Skip to contentSkip to conversation

mpc8641hpcn: Indicate 36-bit addr map in boot messages

PATCH New Becky Bruce 2 participants 2 messages Feb 12, 2009 – Feb 23, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mpc8641hpcn: Indicate 36-bit addr map in boot messages

If 36-bit addressing is enabled, print a message on the console when we boot.

---
 board/freescale/mpc8641hpcn/mpc8641hpcn.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
board/freescale/mpc8641hpcn/mpc8641hpcn.c +3 -0
index 28c1683..bc68ca6 100644
@@ -46,6 +46,9 @@ int checkboard(void)
 		"System Version: 0x%02x, FPGA Version: 0x%02x\n",
 		in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
 		in8(PIXIS_BASE + PIXIS_PVER));
+#ifdef CONFIG_PHYS_64BIT
+	printf ("       36-bit physical address map\n");
+#endif
 	return 0;
 }
 
Signature · 1 line
1.5.6.6
#1 lore raw

PATCH 1/1 mpc8641hpcn: Indicate 36-bit addr map in boot messages

Dear Becky Bruce,

Quoted 7 lines · In message <[email protected]> you…

If 36-bit addressing is enabled, print a message on the console when we boot.

---
 board/freescale/mpc8641hpcn/mpc8641hpcn.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bus error -- please leave by the rear door.