hw_random: add timeriomem-rng driver
PATCH v3 1/1 hw_random: add timeriomem-rng driver
Some hardware platforms, the TS-7800[1] is one for example, can supply the kernel with an entropy source, albeit a slow one for TS-7800 users, by just reading a particular IO address. This source must not be read above a certain rate otherwise the quality suffers.
The driver is then hooked into by calling platform_device_(register|add|del) passing a structure similar to:
------
static struct timeriomem_rng_data ts78xx_ts_rng_data = {
.address = (u32 *__iomem) TS_RNG,
.period = 1000000, /* one second */
};static struct platform_device ts78xx_ts_rng_device = {
.name = "timeriomem_rng",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_rng_data,
},
.num_resources = 0,
};------
[1] http://www.embeddedarm.com/products/board-detail.php?product=TS-7800
drivers/char/hw_random/Kconfig +14 -0
@@ -20,6 +20,20 @@ config HW_RANDOM If unsure, say Y. +config HW_RANDOM_TIMERIOMEM + tristate "Timer IOMEM HW Random Number Generator support" + depends on HW_RANDOM + ---help--- + This driver provides kernel-side support for a generic Random + Number Generator used by reading a 'dumb' iomem address that + is to be read no faster than, for example, once a second; + the default FPGA bitstream on the TS-7800 has such functionality. + + To compile this driver as a module, choose M here: the + module will be called timeriomem-rng. + + If unsure, say Y. + config HW_RANDOM_INTEL tristate "Intel HW Random Number Generator support" depends on HW_RANDOM && (X86 || IA64) && PCI
drivers/char/hw_random/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_HW_RANDOM) += rng-core.o rng-core-y := core.o +obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
drivers/char/hw_random/timeriomem-rng.c new file +151 -0
151 lines not on this page · raw message
include/linux/timeriomem-rng.h new file +21 -0
@@ -0,0 +1,21 @@ +/* +* linux/include/linux/timeriomem-rng.h +* +* Copyright (c) 2009 Alexander Clouter <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/completion.h> + +struct timeriomem_rng_data { +struct completion completion; +unsigned int present:1 ; + +u32 __iomem *address; + +/* measures in usecs */ +unsigned int period; +};
PATCH v3 1/1 hw_random: add timeriomem-rng driver
Some hardware platforms, the TS-7800[1] is one for example, can supply the kernel with an entropy source, albeit a slow one for TS-7800 users, by just reading a particular IO address. This source must not be read above a certain rate otherwise the quality suffers.
The driver is then hooked into by calling platform_device_(register|add|del) passing a structure similar to:
------
static struct timeriomem_rng_data ts78xx_ts_rng_data = {
.address = (u32 *__iomem) TS_RNG,
.period = 1000000, /* one second */
};static struct platform_device ts78xx_ts_rng_device = {
.name = "timeriomem_rng",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_rng_data,
},
.num_resources = 0,
};------
[1] http://www.embeddedarm.com/products/board-detail.php?product=TS-7800
----
drivers/char/hw_random/Kconfig +14 -0
@@ -20,6 +20,20 @@ config HW_RANDOM If unsure, say Y. +config HW_RANDOM_TIMERIOMEM + tristate "Timer IOMEM HW Random Number Generator support" + depends on HW_RANDOM + ---help--- + This driver provides kernel-side support for a generic Random + Number Generator used by reading a 'dumb' iomem address that + is to be read no faster than, for example, once a second; + the default FPGA bitstream on the TS-7800 has such functionality. + + To compile this driver as a module, choose M here: the + module will be called timeriomem-rng. + + If unsure, say Y. + config HW_RANDOM_INTEL tristate "Intel HW Random Number Generator support" depends on HW_RANDOM && (X86 || IA64) && PCI
drivers/char/hw_random/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_HW_RANDOM) += rng-core.o rng-core-y := core.o +obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
drivers/char/hw_random/timeriomem-rng.c new file +151 -0
151 lines not on this page · raw message
include/linux/timeriomem-rng.h new file +21 -0
@@ -0,0 +1,21 @@ +/* +* linux/include/linux/timeriomem-rng.h +* +* Copyright (c) 2009 Alexander Clouter <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/completion.h> + +struct timeriomem_rng_data { +struct completion completion; +unsigned int present:1 ; + +u32 __iomem *address; + +/* measures in usecs */ +unsigned int period; +};
Quoted 5 lines · Alexander Clouter
Some hardware platforms, the TS-7800[1] is one for example, can supply the kernel with an entropy source, albeit a slow one for TS-7800 users, by just reading a particular IO address. This source must not be read above a certain rate otherwise the quality suffers.
Applied to cryptodev. Thanks a lot!
Signature · 4 lines
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt