ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option

From: Bartlomiej Zolnierkiewicz <[email protected]>
Subject: [PATCH] ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option

Nowadays it is not worth having a separate config option for Amiga IDE Doubler support so always include it (it still needs to be explicitly enabled by module parameter).

---
 drivers/ide/Kconfig |   23 ++++++++---------------
 drivers/ide/gayle.c |   12 +-----------
 2 files changed, 9 insertions(+), 26 deletions(-)

Index: b/drivers/ide/Kconfig
===================================================================
@@ -765,27 +765,20 @@ config BLK_DEV_GAYLE
 	  This includes on-board IDE interfaces on some Amiga models (A600,
 	  A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
 	  bus (M-Tech E-Matrix 530 expansion card).
-	  Say Y if you have an Amiga with a Gayle IDE interface and want to use
-	  IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
-	  it.
-	  Note that you also have to enable Zorro bus support if you want to
-	  use Gayle IDE interfaces on the Zorro expansion bus.
 
-config BLK_DEV_IDEDOUBLER
-	bool "Amiga IDE Doubler support (EXPERIMENTAL)"
-	depends on BLK_DEV_GAYLE && EXPERIMENTAL
-	---help---
-	  This feature provides support for the so-called `IDE doublers' (made
+	  It also provides support for the so-called `IDE doublers' (made
 	  by various manufacturers, e.g. Eyetech) that can be connected to
 	  the on-board IDE interface of some Amiga models. Using such an IDE
 	  doubler, you can connect up to four instead of two IDE devices to
-	  the Amiga's on-board IDE interface.
+	  the Amiga's on-board IDE interface. The feature is enabled at kernel
+	  runtime using the "gayle.doubler" kernel boot parameter.
 
-	  Note that the normal Amiga Gayle IDE driver may not work correctly
-	  if you have an IDE doubler and don't enable this feature!
+	  Say Y if you have an Amiga with a Gayle IDE interface and want to use
+	  IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
+	  it.
 
-	  Say Y if you have an IDE doubler.  The feature is enabled at kernel
-	  runtime using the "gayle.doubler" kernel boot parameter.
+	  Note that you also have to enable Zorro bus support if you want to
+	  use Gayle IDE interfaces on the Zorro expansion bus.
 
 config BLK_DEV_BUDDHA
 	tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"

Index: b/drivers/ide/gayle.c
===================================================================
@@ -53,11 +53,6 @@
 
 #define GAYLE_NEXT_PORT	0x1000
 
-#ifndef CONFIG_BLK_DEV_IDEDOUBLER
-#define GAYLE_NUM_HWIFS		1
-#define GAYLE_NUM_PROBE_HWIFS	GAYLE_NUM_HWIFS
-#define GAYLE_HAS_CONTROL_REG	1
-#else /* CONFIG_BLK_DEV_IDEDOUBLER */
 #define GAYLE_NUM_HWIFS		2
 #define GAYLE_NUM_PROBE_HWIFS	(ide_doubler ? GAYLE_NUM_HWIFS : \
 					       GAYLE_NUM_HWIFS-1)

@@ -66,8 +61,6 @@
 static int ide_doubler;
 module_param_named(doubler, ide_doubler, bool, 0);
 MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
 
     /*
      *  Check and acknowledge the interrupt status

@@ -151,10 +144,7 @@ static int __init gayle_init(void)
 found:
 	printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
 			 a4000 ? 4000 : 1200,
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
-			 ide_doubler ? ", IDE doubler" :
-#endif
-			 "");
+			 ide_doubler ? ", IDE doubler" : "");
 
 	if (a4000) {
 	    phys_base = GAYLE_BASE_4000;

---------- Forwarded message ----------
From: Bartlomiej Zolnierkiewicz <[email protected]>
Date: Mon, Feb 23, 2009 at 23:50
Subject: [PATCH] ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
To: [email protected]
Cc: [email protected], Geert Uytterhoeven <[email protected]>

From: Bartlomiej Zolnierkiewicz <[email protected]>
Subject: [PATCH] ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option

Nowadays it is not worth having a separate config option for Amiga IDE Doubler support so always include it (it still needs to be explicitly enabled by module parameter).

---
 drivers/ide/Kconfig |   23 ++++++++--------------- drivers/ide/gayle.c |   12 +-----------

 2 files changed, 9 insertions(+), 26 deletions(-)

Index: b/drivers/ide/Kconfig
===================================================================
@@ -765,27 +765,20 @@ config BLK_DEV_GAYLE

         This includes on-board IDE interfaces on some Amiga models (A600, A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion bus (M-Tech E-Matrix 530 expansion card).
-         Say Y if you have an Amiga with a Gayle IDE interface and want to use
-         IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
-         it.
-         Note that you also have to enable Zorro bus support if you want to
-         use Gayle IDE interfaces on the Zorro expansion bus.

-config BLK_DEV_IDEDOUBLER
-       bool "Amiga IDE Doubler support (EXPERIMENTAL)"
-       depends on BLK_DEV_GAYLE && EXPERIMENTAL
-       ---help---
-         This feature provides support for the so-called `IDE doublers' (made
+         It also provides support for the so-called `IDE doublers' (made by various manufacturers, e.g. Eyetech) that can be connected to the on-board IDE interface of some Amiga models. Using such an IDE doubler, you can connect up to four instead of two IDE devices to
-         the Amiga's on-board IDE interface.
+         the Amiga's on-board IDE interface. The feature is enabled at kernel
+         runtime using the "gayle.doubler" kernel boot parameter.

-         Note that the normal Amiga Gayle IDE driver may not work correctly
-         if you have an IDE doubler and don't enable this feature!
+         Say Y if you have an Amiga with a Gayle IDE interface and want to use
+         IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
+         it.

-         Say Y if you have an IDE doubler.  The feature is enabled at kernel
-         runtime using the "gayle.doubler" kernel boot parameter.
+         Note that you also have to enable Zorro bus support if you want to
+         use Gayle IDE interfaces on the Zorro expansion bus.

 config BLK_DEV_BUDDHA
       tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"

Index: b/drivers/ide/gayle.c
===================================================================
@@ -53,11 +53,6 @@
 

 #define GAYLE_NEXT_PORT        0x1000

-#ifndef CONFIG_BLK_DEV_IDEDOUBLER
-#define GAYLE_NUM_HWIFS                1
-#define GAYLE_NUM_PROBE_HWIFS  GAYLE_NUM_HWIFS -#define GAYLE_HAS_CONTROL_REG  1
-#else /* CONFIG_BLK_DEV_IDEDOUBLER */
 #define GAYLE_NUM_HWIFS                2
 #define GAYLE_NUM_PROBE_HWIFS  (ide_doubler ? GAYLE_NUM_HWIFS : \
                                              GAYLE_NUM_HWIFS-1) @@ -66,8 +61,6 @@
 static int ide_doubler;
 module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); -#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-

    /*
     *  Check and acknowledge the interrupt status
@@ -151,10 +144,7 @@ static int __init gayle_init(void) found:
       printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", a4000 ? 4000 : 1200,
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
-                        ide_doubler ? ", IDE doubler" :
-#endif
-                        "");
+                        ide_doubler ? ", IDE doubler" : "");

       if (a4000) {
           phys_base = GAYLE_BASE_4000;

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html