Skip to contentSkip to conversation

Haupauge Nova-T 500 2.6.28 regression dib0700

DISCUSSION Janne Grunau 2 participants 2 messages Feb 23, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

I have some difficulties with the Hauppauge Nova-T 500 and 2.6.28 kernels.

Following USB errors appear with 2.6.28.4 every 100ms:

Feb 15 02:46:03 golem [ 7720.876132] usb 2-1: events/3 timed out on ep1in len=0/6
Feb 15 02:46:03 golem [ 7720.976039] usb 2-1: events/3 timed out on ep1in len=0/6
Feb 15 02:46:03 golem [ 7721.076068] usb 2-1: events/3 timed out on ep1in len=0/6

The device is still useable but occasionally I see the same error
with additional usb errors (iirc same kernel and config)

Feb 17 20:33:17 golem [   14.733031] ehci_hcd 0000:01:06.2: reused qh ffff8800bf80d140 schedule
Feb 17 20:33:17 golem [   14.733040] usb 2-1: link qh64-0001/ffff8800bf80d140 start 63 [2/0 us]
Feb 17 20:33:17 golem [   14.783035] usb 2-1: unlink qh64-0001/ffff8800bf80d140 start 63 [2/0 us]
Feb 17 20:33:17 golem [   14.783107] usb 2-1: events/3 timed out on ep1in len=0/6
...
Feb 17 20:34:12 golem [  128.130059] ehci_hcd 0000:01:06.2: reused qh ffff8800bf80d140 schedule
Feb 17 20:34:12 golem [  128.130069] usb 2-1: link qh64-0001/ffff8800bf80d140 start 63 [2/0 us]
Feb 17 20:34:12 golem [  128.131007] ehci_hcd 0000:01:06.2: force halt; handhake ffffc20000050014 00 

004000 00000000 -> -110

ehci gives up and the device is unuseabe.

This is still the case with 2.6.28.7.

git bisect blames following change:

| commit 99afb989b05b9fb1c7b3831ce4b7a000b214acdb
| Author: Devin Heitmueller <[email protected]>
| Date:   Sat Nov 15 07:13:07 2008 -0300
|
|     V4L/DVB (9639): Make dib0700 remote control support work with firmware v1.20

2.6.28.x with DVB drivers from v4l-dvb hg works as expected bu I fail to see which changeset fixed it. If you have an idea I'll test it. Otherwise I'll bisect v4l-dvb hg.

This should be fixed in 2.6.28-stable.

Janne

#1 lore raw
Quoted 35 lines · Janne Grunau

Hi,

I have some difficulties with the Hauppauge Nova-T 500 and 2.6.28 kernels.

Following USB errors appear with 2.6.28.4 every 100ms:

Feb 15 02:46:03 golem [ 7720.876132] usb 2-1: events/3 timed out on ep1in len=0/6
Feb 15 02:46:03 golem [ 7720.976039] usb 2-1: events/3 timed out on ep1in len=0/6
Feb 15 02:46:03 golem [ 7721.076068] usb 2-1: events/3 timed out on ep1in len=0/6

The device is still useable but occasionally I see the same error
with additional usb errors (iirc same kernel and config)

Feb 17 20:33:17 golem [   14.733031] ehci_hcd 0000:01:06.2: reused qh ffff8800bf80d140 schedule
Feb 17 20:33:17 golem [   14.733040] usb 2-1: link qh64-0001/ffff8800bf80d140 start 63 [2/0 us]
Feb 17 20:33:17 golem [   14.783035] usb 2-1: unlink qh64-0001/ffff8800bf80d140 start 63 [2/0 us]
Feb 17 20:33:17 golem [   14.783107] usb 2-1: events/3 timed out on ep1in len=0/6
...
Feb 17 20:34:12 golem [  128.130059] ehci_hcd 0000:01:06.2: reused qh ffff8800bf80d140 schedule
Feb 17 20:34:12 golem [  128.130069] usb 2-1: link qh64-0001/ffff8800bf80d140 start 63 [2/0 us]
Feb 17 20:34:12 golem [  128.131007] ehci_hcd 0000:01:06.2: force halt; handhake ffffc20000050014 00

004000 00000000 -> -110

ehci gives up and the device is unuseabe.

This is still the case with 2.6.28.7.

git bisect blames following change:

| commit 99afb989b05b9fb1c7b3831ce4b7a000b214acdb
| Author: Devin Heitmueller <[email protected]>
| Date:   Sat Nov 15 07:13:07 2008 -0300
|
|     V4L/DVB (9639): Make dib0700 remote control support work with firmware v1.20
Quoted 7 lines

2.6.28.x with DVB drivers from v4l-dvb hg works as expected bu I fail to see which changeset fixed it. If you have an idea I'll test it. Otherwise I'll bisect v4l-dvb hg.

This should be fixed in 2.6.28-stable.

Janne

Hello Janneg,

Thank you for reporting this issue.

We actually rely on the bulk endpoint timing out to query the IR port if there is no keypress. I wonder if they introduced a new kernel warning in 2.6.28.4 when this occurs.

Regarding the other issue, is there any correlation with the errors to plugging/unplugging the devices? Perhaps there is an issue with cancellation of the thread that does the polling when the device is disconnected.

I actually don't have a Nova-T 500. I did all the development on the dib0700 based Pinnacle 801e.

Devin

Signature · 3 lines
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller