Skip to contentSkip to conversation

ARM Pull Request

U-Boot Applied Jean-Christophe PLAGNIOL-VILLARD 3 participants 4 messages Feb 22, 2009

lore
Share & tools
lore
#0 lore raw

Hi Wolfgang,

Please pull The following changes since commit 09fee8e8677a6265e89144ccc163bf00e321769e:
Wolfgang Denk (1):
Coding Style cleanup; update CHANGELOG

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Alessandro Rubini (3):
Added nomadik.h header
Nand driver for Nomadik SoC
Enable Ethernet for Nomadik 8815 Evaluation Kit

Dirk Behme (5):
OMAP3: Overo: Clean up pin mux and GPIO configuration
OMAP3: Beagle: Add board revision detection
OMAP3: Add OMAP3 auto detection
OMAP3: Pandora: Update pin mux
OMAP3: Clean up MMC code

Hugo Villeneuve (1):
ARM DaVinci: Add common peripherals and modules enable functions.

Jean-Christophe PLAGNIOL-VILLARD (4):
arm: add uart dcc support
davinci: fix implicit declaration of function 'davinci_errata_workarounds' nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
nmdk8815: fix onenand support

 board/davinci/common/psc.c                |   65 ++++++++
 board/davinci/common/psc.h                |    4 +
 board/davinci/dvevm/dvevm.c               |   35 +----
 board/davinci/schmoogie/schmoogie.c       |   37 ++----
 board/davinci/sffsdr/sffsdr.c             |   31 +----
 board/davinci/sonata/sonata.c             |   35 +----
 board/omap3/beagle/beagle.c               |   41 +++++
 board/omap3/beagle/beagle.h               |    3 +-
 board/omap3/evm/evm.h                     |    1 -
 board/omap3/overo/Makefile                |    1 +
 board/omap3/overo/overo.c                 |   13 --
 board/omap3/overo/overo.h                 |   19 ++-
 board/omap3/pandora/pandora.h             |   13 +-
 board/omap3/zoom1/zoom1.h                 |    1 -
 board/st/nmdk8815/nmdk8815.c              |    5 +-
 common/devices.c                          |    3 +
 cpu/arm_cortexa8/omap3/sys_info.c         |   31 ++++-
 drivers/mmc/omap3_mmc.c                   |  137 +++++++++---------
 drivers/mtd/nand/Makefile                 |    1 +
 drivers/mtd/nand/nomadik.c                |  221 ++++++++++++++++++++++++++++
 drivers/serial/Makefile                   |    1 +
 drivers/serial/arm_dcc.c                  |  226 +++++++++++++++++++++++++++++
 include/asm-arm/arch-omap3/cpu.h          |   20 +++
 include/asm-arm/arch-omap3/mmc_host_def.h |   64 +++++---
 include/asm-arm/arch-omap3/omap3.h        |    6 +-
 include/asm-arm/arch-omap3/sys_proto.h    |    1 -
 include/configs/nmdk8815.h                |   48 ++-----
 include/devices.h                         |    3 +
 include/nomadik.h                         |   39 +++++
 lib_arm/board.c                           |    3 +
 30 files changed, 842 insertions(+), 266 deletions(-)
 create mode 100644 drivers/mtd/nand/nomadik.c
 create mode 100644 drivers/serial/arm_dcc.c
 create mode 100644 include/nomadik.h

Best Regards,
J.

#1 lore raw

Dear Jean-Christophe,

Quoted 7 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi Wolfgang,

Please pull The following changes since commit 09fee8e8677a6265e89144ccc163bf00e321769e:
Wolfgang Denk (1):
Coding Style cleanup; update CHANGELOG

are available in the git repository at:

Any hint or idea when we will get a mach-types update?

Dirk

#2 lore raw

Dear Dirk,

Quoted 2 lines · In message <[email protected]> you wrote:

Any hint or idea when we will get a mach-types update?

It will be included with the v2009.03-rc1 release which will come into existence in ... less than one hour.

Keep your fingers crossed.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I used to think that the brain was the most wonderful  organ  in  my
body. Then I realized who was telling me this."        - Emo Phillips
#3 lore raw
In reply to Jean-Christophe PLAGNIOL-VILLARD

Dear Jean-Christophe PLAGNIOL-VILLARD,

Quoted 57 lines · In message <[email protected]> you wrote:

Hi Wolfgang,

Please pull The following changes since commit 09fee8e8677a6265e89144ccc163bf00e321769e:
Wolfgang Denk (1):
Coding Style cleanup; update CHANGELOG

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Alessandro Rubini (3):
Added nomadik.h header
Nand driver for Nomadik SoC
Enable Ethernet for Nomadik 8815 Evaluation Kit

Dirk Behme (5):
OMAP3: Overo: Clean up pin mux and GPIO configuration
OMAP3: Beagle: Add board revision detection
OMAP3: Add OMAP3 auto detection
OMAP3: Pandora: Update pin mux
OMAP3: Clean up MMC code

Hugo Villeneuve (1):
ARM DaVinci: Add common peripherals and modules enable functions.

Jean-Christophe PLAGNIOL-VILLARD (4):
arm: add uart dcc support
davinci: fix implicit declaration of function 'davinci_errata_workarounds' nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
nmdk8815: fix onenand support

 board/davinci/common/psc.c                |   65 ++++++++
 board/davinci/common/psc.h                |    4 +
 board/davinci/dvevm/dvevm.c               |   35 +----
 board/davinci/schmoogie/schmoogie.c       |   37 ++----
 board/davinci/sffsdr/sffsdr.c             |   31 +----
 board/davinci/sonata/sonata.c             |   35 +----
 board/omap3/beagle/beagle.c               |   41 +++++
 board/omap3/beagle/beagle.h               |    3 +-
 board/omap3/evm/evm.h                     |    1 -
 board/omap3/overo/Makefile                |    1 +
 board/omap3/overo/overo.c                 |   13 --
 board/omap3/overo/overo.h                 |   19 ++-
 board/omap3/pandora/pandora.h             |   13 +-
 board/omap3/zoom1/zoom1.h                 |    1 -
 board/st/nmdk8815/nmdk8815.c              |    5 +-
 common/devices.c                          |    3 +
 cpu/arm_cortexa8/omap3/sys_info.c         |   31 ++++-
 drivers/mmc/omap3_mmc.c                   |  137 +++++++++---------
 drivers/mtd/nand/Makefile                 |    1 +
 drivers/mtd/nand/nomadik.c                |  221 ++++++++++++++++++++++++++++
 drivers/serial/Makefile                   |    1 +
 drivers/serial/arm_dcc.c                  |  226 +++++++++++++++++++++++++++++
 include/asm-arm/arch-omap3/cpu.h          |   20 +++
 include/asm-arm/arch-omap3/mmc_host_def.h |   64 +++++---
 include/asm-arm/arch-omap3/omap3.h        |    6 +-
 include/asm-arm/arch-omap3/sys_proto.h    |    1 -
Quoted 8 lines
 include/configs/nmdk8815.h                |   48 ++-----
 include/devices.h                         |    3 +
 include/nomadik.h                         |   39 +++++
 lib_arm/board.c                           |    3 +
 30 files changed, 842 insertions(+), 266 deletions(-)
 create mode 100644 drivers/mtd/nand/nomadik.c
 create mode 100644 drivers/serial/arm_dcc.c
 create mode 100644 include/nomadik.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Quotation, n. The act of repeating erroneously the words of  another.
The  words  erroneously  repeated.
                            - Ambrose Bierce _The Devil's Dictionary_