for iobox

sleeping for 2 seconds before checking for the iobox is not enough on some systems.
this patch increases the timeout, but polls the card during that time. it thus speeds up the module loading when the card has already been initialized, while being more robust on systems, which require a higher timeout than the predefined 2 seconds.

---
 sound/pci/rme9652/hdsp.c |   26 ++++++++++++++++++++++----
 1 files changed, 22 insertions(+), 4 deletions(-)
sound/pci/rme9652/hdsp.c +22 -4
index 44d0c15..a586a80 100644
@@ -653,7 +653,6 @@ static unsigned int hdsp_read(struct hdsp *hdsp, int reg)
 
 static int hdsp_check_for_iobox (struct hdsp *hdsp)
 {
-
 	if (hdsp->io_type == H9652 || hdsp->io_type == H9632) return 0;
 	if (hdsp_read (hdsp, HDSP_statusRegister) & HDSP_ConfigError) {
 		snd_printk ("Hammerfall-DSP: no Digiface or Multiface connected!\n");
@@ -661,7 +660,27 @@ static int hdsp_check_for_iobox (struct hdsp *hdsp)
 		return -EIO;
 	}
 	return 0;
+}
 
+static int hdsp_wait_for_iobox (struct hdsp *hdsp, unsigned int loops, unsigned int delay)
+{
+	unsigned int i;
+
+	if (hdsp->io_type == H9652 || hdsp->io_type == H9632)
+		return 0;
+
+	for (i = 0; i != loops; ++i) {
+		if (hdsp_read (hdsp, HDSP_statusRegister) & HDSP_ConfigError)
+			msleep(delay);
+		else {
+			snd_printd ("Hammerfall-DSP: iobox found after %ums!\n", i * delay);
+			return 0;
+		}
+	}
+
+	snd_printk ("Hammerfall-DSP: no Digiface or Multiface connected!\n");
+	hdsp->state &= ~HDSP_FirmwareLoaded;
+	return -EIO;
 }
 
 static int snd_hdsp_load_firmware_from_cache(struct hdsp *hdsp) {
@@ -5055,10 +5074,9 @@ static int __devinit snd_hdsp_create(struct snd_card *card,
 		return err;
 	
 	if (!is_9652 && !is_9632) {
-		/* we wait 2 seconds to let freshly inserted cardbus cards do their hardware init */
-		ssleep(2);
+		/* we wait a maximum of 10 seconds to let freshly inserted cardbus cards do their hardware init */
+		err = hdsp_wait_for_iobox(hdsp, 1000, 10);
 
-		err = hdsp_check_for_iobox(hdsp);
 		if (err < 0)
 			return err;
 
Signature · 1 line
1.6.1.2
#1 lore raw

At Fri, 20 Feb 2009 19:30:35 +0100,

Quoted 9 lines · Tim Blechmann

sleeping for 2 seconds before checking for the iobox is not enough on some systems.
this patch increases the timeout, but polls the card during that time. it thus speeds up the module loading when the card has already been initialized, while being more robust on systems, which require a higher timeout than the predefined 2 seconds.

Applied both patches. I fixed a few coding issues with the first one.

Thanks.

Takashi