do not pretend to support low voltage operation
PATCH 3/3 do not pretend to support low voltage operation
Eliminate "mmc0: SD card claims to support the incompletely defined 'low voltage range'. This will be ignored." warning. Qemu says the card is a SD card, and SD spec doesn't define low-voltage cards, so do now pretend to be one.
Signed-off-by Riku Voipio <[email protected]>
--- hw/sd.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
hw/sd.c +1 -1
@@ -195,7 +195,7 @@ static uint16_t sd_crc16(void *message, size_t width)static void sd_set_ocr (SDState *sd) {/* All voltages OK, card power-up OK, Standard Capacity SD Memory Card */ - sd->ocr =0x80ffff80 ; + sd->ocr =0x80ffff00 ; }static void sd_set_scr (SDState *sd)
Signature · 5 lines
1.6.1.3 -- "rm -rf" only sounds scary if you don't have backups
Aurelien Jarno
AppliedQuoted 5 lines · Riku Voipio
Eliminate "mmc0: SD card claims to support the incompletely defined 'low voltage range'. This will be ignored." warning. Qemu says the card is a SD card, and SD spec doesn't define low-voltage cards, so do now pretend to be one.
Signed-off-by Riku Voipio <[email protected]>
Thanks, applied.
Signature · 2 lines
Aurelien Jarno GPG: 1024D/F1BCDB73 [email protected] http://www.aurel32.net