mpt fusion broken sometime since 2.6.24
Subsystems (3)
I have some systems with the MPT fusion raid cards in them and SAS drives, they work find on the 2.6.24 'etch and a half' debian kernel, but when I try and install a 2.6.28 kernel there are numerous timeouts during boot and the raid array is not recognised.
I tried a 2.6.27 kernel I have laying around and got the same results with it.
is this a known problem with a work-around? or am I just lucky enough to be the only one hitting this?
David Lang
I got a picture of the failed boot at http://linux.lang.hm/linux/IMG00052.jpg
David Lang
Quoted 19 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Date: Tue, 17 Feb 2009 14:24:27 -0800 (PST)
From: [email protected]
To: linux-kernel <[email protected]>
Cc: [email protected], [email protected]
Subject: mpt fusion broken sometime since 2.6.24I have some systems with the MPT fusion raid cards in them and SAS drives, they work find on the 2.6.24 'etch and a half' debian kernel, but when I try and install a 2.6.28 kernel there are numerous timeouts during boot and the raid array is not recognised.
I tried a 2.6.27 kernel I have laying around and got the same results with it.
is this a known problem with a work-around? or am I just lucky enough to be the only one hitting this?
David Lang
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpg
The PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Quoted 9 lines · Matthew Wilcox
Quoted 2 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do (the drives are SAS)
David Lang
Quoted 4 lines · On Tue, Feb 17, 2009 at 03:07:26PM -0800, [email protected] wrote:
Quoted 1 line
mptbase.mpt_msi_enable_sas=0
is that disabling SAS for this system? if so, that's the wrong thing to do (the drives are SAS)
no, it's disabling msi for sas controllers.
nb, I said this patch (e382968ba618e016ff7922dff9a6140c2f9108c8) was the wrong way to go about getting MSI working.
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Quoted 10 lines · Matthew Wilcox
Quoted 4 lines · On Tue, Feb 17, 2009 at 03:07:26PM -0800, [email protected] wrote:
Quoted 1 line
mptbase.mpt_msi_enable_sas=0
is that disabling SAS for this system? if so, that's the wrong thing to do (the drives are SAS)
no, it's disabling msi for sas controllers.
nb, I said this patch (
e382968ba618e016ff7922dff9a6140c2f9108c8) was the wrong way to go about getting MSI working.
yes. that patch really does disable the mptsas with MSI.
http://lkml.org/lkml/2009/2/6/375
it should get into 2.6.29...
YH
Quoted 10 lines · Matthew Wilcox
Date: Tue, 17 Feb 2009 16:11:01 -0700
From: Matthew Wilcox <[email protected]>
To: [email protected]
Cc: linux-kernel <[email protected]>, [email protected],
[email protected]
Subject: Re: mpt fusion broken sometime since 2.6.24Quoted 2 lines · On Tue, Feb 17, 2009 at 03:07:26PM -0800, [email protected] wrote:
Quoted 1 line
mptbase.mpt_msi_enable_sas=0
Quoted 7 lines
Quoted 2 lines
is that disabling SAS for this system? if so, that's the wrong thing to do (the drives are SAS)
no, it's disabling msi for sas controllers.
nb, I said this patch (
e382968ba618e016ff7922dff9a6140c2f9108c8) was the wrong way to go about getting MSI working.
same boot messages, I'll get the lspci in a few min
David Lang
Quoted 7 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 5 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpg
Quoted 9 lines
Quoted 5 lines
The PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do (the drives are SAS)
it only disable MSI with that mptsas.
and mptsas will use ioapic routing.
can you post whole bootlog?
YH
Quoted 16 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 13 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
Quoted 7 lines
Quoted 3 lines
is that disabling SAS for this system? if so, that's the wrong thing to do (the drives are SAS)
it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are the ones that are not being accessed.
David Lang
Quoted 22 lines · [email protected] wrote:
Quoted 20 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 17 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)
Quoted 7 lines
Quoted 4 lines
it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are the ones that are not being accessed.
i mean with kernel before 2.6.24..
YH
Quoted 26 lines · Yinghai Lu
Quoted 25 lines · [email protected] wrote:
Quoted 23 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 9 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 7 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
Quoted 8 lines
Quoted 3 lines
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)it only disable MSI with that mptsas.
and mptsas will use ioapic routing.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are the ones that are not being accessed.
i mean with kernel before 2.6.24..
Ok, attached.
David Lang
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=1 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: nVidia Corporation Unknown device cb84
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: nVidia Corporation Unknown device cb84
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a400 [size=32]
Region 4: I/O ports at 2300 [size=64]
Region 5: I/O ports at 2340 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Unknown device cb84
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe1fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Unknown device cb84
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe1fdc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation Unknown device cb84 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 0d00 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: nVidia Corporation Unknown device cb84 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at b400 [size=4] Region 2: I/O ports at b000 [size=8] Region 3: I/O ports at ac00 [size=4] Region 4: I/O ports at a800 [size=16] Region 5: Memory at fe1fe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: nVidia Corporation Unknown device cb84 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c800 [size=4] Region 2: I/O ports at c400 [size=8] Region 3: I/O ports at c000 [size=4] Region 4: I/O ports at bc00 [size=16] Region 5: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd800000-fe0fffff
Prefetchable memory behind bridge: fb400000-fd3fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000feeff00c Data: 4149
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s, Port 3
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 8, PowerLimit 25.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fd700000-fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000feeff00c Data: 4151
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 2
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 4, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fd600000-fd6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000feeff00c Data: 4159
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 2, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000feeff00c Data: 4161
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
00:1a.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:1a.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1a.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1a.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
00:1b.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
Revision ID: 1.02
00:1b.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1b.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1b.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
Subsystem: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd6f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: df59a117da2b636c Data: 0309
Capabilities: [d0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <2us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
Subsystem: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fd7f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: f30140001e000ea4 Data: 1b2c
Capabilities: [d0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <2us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
05:06.0 VGA compatible controller: XGI - Xabre Graphics Inc Volari Z7 (prog-if 00 [VGA])
Subsystem: XGI - Xabre Graphics Inc Volari Z7
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- BIST result: 00
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fdc00000 (32-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 9000 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe0ff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fe0f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=3 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping
80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: nVidia Corporation Unknown device cb84
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 1: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
80:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: nVidia Corporation Unknown device cb84
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 47
Region 0: I/O ports at fc00 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f400 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ec00 [size=16]
Region 5: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
80:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=84, subordinate=84, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000feeff00c Data: 4169
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x8
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 2, PowerLimit 25.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=83, subordinate=83, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000feeff00c Data: 4171
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
80:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=80, secondary=82, subordinate=82, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-feafffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [60] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=80:10.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=13 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=16 UnitCnt=2 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 2.00
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 1.0GHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE+ OFE+ EOCFE+ RFE- CRCFE+ SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [f4] HyperTransport: MSI Mapping
80:10.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 11) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at febfe000 (64-bit, non-prefetchable) [size=4K]
80:11.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 11) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=80, secondary=81, subordinate=81, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [60] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=80:11.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=13 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Revision ID: 2.00
Capabilities: [f4] HyperTransport: MSI Mapping
80:11.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 11) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
82:03.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS (rev 02)
Subsystem: LSI Logic / Symbios Logic Unknown device 1000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 75 Region 0: I/O ports at d800 [disabled] [size=256] Region 1: Memory at feafc000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at feae0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at fe400000 [disabled] [size=4M] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [68] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=16 Status: Dev=82:03.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=16 DMCRS=128 RSCEM- 266MHz- 533MHz- Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1 Vector table: BAR=1 offset=00002000 PBA: BAR=1 offset=00003000
Initializing cgroup subsys cpuset
Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.4) ([email protected]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Jul 21 10:36:02 UTC 2008 Command line: auto BOOT_IMAGE=Linux ro root=802
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 0000000000094c00 (reserved)
BIOS-e820: 00000000000eadc0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000820000000 (usable)
Entering add_active_range(0, 0, 147) 0 entries of 3200 used
Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 8519680) 2 entries of 3200 usedend_pfn_map = 8519680
DMI present.
ACPI: RSDP 000F9440, 0014 (r0 ACPIAM)
ACPI: RSDT DFFF0000, 0034 (r1 A M I OEMRSDT 6000714 MSFT 97)
ACPI: FACP DFFF0200, 0084 (r2 A M I OEMFACP 6000714 MSFT 97)
ACPI: DSDT DFFF0440, 5218 (r1 WTF4V WTF4V034 34 INTL 2002026)
ACPI: FACS DFFFE000, 0040
ACPI: APIC DFFF0390, 00B0 (r1 A M I OEMAPIC 6000714 MSFT 97)
ACPI: OEMB DFFFE040, 0063 (r1 A M I AMI_OEM 6000714 MSFT 97)
ACPI: SRAT DFFF5660, 01A0 (r1 AMD HAMMER 1 AMD 1)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 147) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-e0000000
Entering add_active_range(0, 0, 147) 1 entries of 3200 used
Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
SRAT: Node 0 PXM 0 0-220000000
Entering add_active_range(0, 0, 147) 2 entries of 3200 used
Entering add_active_range(0, 256, 917488) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 2228224) 2 entries of 3200 used
SRAT: Node 1 PXM 1 220000000-420000000
Entering add_active_range(1, 2228224, 4325376) 3 entries of 3200 used
SRAT: Node 2 PXM 2 420000000-620000000
Entering add_active_range(2, 4325376, 6422528) 4 entries of 3200 used
SRAT: Node 3 PXM 3 620000000-820000000
Entering add_active_range(3, 6422528, 8519680) 5 entries of 3200 used
NUMA: Allocated memnodemap from 2a000 - 2a0c1
NUMA: Using 29 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000220000000
Bootmem setup node 1 0000000220000000-0000000420000000
Bootmem setup node 2 0000000420000000-0000000620000000
Bootmem setup node 3 0000000620000000-0000000820000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 8519680
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0 -> 147
0: 256 -> 917488
0: 1048576 -> 2228224
1: 2228224 -> 4325376
2: 4325376 -> 6422528
3: 6422528 -> 8519680On node 0 totalpages: 2097027
DMA zone: 56 pages used for memmap
DMA zone: 2460 pages reserved
DMA zone: 1471 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899112 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 1 totalpages: 2097152
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 2 totalpages: 2097152
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 3 totalpages: 2097152
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
Processor #4
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
Processor #5
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfebfc000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xfebfc000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfebfe000] gsi_base[72])
IOAPIC[2]: apic_id 10, address 0xfebfe000, GSI 72-78
ACPI: IOAPIC (id[0x0b] address[0xfebff000] gsi_base[79])
IOAPIC[3]: apic_id 11, address 0xfebff000, GSI 79-85
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 0000000000093000 - 0000000000094000
swsusp: Registered nosave memory region: 0000000000094000 - 00000000000eb000
swsusp: Registered nosave memory region: 00000000000eb000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfffe000
swsusp: Registered nosave memory region: 00000000dfffe000 - 00000000e0000000
swsusp: Registered nosave memory region: 00000000e0000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff700000
swsusp: Registered nosave memory region: 00000000ff700000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 34400 bytes of per cpu data
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8269543 Policy zone: Normal
Kernel command line: auto BOOT_IMAGE=Linux ro root=802
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 2814.427 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
CPU 0: aperture @ f4000000 size 64 MB
CPU 1: aperture @ f4000000 size 64 MB
CPU 2: aperture @ f4000000 size 64 MB
CPU 3: aperture @ f4000000 size 64 MB
Memory: 33077220k/34078720k available (2146k kernel code, 476712k reserved, 1004k data, 316k init) Calibrating delay using timer specific routine.. 5632.28 BogoMIPS (lpj=11264579) Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12564415
Detected 12.564 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5628.88 BogoMIPS (lpj=11257778)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 5628.92 BogoMIPS (lpj=11257846)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257835)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x4
Initializing CPU#4
Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257822)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x5
Initializing CPU#5
Calibrating delay using timer specific routine.. 5628.90 BogoMIPS (lpj=11257816)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x6
Initializing CPU#6
Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257827)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257838)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUsnet_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EE, should be EB [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0f12 PNP0f13 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
system 00:07: ioport range 0x190-0x193 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xffb80000-0xfffffffe could not be reserved
system 00:07: iomem range 0xdfefc000-0xdfefcfff could not be reserved
system 00:07: iomem range 0xdfefd000-0xdfefd3ff could not be reserved
system 00:07: iomem range 0xdfefe000-0xdfefe3ff could not be reserved
system 00:07: iomem range 0xdfeff000-0xdfefffff could not be reserved
system 00:07: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:07: driver attached
system 00:08: ioport range 0xca2-0xca3 has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:08: iomem range 0xfe200000-0xfebfffff could not be reserved
system 00:08: iomem range 0xfd500000-0xfd5fffff has been reserved
system 00:08: driver attached
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: driver attached
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: driver attached
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
system 00:0d: iomem range 0x0-0x0 could not be reserved
system 00:0d: driver attached
PCI: Bridge: 0000:00:09.0
IO window: 9000-9fff
MEM window: fd800000-fe0fffff
PREFETCH window: fb400000-fd3fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: fd700000-fd7fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: fd600000-fd6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:80:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:80:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:80:10.0
IO window: d000-dfff
MEM window: fe200000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:80:11.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:80:0d.0 to 64
PCI: Setting latency timer of device 0000:80:0e.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 7
IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5446k freed
audit: initializing netlink socket (disabled)
audit(1234913487.632:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:80:0d.0
PCI: Found enabled HT MSI Mapping on 0000:80:00.0
PCI: Found disabled HT MSI Mapping on 0000:80:0e.0
PCI: Found enabled HT MSI Mapping on 0000:80:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:80:0d.0 to 64assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0d.0:pcie00]
PCI: Setting latency timer of device 0000:80:0e.0 to 64assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:05: driver attached
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 00:06: driver attached
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:09: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:0a: driver attached
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input1ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64ohci_hcd 0000:00:02.0: OHCI Host Controllerohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe1fc000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
SCSI subsystem initialized
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SAS Host driver 3.04.06
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xa2) at PCI slot 0000:00:06.0
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0x0d00-0x0d07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x0d08-0x0d0f, BIOS settings: hdc:DMA, hdd:DMAProbing IDE interface ide0...
hdb: TSSTcorpCD-ROM TS-L162C, ATAPI CD/DVD-ROM drive
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
tg3.c:v3.86 (November 9, 2007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:d0:68:12:f6:fd
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:d0:68:12:f6:fc
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.1 to 64ehci_hcd 0000:00:02.1: EHCI Host Controllerehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe1fdc00
libata version 3.00 loaded.ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detectedsata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 20sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 20
ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 20
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 22 (level, low) -> IRQ 22sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 22
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 47
ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 47 (level, low) -> IRQ 47sata_nv 0000:80:08.0: Using ADMA mode
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [LNKC] -> <7>PCI: Setting latency timer of device 0000:80:08.0 to 64 GSI 17 (level, low) -> IRQ 17
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 47
ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 47
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fe0ff800-fe0fffff] Max Packet=[2048] IR/IT contexts=[4/8]
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:82:03.0[A] -> GSI 75 (level, low) -> IRQ 75
mptbase: ioc0: Initiating bringup
hdb: ATAPI 24X CD-ROM drive, 96kB Cache
Uniform CD-ROM driver Revision: 3.20
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000000002244e]
ioc0: LSISAS1068 B1: Capabilities={Initiator}
scsi6 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=75
scsi 6:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5 scsi 6:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5 scsi 6:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
Driver 'sd' needs updating - please use bus_type methods
sd 6:1:0:0: [sda] 285155328 512-byte hardware sectors (146000 MB)
sd 6:1:0:0: [sda] Write Protect is off
sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 6:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:1:0:0: [sda] 285155328 512-byte hardware sectors (146000 MB)
sd 6:1:0:0: [sda] Write Protect is off
sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 6:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 6:1:0:0: [sda] Attached SCSI disk
Probing IDE interface ide1...
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: generic_sse
generic_sse: 8660.000 MB/sec
xor: using function: generic_sse (8660.000 MB/sec)async_tx: api initialized (sync-only)
raid6: int64x1 2538 MB/s
raid6: int64x2 3089 MB/s
raid6: int64x4 3283 MB/s
raid6: int64x8 2294 MB/s
raid6: sse2x1 3553 MB/s
raid6: sse2x2 5050 MB/s
raid6: sse2x4 5181 MB/s
raid6: using algorithm sse2x4 (5181 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Attempting manual resume
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
input: Power Button (FF) as /class/input/input2
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2300
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2340
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
input: PC Speaker as /class/input/input4pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button (CM) [PWRB]
Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected] XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Quoted 28 lines · [email protected] wrote:
Quoted 26 lines · Yinghai Lu
Quoted 25 lines · [email protected] wrote:
Quoted 23 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 9 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 7 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
Quoted 8 lines
Quoted 3 lines
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)it only disable MSI with that mptsas.
and mptsas will use ioapic routing.
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are the ones that are not being accessed.
i mean with kernel before 2.6.24..
Ok, attached.
so your lsi 1068 is under 8132... need to double check if that chip really support MSI.
YH
Quoted 34 lines · Yinghai Lu
Quoted 33 lines · [email protected] wrote:
Quoted 31 lines · Yinghai Lu
Quoted 29 lines · [email protected] wrote:
Quoted 16 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 13 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
Quoted 8 lines
Quoted 4 lines
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are the ones that are not being accessed.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
i mean with kernel before 2.6.24..
Ok, attached.
so your lsi 1068 is under 8132... need to double check if that chip really support MSI.
anything I can do in the 2.6.24 kernel? or the 2.8.28.6 kernel?
David Lang
Quoted 39 lines · [email protected] wrote:
Quoted 37 lines · Yinghai Lu
Quoted 36 lines · [email protected] wrote:
Quoted 33 lines · Yinghai Lu
Quoted 22 lines · [email protected] wrote:
Quoted 20 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 17 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)Quoted 8 lines
Quoted 4 lines
it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are
the ones that are not being accessed.i mean with kernel before 2.6.24..
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Ok, attached.
so your lsi 1068 is under 8132... need to double check if that chip really support MSI.
anything I can do in the 2.6.24 kernel? or the 2.8.28.6 kernel?
for 2.6.24, it disable msi by default.
for 2.6.28 please have
mptbase.mpt_msi_enable=0
in your boot command line.
YH
Quoted 46 lines · Yinghai Lu
Quoted 45 lines · [email protected] wrote:
Quoted 42 lines · Yinghai Lu
Quoted 30 lines · [email protected] wrote:
Quoted 28 lines · Yinghai Lu
Quoted 27 lines · [email protected] wrote:
Quoted 24 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 9 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 7 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
Quoted 8 lines
Quoted 3 lines
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
unfortunantly it's booting from CD and the only drives in the system are
the ones that are not being accessed.i mean with kernel before 2.6.24..
Ok, attached.
so your lsi 1068 is under 8132... need to double check if that chip really support MSI.
Quoted 7 lines
Quoted 2 lines
anything I can do in the 2.6.24 kernel? or the 2.8.28.6 kernel?
for 2.6.24, it disable msi by default.
for 2.6.28 please have
mptbase.mpt_msi_enable=0
in your boot command line.
this does let it boot.
David Lang
Quoted 37 lines · [email protected] wrote:
Quoted 35 lines · Yinghai Lu
Quoted 34 lines · [email protected] wrote:
Quoted 32 lines · Yinghai Lu
Quoted 30 lines · [email protected] wrote:
Quoted 16 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 13 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
Quoted 8 lines
Quoted 4 lines
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are
the ones that are not being accessed.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
i mean with kernel before 2.6.24..
Ok, attached.
so your lsi 1068 is under 8132... need to double check if that chip really support MSI.
just check
[ 24.921006] calling mptsas_init+0x0/0x119 @ 1
[ 24.925443] Fusion MPT SAS Host driver 3.04.07
[ 24.929928] mptsas 0000:0c:04.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
[ 24.936888] mptsas 0000:0c:04.0: using 64bit DMA mask
[ 24.941931] mptsas 0000:0c:04.0: using 64bit consistent DMA mask
[ 24.948099] mptbase: ioc0: Initiating bringup
[ 25.660009] ioc0: LSISAS1064 A3: Capabilities={Initiator}
[ 25.665461] alloc irq_desc for 83 on cpu 0 node 0
[ 25.668374] alloc kstat_irqs on cpu 0 node 0
[ 25.674778] mptsas 0000:0c:04.0: irq 83 for MSI/MSI-X
[ 25.679826] mptbase: ioc0: PCI-MSI enabled
[ 46.540010] mptbase: ioc0: Initiating recovery
[ 59.330211] scsi2 : ioc0: LSISAS1064 A3, FwRev=01175a00h, Ports=1, MaxQ=286, IRQ=83
[ 59.357423] scsi 2:0:0:0: Direct-Access SEAGATE ST973401LSUN72G 0556 PQ: 0 ANSI: 3
[ 59.367116] sd 2:0:0:0: [sda] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 59.376061] sd 2:0:0:0: [sda] Write Protect is off
[ 59.380849] sd 2:0:0:0: [sda] Mode Sense: e3 00 10 08
[ 59.387169] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 59.396296] sd 2:0:0:0: [sda] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 59.405237] sd 2:0:0:0: [sda] Write Protect is off
[ 59.410025] sd 2:0:0:0: [sda] Mode Sense: e3 00 10 08
[ 59.416349] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUAthat MSI does work on one system lsi sas...under PCI-X
+-10.0-[0000:0b]--+-01.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
| +-01.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
| +-02.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
| \-02.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
+-10.1 Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC
+-11.0-[0000:0c]--+-01.0 Intel Corporation 82546GB Gigabit Ethernet Controller
| +-01.1 Intel Corporation 82546GB Gigabit Ethernet Controller
| +-02.0 Intel Corporation 82546GB Gigabit Ethernet Controller
| +-02.1 Intel Corporation 82546GB Gigabit Ethernet Controller
| \-04.0 LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS0c:04.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS (rev 02)
Subsystem: LSI Logic / Symbios Logic Device 3060
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 83
Region 0: I/O ports at b800 [disabled] [size=256]
Region 1: Memory at fe57c000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at fe560000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fe200000 [disabled] [size=2M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+
Address: 00000000fee04000 Data: 40aa
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=1024 OST=4
Status: Dev=0c:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=16 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000
Kernel driver in use: mptsas00: 00 10 50 00 56 05 30 02 02 00 00 01 10 48 00 00 10: 01 b8 00 00 04 c0 57 fe 00 00 00 00 04 00 56 fe 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 60 30 30: 00 00 20 fe 50 00 00 00 00 00 00 00 0a 01 40 0a 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 98 02 06 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 07 b0 34 10 20 0c 43 13 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 05 68 81 00 00 40 e0 fe
a0: 00 00 00 00 aa 40 00 00 00 00 00 00 00 00 00 00
b0: 11 00 00 00 01 20 00 00 01 30 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?
or can you check if there is update fw for your LSI card?
[PATCH] mpt: fix enable lsi sas to use msi as default
Impact: fix bug
the third param in module_param(,,) is perm instead of default value. we still need to assign default at first.
--- drivers/message/fusion/mptbase.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/message/fusion/mptbase.c +2 -2
@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);MODULE_PARM_DESC (mpt_msi_enable_fc," Enable MSI Support for FC \ controllers (default=0)" ); -static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +static int mpt_msi_enable_sas =1 ; +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ controllers (default=1)" );
Quoted 38 lines · Yinghai Lu
Quoted 37 lines · [email protected] wrote:
Quoted 35 lines · Yinghai Lu
Quoted 34 lines · [email protected] wrote:
Quoted 32 lines · Yinghai Lu
Quoted 30 lines · [email protected] wrote:
Quoted 16 lines · Yinghai Lu
Subject: Re: mpt fusion broken sometime since 2.6.24
Quoted 13 lines · On Tue, Feb 17, 2009 at 3:07 PM, <[email protected]> wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 3 lines · On Tue, Feb 17, 2009 at 01:44:55PM -0800, [email protected] wrote:
I got a picture of the failed boot at
http://linux.lang.hm/linux/IMG00052.jpgThe PCI-MSI line is probably indicative. Can you try booting with:
mptbase.mpt_msi_enable_sas=0
and also send us an lspci -v so we can update the blacklist?
Quoted 8 lines
Quoted 4 lines
is that disabling SAS for this system? if so, that's the wrong thing to do
(the drives are SAS)it only disable MSI with that mptsas.
and mptsas will use ioapic routing.can you post whole bootlog?
unfortunantly it's booting from CD and the only drives in the system are
the ones that are not being accessed.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
i mean with kernel before 2.6.24..
Ok, attached.
so your lsi 1068 is under 8132... need to double check if that chip really support MSI.
<SNIP>
I don't understand the section I snipped from the message above
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?
I will see about trying this.
Quoted 1 line
or can you check if there is update fw for your LSI card?
this is more work, I'll look into that as well.
David Lang
Quoted 29 lines
[PATCH] mpt: fix enable lsi sas to use msi as default
Impact: fix bug
the third param in
module_param(,,)is perm instead of default value. we still need to assign default at first.Signed-off-by Yinghai Lu <[email protected]>---
drivers/message/fusion/mptbase.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux-2.6/drivers/message/fusion/mptbase.c
===================================================================drivers/message/fusion/mptbase.c +2
-2@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);MODULE_PARM_DESC (mpt_msi_enable_fc," Enable MSI Support for FC \ controllers (default=0)" ); -static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +static int mpt_msi_enable_sas =1 ; +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ controllers (default=1)" );
Quoted 6 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?I will see about trying this.
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
David Lang
Quoted 41 lines
Quoted 1 line
or can you check if there is update fw for your LSI card?
this is more work, I'll look into that as well.
David Lang
Quoted 19 lines
[PATCH] mpt: fix enable lsi sas to use msi as default
Impact: fix bug
the third param in
module_param(,,)is perm instead of default value. we still need to assign default at first.Signed-off-by Yinghai Lu <[email protected]>---
drivers/message/fusion/mptbase.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux-2.6/drivers/message/fusion/mptbase.c
===================================================================drivers/message/fusion/mptbase.c module_param(mpt_msi_enable_fc, int, 0); · line 97
Quoted 10 lines
drivers/message/fusion/mptbase.c +2
-2@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);MODULE_PARM_DESC (mpt_msi_enable_fc," Enable MSI Support for FC \ controllers (default=0)" ); -static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +static int mpt_msi_enable_sas =1 ; +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ controllers (default=1)" );--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · [email protected] wrote:
Quoted 6 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?I will see about trying this.
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
please try this patch too. wonder if your BIOS does enable the HT MSI ...
drivers/pci/quirks.c +3 -0
@@ -1981,6 +1981,9 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE , quirk_msi_ht_cap); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + quirk_msi_ht_cap); +/* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings.
Quoted 8 lines · Yinghai Lu
Quoted 7 lines · [email protected] wrote:
Quoted 5 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
I will see about trying this.
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
please try this patch too. wonder if your BIOS does enable the HT MSI ...
this does solve the problem.
David Lang
Quoted 16 lines
drivers/pci/quirks.c +3
-0@@ -1981,6 +1981,9 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE , quirk_msi_ht_cap); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + quirk_msi_ht_cap); +/* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings.
Quoted 10 lines · [email protected] wrote:
Quoted 8 lines · Yinghai Lu
Quoted 7 lines · [email protected] wrote:
Quoted 5 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
I will see about trying this.
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
please try this patch too. wonder if your BIOS does enable the HT MSI ...
this does solve the problem.
can you send out boot log?
YH
Quoted 22 lines
David Lang
Quoted 19 lines
drivers/pci/quirks.c +3
-0@@ -1981,6 +1981,9 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE ,quirk_msi_ht_cap ); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + quirk_msi_ht_cap); +/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
Quoted 21 lines · Yinghai Lu
Date: Tue, 17 Feb 2009 19:28:59 -0800
From: Yinghai Lu <[email protected]>
To: [email protected]
Cc: Matthew Wilcox <[email protected]>,
linux-kernel <[email protected]>, [email protected], [email protected]
Subject: Re: mpt fusion broken sometime since 2.6.24Quoted 12 lines · [email protected] wrote:
Quoted 10 lines · Yinghai Lu
Quoted 9 lines · [email protected] wrote:
Quoted 6 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?I will see about trying this.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
please try this patch too. wonder if your BIOS does enable the HT MSI ...
this does solve the problem.
can you send out boot log?
attached
DAvid Lang
Quoted 15 lines
YH
Quoted 14 lines
David Lang
Quoted 11 lines
drivers/pci/quirks.c +0
-0@@ -1981,6 +1981,9 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE ,quirk_msi_ht_cap );
Quoted 10 lines
Quoted 8 lines
Quoted 8 lines
drivers/pci/quirks.c +3
-0+DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + quirk_msi_ht_cap); +/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
Linux version 2.6.29-rc5.SMP.K8-64-00122-g5955c7a-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #21 SMP Tue Feb 17 18:41:12 PST 2009 Command line: auto BOOT_IMAGE=test2 ro root=803 console=ttyS1,9600n8 console=tty1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 0000000000094c00 (reserved)
BIOS-e820: 00000000000eadc0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000820000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.last_pfn = 0x820000 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106last_pfn = 0xdfff0 max_arch_pfn = 0x100000000init_memory_mapping: 0000000000000000-00000000dfff0000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfff0000 page 4k
kernel direct mapping tables up to dfff0000 @ 10000-16000last_map_addr: dfff0000 end: dfff0000init_memory_mapping: 0000000100000000-0000000820000000
0100000000 - 0820000000 page 2M
kernel direct mapping tables up to 820000000 @ 14000-36000last_map_addr: 820000000 end: 820000000
ACPI: RSDP 000F9440, 0014 (r0 ACPIAM)
ACPI: RSDT DFFF0000, 0034 (r1 A M I OEMRSDT 6000714 MSFT 97)
ACPI: FACP DFFF0200, 0084 (r2 A M I OEMFACP 6000714 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT DFFF0440, 5218 (r1 WTF4V WTF4V034 34 INTL 2002026)
ACPI: FACS DFFFE000, 0040
ACPI: APIC DFFF0390, 00B0 (r1 A M I OEMAPIC 6000714 MSFT 97)
ACPI: OEMB DFFFE040, 0063 (r1 A M I AMI_OEM 6000714 MSFT 97)
ACPI: SRAT DFFF5660, 01A0 (r1 AMD HAMMER 1 AMD 1)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-e0000000
SRAT: Node 0 PXM 0 100000000-220000000
SRAT: Node 1 PXM 1 220000000-420000000
SRAT: Node 2 PXM 2 420000000-620000000
SRAT: Node 3 PXM 3 620000000-820000000
NUMA: Allocated memnodemap from 31000 - 41440
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [0000000000041440 - 000000000004343f]
bootmap [0000000000044000 - 0000000000087fff] pages 44
(7 early reservations) ==> bootmem [0000000000 - 0220000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000975dc4] TEXT DATA BSS ==> [0000200000 - 0000975dc4]
#3 [0000093c00 - 0000100000] BIOS reserved ==> [0000093c00 - 0000100000]
#4 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#5 [0000014000 - 0000031000] PGTABLE ==> [0000014000 - 0000031000]
#6 [0000031000 - 0000041440] MEMNODEMAP ==> [0000031000 - 0000041440]
Bootmem setup node 1 0000000220000000-0000000420000000
NODE_DATA [0000000220000000 - 0000000220001fff]
bootmap [0000000220002000 - 0000000220041fff] pages 40
(7 early reservations) ==> bootmem [0220000000 - 0420000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
Bootmem setup node 2 0000000420000000-0000000620000000
NODE_DATA [0000000420000000 - 0000000420001fff]
bootmap [0000000420002000 - 0000000420041fff] pages 40
(7 early reservations) ==> bootmem [0420000000 - 0620000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
Bootmem setup node 3 0000000620000000-0000000820000000
NODE_DATA [0000000620000000 - 0000000620001fff]
bootmap [0000000620002000 - 0000000620041fff] pages 40
(7 early reservations) ==> bootmem [0620000000 - 0820000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20007700000-ffffe200077fffff] potential offnode page_structs
[ffffe20000000000-ffffe200077fffff] PMD -> [ffff880028200000-ffff88002f3fffff] on node 0
[ffffe2000e700000-ffffe2000e7fffff] potential offnode page_structs
[ffffe20007800000-ffffe2000e7fffff] PMD -> [ffff880220200000-ffff8802271fffff] on node 1
[ffffe20015700000-ffffe200157fffff] potential offnode page_structs
[ffffe2000e800000-ffffe200157fffff] PMD -> [ffff880420200000-ffff8804271fffff] on node 2
[ffffe20015800000-ffffe2001c7fffff] PMD -> [ffff880620200000-ffff8806271fffff] on node 3
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00820000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x00000093
0: 0x00000100 -> 0x000dfff0
0: 0x00100000 -> 0x00220000
1: 0x00220000 -> 0x00420000
2: 0x00420000 -> 0x00620000
3: 0x00620000 -> 0x00820000On node 0 totalpages: 2097011
DMA zone: 56 pages used for memmap
DMA zone: 2071 pages reserved
DMA zone: 1844 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899112 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
On node 1 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 2 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 3 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfebfc000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 0, address 0xfebfc000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfebfe000] gsi_base[72])
IOAPIC[2]: apic_id 10, version 0, address 0xfebfe000, GSI 72-78
ACPI: IOAPIC (id[0x0b] address[0xfebff000] gsi_base[79])
IOAPIC[3]: apic_id 11, version 0, address 0xfebff000, GSI 79-85
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUsnr_irqs_gsi: 86
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:4
PERCPU: Allocating 40960 bytes of per cpu data
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8269916
Policy zone: Normal
Kernel command line: auto BOOT_IMAGE=test2 ro root=803 console=ttyS1,9600n8 console=tty1 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2814.492 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS1] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ f4000000 size 64 MB
Node 1: aperture @ f4000000 size 64 MB
Node 2: aperture @ f4000000 size 64 MB
Node 3: aperture @ f4000000 size 64 MB
Memory: 33084308k/34078720k available (3910k kernel code, 524852k absent, 469560k reserved, 1814k data, 372k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.98 BogoMIPS (lpj=11257968) Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5629.23 BogoMIPS (lpj=11258478)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5629.24 BogoMIPS (lpj=11258499)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 4 APIC 0x4 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/0x4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5629.26 BogoMIPS (lpj=11258522)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/0x5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 6 APIC 0x6 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258505)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/0x6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5629.24 BogoMIPS (lpj=11258486)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/0x7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUs
Total of 8 processors activated (45033.72 BogoMIPS).net_namespace: 1352 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 8671.000 MB/sec
xor: using function: generic_sse (8671.000 MB/sec)
NET: Registered protocol family 16
node 0 link 2: io port [9000, cfff]
node 1 link 1: io port [d000, ffff]
node 1 link 1: io port [1000, 1fff]
TOM: 00000000e0000000 aka 3584M
node 1 link 1: mmio [fe200000, febfffff]
node 1 link 1: mmio [fd500000, fd5fffff]
node 0 link 2: mmio [fd600000, fd7fffff]
node 0 link 2: mmio [e0000000, e3ffffff]
node 1 link 1: mmio [e8000000, ebffffff]
node 0 link 2: mmio [a0000, bffff]
TOM2: 0000000820000000 aka 33280M
bus: [00,05] on node 0 link 2
bus: 00 index 0 io port: [2000, cfff]
bus: 00 index 1 io port: [0, fff]
bus: 00 index 2 mmio: [fd600000, fe1fffff]
bus: 00 index 3 mmio: [e0000000, e7ffffff]
bus: 00 index 4 mmio: [a0000, bffff]
bus: 00 index 5 mmio: [fec00000, ffffffff]
bus: 00 index 6 mmio: [ec000000, fd4fffff]
bus: 00 index 7 mmio: [820000000, fcffffffff]
bus: [80,84] on node 1 link 1
bus: 80 index 0 io port: [d000, ffff]
bus: 80 index 1 io port: [1000, 1fff]
bus: 80 index 2 mmio: [fe200000, febfffff]
bus: 80 index 3 mmio: [fd500000, fd5fffff]
bus: 80 index 4 mmio: [e8000000, ebffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Denied BIOS AML access to invalid port 0x21+0x1 (PIC0)
ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [IRQM] [20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10 io port: [0xa400-0xa41f]
pci 0000:00:01.1: reg 20 io port: [0x2300-0x233f]
pci 0000:00:01.1: reg 24 io port: [0x2340-0x237f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfe1fc000-0xfe1fcfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfe1fdc00-0xfe1fdcff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xd00-0xd0f]
pci 0000:00:07.0: reg 10 io port: [0xb800-0xb807]
pci 0000:00:07.0: reg 14 io port: [0xb400-0xb403]
pci 0000:00:07.0: reg 18 io port: [0xb000-0xb007]
pci 0000:00:07.0: reg 1c io port: [0xac00-0xac03]
pci 0000:00:07.0: reg 20 io port: [0xa800-0xa80f]
pci 0000:00:07.0: reg 24 32bit mmio: [0xfe1fe000-0xfe1fefff]
pci 0000:00:08.0: reg 10 io port: [0xcc00-0xcc07]
pci 0000:00:08.0: reg 14 io port: [0xc800-0xc803]
pci 0000:00:08.0: reg 18 io port: [0xc400-0xc407]
pci 0000:00:08.0: reg 1c io port: [0xc000-0xc003]
pci 0000:00:08.0: reg 20 io port: [0xbc00-0xbc0f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfe1ff000-0xfe1fffff]
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:05:06.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:05:06.0: reg 14 32bit mmio: [0xfdc00000-0xfdc3ffff]
pci 0000:05:06.0: reg 18 io port: [0x9000-0x907f]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:07.0: reg 10 32bit mmio: [0xfe0ff800-0xfe0fffff]
pci 0000:05:07.0: reg 14 32bit mmio: [0xfe0f8000-0xfe0fbfff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfe0fffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xfb400000-0xfd3fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfd7f0000-0xfd7fffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:0c.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfd6f0000-0xfd6fffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0d.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:80)
pci 0000:80:01.0: reg 14 32bit mmio: [0xfebfc000-0xfebfcfff]
pci 0000:80:08.0: reg 10 io port: [0xfc00-0xfc07]
pci 0000:80:08.0: reg 14 io port: [0xf800-0xf803]
pci 0000:80:08.0: reg 18 io port: [0xf400-0xf407]
pci 0000:80:08.0: reg 1c io port: [0xf000-0xf003]
pci 0000:80:08.0: reg 20 io port: [0xec00-0xec0f]
pci 0000:80:08.0: reg 24 32bit mmio: [0xfebfd000-0xfebfdfff]
pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0d.0: PME# disabled
pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0e.0: PME# disabled
pci 0000:80:10.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff]
pci 0000:80:11.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff]
pci 0000:82:03.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:82:03.0: reg 14 64bit mmio: [0xfeafc000-0xfeafffff]
pci 0000:82:03.0: reg 1c 64bit mmio: [0xfeae0000-0xfeaeffff]
pci 0000:82:03.0: reg 30 32bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:82:03.0: supports D1 D2
pci 0000:80:10.0: bridge io port: [0xd000-0xdfff]
pci 0000:80:10.0: bridge 32bit mmio: [0xfe200000-0xfeafffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - EE, should be EB [20081204] SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KBinit_memory_mapping: 00000000f4000000-00000000f8000000
00f4000000 - 00f8000000 page 2Mlast_map_addr: f8000000 end: f8000000
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x190-0x193 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xffb80000-0xfffffffe has been reserved
system 00:07: iomem range 0xdfefc000-0xdfefcfff could not be reserved
system 00:07: iomem range 0xdfefd000-0xdfefd3ff could not be reserved
system 00:07: iomem range 0xdfefe000-0xdfefe3ff could not be reserved
system 00:07: iomem range 0xdfeff000-0xdfefffff could not be reserved
system 00:07: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:08: ioport range 0xca2-0xca3 has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:08: iomem range 0xfe200000-0xfebfffff could not be reserved
system 00:08: iomem range 0xfd500000-0xfd5fffff has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
Switched to high resolution mode on CPU 0
pci 0000:00:09.0: IO window: 0x9000-0x9fff
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 6
pci 0000:00:09.0: MEM window: 0xfd800000-0xfe0fffff
pci 0000:00:09.0: PREFETCH window: 0x000000fb400000-0x000000fd3fffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xfd700000-0xfd7fffff pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfd600000-0xfd6fffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: disabled pci 0000:00:0e.0: MEM window: disabled pci 0000:00:0e.0: PREFETCH window: disabled
pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:80:0d.0: PCI bridge, secondary bus 0000:84
pci 0000:80:0d.0: IO window: disabled pci 0000:80:0d.0: MEM window: disabled pci 0000:80:0d.0: PREFETCH window: disabled pci 0000:80:0e.0: PCI bridge, secondary bus 0000:83 pci 0000:80:0e.0: IO window: disabled pci 0000:80:0e.0: MEM window: disabled pci 0000:80:0e.0: PREFETCH window: disabled pci 0000:80:10.0: PCI bridge, secondary bus 0000:82 pci 0000:80:10.0: IO window: 0xd000-0xdfff pci 0000:80:10.0: MEM window: 0xfe200000-0xfeafffff pci 0000:80:10.0: PREFETCH window: disabled pci 0000:80:11.0: PCI bridge, secondary bus 0000:81 pci 0000:80:11.0: IO window: disabled pci 0000:80:11.0: MEM window: disabled pci 0000:80:11.0: PREFETCH window: disabled
pci 0000:80:0d.0: setting latency timer to 64
pci 0000:80:0e.0: setting latency timer to 64pci_bus 0000:00: resource 0 io: [0x2000-0xcfff]pci_bus 0000:00: resource 1 io: [0x00-0xfff]pci_bus 0000:00: resource 2 mem: [0xfd600000-0xfe1fffff]pci_bus 0000:00: resource 3 mem: [0xe0000000-0xe7ffffff]pci_bus 0000:00: resource 4 mem: [0x0a0000-0x0bffff]pci_bus 0000:00: resource 5 mem: [0xfec00000-0xffffffff]pci_bus 0000:00: resource 6 mem: [0xec000000-0xfd4fffff]pci_bus 0000:00: resource 7 mem: [0x820000000-0xfcffffffff]pci_bus 0000:05: resource 0 io: [0x9000-0x9fff]pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfe0fffff]pci_bus 0000:05: resource 2 mem: [0xfb400000-0xfd3fffff]pci_bus 0000:05: resource 3 io: [0x2000-0xcfff]pci_bus 0000:05: resource 4 io: [0x00-0xfff]pci_bus 0000:05: resource 5 mem: [0xfd600000-0xfe1fffff]pci_bus 0000:05: resource 6 mem: [0xe0000000-0xe7ffffff]pci_bus 0000:05: resource 7 mem: [0x0a0000-0x0bffff]pci_bus 0000:05: resource 8 mem: [0xfec00000-0xffffffff]pci_bus 0000:05: resource 9 mem: [0xec000000-0xfd4fffff]pci_bus 0000:05: resource 10 mem: [0x820000000-0xfcffffffff]pci_bus 0000:04: resource 0 mem: [0x0-0x0]pci_bus 0000:04: resource 1 mem: [0x0-0x0]pci_bus 0000:04: resource 2 mem: [0x0-0x0]pci_bus 0000:04: resource 3 mem: [0x0-0x0]pci_bus 0000:03: resource 0 mem: [0x0-0x0]pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff]pci_bus 0000:03: resource 2 mem: [0x0-0x0]pci_bus 0000:03: resource 3 mem: [0x0-0x0]pci_bus 0000:02: resource 0 mem: [0x0-0x0]pci_bus 0000:02: resource 1 mem: [0xfd600000-0xfd6fffff]pci_bus 0000:02: resource 2 mem: [0x0-0x0]pci_bus 0000:02: resource 3 mem: [0x0-0x0]pci_bus 0000:01: resource 0 mem: [0x0-0x0]pci_bus 0000:01: resource 1 mem: [0x0-0x0]pci_bus 0000:01: resource 2 mem: [0x0-0x0]pci_bus 0000:01: resource 3 mem: [0x0-0x0]pci_bus 0000:80: resource 0 io: [0xd000-0xffff]pci_bus 0000:80: resource 1 io: [0x1000-0x1fff]pci_bus 0000:80: resource 2 mem: [0xfe200000-0xfebfffff]pci_bus 0000:80: resource 3 mem: [0xfd500000-0xfd5fffff]pci_bus 0000:80: resource 4 mem: [0xe8000000-0xebffffff]pci_bus 0000:84: resource 0 mem: [0x0-0x0]pci_bus 0000:84: resource 1 mem: [0x0-0x0]pci_bus 0000:84: resource 2 mem: [0x0-0x0]pci_bus 0000:84: resource 3 mem: [0x0-0x0]pci_bus 0000:83: resource 0 mem: [0x0-0x0]pci_bus 0000:83: resource 1 mem: [0x0-0x0]pci_bus 0000:83: resource 2 mem: [0x0-0x0]pci_bus 0000:83: resource 3 mem: [0x0-0x0]pci_bus 0000:82: resource 0 io: [0xd000-0xdfff]pci_bus 0000:82: resource 1 mem: [0xfe200000-0xfeafffff]pci_bus 0000:82: resource 2 mem: [0x0-0x0]pci_bus 0000:82: resource 3 mem: [0x0-0x0]pci_bus 0000:81: resource 0 mem: [0x0-0x0]pci_bus 0000:81: resource 1 mem: [0x0-0x0]pci_bus 0000:81: resource 2 mem: [0x0-0x0]pci_bus 0000:81: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NTFS driver 2.1.29 [Flags: R/W].
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 32768
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:80:00.0: Enabling HT MSI Mapping
pci 0000:80:0d.0: Found disabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:0d.0: Enabling HT MSI Mapping
pci 0000:80:0e.0: Found disabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:0e.0: Enabling HT MSI Mapping
pci 0000:80:10.0: Found disabled HT MSI Mapping
pci 0000:80:10.0: MSI quirk detected; subordinate MSI disabled
pci 0000:80:11.0: Found disabled HT MSI Mapping
pci 0000:80:11.0: MSI quirk detected; subordinate MSI disabled
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 86 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 87 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: irq 88 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: irq 89 for MSI/MSI-X
pcieport-driver 0000:80:0d.0: setting latency timer to 64
pcieport-driver 0000:80:0d.0: irq 90 for MSI/MSI-X
pcieport-driver 0000:80:0e.0: setting latency timer to 64
pcieport-driver 0000:80:0e.0: irq 91 for MSI/MSI-X
lp: driver loaded but no devices found
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.97 (December 10, 2008)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
tg3 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fd
eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
tg3 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: PME# disabled
eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fc
eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Adaptec aacraid driver 1.1-5[2456]-ms
QLogic Fibre Channel HBA Driver: 8.03.00-k2
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methodssata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 22
ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 22
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21sata_nv 0000:00:08.0: PCI INT A -> Link[LTIE] -> GSI 21 (level, low) -> IRQ 21sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 21
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 21
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 47sata_nv 0000:80:08.0: PCI INT A -> Link[LT2E] -> GSI 47 (level, low) -> IRQ 47sata_nv 0000:80:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 47
ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 47
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)pata_amd 0000:00:06.0: version 0.3.11pata_amd 0000:00:06.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd00 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd08 irq 15
ata7.01: ATAPI: TSSTcorpCD-ROM TS-L162C, MO00, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:54:0x14)
ata7.01: configured for UDMA/33
scsi 6:0:1:0: CD-ROM TSSTcorp CD-ROM TS-L162C MO00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:1:0: Attached scsi CD-ROM sr0
sr 6:0:1:0: Attached scsi generic sg0 type 5
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
mptsas 0000:82:03.0: PCI INT A -> GSI 75 (level, low) -> IRQ 75
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 B1: Capabilities={Initiator}
scsi8 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=75
scsi 8:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:0:0: Attached scsi generic sg1 type 0
scsi 8:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:1:0: Attached scsi generic sg2 type 0
scsi 8:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 8:1:0:0: [sda] Attached SCSI disk
sd 8:1:0:0: Attached scsi generic sg3 type 0
Fusion MPT misc device (ioctl) driver 3.04.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: I/O resource nForce2_smbus [0x2300-0x233f] conflicts with ACPI region SMRG [0x2300-0x2304]
ACPI: Device needs an ACPI driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2300
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2340
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
md: raid1 personality registered for level 1
raid6: int64x1 2540 MB/s
raid6: int64x2 3386 MB/s
raid6: int64x4 3191 MB/s
raid6: int64x8 2263 MB/s
raid6: sse2x1 3888 MB/s
raid6: sse2x2 5188 MB/s
raid6: sse2x4 5257 MB/s
raid6: using algorithm sse2x4 (5257 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (16384 buckets, 65536 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.NF_TPROXY: Transparent proxy support initialized, version 4.1.0NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
UDF-fs: No VRS found
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 372k freed
Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
tg3 0000:03:00.0: PME# disabled
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
Quoted 27 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 25 lines · Yinghai Lu
Date: Tue, 17 Feb 2009 19:28:59 -0800
From: Yinghai Lu <[email protected]>
To: [email protected]
Cc: Matthew Wilcox <[email protected]>,
linux-kernel <[email protected]>,
[email protected],
[email protected]
Subject: Re: mpt fusion broken sometime since 2.6.24Quoted 15 lines · [email protected] wrote:
Quoted 13 lines · Yinghai Lu
Quoted 11 lines · [email protected] wrote:
Quoted 6 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?I will see about trying this.
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
please try this patch too. wonder if your BIOS does enable the HT MSI ...
this does solve the problem.
can you send out boot log?
attached
firmware on the card is showing 6.12.0
what is the harm on other systems if I put the mptbase.mpt_msi_enable=0 into my base config image?
David Lang
Linux version 2.6.29-rc5.SMP.K8-64-00122-g5955c7a-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #21 SMP Tue Feb 17 18:41:12 PST 2009 Command line: auto BOOT_IMAGE=test2 ro root=803 console=ttyS1,9600n8 console=tty1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 0000000000094c00 (reserved)
BIOS-e820: 00000000000eadc0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000820000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.last_pfn = 0x820000 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106last_pfn = 0xdfff0 max_arch_pfn = 0x100000000init_memory_mapping: 0000000000000000-00000000dfff0000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfff0000 page 4k
kernel direct mapping tables up to dfff0000 @ 10000-16000last_map_addr: dfff0000 end: dfff0000init_memory_mapping: 0000000100000000-0000000820000000
0100000000 - 0820000000 page 2M
kernel direct mapping tables up to 820000000 @ 14000-36000last_map_addr: 820000000 end: 820000000
ACPI: RSDP 000F9440, 0014 (r0 ACPIAM)
ACPI: RSDT DFFF0000, 0034 (r1 A M I OEMRSDT 6000714 MSFT 97)
ACPI: FACP DFFF0200, 0084 (r2 A M I OEMFACP 6000714 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT DFFF0440, 5218 (r1 WTF4V WTF4V034 34 INTL 2002026)
ACPI: FACS DFFFE000, 0040
ACPI: APIC DFFF0390, 00B0 (r1 A M I OEMAPIC 6000714 MSFT 97)
ACPI: OEMB DFFFE040, 0063 (r1 A M I AMI_OEM 6000714 MSFT 97)
ACPI: SRAT DFFF5660, 01A0 (r1 AMD HAMMER 1 AMD 1)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-e0000000
SRAT: Node 0 PXM 0 100000000-220000000
SRAT: Node 1 PXM 1 220000000-420000000
SRAT: Node 2 PXM 2 420000000-620000000
SRAT: Node 3 PXM 3 620000000-820000000
NUMA: Allocated memnodemap from 31000 - 41440
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [0000000000041440 - 000000000004343f]
bootmap [0000000000044000 - 0000000000087fff] pages 44
(7 early reservations) ==> bootmem [0000000000 - 0220000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000975dc4] TEXT DATA BSS ==> [0000200000 - 0000975dc4]
#3 [0000093c00 - 0000100000] BIOS reserved ==> [0000093c00 - 0000100000]
#4 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#5 [0000014000 - 0000031000] PGTABLE ==> [0000014000 - 0000031000]
#6 [0000031000 - 0000041440] MEMNODEMAP ==> [0000031000 - 0000041440]
Bootmem setup node 1 0000000220000000-0000000420000000
NODE_DATA [0000000220000000 - 0000000220001fff]
bootmap [0000000220002000 - 0000000220041fff] pages 40
(7 early reservations) ==> bootmem [0220000000 - 0420000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
Bootmem setup node 2 0000000420000000-0000000620000000
NODE_DATA [0000000420000000 - 0000000420001fff]
bootmap [0000000420002000 - 0000000420041fff] pages 40
(7 early reservations) ==> bootmem [0420000000 - 0620000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
Bootmem setup node 3 0000000620000000-0000000820000000
NODE_DATA [0000000620000000 - 0000000620001fff]
bootmap [0000000620002000 - 0000000620041fff] pages 40
(7 early reservations) ==> bootmem [0620000000 - 0820000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20007700000-ffffe200077fffff] potential offnode page_structs
[ffffe20000000000-ffffe200077fffff] PMD -> [ffff880028200000-ffff88002f3fffff] on node 0
[ffffe2000e700000-ffffe2000e7fffff] potential offnode page_structs
[ffffe20007800000-ffffe2000e7fffff] PMD -> [ffff880220200000-ffff8802271fffff] on node 1
[ffffe20015700000-ffffe200157fffff] potential offnode page_structs
[ffffe2000e800000-ffffe200157fffff] PMD -> [ffff880420200000-ffff8804271fffff] on node 2
[ffffe20015800000-ffffe2001c7fffff] PMD -> [ffff880620200000-ffff8806271fffff] on node 3
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00820000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x00000093
0: 0x00000100 -> 0x000dfff0
0: 0x00100000 -> 0x00220000
1: 0x00220000 -> 0x00420000
2: 0x00420000 -> 0x00620000
3: 0x00620000 -> 0x00820000On node 0 totalpages: 2097011
DMA zone: 56 pages used for memmap
DMA zone: 2071 pages reserved
DMA zone: 1844 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899112 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
On node 1 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 2 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 3 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfebfc000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 0, address 0xfebfc000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfebfe000] gsi_base[72])
IOAPIC[2]: apic_id 10, version 0, address 0xfebfe000, GSI 72-78
ACPI: IOAPIC (id[0x0b] address[0xfebff000] gsi_base[79])
IOAPIC[3]: apic_id 11, version 0, address 0xfebff000, GSI 79-85
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUsnr_irqs_gsi: 86
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:4
PERCPU: Allocating 40960 bytes of per cpu data
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8269916
Policy zone: Normal
Kernel command line: auto BOOT_IMAGE=test2 ro root=803 console=ttyS1,9600n8 console=tty1 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2814.492 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS1] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ f4000000 size 64 MB
Node 1: aperture @ f4000000 size 64 MB
Node 2: aperture @ f4000000 size 64 MB
Node 3: aperture @ f4000000 size 64 MB
Memory: 33084308k/34078720k available (3910k kernel code, 524852k absent, 469560k reserved, 1814k data, 372k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.98 BogoMIPS (lpj=11257968) Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5629.23 BogoMIPS (lpj=11258478)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5629.24 BogoMIPS (lpj=11258499)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 4 APIC 0x4 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/0x4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5629.26 BogoMIPS (lpj=11258522)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/0x5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 6 APIC 0x6 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258505)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/0x6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5629.24 BogoMIPS (lpj=11258486)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/0x7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUs
Total of 8 processors activated (45033.72 BogoMIPS).net_namespace: 1352 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 8671.000 MB/sec
xor: using function: generic_sse (8671.000 MB/sec)
NET: Registered protocol family 16
node 0 link 2: io port [9000, cfff]
node 1 link 1: io port [d000, ffff]
node 1 link 1: io port [1000, 1fff]
TOM: 00000000e0000000 aka 3584M
node 1 link 1: mmio [fe200000, febfffff]
node 1 link 1: mmio [fd500000, fd5fffff]
node 0 link 2: mmio [fd600000, fd7fffff]
node 0 link 2: mmio [e0000000, e3ffffff]
node 1 link 1: mmio [e8000000, ebffffff]
node 0 link 2: mmio [a0000, bffff]
TOM2: 0000000820000000 aka 33280M
bus: [00,05] on node 0 link 2
bus: 00 index 0 io port: [2000, cfff]
bus: 00 index 1 io port: [0, fff]
bus: 00 index 2 mmio: [fd600000, fe1fffff]
bus: 00 index 3 mmio: [e0000000, e7ffffff]
bus: 00 index 4 mmio: [a0000, bffff]
bus: 00 index 5 mmio: [fec00000, ffffffff]
bus: 00 index 6 mmio: [ec000000, fd4fffff]
bus: 00 index 7 mmio: [820000000, fcffffffff]
bus: [80,84] on node 1 link 1
bus: 80 index 0 io port: [d000, ffff]
bus: 80 index 1 io port: [1000, 1fff]
bus: 80 index 2 mmio: [fe200000, febfffff]
bus: 80 index 3 mmio: [fd500000, fd5fffff]
bus: 80 index 4 mmio: [e8000000, ebffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Denied BIOS AML access to invalid port 0x21+0x1 (PIC0)
ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [IRQM] [20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10 io port: [0xa400-0xa41f]
pci 0000:00:01.1: reg 20 io port: [0x2300-0x233f]
pci 0000:00:01.1: reg 24 io port: [0x2340-0x237f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfe1fc000-0xfe1fcfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfe1fdc00-0xfe1fdcff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xd00-0xd0f]
pci 0000:00:07.0: reg 10 io port: [0xb800-0xb807]
pci 0000:00:07.0: reg 14 io port: [0xb400-0xb403]
pci 0000:00:07.0: reg 18 io port: [0xb000-0xb007]
pci 0000:00:07.0: reg 1c io port: [0xac00-0xac03]
pci 0000:00:07.0: reg 20 io port: [0xa800-0xa80f]
pci 0000:00:07.0: reg 24 32bit mmio: [0xfe1fe000-0xfe1fefff]
pci 0000:00:08.0: reg 10 io port: [0xcc00-0xcc07]
pci 0000:00:08.0: reg 14 io port: [0xc800-0xc803]
pci 0000:00:08.0: reg 18 io port: [0xc400-0xc407]
pci 0000:00:08.0: reg 1c io port: [0xc000-0xc003]
pci 0000:00:08.0: reg 20 io port: [0xbc00-0xbc0f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfe1ff000-0xfe1fffff]
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:05:06.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:05:06.0: reg 14 32bit mmio: [0xfdc00000-0xfdc3ffff]
pci 0000:05:06.0: reg 18 io port: [0x9000-0x907f]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:07.0: reg 10 32bit mmio: [0xfe0ff800-0xfe0fffff]
pci 0000:05:07.0: reg 14 32bit mmio: [0xfe0f8000-0xfe0fbfff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfe0fffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xfb400000-0xfd3fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfd7f0000-0xfd7fffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:0c.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfd6f0000-0xfd6fffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0d.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:80)
pci 0000:80:01.0: reg 14 32bit mmio: [0xfebfc000-0xfebfcfff]
pci 0000:80:08.0: reg 10 io port: [0xfc00-0xfc07]
pci 0000:80:08.0: reg 14 io port: [0xf800-0xf803]
pci 0000:80:08.0: reg 18 io port: [0xf400-0xf407]
pci 0000:80:08.0: reg 1c io port: [0xf000-0xf003]
pci 0000:80:08.0: reg 20 io port: [0xec00-0xec0f]
pci 0000:80:08.0: reg 24 32bit mmio: [0xfebfd000-0xfebfdfff]
pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0d.0: PME# disabled
pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0e.0: PME# disabled
pci 0000:80:10.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff]
pci 0000:80:11.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff]
pci 0000:82:03.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:82:03.0: reg 14 64bit mmio: [0xfeafc000-0xfeafffff]
pci 0000:82:03.0: reg 1c 64bit mmio: [0xfeae0000-0xfeaeffff]
pci 0000:82:03.0: reg 30 32bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:82:03.0: supports D1 D2
pci 0000:80:10.0: bridge io port: [0xd000-0xdfff]
pci 0000:80:10.0: bridge 32bit mmio: [0xfe200000-0xfeafffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - EE, should be EB [20081204] SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KBinit_memory_mapping: 00000000f4000000-00000000f8000000
00f4000000 - 00f8000000 page 2Mlast_map_addr: f8000000 end: f8000000
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x190-0x193 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xffb80000-0xfffffffe has been reserved
system 00:07: iomem range 0xdfefc000-0xdfefcfff could not be reserved
system 00:07: iomem range 0xdfefd000-0xdfefd3ff could not be reserved
system 00:07: iomem range 0xdfefe000-0xdfefe3ff could not be reserved
system 00:07: iomem range 0xdfeff000-0xdfefffff could not be reserved
system 00:07: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:08: ioport range 0xca2-0xca3 has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:08: iomem range 0xfe200000-0xfebfffff could not be reserved
system 00:08: iomem range 0xfd500000-0xfd5fffff has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
Switched to high resolution mode on CPU 0
pci 0000:00:09.0: IO window: 0x9000-0x9fff
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 6
pci 0000:00:09.0: MEM window: 0xfd800000-0xfe0fffff
pci 0000:00:09.0: PREFETCH window: 0x000000fb400000-0x000000fd3fffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xfd700000-0xfd7fffff pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfd600000-0xfd6fffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: disabled pci 0000:00:0e.0: MEM window: disabled pci 0000:00:0e.0: PREFETCH window: disabled
pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:80:0d.0: PCI bridge, secondary bus 0000:84
pci 0000:80:0d.0: IO window: disabled pci 0000:80:0d.0: MEM window: disabled pci 0000:80:0d.0: PREFETCH window: disabled pci 0000:80:0e.0: PCI bridge, secondary bus 0000:83 pci 0000:80:0e.0: IO window: disabled pci 0000:80:0e.0: MEM window: disabled pci 0000:80:0e.0: PREFETCH window: disabled pci 0000:80:10.0: PCI bridge, secondary bus 0000:82 pci 0000:80:10.0: IO window: 0xd000-0xdfff pci 0000:80:10.0: MEM window: 0xfe200000-0xfeafffff pci 0000:80:10.0: PREFETCH window: disabled pci 0000:80:11.0: PCI bridge, secondary bus 0000:81 pci 0000:80:11.0: IO window: disabled pci 0000:80:11.0: MEM window: disabled pci 0000:80:11.0: PREFETCH window: disabled
pci 0000:80:0d.0: setting latency timer to 64
pci 0000:80:0e.0: setting latency timer to 64pci_bus 0000:00: resource 0 io: [0x2000-0xcfff]pci_bus 0000:00: resource 1 io: [0x00-0xfff]pci_bus 0000:00: resource 2 mem: [0xfd600000-0xfe1fffff]pci_bus 0000:00: resource 3 mem: [0xe0000000-0xe7ffffff]pci_bus 0000:00: resource 4 mem: [0x0a0000-0x0bffff]pci_bus 0000:00: resource 5 mem: [0xfec00000-0xffffffff]pci_bus 0000:00: resource 6 mem: [0xec000000-0xfd4fffff]pci_bus 0000:00: resource 7 mem: [0x820000000-0xfcffffffff]pci_bus 0000:05: resource 0 io: [0x9000-0x9fff]pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfe0fffff]pci_bus 0000:05: resource 2 mem: [0xfb400000-0xfd3fffff]pci_bus 0000:05: resource 3 io: [0x2000-0xcfff]pci_bus 0000:05: resource 4 io: [0x00-0xfff]pci_bus 0000:05: resource 5 mem: [0xfd600000-0xfe1fffff]pci_bus 0000:05: resource 6 mem: [0xe0000000-0xe7ffffff]pci_bus 0000:05: resource 7 mem: [0x0a0000-0x0bffff]pci_bus 0000:05: resource 8 mem: [0xfec00000-0xffffffff]pci_bus 0000:05: resource 9 mem: [0xec000000-0xfd4fffff]pci_bus 0000:05: resource 10 mem: [0x820000000-0xfcffffffff]pci_bus 0000:04: resource 0 mem: [0x0-0x0]pci_bus 0000:04: resource 1 mem: [0x0-0x0]pci_bus 0000:04: resource 2 mem: [0x0-0x0]pci_bus 0000:04: resource 3 mem: [0x0-0x0]pci_bus 0000:03: resource 0 mem: [0x0-0x0]pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff]pci_bus 0000:03: resource 2 mem: [0x0-0x0]pci_bus 0000:03: resource 3 mem: [0x0-0x0]pci_bus 0000:02: resource 0 mem: [0x0-0x0]pci_bus 0000:02: resource 1 mem: [0xfd600000-0xfd6fffff]pci_bus 0000:02: resource 2 mem: [0x0-0x0]pci_bus 0000:02: resource 3 mem: [0x0-0x0]pci_bus 0000:01: resource 0 mem: [0x0-0x0]pci_bus 0000:01: resource 1 mem: [0x0-0x0]pci_bus 0000:01: resource 2 mem: [0x0-0x0]pci_bus 0000:01: resource 3 mem: [0x0-0x0]pci_bus 0000:80: resource 0 io: [0xd000-0xffff]pci_bus 0000:80: resource 1 io: [0x1000-0x1fff]pci_bus 0000:80: resource 2 mem: [0xfe200000-0xfebfffff]pci_bus 0000:80: resource 3 mem: [0xfd500000-0xfd5fffff]pci_bus 0000:80: resource 4 mem: [0xe8000000-0xebffffff]pci_bus 0000:84: resource 0 mem: [0x0-0x0]pci_bus 0000:84: resource 1 mem: [0x0-0x0]pci_bus 0000:84: resource 2 mem: [0x0-0x0]pci_bus 0000:84: resource 3 mem: [0x0-0x0]pci_bus 0000:83: resource 0 mem: [0x0-0x0]pci_bus 0000:83: resource 1 mem: [0x0-0x0]pci_bus 0000:83: resource 2 mem: [0x0-0x0]pci_bus 0000:83: resource 3 mem: [0x0-0x0]pci_bus 0000:82: resource 0 io: [0xd000-0xdfff]pci_bus 0000:82: resource 1 mem: [0xfe200000-0xfeafffff]pci_bus 0000:82: resource 2 mem: [0x0-0x0]pci_bus 0000:82: resource 3 mem: [0x0-0x0]pci_bus 0000:81: resource 0 mem: [0x0-0x0]pci_bus 0000:81: resource 1 mem: [0x0-0x0]pci_bus 0000:81: resource 2 mem: [0x0-0x0]pci_bus 0000:81: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NTFS driver 2.1.29 [Flags: R/W].
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 32768
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:80:00.0: Enabling HT MSI Mapping
pci 0000:80:0d.0: Found disabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:0d.0: Enabling HT MSI Mapping
pci 0000:80:0e.0: Found disabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:0e.0: Enabling HT MSI Mapping
pci 0000:80:10.0: Found disabled HT MSI Mapping
pci 0000:80:10.0: MSI quirk detected; subordinate MSI disabled
pci 0000:80:11.0: Found disabled HT MSI Mapping
pci 0000:80:11.0: MSI quirk detected; subordinate MSI disabled
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 86 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 87 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: irq 88 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: irq 89 for MSI/MSI-X
pcieport-driver 0000:80:0d.0: setting latency timer to 64
pcieport-driver 0000:80:0d.0: irq 90 for MSI/MSI-X
pcieport-driver 0000:80:0e.0: setting latency timer to 64
pcieport-driver 0000:80:0e.0: irq 91 for MSI/MSI-X
lp: driver loaded but no devices found
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.97 (December 10, 2008)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
tg3 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fd
eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
tg3 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: PME# disabled
eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fc
eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Adaptec aacraid driver 1.1-5[2456]-ms
QLogic Fibre Channel HBA Driver: 8.03.00-k2
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methodssata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 22
ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 22
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21sata_nv 0000:00:08.0: PCI INT A -> Link[LTIE] -> GSI 21 (level, low) -> IRQ 21sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 21
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 21
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 47sata_nv 0000:80:08.0: PCI INT A -> Link[LT2E] -> GSI 47 (level, low) -> IRQ 47sata_nv 0000:80:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 47
ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 47
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)pata_amd 0000:00:06.0: version 0.3.11pata_amd 0000:00:06.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd00 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd08 irq 15
ata7.01: ATAPI: TSSTcorpCD-ROM TS-L162C, MO00, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:54:0x14)
ata7.01: configured for UDMA/33
scsi 6:0:1:0: CD-ROM TSSTcorp CD-ROM TS-L162C MO00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:1:0: Attached scsi CD-ROM sr0
sr 6:0:1:0: Attached scsi generic sg0 type 5
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
mptsas 0000:82:03.0: PCI INT A -> GSI 75 (level, low) -> IRQ 75
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 B1: Capabilities={Initiator}
scsi8 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=75
scsi 8:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:0:0: Attached scsi generic sg1 type 0
scsi 8:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:1:0: Attached scsi generic sg2 type 0
scsi 8:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 8:1:0:0: [sda] Attached SCSI disk
sd 8:1:0:0: Attached scsi generic sg3 type 0
Fusion MPT misc device (ioctl) driver 3.04.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: I/O resource nForce2_smbus [0x2300-0x233f] conflicts with ACPI region SMRG [0x2300-0x2304]
ACPI: Device needs an ACPI driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2300
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2340
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
md: raid1 personality registered for level 1
raid6: int64x1 2540 MB/s
raid6: int64x2 3386 MB/s
raid6: int64x4 3191 MB/s
raid6: int64x8 2263 MB/s
raid6: sse2x1 3888 MB/s
raid6: sse2x2 5188 MB/s
raid6: sse2x4 5257 MB/s
raid6: using algorithm sse2x4 (5257 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (16384 buckets, 65536 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.NF_TPROXY: Transparent proxy support initialized, version 4.1.0NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
UDF-fs: No VRS found
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 372k freed
Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
tg3 0000:03:00.0: PME# disabled
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
please try two patches at the same time on 2.6.29-rc5. don't apply other patch.
YH
[PATCH] pci: enable MSI on 8132
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable it
--- drivers/pci/quirks.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/quirks.c +3 -1
@@ -1981,7 +1981,6 @@ static void __devinit quirk_msi_ht_cap(sDECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE , quirk_msi_ht_cap); -/* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */
@@ -2032,6 +2031,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SPCI_DEVICE_ID_SERVERWORKS_HT1000_PXB , ht_enable_msi_mapping); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device.
[PATCH] mpt: fix enable lsi sas to use msi as default
Impact: fix bug
the third param in module_param(,,) is perm instead of default value. we still need to assign default at first.
--- drivers/message/fusion/mptbase.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/message/fusion/mptbase.c +2 -2
@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);MODULE_PARM_DESC (mpt_msi_enable_fc," Enable MSI Support for FC \ controllers (default=0)" ); -static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +static int mpt_msi_enable_sas =1 ; +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ controllers (default=1)" );
Quoted 2 lines · Yinghai Lu
please try two patches at the same time on 2.6.29-rc5. don't apply other patch.
I did a git checkout -f HEAD then applied these two patches and the result works.
David Lang
Linux version 2.6.29-rc5.SMP.K8-64-test3-00122-g5955c7a-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #23 SMP Tue Feb 17 19:30:23 PST 2009 Command line: auto BOOT_IMAGE=test3 ro root=803 console=ttyS1,9600n8 console=tty1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 0000000000094c00 (reserved)
BIOS-e820: 00000000000eadc0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000820000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.last_pfn = 0x820000 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106last_pfn = 0xdfff0 max_arch_pfn = 0x100000000init_memory_mapping: 0000000000000000-00000000dfff0000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfff0000 page 4k
kernel direct mapping tables up to dfff0000 @ 10000-16000last_map_addr: dfff0000 end: dfff0000init_memory_mapping: 0000000100000000-0000000820000000
0100000000 - 0820000000 page 2M
kernel direct mapping tables up to 820000000 @ 14000-36000last_map_addr: 820000000 end: 820000000
ACPI: RSDP 000F9440, 0014 (r0 ACPIAM)
ACPI: RSDT DFFF0000, 0034 (r1 A M I OEMRSDT 6000714 MSFT 97)
ACPI: FACP DFFF0200, 0084 (r2 A M I OEMFACP 6000714 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT DFFF0440, 5218 (r1 WTF4V WTF4V034 34 INTL 2002026)
ACPI: FACS DFFFE000, 0040
ACPI: APIC DFFF0390, 00B0 (r1 A M I OEMAPIC 6000714 MSFT 97)
ACPI: OEMB DFFFE040, 0063 (r1 A M I AMI_OEM 6000714 MSFT 97)
ACPI: SRAT DFFF5660, 01A0 (r1 AMD HAMMER 1 AMD 1)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-e0000000
SRAT: Node 0 PXM 0 100000000-220000000
SRAT: Node 1 PXM 1 220000000-420000000
SRAT: Node 2 PXM 2 420000000-620000000
SRAT: Node 3 PXM 3 620000000-820000000
NUMA: Allocated memnodemap from 31000 - 41440
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [0000000000041440 - 000000000004343f]
bootmap [0000000000044000 - 0000000000087fff] pages 44
(7 early reservations) ==> bootmem [0000000000 - 0220000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000975dc4] TEXT DATA BSS ==> [0000200000 - 0000975dc4]
#3 [0000093c00 - 0000100000] BIOS reserved ==> [0000093c00 - 0000100000]
#4 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#5 [0000014000 - 0000031000] PGTABLE ==> [0000014000 - 0000031000]
#6 [0000031000 - 0000041440] MEMNODEMAP ==> [0000031000 - 0000041440]
Bootmem setup node 1 0000000220000000-0000000420000000
NODE_DATA [0000000220000000 - 0000000220001fff]
bootmap [0000000220002000 - 0000000220041fff] pages 40
(7 early reservations) ==> bootmem [0220000000 - 0420000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
Bootmem setup node 2 0000000420000000-0000000620000000
NODE_DATA [0000000420000000 - 0000000420001fff]
bootmap [0000000420002000 - 0000000420041fff] pages 40
(7 early reservations) ==> bootmem [0420000000 - 0620000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
Bootmem setup node 3 0000000620000000-0000000820000000
NODE_DATA [0000000620000000 - 0000000620001fff]
bootmap [0000000620002000 - 0000000620041fff] pages 40
(7 early reservations) ==> bootmem [0620000000 - 0820000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0000200000 - 0000975dc4] TEXT DATA BSS
#3 [0000093c00 - 0000100000] BIOS reserved
#4 [0000010000 - 0000014000] PGTABLE
#5 [0000014000 - 0000031000] PGTABLE
#6 [0000031000 - 0000041440] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20007700000-ffffe200077fffff] potential offnode page_structs
[ffffe20000000000-ffffe200077fffff] PMD -> [ffff880028200000-ffff88002f3fffff] on node 0
[ffffe2000e700000-ffffe2000e7fffff] potential offnode page_structs
[ffffe20007800000-ffffe2000e7fffff] PMD -> [ffff880220200000-ffff8802271fffff] on node 1
[ffffe20015700000-ffffe200157fffff] potential offnode page_structs
[ffffe2000e800000-ffffe200157fffff] PMD -> [ffff880420200000-ffff8804271fffff] on node 2
[ffffe20015800000-ffffe2001c7fffff] PMD -> [ffff880620200000-ffff8806271fffff] on node 3
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00820000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x00000093
0: 0x00000100 -> 0x000dfff0
0: 0x00100000 -> 0x00220000
1: 0x00220000 -> 0x00420000
2: 0x00420000 -> 0x00620000
3: 0x00620000 -> 0x00820000On node 0 totalpages: 2097011
DMA zone: 56 pages used for memmap
DMA zone: 2071 pages reserved
DMA zone: 1844 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899112 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
On node 1 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 2 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 3 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfebfc000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 0, address 0xfebfc000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfebfe000] gsi_base[72])
IOAPIC[2]: apic_id 10, version 0, address 0xfebfe000, GSI 72-78
ACPI: IOAPIC (id[0x0b] address[0xfebff000] gsi_base[79])
IOAPIC[3]: apic_id 11, version 0, address 0xfebff000, GSI 79-85
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUsnr_irqs_gsi: 86
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:4
PERCPU: Allocating 40960 bytes of per cpu data
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8269916
Policy zone: Normal
Kernel command line: auto BOOT_IMAGE=test3 ro root=803 console=ttyS1,9600n8 console=tty1 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2814.193 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS1] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ f4000000 size 64 MB
Node 1: aperture @ f4000000 size 64 MB
Node 2: aperture @ f4000000 size 64 MB
Node 3: aperture @ f4000000 size 64 MB
Memory: 33084308k/34078720k available (3910k kernel code, 524852k absent, 469560k reserved, 1814k data, 372k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.38 BogoMIPS (lpj=11256772) Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258509)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258501)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 4 APIC 0x4 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258515)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/0x4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258500)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/0x5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 6 APIC 0x6 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5629.26 BogoMIPS (lpj=11258520)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/0x6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5629.25 BogoMIPS (lpj=11258515)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/0x7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUs
Total of 8 processors activated (45033.16 BogoMIPS).net_namespace: 1352 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 8671.000 MB/sec
xor: using function: generic_sse (8671.000 MB/sec)
NET: Registered protocol family 16
node 0 link 2: io port [9000, cfff]
node 1 link 1: io port [d000, ffff]
node 1 link 1: io port [1000, 1fff]
TOM: 00000000e0000000 aka 3584M
node 1 link 1: mmio [fe200000, febfffff]
node 1 link 1: mmio [fd500000, fd5fffff]
node 0 link 2: mmio [fd600000, fd7fffff]
node 0 link 2: mmio [e0000000, e3ffffff]
node 1 link 1: mmio [e8000000, ebffffff]
node 0 link 2: mmio [a0000, bffff]
TOM2: 0000000820000000 aka 33280M
bus: [00,05] on node 0 link 2
bus: 00 index 0 io port: [2000, cfff]
bus: 00 index 1 io port: [0, fff]
bus: 00 index 2 mmio: [fd600000, fe1fffff]
bus: 00 index 3 mmio: [e0000000, e7ffffff]
bus: 00 index 4 mmio: [a0000, bffff]
bus: 00 index 5 mmio: [fec00000, ffffffff]
bus: 00 index 6 mmio: [ec000000, fd4fffff]
bus: 00 index 7 mmio: [820000000, fcffffffff]
bus: [80,84] on node 1 link 1
bus: 80 index 0 io port: [d000, ffff]
bus: 80 index 1 io port: [1000, 1fff]
bus: 80 index 2 mmio: [fe200000, febfffff]
bus: 80 index 3 mmio: [fd500000, fd5fffff]
bus: 80 index 4 mmio: [e8000000, ebffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Denied BIOS AML access to invalid port 0x21+0x1 (PIC0)
ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [IRQM] [20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10 io port: [0xa400-0xa41f]
pci 0000:00:01.1: reg 20 io port: [0x2300-0x233f]
pci 0000:00:01.1: reg 24 io port: [0x2340-0x237f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfe1fc000-0xfe1fcfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfe1fdc00-0xfe1fdcff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xd00-0xd0f]
pci 0000:00:07.0: reg 10 io port: [0xb800-0xb807]
pci 0000:00:07.0: reg 14 io port: [0xb400-0xb403]
pci 0000:00:07.0: reg 18 io port: [0xb000-0xb007]
pci 0000:00:07.0: reg 1c io port: [0xac00-0xac03]
pci 0000:00:07.0: reg 20 io port: [0xa800-0xa80f]
pci 0000:00:07.0: reg 24 32bit mmio: [0xfe1fe000-0xfe1fefff]
pci 0000:00:08.0: reg 10 io port: [0xcc00-0xcc07]
pci 0000:00:08.0: reg 14 io port: [0xc800-0xc803]
pci 0000:00:08.0: reg 18 io port: [0xc400-0xc407]
pci 0000:00:08.0: reg 1c io port: [0xc000-0xc003]
pci 0000:00:08.0: reg 20 io port: [0xbc00-0xbc0f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfe1ff000-0xfe1fffff]
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:05:06.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:05:06.0: reg 14 32bit mmio: [0xfdc00000-0xfdc3ffff]
pci 0000:05:06.0: reg 18 io port: [0x9000-0x907f]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:07.0: reg 10 32bit mmio: [0xfe0ff800-0xfe0fffff]
pci 0000:05:07.0: reg 14 32bit mmio: [0xfe0f8000-0xfe0fbfff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfe0fffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xfb400000-0xfd3fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfd7f0000-0xfd7fffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:0c.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfd6f0000-0xfd6fffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0d.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:80)
pci 0000:80:01.0: reg 14 32bit mmio: [0xfebfc000-0xfebfcfff]
pci 0000:80:08.0: reg 10 io port: [0xfc00-0xfc07]
pci 0000:80:08.0: reg 14 io port: [0xf800-0xf803]
pci 0000:80:08.0: reg 18 io port: [0xf400-0xf407]
pci 0000:80:08.0: reg 1c io port: [0xf000-0xf003]
pci 0000:80:08.0: reg 20 io port: [0xec00-0xec0f]
pci 0000:80:08.0: reg 24 32bit mmio: [0xfebfd000-0xfebfdfff]
pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0d.0: PME# disabled
pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0e.0: PME# disabled
pci 0000:80:10.0: Enabling HT MSI Mapping
pci 0000:80:10.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff]
pci 0000:80:11.0: Enabling HT MSI Mapping
pci 0000:80:11.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff]
pci 0000:82:03.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:82:03.0: reg 14 64bit mmio: [0xfeafc000-0xfeafffff]
pci 0000:82:03.0: reg 1c 64bit mmio: [0xfeae0000-0xfeaeffff]
pci 0000:82:03.0: reg 30 32bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:82:03.0: supports D1 D2
pci 0000:80:10.0: bridge io port: [0xd000-0xdfff]
pci 0000:80:10.0: bridge 32bit mmio: [0xfe200000-0xfeafffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - EE, should be EB [20081204] SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KBinit_memory_mapping: 00000000f4000000-00000000f8000000
00f4000000 - 00f8000000 page 2Mlast_map_addr: f8000000 end: f8000000
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x190-0x193 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xffb80000-0xfffffffe has been reserved
system 00:07: iomem range 0xdfefc000-0xdfefcfff could not be reserved
system 00:07: iomem range 0xdfefd000-0xdfefd3ff could not be reserved
system 00:07: iomem range 0xdfefe000-0xdfefe3ff could not be reserved
system 00:07: iomem range 0xdfeff000-0xdfefffff could not be reserved
system 00:07: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:08: ioport range 0xca2-0xca3 has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:08: iomem range 0xfe200000-0xfebfffff could not be reserved
system 00:08: iomem range 0xfd500000-0xfd5fffff has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
Switched to high resolution mode on CPU 0
pci 0000:00:09.0: IO window: 0x9000-0x9fff
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 6
pci 0000:00:09.0: MEM window: 0xfd800000-0xfe0fffff
pci 0000:00:09.0: PREFETCH window: 0x000000fb400000-0x000000fd3fffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xfd700000-0xfd7fffff pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfd600000-0xfd6fffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: disabled pci 0000:00:0e.0: MEM window: disabled pci 0000:00:0e.0: PREFETCH window: disabled
pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:80:0d.0: PCI bridge, secondary bus 0000:84
pci 0000:80:0d.0: IO window: disabled pci 0000:80:0d.0: MEM window: disabled pci 0000:80:0d.0: PREFETCH window: disabled pci 0000:80:0e.0: PCI bridge, secondary bus 0000:83 pci 0000:80:0e.0: IO window: disabled pci 0000:80:0e.0: MEM window: disabled pci 0000:80:0e.0: PREFETCH window: disabled pci 0000:80:10.0: PCI bridge, secondary bus 0000:82 pci 0000:80:10.0: IO window: 0xd000-0xdfff pci 0000:80:10.0: MEM window: 0xfe200000-0xfeafffff pci 0000:80:10.0: PREFETCH window: disabled pci 0000:80:11.0: PCI bridge, secondary bus 0000:81 pci 0000:80:11.0: IO window: disabled pci 0000:80:11.0: MEM window: disabled pci 0000:80:11.0: PREFETCH window: disabled
pci 0000:80:0d.0: setting latency timer to 64
pci 0000:80:0e.0: setting latency timer to 64pci_bus 0000:00: resource 0 io: [0x2000-0xcfff]pci_bus 0000:00: resource 1 io: [0x00-0xfff]pci_bus 0000:00: resource 2 mem: [0xfd600000-0xfe1fffff]pci_bus 0000:00: resource 3 mem: [0xe0000000-0xe7ffffff]pci_bus 0000:00: resource 4 mem: [0x0a0000-0x0bffff]pci_bus 0000:00: resource 5 mem: [0xfec00000-0xffffffff]pci_bus 0000:00: resource 6 mem: [0xec000000-0xfd4fffff]pci_bus 0000:00: resource 7 mem: [0x820000000-0xfcffffffff]pci_bus 0000:05: resource 0 io: [0x9000-0x9fff]pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfe0fffff]pci_bus 0000:05: resource 2 mem: [0xfb400000-0xfd3fffff]pci_bus 0000:05: resource 3 io: [0x2000-0xcfff]pci_bus 0000:05: resource 4 io: [0x00-0xfff]pci_bus 0000:05: resource 5 mem: [0xfd600000-0xfe1fffff]pci_bus 0000:05: resource 6 mem: [0xe0000000-0xe7ffffff]pci_bus 0000:05: resource 7 mem: [0x0a0000-0x0bffff]pci_bus 0000:05: resource 8 mem: [0xfec00000-0xffffffff]pci_bus 0000:05: resource 9 mem: [0xec000000-0xfd4fffff]pci_bus 0000:05: resource 10 mem: [0x820000000-0xfcffffffff]pci_bus 0000:04: resource 0 mem: [0x0-0x0]pci_bus 0000:04: resource 1 mem: [0x0-0x0]pci_bus 0000:04: resource 2 mem: [0x0-0x0]pci_bus 0000:04: resource 3 mem: [0x0-0x0]pci_bus 0000:03: resource 0 mem: [0x0-0x0]pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff]pci_bus 0000:03: resource 2 mem: [0x0-0x0]pci_bus 0000:03: resource 3 mem: [0x0-0x0]pci_bus 0000:02: resource 0 mem: [0x0-0x0]pci_bus 0000:02: resource 1 mem: [0xfd600000-0xfd6fffff]pci_bus 0000:02: resource 2 mem: [0x0-0x0]pci_bus 0000:02: resource 3 mem: [0x0-0x0]pci_bus 0000:01: resource 0 mem: [0x0-0x0]pci_bus 0000:01: resource 1 mem: [0x0-0x0]pci_bus 0000:01: resource 2 mem: [0x0-0x0]pci_bus 0000:01: resource 3 mem: [0x0-0x0]pci_bus 0000:80: resource 0 io: [0xd000-0xffff]pci_bus 0000:80: resource 1 io: [0x1000-0x1fff]pci_bus 0000:80: resource 2 mem: [0xfe200000-0xfebfffff]pci_bus 0000:80: resource 3 mem: [0xfd500000-0xfd5fffff]pci_bus 0000:80: resource 4 mem: [0xe8000000-0xebffffff]pci_bus 0000:84: resource 0 mem: [0x0-0x0]pci_bus 0000:84: resource 1 mem: [0x0-0x0]pci_bus 0000:84: resource 2 mem: [0x0-0x0]pci_bus 0000:84: resource 3 mem: [0x0-0x0]pci_bus 0000:83: resource 0 mem: [0x0-0x0]pci_bus 0000:83: resource 1 mem: [0x0-0x0]pci_bus 0000:83: resource 2 mem: [0x0-0x0]pci_bus 0000:83: resource 3 mem: [0x0-0x0]pci_bus 0000:82: resource 0 io: [0xd000-0xdfff]pci_bus 0000:82: resource 1 mem: [0xfe200000-0xfeafffff]pci_bus 0000:82: resource 2 mem: [0x0-0x0]pci_bus 0000:82: resource 3 mem: [0x0-0x0]pci_bus 0000:81: resource 0 mem: [0x0-0x0]pci_bus 0000:81: resource 1 mem: [0x0-0x0]pci_bus 0000:81: resource 2 mem: [0x0-0x0]pci_bus 0000:81: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NTFS driver 2.1.29 [Flags: R/W].
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 32768
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:80:00.0: Enabling HT MSI Mapping
pci 0000:80:0d.0: Found disabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:0d.0: Enabling HT MSI Mapping
pci 0000:80:0e.0: Found disabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:0e.0: Enabling HT MSI Mapping
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 86 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 87 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: irq 88 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: irq 89 for MSI/MSI-X
pcieport-driver 0000:80:0d.0: setting latency timer to 64
pcieport-driver 0000:80:0d.0: irq 90 for MSI/MSI-X
pcieport-driver 0000:80:0e.0: setting latency timer to 64
pcieport-driver 0000:80:0e.0: irq 91 for MSI/MSI-X
lp: driver loaded but no devices found
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.97 (December 10, 2008)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
tg3 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fd
eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
tg3 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: PME# disabled
eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:d0:68:12:f6:fc
eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Adaptec aacraid driver 1.1-5[2456]-ms
QLogic Fibre Channel HBA Driver: 8.03.00-k2
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methodssata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 22
ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 22
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21sata_nv 0000:00:08.0: PCI INT A -> Link[LTIE] -> GSI 21 (level, low) -> IRQ 21sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 21
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 21
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 47sata_nv 0000:80:08.0: PCI INT A -> Link[LT2E] -> GSI 47 (level, low) -> IRQ 47sata_nv 0000:80:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 47
ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 47
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)pata_amd 0000:00:06.0: version 0.3.11pata_amd 0000:00:06.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd00 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd08 irq 15
ata7.01: ATAPI: TSSTcorpCD-ROM TS-L162C, MO00, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:54:0x14)
ata7.01: configured for UDMA/33
scsi 6:0:1:0: CD-ROM TSSTcorp CD-ROM TS-L162C MO00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:1:0: Attached scsi CD-ROM sr0
sr 6:0:1:0: Attached scsi generic sg0 type 5
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
mptsas 0000:82:03.0: PCI INT A -> GSI 75 (level, low) -> IRQ 75
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 B1: Capabilities={Initiator}
mptsas 0000:82:03.0: irq 92 for MSI/MSI-X
mptbase: ioc0: PCI-MSI enabled
scsi8 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=92
scsi 8:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:0:0: Attached scsi generic sg1 type 0
scsi 8:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:1:0: Attached scsi generic sg2 type 0
scsi 8:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 8:1:0:0: [sda] Attached SCSI disk
sd 8:1:0:0: Attached scsi generic sg3 type 0
Fusion MPT misc device (ioctl) driver 3.04.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: I/O resource nForce2_smbus [0x2300-0x233f] conflicts with ACPI region SMRG [0x2300-0x2304]
ACPI: Device needs an ACPI driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2300
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2340
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
md: raid1 personality registered for level 1
raid6: int64x1 2541 MB/s
raid6: int64x2 3388 MB/s
raid6: int64x4 3276 MB/s
raid6: int64x8 2263 MB/s
raid6: sse2x1 3888 MB/s
raid6: sse2x2 5188 MB/s
raid6: sse2x4 5261 MB/s
raid6: using algorithm sse2x4 (5261 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (16384 buckets, 65536 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.NF_TPROXY: Transparent proxy support initialized, version 4.1.0NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
UDF-fs: No VRS found
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
VFS: Mounted root (xfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 372k freed
Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Quoted 8 lines · [email protected] wrote:
Quoted 2 lines · Yinghai Lu
please try two patches at the same time on 2.6.29-rc5. don't apply other patch.
I did a git checkout -f HEAD then applied these two patches and the result works.
good. MSI does work on your system now.
mptsas 0000:82:03.0: PCI INT A -> GSI 75 (level, low) -> IRQ 75
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 B1: Capabilities={Initiator}
mptsas 0000:82:03.0: irq 92 for MSI/MSI-X
mptbase: ioc0: PCI-MSI enabled
scsi8 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=92
scsi 8:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:0:0: Attached scsi generic sg1 type 0
scsi 8:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5
scsi 8:0:1:0: Attached scsi generic sg2 type 0
scsi 8:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 8:1:0:0: [sda] 285155328 512-byte hardware sectors: (145 GB/135 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 8:1:0:0: [sda] Attached SCSI disk
sd 8:1:0:0: Attached scsi generic sg3 type 0
YH
Quoted 8 lines · [email protected] wrote:
Quoted 2 lines · Yinghai Lu
please try two patches at the same time on 2.6.29-rc5. don't apply other patch.
I did a git checkout -f HEAD then applied these two patches and the result works.
but should have
pci 0000:80:10.0: Enabling HT MSI Mapping
pci 0000:80:11.0: Enabling HT MSI Mapping
because previous patch have
pci 0000:80:10.0: Found disabled HT MSI Mapping
pci 0000:80:10.0: MSI quirk detected; subordinate MSI disabled pci 0000:80:11.0: Found disabled HT MSI Mapping
pci 0000:80:11.0: MSI quirk detected; subordinate MSI disabled
YH
Quoted 10 lines · Yinghai Lu
Quoted 7 lines · [email protected] wrote:
Quoted 2 lines · Yinghai Lu
please try two patches at the same time on 2.6.29-rc5. don't apply other patch.
I did a git checkout -f HEAD then applied these two patches and the result works.
but should have
Quoted 9 lines
pci 0000:80:10.0: Enabling HT MSI Mapping
pci 0000:80:11.0: Enabling HT MSI Mappingbecause previous patch have
pci 0000:80:10.0: Found disabled HT MSI Mapping
pci 0000:80:10.0: MSI quirk detected; subordinate MSI disabled pci 0000:80:11.0: Found disabled HT MSI Mapping
pci 0000:80:11.0: MSI quirk detected; subordinate MSI disabled
ok i saw that...
pci 0000:80:10.0: Enabling HT MSI Mapping
pci 0000:80:10.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff] pci 0000:80:11.0: Enabling HT MSI Mapping
pci 0000:80:11.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff]
it appears early.
that patch enabling MSI does work...
YH
PATCH 1/1 pci: enable MSI on 8132
In reply to [email protected]Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable it
--- drivers/pci/quirks.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/quirks.c +3 -1
@@ -1981,7 +1981,6 @@ static void __devinit quirk_msi_ht_cap(sDECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE , quirk_msi_ht_cap); -/* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */
@@ -2032,6 +2031,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SPCI_DEVICE_ID_SERVERWORKS_HT1000_PXB , ht_enable_msi_mapping); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device.
Re: [PATCH] pci: enable MSI on 8132
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Jesse, I think this should go into Linus' tree sooner rather than later.
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Re: [PATCH] pci: enable MSI on 8132
Quoted 9 lines · Matthew Wilcox
Quoted 8 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable it
Quoted 6 lines
Quoted 2 lines
Reported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
David Lang
Re: [PATCH] pci: enable MSI on 8132
Quoted 14 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 12 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Quoted 7 lines
Quoted 3 lines
Reviewed-by Matthew Wilcox <[email protected]>Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
I sent mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch to the maintainers a week ago and it was ignored, along with everything else. If this happens again I shall merge it under my own cognisance, along with everything else.
Re: [PATCH] pci: enable MSI on 8132
Quoted 20 lines · Andrew Morton
Subject: Re: [PATCH] pci: enable MSI on 8132
Quoted 16 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 14 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
I'm not sure. I know that 2.6.24 Debian EThch-and-a-half worked, 2.6.27+ failed. how critical is it to narrow down exactly where the problem crept in?
Yinghai Lu, Matthew Wilcox,
can either of you identify where the problem would have appeared?
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
I don't know. the current -git kernel fails, but with these two patches works. I haven't tried backporting these patches (if there are any changes at all needed I probably won't be able to do it)
David Lang
Quoted 6 lines
I sent mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch to the maintainers a week ago and it was ignored, along with everything else. If this happens again I shall merge it under my own cognisance, along with everything else.
Re: [PATCH] pci: enable MSI on 8132
Quoted 27 lines · On Wed, Feb 18, 2009 at 10:18:20AM -0800, [email protected] wrote:
Quoted 25 lines · Andrew Morton
Subject: Re: [PATCH] pci: enable MSI on 8132
Quoted 21 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 9 lines · Matthew Wilcox
Quoted 8 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itQuoted 6 lines
Quoted 2 lines
Reported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Quoted 5 lines
Quoted 1 line
Which kernel version introduced the regression?
I'm not sure. I know that 2.6.24 Debian EThch-and-a-half worked, 2.6.27+ failed. how critical is it to narrow down exactly where the problem crept in?
If .27 fails, that's all we need to know, as only .27 and .28 are being maintained by the -stable person :)
thanks,
greg k-h
James Bottomley
maintainerRe: [PATCH] pci: enable MSI on 8132
In reply to Andrew MortonQuoted 18 lines · Andrew Morton
Quoted 16 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 14 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Technically, it's not a regression. The MSI problem has always been there, it was just exposed when the SAS card switched to using MSI by default. It's fixed by the bridge quirk ... of course it's unclear how many more bridges with problems there are.
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
Quoted 4 lines
I sent mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch to the maintainers a week ago and it was ignored, along with everything else. If this happens again I shall merge it under my own cognisance, along with everything else.
Yes, they've been a bit unresponsive. I'm not unhappy with the current
situation, since MSI is globally disabled for fusion at the moment (so we shouldn't get any more MSI problem reports), so I'm happy to wait and see what they want to do.
James
Re: [PATCH] pci: enable MSI on 8132
Quoted 32 lines · James Bottomley
Quoted 18 lines · Andrew Morton
Quoted 16 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 14 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Technically, it's not a regression. The MSI problem has always been there, it was just exposed when the SAS card switched to using MSI by default. It's fixed by the bridge quirk ... of course it's unclear how many more bridges with problems there are.
Quoted 7 lines
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
actually, some of the failed tests were using the 2.6.29-rc5+ git tree pulled last evening. so that should have included any fixes that went into -rc2
David Lang
Quoted 14 lines
Quoted 4 lines
I sent mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch to the maintainers a week ago and it was ignored, along with everything else. If this happens again I shall merge it under my own cognisance, along with everything else.
Yes, they've been a bit unresponsive. I'm not unhappy with the current
situation, since MSI is globally disabled for fusion at the moment (so we shouldn't get any more MSI problem reports), so I'm happy to wait and see what they want to do.James
Re: [PATCH] pci: enable MSI on 8132
In reply to James BottomleyQuoted 10 lines · James Bottomley
Quoted 2 lines · Andrew Morton
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
so for 2.6.26, 27, 28 need pci-enable-msi-on-8132.patch
2.6.29 need pci-enable-msi-on-8132.patch and mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch
YH
James Bottomley
maintainerRe: [PATCH] pci: enable MSI on 8132
Quoted 6 lines · Yinghai Lu
Quoted 5 lines · James Bottomley
Quoted 2 lines · Andrew Morton
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
Quoted 7 lines
Quoted 5 lines
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
so for 2.6.26, 27, 28 need pci-enable-msi-on-8132.patch
I'm a bit lost with the names, but if that's the PCI quirk fix, then yes
Quoted 1 line
2.6.29 need pci-enable-msi-on-8132.patch and mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch
Like I said, I'm happy to have MSI completely disabled until LSI wants to comment, so no ... only the PCI quirk fix. The true fix is to have the drivers participate in dynamic testing of MSI IRQ routing, but I've somewhat lost sight of that.
James
Re: [PATCH] pci: enable MSI on 8132
Quoted 6 lines · James Bottomley
Quoted 5 lines · Yinghai Lu
Quoted 4 lines · James Bottomley
Quoted 2 lines · Andrew Morton
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
so for 2.6.26, 27, 28 need pci-enable-msi-on-8132.patch
I'm a bit lost with the names, but if that's the PCI quirk fix, then yes
yes
Quoted 7 lines
Quoted 2 lines
2.6.29 need pci-enable-msi-on-8132.patch and mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch
Like I said, I'm happy to have MSI completely disabled until LSI wants to comment, so no ... only the PCI quirk fix. The true fix is to have the drivers participate in dynamic testing of MSI IRQ routing, but I've somewhat lost sight of that.
[PATCH] mpt: fix enable lsi sas to use msi as default
Impact: fix bug
the third param in module_param(,,) is perm instead of default value. we still need to assign default at first.
--- drivers/message/fusion/mptbase.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/message/fusion/mptbase.c +2 -2
@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);MODULE_PARM_DESC (mpt_msi_enable_fc," Enable MSI Support for FC \ controllers (default=0)" ); -static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +static int mpt_msi_enable_sas =1 ; +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ controllers (default=1)" );
or you want
[PATCH] mpt: fix disable lsi sas to use msi as default
Impact: fix bug
the third param in module_param(,,) is perm instead of default value. we still need to assign default at first.
--- drivers/message/fusion/mptbase.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/message/fusion/mptbase.c +2 -2
@@ -91,9 +91,9 @@ MODULE_PARM_DESC(mpt_msi_enable_fc, " En controllers (default=0)"); static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ -controllers (default=1)" ); +controllers (default=0)" );static int mpt_channel_mapping;
anyway we need to fix the typo.
YH
Re: [PATCH] pci: enable MSI on 8132
In reply to James BottomleyQuoted 4 lines · James Bottomley
Like I said, I'm happy to have MSI completely disabled until LSI wants to comment, so no ... only the PCI quirk fix. The true fix is to have the drivers participate in dynamic testing of MSI IRQ routing, but I've somewhat lost sight of that.
That's not really a fix at all, just additional, unneeded overhead for 99% of users. We don't need our drivers bloated with self-check code for all the components in our various computer chips...
Jeff
James Bottomley
maintainerRe: [PATCH] pci: enable MSI on 8132
Quoted 9 lines · Jeff Garzik
Quoted 4 lines · James Bottomley
Like I said, I'm happy to have MSI completely disabled until LSI wants to comment, so no ... only the PCI quirk fix. The true fix is to have the drivers participate in dynamic testing of MSI IRQ routing, but I've somewhat lost sight of that.
That's not really a fix at all, just additional, unneeded overhead for 99% of users. We don't need our drivers bloated with self-check code for all the components in our various computer chips...
So you think the current per driver variably named parameter to turn off MSI is better? Especially as most of the users who trip across a platform having MSI problems don't even know that the storage failure is caused by MSI, let alone how to find the parameter to fix the problem.
James
Re: [PATCH] pci: enable MSI on 8132
In reply to James BottomleyQuoted 32 lines · On Wed, 18 Feb 2009 18:38:04 +0000 James Bottomley…
Quoted 18 lines · Andrew Morton
Quoted 16 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 14 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Technically, it's not a regression. The MSI problem has always been there, it was just exposed when the SAS card switched to using MSI by default. It's fixed by the bridge quirk ... of course it's unclear how many more bridges with problems there are.
Quoted 7 lines
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
<scratches head>
So it should be the case that _either_ of mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch and pci-enable-msi-on-8132.patch would fix David's machine?
Re: [PATCH] pci: enable MSI on 8132
Quoted 37 lines · Andrew Morton
Quoted 27 lines · On Wed, 18 Feb 2009 18:38:04 +0000 James Bottomley…
Quoted 14 lines · Andrew Morton
Quoted 12 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 10 lines · Matthew Wilcox
Quoted 9 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Quoted 7 lines
Quoted 6 lines
Quoted 3 lines
Reviewed-by Matthew Wilcox <[email protected]>Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Technically, it's not a regression. The MSI problem has always been there, it was just exposed when the SAS card switched to using MSI by default. It's fixed by the bridge quirk ... of course it's unclear how many more bridges with problems there are.
Quoted 6 lines
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
Quoted 5 lines
<scratches head>
So it should be the case that _either_ of mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch and pci-enable-msi-on-8132.patch would fix David's machine?
On David's machine:
for kernel after 2.6.29-rc2, it should work, because that typo actually disable the MSI for kernel from 2.6.26 to 2.6.28, MSI is enabled for MPT sas, so it need pci-enable-msi-on-8132.patch.
for 2.6.29, we need to fix that typo anyway. LIS guys seems to like to enable MSI in that case...
YH
James Bottomley
maintainerRe: [PATCH] pci: enable MSI on 8132
In reply to Andrew MortonQuoted 38 lines · Andrew Morton
Quoted 35 lines · On Wed, 18 Feb 2009 18:38:04 +0000 James Bottomley…
Quoted 18 lines · Andrew Morton
Quoted 16 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 14 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Technically, it's not a regression. The MSI problem has always been there, it was just exposed when the SAS card switched to using MSI by default. It's fixed by the bridge quirk ... of course it's unclear how many more bridges with problems there are.
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
Quoted 6 lines
Quoted 4 lines
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
<scratches head>
OK, back on the ball; the names of the patches you're referring to are in master:/home/akpm/public_html/mmotm/broken-out
Quoted 3 lines
So it should be the case that _either_ of mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch and pci-enable-msi-on-8132.patch would fix David's machine?
No. pci-enable-msi-on-8132.patch alone should fix the box. Without it, the MSI routing isn't working properly.
The fact that MSI is affecting fusion is caused by this patch:
commit 23a274c8a5adafc74a66f16988776fc7dd6f6e51
Author: Prakash, Sathya <[email protected]> Date: Fri Mar 7 15:53:21 2008 +0530
[SCSI] mpt fusion: Enable MSI by default for SAS controllers
However that wasn't correctly implemented and had to be fixed, but the bottom line is that with this patch as fixes, fusion now tries to enable MSI for the SAS card (and has since 2.6.26)
A recent patch that went in to 2.6.29-rc2 was
commit e382968ba618e016ff7922dff9a6140c2f9108c8
Author: Kashyap, Desai <[email protected]> Date: Thu Jan 8 14:27:16 2009 +0530
[SCSI] mpt fusion: Add separate msi enable disable for FC,SPI,SAS
This was misimplemented and actually disables MSI globally in the driver (contrary to what LSI wanted to do).
What mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch is fix this and re-enable MSI by default on SAS cards (going back to the position we were in after 23a274c8a5adafc74a66f16988776fc7dd6f6e51).
What I'm saying is I'm happy to wait for LSI to sort out the current mess ... hopefully dynamically, and in the meantime, MSI being globally disabled for fusion isn't really a problem.
James
RE: [PATCH] pci: enable MSI on 8132
In reply to James BottomleyApologies for late response on this thread.
Considering the fact that the enabling MSI has issues with some unknown boards we will turn off the MSI for all the type of controllers (including the SAS) and will send the corrected patch soon (with proper module description). Till we find out a way to dynamically decide whether we can enable MSI without any issues, we don't want to set the module parameter to enable MSI by default for SAS controllers.
Thanks
Sathya
-----Original Message-----
From: James Bottomley [mailto:[email protected]]
Sent: Thursday, February 19, 2009 12:08 AM
To: Andrew Morton
Cc: [email protected]; Matthew Wilcox; Yinghai Lu; Jesse Barnes; linux-kernel; [email protected]; DL-MPT Fusion Linux; [email protected]
Subject: Re: [PATCH] pci: enable MSI on 8132
Quoted 18 lines · Andrew Morton
Quoted 16 lines · On Wed, 18 Feb 2009 04:27:28 -0800 (PST) [email protected] wrote:
Quoted 14 lines · Matthew Wilcox
Quoted 10 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Reviewed-by Matthew Wilcox <[email protected]>
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Jesse, I think this should go into Linus' tree sooner rather than later.
please forward to -stable as well. this is a regression since the card works with older kernels.
Which kernel version introduced the regression?
Technically, it's not a regression. The MSI problem has always been there, it was just exposed when the SAS card switched to using MSI by default. It's fixed by the bridge quirk ... of course it's unclear how many more bridges with problems there are.
Quoted 2 lines
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as well, to fix this regression?
No ... it's a separate issue. MSI was enabled for fusion SAS in 2.6.26; the problem msi patch which the above corrects actually has the effect of disabling MSI for fusion and went into 2.6.29-rc2, which isn't a kernel that's been tested here.
Quoted 4 lines
I sent mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch to the maintainers a week ago and it was ignored, along with everything else. If this happens again I shall merge it under my own cognisance, along with everything else.
Yes, they've been a bit unresponsive. I'm not unhappy with the current
situation, since MSI is globally disabled for fusion at the moment (so we shouldn't get any more MSI problem reports), so I'm happy to wait and see what they want to do.
James
Jesse Barnes
AppliedRe: [PATCH] pci: enable MSI on 8132
In reply to Yinghai LuQuoted 9 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Applied to my for-linus branch, thanks.
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Re: [PATCH] pci: enable MSI on 8132
In reply to Yinghai LuQuoted 27 lines · Yinghai Lu
Impact: workaround BIOS that doesn't enable that bit
David reported that LSI sas doesn't work with MSI. it turns out that BIOS doesn't enable HT MSI 8132 does support HT MSI.
add quirk to enable itReported-by David Lang <[email protected]>Signed-off-by Yinghai Lu <[email protected]>--- drivers/pci/quirks.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)Index:
linux-2.6/drivers/pci/quirks.c
===================================================================drivers/pci/quirks.c +0
-1@@ -1981,7 +1981,6 @@ static void __devinit quirk_msi_ht_cap(sDECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_SERVERWORKS ,PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE , quirk_msi_ht_cap); -/* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */
drivers/pci/quirks.c DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S · line 2036
Quoted 6 lines
drivers/pci/quirks.c +3
-0@@ -2032,6 +2031,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SPCI_DEVICE_ID_SERVERWORKS_HT1000_PXB , ht_enable_msi_mapping); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_8132_BRIDGE , + ht_enable_msi_mapping); +
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge? Essentially the code for nv_msi_ht_cap_quirk could potentially be applied to all bridges as it is currently for NVIDIA and ALi bridges..
Re: [PATCH] pci: enable MSI on 8132
Quoted 3 lines · Robert Hancock
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge?
The code should be under CONFIG_X86 because the rules for enabling HT MSI mappings are different for other architectures. But otherwise I can't think of a reason.
Quoted 3 lines
Essentially
the code fornv_msi_ht_cap_quirkcould potentially be applied to all bridges as it is currently for NVIDIA and ALi bridges..
Sounds like it would save a fair amount of grief.
Eric
Re: [PATCH] pci: enable MSI on 8132
Quoted 7 lines · Eric W. Biederman
Quoted 3 lines · Robert Hancock
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge?
The code should be under
CONFIG_X86because the rules for enabling HT MSI mappings are different for other architectures. But otherwise I can't think of a reason.
move to arch/x86/pci/fixup.c?
it seems some other arch do support HT ... powerpc, mips?
Quoted 6 lines
Quoted 4 lines
Essentially
the code fornv_msi_ht_cap_quirkcould potentially be applied to all bridges as it is currently for NVIDIA and ALi bridges..Sounds like it would save a fair amount of grief.
it seems there is some difference.
8132 is some kind of HT tunnel, and the bridge is acctually pci-x bridge.
mcp55 and ck804: is HT end device with several pcie bridges.
also 8131 has problem with HT MSI?
YH
Re: [PATCH] pci: enable MSI on 8132
Quoted 7 lines · Yinghai Lu
Quoted 5 lines · Eric W. Biederman
Quoted 3 lines · Robert Hancock
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge?
Quoted 8 lines
Quoted 1 line
The code should be under
CONFIG_X86because the rules for enabling HT MSImappings
Quoted 1 line
are different for other architectures. But otherwise I can't think of a
reason.
move to
arch/x86/pci/fixup.c?it seems some other arch do support HT ... powerpc, mips?
The difference is that there is a magic address on x86 that all MSI cycles are sent to. I think it is 0xfffe0000. In an msi to HT mapping capability it is necessary to program in the address to listen for msi packets. That is very much an arch dependent thing.
Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
Essentially
the code fornv_msi_ht_cap_quirkcould potentially be applied to all bridgesas
Quoted 3 lines
Quoted 1 line
it is currently for NVIDIA and ALi bridges..
Sounds like it would save a fair amount of grief.
it seems there is some difference.
8132 is some kind of HT tunnel, and the bridge is acctually pci-x bridge.mcp55 and ck804: is HT end device with several pcie bridges.
Not really they are all hypertransport to pci bridges (of some flavor). But any hypertransport device is allowed to have a mapping capability. In which case they can implement normal MSI interrupts instead of the weird hypertransport ones.
Quoted 1 line
also 8131 has problem with HT MSI?
The 8131 does not implement the msi to hypertransport mapping capability so it can not support MSI interrupts.
In general on x86, if a device has a MSI to hypertransport mapping capability then we can enable it and mark that devices and all downstream devices as supporting MSI.
Eric
Re: [PATCH] pci: enable MSI on 8132
Quoted 29 lines · Eric W. Biederman
Quoted 5 lines · Yinghai Lu
Quoted 3 lines · Eric W. Biederman
Quoted 2 lines · Robert Hancock
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge?
Quoted 8 lines
Quoted 1 line
The code should be under
CONFIG_X86because the rules for enabling HT MSImappings
Quoted 1 line
are different for other architectures. But otherwise I can't think of a
reason.
move to
arch/x86/pci/fixup.c?it seems some other arch do support HT ... powerpc, mips?
The difference is that there is a magic address on x86 that all MSI cycles are sent to. I think it is
0xfffe0000. In an msi to HT mapping capability it is necessary to program in the address to listen for msi packets. That is very much an arch dependent thing.Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Essentially
the code fornv_msi_ht_cap_quirkcould potentially be applied to all bridgesas
Quoted 2 lines
Quoted 1 line
it is currently for NVIDIA and ALi bridges..
Sounds like it would save a fair amount of grief.
it seems there is some difference.
8132 is some kind of HT tunnel, and the bridge is acctually pci-x bridge.
Quoted 6 lines
Quoted 1 line
mcp55 and ck804: is HT end device with several pcie bridges.
Not really they are all hypertransport to pci bridges (of some flavor). But any hypertransport device is allowed to have a mapping capability. In which case they can implement normal MSI interrupts instead of the weird hypertransport ones.
for mcp55
00:00.0 is HT device
00:0b.0 00:0c.0, 00:0d.0, 00:0e.0, 00:0f.0 are pcie bridge.
current quirks will check 00:00.0 HT MSI is set, it will not set that in those bridges any more.
Quoted 5 lines
Quoted 2 lines
also 8131 has problem with HT MSI?
The 8131 does not implement the msi to hypertransport mapping capability so it can not support MSI interrupts.
it seems there is one quirks to disable MSI for 8131. /* Disable MSI on chipsets that are known to not support it */ static void __devinit quirk_disable_msi(struct pci_dev *dev)
{
if (dev->subordinate) {
dev_warn(&dev->dev, "MSI quirk detected; "
"subordinate MSI disabled\n");
dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
}
}DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
Quoted 5 lines
In general on x86, if a device has a MSI to hypertransport mapping capability then we can enable it and mark that devices and all downstream devices as supporting MSI.
looks some aggressive.
YH
Re: [PATCH] pci: enable MSI on 8132
Quoted 56 lines · Yinghai Lu
Quoted 25 lines · Eric W. Biederman
Quoted 5 lines · Yinghai Lu
Quoted 3 lines · Eric W. Biederman
Quoted 2 lines · Robert Hancock
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge?
Quoted 8 lines
Quoted 1 line
The code should be under
CONFIG_X86because the rules for enabling HT MSImappings
Quoted 1 line
are different for other architectures. But otherwise I can't think of a
reason.
move to
arch/x86/pci/fixup.c?it seems some other arch do support HT ... powerpc, mips?
The difference is that there is a magic address on x86 that all MSI cycles are sent to. I think it is
0xfffe0000. In an msi to HT mapping capability it is necessary to program in the address to listen for msi packets. That is very much an arch dependent thing.Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Essentially
the code fornv_msi_ht_cap_quirkcould potentially be applied to all bridgesas
Quoted 2 lines
Quoted 1 line
it is currently for NVIDIA and ALi bridges..
Sounds like it would save a fair amount of grief.
Quoted 8 lines
Quoted 4 lines
it seems there is some difference.
8132 is some kind of HT tunnel, and the bridge is acctually pci-x bridge.mcp55 and ck804: is HT end device with several pcie bridges.
Not really they are all hypertransport to pci bridges (of some flavor). But any hypertransport device is allowed to have a mapping capability. In which case they can implement normal MSI interrupts instead of the weird hypertransport ones.
for mcp55
00:00.0 is HT device
00:0b.0 00:0c.0, 00:0d.0, 00:0e.0, 00:0f.0 are pcie bridge.
current quirks will check 00:00.0 HT MSI is set, it will not set that in those bridges any more.Quoted 3 lines
Quoted 1 line
also 8131 has problem with HT MSI?
The 8131 does not implement the msi to hypertransport mapping capability so it can not support MSI interrupts.
it seems there is one quirks to disable MSI for 8131. /* Disable MSI on chipsets that are known to not support it */ static void
__devinitquirk_disable_msi(struct pci_dev *dev){ if (dev->subordinate) { dev_warn(&dev->dev, "MSI quirk detected; " "subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } }
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);Quoted 1 line
Quoted 5 lines
Quoted 3 lines
In general on x86, if a device has a MSI to hypertransport mapping capability then we can enable it and mark that devices and all downstream devices as supporting MSI.
looks some aggressive.
Not really.. we don't really "mark devices as supporting MSI" right now, we generally mark them as not supporting it in certain cases and by default assume they do. So if a quirk doesn't hit on a particular chipset, then we go ahead and enable it. If there's some reason it doesn't work or we don't do something that's needed to make it work, and the driver requests it, we'll use it and it just won't work properly. So it's not really any more aggressive than what we have now..
It seems like we have kind of a random mix of MSI quirks related to MSI mappings:
Serverworks HT2000: check if PCIE bridge has MSI mapping enabled, if not disable MSI on PCIE bridge subordinate bus
NVIDIA CK804: check if HT MSI mapping enabled either on root bridge or on the PCIE bridge device, if not, disable MSI on PCIE bridge subordinate bus
Serverworks HT1000 (and proposed AMD 8132): just switch on HT MSI mapping on bridge device
All NVIDIA and ALi (which does appear to overlap with the CK804 one): If bus 0 device 0 function 0 is an HT slave, enable its MSI mapping, otherwise disable it
It seems like these could be combined into something like:
-For all buses, check if any device on the bus is an HT slave, if so, enable its HT MSI mapping. If not, disable it. (Should we also disable MSI on the bus if we disable it or there's no mapping capability? I would guess we likely should..)
-For all PCI bridges other than device 0 function 0 that have HT MSI Mapping capability, check if our bus (or an upstream one?) has a device marked as an HT slave with enabled MSI mapping. If so, then enable the capability, if not then disable it and disable MSI on subordinate bus.
Essentially it should make sure that the mappings are enabled all the way up the chain, and if they can't be then we disable MSI. This could be totally wrong though, I don't know HT that well, hopefully someone else does :-)
There's the issue that Eric pointed out about the MSI mapping address possibly not being set up on some platforms. However, right now we'll just blindly try and use MSI on such setups anyway, so I don't see it's really worsening the situation.
We would also still need the 8131 quirk, since presumably it doesn't have HT MSI Mapping capability so we wouldn't know to disable MSI on it from the above.
Re: [PATCH] pci: enable MSI on 8132
Quoted 10 lines · On Samstag 21 Februar 2009 19:59:42 Robert Hancock wrote:
Quoted 9 lines · Yinghai Lu
Quoted 8 lines · Eric W. Biederman
Quoted 7 lines · Yinghai Lu
On Fri, Feb 20, 2009 at 11:50 PM, Eric W. Biederman
Quoted 4 lines · <[email protected]> wrote:
Quoted 3 lines · Robert Hancock
Is there a reason why we can't just enable the HT MSI mapping for any bridge device that has that PCI capability and is underneath an HT bridge?
[try 2]
Hi,
I just could hunt down one MSI related problem on my nvidia MCP51 board. It seems the nvida msi quirk enables MSI cap for one device too much. Because afterwards the intel_snd_hda driver will hang the kernel when trying to enable msi (and even mess up my text console). I saw this behaviour on every kernel since this quirk was introduced. (At least the intel hda driver doesn't try to enable msi by default). This hack works for me (on 2.6.29-rc5):
--- drivers/pci/quirks.c 2009-02-22 12:44:37.156617230 +0100
+++ /usr/src/linux/drivers/pci/quirks.c 2009-02-22 12:45:05.752616467 +0100 @@ -2018,7 +2018,7 @@
u8 flags;
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
- &flags) == 0) {
+ &flags) == 0 && dev->device != 0x270) { dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
Then the intel hda driver works in MSI mode without problems. Would it be possible to include this as a proper quirk?
The offending device is this:
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Cheers,
Prakash
A full lspci listing:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn-
LWO=16bit DwFcOutEn-
Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn+ ExtCTL- 64b-
Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE-
PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000
00: de 10 f0 02 06 00 b0 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 08 e0 e0 01 22 00 11 11 22 20 11 00
50: 23 06 7f 80 03 05 7f 80 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00
70: 44 44 41 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 1f 00 64 0c 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 61 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 10
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
00: de 10 fa 02 00 01 20 40 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 10 00 21 21 14 00 11 11 00 00 03 00 00 00
60: 21 88 13 02 de 8f e1 1f 08 72 4e 10 02 3f 00 20
70: 10 32 54 0a 10 00 00 00 a0 00 00 00 34 00 31 01
80: 00 00 00 00 00 00 00 00 00 00 50 3f 90 3f 00 00
90: 00 28 00 fe fd 00 00 00 fc ff ff ff ff 03 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 28 00 fe fd 01 01 a0 01 4f 00 00 80 f9 fd 00
e0: 00 00 c9 fe 00 00 00 00 00 fc ff ff 00 00 00 00
f0: 00 00 00 00 c7 02 32 00 00 00 00 00 00 00 00 00
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 fe 02 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 43 10 c0 81 1f 20 1c 20 1f 20 c0 21 00 00 00 00
50: 36 00 38 c9 01 00 00 00 3b 00 3d c9 02 1f 1c 80
60: 02 1f 1c 00 00 00 00 00 02 10 1c a0 02 0c 1c 90
70: 02 10 1c 90 02 14 1c 90 02 0c 1c 80 02 10 1c 80
80: 02 14 1c 80 02 18 1c 80 02 1c 1c 80 01 10 1c 80
90: 02 14 1c 80 11 00 11 00 32 01 00 00 00 00 00 00
a0: c2 00 40 01 10 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 41 23 05 08
c0: fd ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 f8 02 00 00 a0 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 00 00 00 00 02 10 1c 80 02 10 1c a0
50: 02 0c 1c 90 02 10 1c 90 02 14 1c 90 02 0c 1c 80
60: 02 10 1c 80 02 14 1c 80 02 18 1c 80 02 1c 1c 80
70: 01 10 1c 80 1f 20 c0 81 00 00 00 00 3e 30 40 c9
80: 01 00 00 00 44 30 46 c9 02 1f 1c 80 70 20 00 40
90: 89 da 01 09 00 00 00 00 11 00 10 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 08 00 00 00 18 1a 00 00 10 00 02 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0f 01 00 05 00 00 00 00
d0: 00 00 f0 03 00 04 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 60 ea 10 10 18 00 00 20 00 00 00 00 00 00 00 00
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00: de 10 f9 02 06 00 a0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: ef dd 7b 2f f7 de 7b 2f f7 de 7b 2f f7 02 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
70: 0a 00 00 00 03 00 00 00 25 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 05 00 00 00 04 00 00 00
90: 03 04 00 00 01 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: ff 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] #00 [00fe]
Capabilities: [fc] #00 [0000]
00: de 10 ff 02 06 00 b0 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 17 00 00 00 00 fe fe 00 00 fe fe 00 00 fe fe 00
50: 00 fe fe 00 00 fe fe 00 00 fe fe 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 7f 02 02 01 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 08 00 00 00 00 00 00 00 00 80 cb fe 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 7e 02 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 43 10 c0 81 11 00 00 00 75 07 00 00 11 00 00 00
50: 75 06 00 00 40 00 60 00 40 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04
b0: ff ff 03 00 10 11 00 00 ac 10 20 00 30 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: nvidia
Kernel modules: nvidia
00: de 10 40 02 07 00 b0 00 a2 00 00 03 00 00 00 00
10: 00 00 00 fc 0c 00 00 d0 00 00 00 00 04 00 00 fb
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
30: 00 00 00 00 48 00 00 00 00 00 00 00 05 01 00 00
40: 43 10 cd 81 00 00 00 00 01 50 02 00 00 00 00 00
50: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 00 00 04 00 00 00 00 00 00 00 01 00 00 00
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: 00 00 90 01 00 00 00 08 00 00 00 00 ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn-
LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 800MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz-
1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE-
PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000
00: de 10 70 02 06 00 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 08 e0 e9 01 22 20 00 00 d0 00 00 00
50: 23 05 7f 80 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 55 00
80: 23 55 55 00 fa 00 64 0c 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00: de 10 60 02 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 00 f0 ff fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff c5 00 00 00 00 00 05 19 00 00 00 03
80: 09 80 00 2d 01 21 00 00 c0 00 00 01 00 00 00 00
90: 00 00 00 00 00 00 00 00 21 47 65 b7 ef cd 00 00
a0: 03 00 10 c1 00 00 00 00 00 00 00 00 00 00 00 00
b0: 90 02 ef 02 00 08 5f 08 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 64 02 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 4c 00 00 41 4c 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
40: 43 10 c0 81 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 40 00 00 01 44 00 00 01 48 00 00 00 00 00 00
70: 01 00 00 00 00 00 c8 fe 00 00 fe fe 01 20 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 01 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 10 10 04 00 00 a0 00 00 80 30 00 00 41 44 44 11
f0: 5a ff 5f bf 00 00 00 c0 10 00 00 00 00 00 00 00
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 72 02 00 04 a0 00 a3 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 10 00 00 10 00 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 02 03 00 00 12 00 00 00 02 00 00 00 10 01 12 00
70: 32 33 00 00 03 00 00 00 00 00 00 00 12 01 00 00
80: 10 00 00 00 00 00 00 00 00 00 00 00 30 02 00 00
90: 00 00 00 00 01 20 00 00 01 00 00 00 00 09 00 00
a0: 01 02 00 00 00 10 00 00 05 00 00 00 01 00 00 00
b0: 00 10 00 80 01 00 00 80 00 00 00 00 02 00 00 00
c0: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00: de 10 6d 02 07 00 b0 00 a3 10 03 0c 00 00 80 00
10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 03 01
40: 43 10 c0 81 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00: de 10 6e 02 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 02 03 01
40: 43 10 c0 81 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 0a 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 64 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00
b0: 00 11 22 33 00 00 00 00 ff 00 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Device f043:81c0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f400 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00: de 10 65 02 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f4 00 00 00 00 00 00 00 00 00 00 43 f0 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 43 f0 c0 81 01 00 02 00 00 00 00 00 00 00 00 00
50: 03 f0 01 00 00 00 00 00 99 99 99 20 2a 00 a8 20
60: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 90 20 21 00 00 02 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv
00: de 10 66 02 07 00 b0 00 a1 85 01 01 00 00 00 00
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
20: 01 e0 00 00 00 d0 02 fe 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 43 10 c0 81 01 b0 02 00 00 00 00 00 00 00 00 00
50: 07 00 00 00 00 00 00 00 a8 a8 a8 20 6a 00 99 20
60: 00 00 00 c0 51 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 00 50 36 22 00 00 08 80 9e f7 2d 3b
90: 00 00 58 1b 00 00 00 00 06 00 06 10 00 00 01 01
a0: 14 10 00 2a 00 00 00 00 00 00 00 00 33 33 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 00 e0
e0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv
00: de 10 67 02 07 00 b0 00 a1 85 01 01 00 00 00 00
10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00
20: 01 cc 00 00 00 c0 02 fe 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 43 10 c0 81 01 b0 02 00 00 00 00 00 00 00 00 00
50: 07 00 00 00 00 00 00 00 a8 a8 a8 20 6a 00 99 20
60: 00 00 00 c0 51 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 db 46 60 f0 00 00 c6 2c ad 4c f4 fa
90: 00 00 15 20 00 00 00 00 06 00 06 10 00 00 01 01
a0: 14 10 00 00 00 00 00 00 00 00 00 00 33 33 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 01 00 02 6b 42 00 00 00 00 00 00 00 90 00 00 00
e0: 01 00 02 6b 42 00 00 00 00 00 00 00 0e 00 f0 07
f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128 I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000
00: de 10 6f 02 07 00 b0 00 a2 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 80 b0 b0 80 02
20: d0 fd d0 fd e0 fd e0 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 02
40: 00 00 03 00 01 00 02 00 07 00 00 00 00 00 44 00
50: 00 00 fe cf 00 00 00 00 ff 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 00 00 00 00
c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81cb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 24
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask+ 64bit+ Count=1/1 Enable+
Address: 00000000fee0300c Data: 4169
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel
00: de 10 6c 02 06 04 b0 00 a2 00 03 04 00 00 80 00
10: 00 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cb 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
40: 43 10 cb 81 01 50 02 c0 00 00 00 00 01 01 0f 00
50: 05 6c 81 01 0c 30 e0 fe 00 00 00 00 69 41 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 46 00 29 00 00 00 00 00 00
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 816a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Kernel driver in use: forcedeth
00: de 10 69 02 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 b0 02 fe 01 c8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 6a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
40: 43 10 6a 81 01 00 02 fe 00 01 00 00 0b 00 00 10
50: 05 6c 84 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn-
LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 20 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 69 01 61 01 00 00 01 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00
90: 03 00 d0 00 00 ff df 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 00 f0 00 00 02 fe 00
b0: 03 00 e0 00 80 1f e0 00 00 00 00 00 00 00 00 00
c0: 13 b0 00 00 00 f0 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 02 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3d f8 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 05 00 00 00 00 00 00 00 24 f2 7d 0c 20 13 22 00
90: 10 0c 01 00 5b 80 10 77 24 00 00 80 20 25 2b 00
a0: ef 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: a4 1e 87 29 88 00 00 00 b4 35 61 00 ea bf 0f 1f
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 61 90 8c 27 00 14 48 00 48 ac 1a 0b 94 fe 81 99
e0: 7d 99 f5 b3 d9 3e 80 04 03 f2 93 16 fa b7 fb a5
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: 00 01 00 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 80 e4 a8 85 19 00 00 00 00 00 00 00 00 00 26 08
60: 4a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 32 51 21 40 70 50 00 2a 00 08 17 21 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 10 00 00 00 00 ac 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 30 35 22
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 c0 08 26 26 26 00
e0: 00 00 00 00 20 1a 52 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 b2 0f 04 00
01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 4c 10 23 80 06 00 10 02 00 10 00 0c 08 20 00 00
10: 00 f0 df fd 00 80 df fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 8b 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 02 04
40: 00 00 00 00 01 00 02 7e 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 10 00 00 43 10 8b 80 00 00 01 01
Re: [PATCH] pci: enable MSI on 8132
Prakesh could you try this patch instead?
I think the problem is simply that the MCP55 ht mapping capability requires an address to be programed into it and it wasn't in your case.
It should not hurt to enable one msi ht mapping capability too many.
drivers/pci/quirks.c +11 -2
@@ -2017,10 +2017,19 @@ static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)while (pos && ttl--) {u8 flags; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , &flags)) +return ; + +if (!(flags &HT_MSI_FLAGS_ENABLE )) {dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); +if (!(flags &HT_MSI_FLAGS_FIXED )) { +pci_write_config_dword (dev, pos +HT_MSI_ADDR_LO , + (HT_MSI_FIXED_ADDR &HT_MSI_FIXED_ADDR )); +pci_write_config_dword (dev, pos +HT_MSI_ADDR_HI , + (HT_MSI_FIXED_ADDR >>32 )); + } +pci_write_config_byte (dev, pos +HT_MSI_FLAGS , flags |HT_MSI_FLAGS_ENABLE ); }
Re: [PATCH] pci: enable MSI on 8132
Quoted 7 lines · On Sonntag 22 Februar 2009 13:54:54 Eric W. Biederman wrote:
Prakesh could you try this patch instead?
I think the problem is simply that the MCP55 ht mapping capability requires an address to be programed into it and it wasn't in your case.
It should not hurt to enable one msi ht mapping capability too many.
I tried it, but unfortunately doesn't help. I run into the same issue.
Quoted 32 lines
drivers/pci/quirks.c +11
-3@@ -2017,10 +2017,19 @@ static void __devinit ht_enable_msi_mapping(struct pci_dev *dev) while (pos && ttl--) {u8 flags; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , &flags)) +return ; + +if (!(flags &HT_MSI_FLAGS_ENABLE )) {dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); +if (!(flags &HT_MSI_FLAGS_FIXED )) { +pci_write_config_dword (dev, pos +HT_MSI_ADDR_LO , + (HT_MSI_FIXED_ADDR &HT_MSI_FIXED_ADDR )); +pci_write_config_dword (dev, pos +HT_MSI_ADDR_HI , + (HT_MSI_FIXED_ADDR >>32 )); + } +pci_write_config_byte (dev, pos +HT_MSI_FLAGS , flags |HT_MSI_FLAGS_ENABLE ); } --To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] pci: enable MSI on 8132
your system have one HT chain c51->mcp51
BIOS enabled HT-MSI on c51, and hda ...
it seems pci quirks should not be used enable HT MSI on mcp51 again...
YH
Re: [PATCH] pci: enable MSI on 8132
Quoted 5 lines · Yinghai Lu
your system have one HT chain
c51->mcp51BIOS enabled HT-MSI on c51, and hda ...
it seems pci quirks should not be used enable HT MSI on mcp51 again...
another explanation:
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03
Link Frequency 0: 800MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81cb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 24
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask+ 64bit+ Count=1/1 Enable+
Address: 00000000fee0300c Data: 4169
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
nv_msi_ht_cap_quirk need some rework
static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
int pos, ttl = 48;
/*
* HT MSI mapping should be disabled on devices that are below
* a non-Hypertransport host bridge. Locate the host bridge...
*/
host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (host_bridge == NULL) {
dev_warn(&dev->dev,
"nv_msi_ht_cap_quirk didn't locate host bridge\n");
return;
}
pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
if (pos != 0) {
/* Host bridge is to HT */
ht_enable_msi_mapping(dev);
return;
}in c51-mcp51 case, for 00:10.1, host bridge should be 00:09.0 (mcp51) instead of 00:00.0 (c51) and ht msi for 00:10.1 is already enabled, dev 00:09.0 should not be enabled HT msi again.
YH
Re: [PATCH] pci: enable MSI on 8132
In reply to Prakash Punnoorplease try, you may need Eric's patch too.
[PATCH] pci: don't enable too much HT MSI mapping
Impact: fix bug
Prakesh reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only enable ht_msi and try to avoid to enable ht_msi both.
--- drivers/pci/quirks.c | 115 ++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 100 insertions(+), 15 deletions(-)
drivers/pci/quirks.c +100 -15
@@ -2050,11 +2050,101 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVPCI_DEVICE_ID_NVIDIA_NVENET_15 , nvenet_msi_disable); -static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge; +int pos; +int i, dev_no; +int found =0 ; + + dev_no = dev->devfn >>3 ; +for (i = dev_no; i >=0 ; i--) { + host_bridge =pci_get_slot (dev->bus,PCI_DEVFN (i,0 )); +if (!host_bridge) +continue ; + + pos =pci_find_ht_capability (host_bridge,HT_CAPTYPE_SLAVE ); +if (pos !=0 ) { + found =1 ; +break ; + } +pci_dev_put (host_bridge); + } + +if (!found) +return ; + +/* root did that ! */ +if (msi_ht_cap_enabled (host_bridge)) + goto out; + +ht_enable_msi_mapping (dev); + +out: +pci_dev_put (host_bridge); +} + +static void __devinit ht_disable_msi_mapping (struct pci_dev *dev) +{int pos, ttl =48 ; + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); + +pci_write_config_byte (dev, pos +HT_MSI_FLAGS , + flags & ~HT_MSI_FLAGS_ENABLE ); + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } +} + +static int __devinit ht_check_msi_mapping (struct pci_dev *dev) +{ +int pos, ttl =48 ; +int found =0 ; + +/* check if there is HT MSI cap or enabled on this device */ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (found <1 ) + found =1 ; +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +if (flags &HT_MSI_FLAGS_ENABLE ) { +if (found <2 ) { + found =2 ; +break ; + } + } + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } + +return found; +} + +static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +{ +struct pci_dev *host_bridge; +int pos; +int found; + +/* check if there is HT MSI cap or enabled on this device */ + found =ht_check_msi_mapping (dev); + +/* no HT MSI CAP */ +if (found ==0 ) +return ; +/* * HT MSI mapping should be disabled on devices that are below * a non-Hypertransport host bridge. Locate the host bridge...
@@ -2069,24 +2159,19 @@ static void __devinit nv_msi_ht_cap_quir pos =pci_find_ht_capability (host_bridge,HT_CAPTYPE_SLAVE );if (pos !=0 ) {/* Host bridge is to HT */ -ht_enable_msi_mapping (dev); +if (found ==1 ) { +/* it is not enabled, try to enable it */ +nv_ht_enable_msi_mapping (dev); + }return ; } -/* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); -while (pos && ttl--) { -u8 flags; +/* HT MSI is not enabled */ +if (found ==1 ) +return ; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { -dev_info (&dev->dev,"Disabling HT MSI mapping" ); -pci_write_config_byte (dev, pos +HT_MSI_FLAGS , - flags & ~HT_MSI_FLAGS_ENABLE ); - } - pos =pci_find_next_ht_capability (dev, pos, -HT_CAPTYPE_MSI_MAPPING ); - } +/* Host bridge is not to HT, disable HT MSI mapping on this device */ +ht_disable_msi_mapping (dev); }DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk);
Re: [PATCH] pci: enable MSI on 8132
Quoted 10 lines · On Montag 23 Februar 2009 07:18:34 Yinghai Lu wrote:
please try, you may need Eric's patch too.
[PATCH] pci: don't enable too much HT MSI mapping
Impact: fix bug
Prakesh reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
Quoted 5 lines
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msiand try to avoid to enableht_msiboth.Reported-by Prakesh Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Hi, I can confirm that the patch works nicely with 2.6.29-rc6. (BTW, my name is written with two 'a's...)
Cheers,
Prakash
[snipped patch]
Re: [PATCH] pci: enable MSI on 8132
Quoted 11 lines · Prakash Punnoor
Quoted 10 lines · On Montag 23 Februar 2009 07:18:34 Yinghai Lu wrote:
please try, you may need Eric's patch too.
[PATCH] pci: don't enable too much HT MSI mapping
Impact: fix bug
Prakesh reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
Quoted 8 lines
Quoted 5 lines
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msiand try to avoid to enableht_msiboth.Reported-by Prakesh Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Hi, I can confirm that the patch works nicely with 2.6.29-rc6. (BTW, my name is written with two 'a's...)
good, will resend to Jesse.
what are your correct name with two 'a's?
YH
Re: [PATCH] pci: enable MSI on 8132
Quoted 18 lines · On Montag 23 Februar 2009 19:50:33 Yinghai Lu wrote:
Quoted 17 lines · Prakash Punnoor
Quoted 15 lines · On Montag 23 Februar 2009 07:18:34 Yinghai Lu wrote:
please try, you may need Eric's patch too.
[PATCH] pci: don't enable too much HT MSI mapping
Impact: fix bug
Prakesh reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msiand try to avoid to enableht_msiboth.Reported-by Prakesh Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Quoted 7 lines
Quoted 2 lines
Hi, I can confirm that the patch works nicely with 2.6.29-rc6. (BTW, my name is written with two 'a's...)
good, will resend to Jesse.
what are your correct name with two 'a's?
Well, as in my sender field/email: Prakash (not Prakesh)
PATCH 1/1 pci: don't enable too many HT MSI mapping
In reply to Yinghai LuImpact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only enable ht_msi on own root device and try to avoid to enable ht_msi on device following that root dev
--- drivers/pci/quirks.c | 115 ++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 100 insertions(+), 15 deletions(-)
drivers/pci/quirks.c +100 -15
@@ -2050,11 +2050,101 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVPCI_DEVICE_ID_NVIDIA_NVENET_15 , nvenet_msi_disable); -static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge; +int pos; +int i, dev_no; +int found =0 ; + + dev_no = dev->devfn >>3 ; +for (i = dev_no; i >=0 ; i--) { + host_bridge =pci_get_slot (dev->bus,PCI_DEVFN (i,0 )); +if (!host_bridge) +continue ; + + pos =pci_find_ht_capability (host_bridge,HT_CAPTYPE_SLAVE ); +if (pos !=0 ) { + found =1 ; +break ; + } +pci_dev_put (host_bridge); + } + +if (!found) +return ; + +/* root did that ! */ +if (msi_ht_cap_enabled (host_bridge)) + goto out; + +ht_enable_msi_mapping (dev); + +out: +pci_dev_put (host_bridge); +} + +static void __devinit ht_disable_msi_mapping (struct pci_dev *dev) +{int pos, ttl =48 ; + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); + +pci_write_config_byte (dev, pos +HT_MSI_FLAGS , + flags & ~HT_MSI_FLAGS_ENABLE ); + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } +} + +static int __devinit ht_check_msi_mapping (struct pci_dev *dev) +{ +int pos, ttl =48 ; +int found =0 ; + +/* check if there is HT MSI cap or enabled on this device */ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (found <1 ) + found =1 ; +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +if (flags &HT_MSI_FLAGS_ENABLE ) { +if (found <2 ) { + found =2 ; +break ; + } + } + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } + +return found; +} + +static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +{ +struct pci_dev *host_bridge; +int pos; +int found; + +/* check if there is HT MSI cap or enabled on this device */ + found =ht_check_msi_mapping (dev); + +/* no HT MSI CAP */ +if (found ==0 ) +return ; +/* * HT MSI mapping should be disabled on devices that are below * a non-Hypertransport host bridge. Locate the host bridge...
@@ -2069,24 +2159,19 @@ static void __devinit nv_msi_ht_cap_quir pos =pci_find_ht_capability (host_bridge,HT_CAPTYPE_SLAVE );if (pos !=0 ) {/* Host bridge is to HT */ -ht_enable_msi_mapping (dev); +if (found ==1 ) { +/* it is not enabled, try to enable it */ +nv_ht_enable_msi_mapping (dev); + }return ; } -/* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); -while (pos && ttl--) { -u8 flags; +/* HT MSI is not enabled */ +if (found ==1 ) +return ; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { -dev_info (&dev->dev,"Disabling HT MSI mapping" ); -pci_write_config_byte (dev, pos +HT_MSI_FLAGS , - flags & ~HT_MSI_FLAGS_ENABLE ); - } - pos =pci_find_next_ht_capability (dev, pos, -HT_CAPTYPE_MSI_MAPPING ); - } +/* Host bridge is not to HT, disable HT MSI mapping on this device */ +ht_disable_msi_mapping (dev); }DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk);
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 6 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
Quoted 7 lines
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msion own root device and try to avoid to enableht_msion device following that root devReported-by Prakash Punnoor <[email protected]>Tested-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Thanks Yinghai & Prakash, applied this fix to my for-linus branch.
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 11 lines · On Dienstag 24 Februar 2009 18:37:35 Jesse Barnes wrote:
Quoted 10 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msion own root device and try to avoid to enableht_msion device following that root dev
Quoted 5 lines
Quoted 3 lines
Reported-by Prakash Punnoor <[email protected]>Tested-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Thanks Yinghai & Prakash, applied this fix to my for-linus branch.
I am very sorry, but I made a mistake testing this patch. I messed up my kernels and got a false positive and only noticed this now. The patch does NOT work and even makes things worse:
dmesg|grep HT
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
This is exactly the device which shouldn't be MSI enabled for me. On the other hand, it doesn't enable the needed devices anymore.
So please drop this patch.
Regards,
Prakash
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 29 lines · Prakash Punnoor
Quoted 7 lines · On Dienstag 24 Februar 2009 18:37:35 Jesse Barnes wrote:
Quoted 6 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
Quoted 8 lines
Quoted 7 lines
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msion own root device and try to avoid to enableht_msion device following that root devReported-by Prakash Punnoor <[email protected]>Tested-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Thanks Yinghai & Prakash, applied this fix to my for-linus branch.
I am very sorry, but I made a mistake testing this patch. I messed up my kernels and got a false positive and only noticed this now. The patch does NOT work and even makes things worse:
dmesg|grep HT
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
Quoted 3 lines
This is exactly the device which shouldn't be MSI enabled for me. On the other hand, it doesn't enable the needed devices anymore.
please check this one, please power off the system before load the kernel with new patch.
[PATCH] pci: don't enable too much HT MSI mapping -v2
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev
--- drivers/pci/quirks.c | 119 ++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 104 insertions(+), 15 deletions(-)
drivers/pci/quirks.c +104 -15
@@ -2050,10 +2050,104 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVPCI_DEVICE_ID_NVIDIA_NVENET_15 , nvenet_msi_disable); -static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge; +int pos; +int i, dev_no; +int found =0 ; + + dev_no = dev->devfn >>3 ; +for (i = dev_no; i >=0 ; i--) { + host_bridge =pci_get_slot (dev->bus,PCI_DEVFN (i,0 )); +if (!host_bridge) +continue ; + + pos =pci_find_ht_capability (host_bridge,HT_CAPTYPE_SLAVE ); +if (pos !=0 ) { + found =1 ; +break ; + } +pci_dev_put (host_bridge); + } + +if (!found) +return ; + +/* don't enable host_bridge directly here */ +if (host_bridge == dev) + goto out; + +/* root did that ! */ +if (msi_ht_cap_enabled (host_bridge)) + goto out; + +ht_enable_msi_mapping (dev); + +out: +pci_dev_put (host_bridge); +} + +static void __devinit ht_disable_msi_mapping (struct pci_dev *dev) +{ +int pos, ttl =48 ; + + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); + +pci_write_config_byte (dev, pos +HT_MSI_FLAGS , + flags & ~HT_MSI_FLAGS_ENABLE ); + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } +} + +static int __devinit ht_check_msi_mapping (struct pci_dev *dev) +{int pos, ttl =48 ; +int found =0 ; + +/* check if there is HT MSI cap or enabled on this device */ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (found <1 ) + found =1 ; +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +if (flags &HT_MSI_FLAGS_ENABLE ) { +if (found <2 ) { + found =2 ; +break ; + } + } + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } + +return found; +} + +static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +{ +struct pci_dev *host_bridge; +int pos; +int found; + +/* check if there is HT MSI cap or enabled on this device */ + found =ht_check_msi_mapping (dev); + +/* no HT MSI CAP */ +if (found ==0 ) +return ;/* * HT MSI mapping should be disabled on devices that are below
@@ -2069,24 +2163,19 @@ static void __devinit nv_msi_ht_cap_quir pos =pci_find_ht_capability (host_bridge,HT_CAPTYPE_SLAVE );if (pos !=0 ) {/* Host bridge is to HT */ -ht_enable_msi_mapping (dev); +if (found ==1 ) { +/* it is not enabled, try to enable it */ +nv_ht_enable_msi_mapping (dev); + }return ; } -/* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); -while (pos && ttl--) { -u8 flags; +/* HT MSI is not enabled */ +if (found ==1 ) +return ; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { -dev_info (&dev->dev,"Disabling HT MSI mapping" ); -pci_write_config_byte (dev, pos +HT_MSI_FLAGS , - flags & ~HT_MSI_FLAGS_ENABLE ); - } - pos =pci_find_next_ht_capability (dev, pos, -HT_CAPTYPE_MSI_MAPPING ); - } +/* Host bridge is not to HT, disable HT MSI mapping on this device */ +ht_disable_msi_mapping (dev); }DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk);
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 31 lines · On Freitag 27 Februar 2009 21:59:08 Yinghai Lu wrote:
Quoted 30 lines · Prakash Punnoor
Quoted 11 lines · On Dienstag 24 Februar 2009 18:37:35 Jesse Barnes wrote:
Quoted 10 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msion own root device and try to avoid to enableht_msion device following that root devQuoted 5 lines
Quoted 3 lines
Reported-by Prakash Punnoor <[email protected]>Tested-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Thanks Yinghai & Prakash, applied this fix to my for-linus branch.
I am very sorry, but I made a mistake testing this patch. I messed up my kernels and got a false positive and only noticed this now. The patch does NOT work and even makes things worse:
dmesg|grep HT
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
Quoted 5 lines
Quoted 2 lines
This is exactly the device which shouldn't be MSI enabled for me. On the other hand, it doesn't enable the needed devices anymore.
please check this one, please power off the system before load the kernel with new patch.
Well, the problem now is that MSI doesn't get enabled on the needed host bridge 00.0 (device 10de:02f0), so MSI doesn't work at all on my system (but also doesn't hang my system.) I have no idea how to differentiate the 00.0 device from the "forbidden" 09.0 (device 10de:0270) on my system. Perhaps a blacklist is really the best? The original patch by NVidia had a white list, btw, see also here:
http://kerneltrap.org/mailarchive/linux-kernel/2007/11/25/443612/thread
The output of your current patch:
pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
So, ok, MSI gets enabled on the devices as such (good), not enabled on 09.0 (good), but also not on the needed host bridge 00.0 (bad).
BTW, I noticed a typo in the patch. In ht_disable_msi_mapping you want the text to be "Disabling"... instead of
+ dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
And a minor simplification in ht_check_msi_mapping would be instead of
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
just
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ found = 2;
+ break;
+ }
as it is the only place where found is set to something higher than 1 and then the function is exited anyway. Or make the return paths clearer by this change from
+ int pos, ttl = 48;
+ int found = 0;
+
+ /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) {
+ u8 flags;
+
+ if (found < 1)
+ found = 1;
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING); + }
+
+ return found;
to
+ int pos, ttl = 48;
+
+ /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ if (!pos)
+ return 0;
+
+ do {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE)
+ return 2;
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING); + } while (pos && --ttl);
+
+ return 1;
+}
Then at least I would have to think less, under which conditions found takes the values 0, 1 or 2.
Regards,
Prakash
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 57 lines · Prakash Punnoor
Quoted 31 lines · On Freitag 27 Februar 2009 21:59:08 Yinghai Lu wrote:
Quoted 30 lines · Prakash Punnoor
Quoted 11 lines · On Dienstag 24 Februar 2009 18:37:35 Jesse Barnes wrote:
Quoted 10 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only enableht_msion own root device and try to avoid to enableht_msion device following that root devQuoted 5 lines
Quoted 3 lines
Reported-by Prakash Punnoor <[email protected]>Tested-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Thanks Yinghai & Prakash, applied this fix to my for-linus branch.
I am very sorry, but I made a mistake testing this patch. I messed up my kernels and got a false positive and only noticed this now. The patch does NOT work and even makes things worse:
dmesg|grep HT
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI MappingQuoted 5 lines
Quoted 2 lines
This is exactly the device which shouldn't be MSI enabled for me. On the other hand, it doesn't enable the needed devices anymore.
please check this one, please power off the system before load the kernel with new patch.
Well, the problem now is that MSI doesn't get enabled on the needed host bridge 00.0 (device 10de:02f0), so MSI doesn't work at all on my system (but also doesn't hang my system.) I have no idea how to differentiate the 00.0 device from the "forbidden" 09.0 (device 10de:0270) on my system. Perhaps a blacklist is really the best? The original patch by NVidia had a white list, btw, see also here:
http://kerneltrap.org/mailarchive/linux-kernel/2007/11/25/443612/threadThe output of your current patch:
pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
Quoted 2 lines
So, ok, MSI gets enabled on the devices as such (good), not enabled on 09.0 (good), but also not on the needed host bridge 00.0 (bad).
can you post whole bootlog and lspci -vvxxx and lspci -tv and cat /proc/interrupts?
YH
Re: [PATCH] pci: don't enable too many HT MSI mapping
please check this one
v1 is pulled by Linus from Jesse's pci tree already, and v3 is needed to be applied on top of v1
YH
[PATCH] pci: don't enable too much HT MSI mapping -v3
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev
v3: will enable c51...
--- drivers/pci/quirks.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-)
drivers/pci/quirks.c +26 -5
@@ -2077,6 +2077,10 @@ static void __devinit nv_ht_enable_msi_mif (!found)return ; +/* don't enable host_bridge directly here */ +if (host_bridge == dev) + goto out; +/* root did that ! */ if (msi_ht_cap_enabled (host_bridge)) goto out;
@@ -2097,7 +2101,7 @@ static void __devinit ht_disable_msi_mapif (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , &flags) ==0 ) { -dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); +dev_info (&dev->dev,"Disabling HT MSI Mapping\n" );pci_write_config_byte (dev, pos +HT_MSI_FLAGS , flags & ~HT_MSI_FLAGS_ENABLE );
@@ -2135,7 +2139,7 @@ static int __devinit ht_check_msi_mappinreturn found; } -static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +static void __devinit __nv_msi_ht_cap_quirk (struct pci_dev *dev,int all) {struct pci_dev *host_bridge;int pos;
@@ -2164,7 +2168,10 @@ static void __devinit nv_msi_ht_cap_quir/* Host bridge is to HT */ if (found ==1 ) {/* it is not enabled, try to enable it */ -nv_ht_enable_msi_mapping (dev); +if (all) +ht_enable_msi_mapping (dev); +else +nv_ht_enable_msi_mapping (dev); }return ; }
@@ -2176,8 +2183,22 @@ static void __devinit nv_msi_ht_cap_quir/* Host bridge is not to HT, disable HT MSI mapping on this device */ ht_disable_msi_mapping (dev); } -DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk); -DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk); + +static void __devinit nv_msi_ht_cap_quirk_all (struct pci_dev *dev) +{ +return __nv_msi_ht_cap_quirk (dev,1 ); +} + +static void __devinit nv_msi_ht_cap_quirk_leaf (struct pci_dev *dev) +{ +return __nv_msi_ht_cap_quirk (dev,0 ); +} + +/* werid?, c51/mcp51 need c51 ht msi to be enable to make mcp51 ht msi working */ +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f0 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf); + +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);static void __devinit quirk_msi_intx_disable_bug (struct pci_dev *dev) {
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 5 lines · On Samstag 28 Februar 2009 23:43:51 Yinghai Lu wrote:
please check this one
v1 is pulled by Linus from Jesse's pci tree already, and v3 is needed to be applied on top of v1YH
Hi,
yes, this works nicely now. Thanks. (Are you still interested in all the infos you requested in your last email?) But have you looked at the original patch? It might be that your current one is not enough to cover all models. In the original NVidia one following bridges were enabled:
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC0 0x02F0 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC1 0x02F1 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC2 0x02F2 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC3 0x02F3 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC4 0x02F4 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC5 0x02F5 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC6 0x02F6 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_C51_MEMC7 0x02F7
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_MEMC 0x0369
As you can see, the one on my board is the MEMC0. I don't know which revisions have the other ones. The MEMC case had a special bahaviour in the original patch also:
+ bridge_dev = NULL;
+ while ((bridge_dev = pci_get_device(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_MEMC, bridge_dev))
+ != NULL) {
+ pci_enable_msi_ht_cap(bridge_dev);
+ }
Cheers,
Prakash
Re: [PATCH] pci: don't enable too many HT MSI mapping
[PATCH] Enable HT MSI mapping on all known needed NVidia host bridges
v3 of Yinghai Lu's work only enables HT MSI mapping for one specific host bridge. Do this also for all known needed ones as specified by NVidia's original patch.
pci/quirks.c renamed from pci/quirks.c.current +13 -1
@@ -2189,8 +2189,20 @@return __nv_msi_ht_cap_quirk (dev,0 ); } -/* werid?, c51/mcp51 need c51 ht msi to be enable to make mcp51 ht msi working */ +/* Enable HT MSI mapping on following host brigdes */ +/* C51 host bridges */ DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f0 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f1 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f2 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f3 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f4 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f5 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f6 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f7 , nv_msi_ht_cap_quirk_all); +/* MCP55 host bridge */ +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x0369 , nv_msi_ht_cap_quirk_all); + +/* Enable MSI mapping on all regular devices */ DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 16 lines · Prakash Punnoor
[PATCH] Enable HT MSI mapping on all known needed NVidia host bridges
v3 of Yinghai Lu's work only enables HT MSI mapping for one specific host bridge. Do this also for all known needed ones as specified by NVidia's original patch.
Signed-off-by Prakash Punnoor <[email protected]>pci/quirks.c renamed from pci/quirks.c.current +2
-1@@ -2189,8 +2189,20 @@return __nv_msi_ht_cap_quirk (dev,0 ); } -/* werid?, c51/mcp51 need c51 ht msi to be enable to make mcp51 ht msi working */ +/* Enable HT MSI mapping on following host brigdes */ +/* C51 host bridges */
pci/quirks.c line 2203
Quoted 10 lines
pci/quirks.c renamed from pci/quirks.c.current +9
-0DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f0 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f1 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f2 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f3 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f4 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f5 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f6 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f7 , nv_msi_ht_cap_quirk_all); +/* MCP55 host bridge */ +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x0369 , nv_msi_ht_cap_quirk_all);
we may not need this one.
mcp55 is some kind of mcp51 equivent, so we dont't HT MSI for 0x0369
YH
Quoted 5 lines
pci/quirks.c renamed from pci/quirks.c.current +2
-0+ +/* Enable MSI mapping on all regular devices */ DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);
Re: [PATCH] pci: don't enable too many HT MSI mapping
[PATCH] Enable HT MSI mapping on all known needed NVidia host bridges, V2
v3 of Yinghai Lu's work only enables HT MSI mapping for one specific host bridge. Do this also for all C51 ones as specified by NVidia's original patch.
pci/quirks.c renamed from pci/quirks.c.current +10 -1
@@ -2189,8 +2189,17 @@return __nv_msi_ht_cap_quirk (dev,0 ); } -/* werid?, c51/mcp51 need c51 ht msi to be enable to make mcp51 ht msi working */ +/* Enable HT MSI mapping on C51 host brigdes */ DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f0 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f1 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f2 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f3 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f4 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f5 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f6 , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,0x02f7 , nv_msi_ht_cap_quirk_all); + +/* Enable HT MSI mapping on all regular devices */ DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);
Re: [PATCH] pci: don't enable too many HT MSI mapping
Hmmm,
2.6.29-rc7 is released, but the last two patches here in the thread have not been picked up. Why?
Regards,
Prakash
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 5 lines · Prakash Punnoor
Hmmm,
2.6.29-rc7 is released, but the last two patches here in the thread have not been picked up. Why?
Jesse is on vacation...
YH
Re: [PATCH] pci: don't enable too many HT MSI mapping
In reply to Prakash PunnoorQuoted 4 lines · Prakash Punnoor
Hmmm,
2.6.29-rc7 is released, but the last two patches here in the thread have not been picked up. Why?
I'm watching the PCI tree while Jesse is away and I didn't realise these patches were urgent to include. I'll put them in a git tree and send Linus a pull request. I just saw him wandering around with his suitcase, so I think he'll be back home and processing pull requests this evening.
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Re: [PATCH] pci: don't enable too many HT MSI mapping
In reply to Prakash PunnoorQuoted 2 lines · Prakash Punnoor
2.6.29-rc7 is released, but the last two patches here in the thread have not been picked up. Why?
Oh, I meant to say ... we're at -rc7. What is the danger here of this fixing your machine but breaking somebody else's? Is there something we can minimally do that fixes your machine today and then put in a patch for 30-rc1 that is likely to fix other machines?
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 9 lines · Matthew Wilcox
Quoted 2 lines · Prakash Punnoor
2.6.29-rc7 is released, but the last two patches here in the thread have not been picked up. Why?
Oh, I meant to say ... we're at -rc7. What is the danger here of this fixing your machine but breaking somebody else's? Is there something we can minimally do that fixes your machine today and then put in a patch for 30-rc1 that is likely to fix other machines?
please don't apply v3 and prakash patch at this point.
will have one better v4 this weekend.
YH
Re: [PATCH] pci: don't enable too many HT MSI mapping
In reply to Matthew WilcoxQuoted 6 lines · On Donnerstag 05 März 2009 18:15:14 Matthew Wilcox wrote:
Quoted 2 lines · Prakash Punnoor
2.6.29-rc7 is released, but the last two patches here in the thread have not been picked up. Why?
Oh, I meant to say ... we're at -rc7. What is the danger here of this fixing your machine but breaking somebody else's?
There is a danger that less host bridges get HT MSI enabled by the quirk - which might need it after all.
Quoted 3 lines
Is there something we
can minimally do that fixes your machine today and then put in a patch for 30-rc1 that is likely to fix other machines?
Something like this would be minimal and works for me:
pci/quirks.c 2009-03-06 00:37:06.915532269 +0100 renamed from pci/quirks.c.old 2009-03-06 00:34:40.996532222 +0100 +4 -0
@@ -2141,6 +2141,10 @@ int pos; int found; + /* Enabling HT MSI mapping on this device breaks MCP51 */ + if (dev->device == 0x270) + return; + /* check if there is HT MSI cap or enabled on this device */ found = ht_check_msi_mapping(dev);
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 1 line · Prakash Punnoor
Something like this would be minimal and works for me:
Looks appropriate for a -rc7 fix. Unless anyone argues, I'll put this in the pci-fixes tree that I'll push out tomorrow.
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Re: [PATCH] pci: don't enable too many HT MSI mapping
please check v4:
[PATCH] pci: don't enable too much HT MSI mapping -v4
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev
v3: will enable c51...
v4: will enable c51 kind of without leaf too.
--- drivers/pci/quirks.c | 116 ++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 83 insertions(+), 33 deletions(-)
drivers/pci/quirks.c +83 -33
@@ -2053,6 +2053,65 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVPCI_DEVICE_ID_NVIDIA_NVENET_15 , nvenet_msi_disable); +static int __devinit ht_check_msi_mapping (struct pci_dev *dev) +{ +int pos, ttl =48 ; +int found =0 ; + +/* check if there is HT MSI cap or enabled on this device */ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (found <1 ) + found =1 ; +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +if (flags &HT_MSI_FLAGS_ENABLE ) { +if (found <2 ) { + found =2 ; +break ; + } + } + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } + +return found; +} + +static int __devinit host_bridge_with_leaf (struct pci_dev *host_bridge) +{ +struct pci_dev *dev; +int pos; +int i, dev_no; +int found =0 ; + + dev_no = host_bridge->devfn >>3 ; +for (i = dev_no +1 ; i <0x20 ; i++) { + dev =pci_get_slot (host_bridge->bus,PCI_DEVFN (i,0 )); +if (!dev) +continue ; + +/* found next host bridge ?*/ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_SLAVE ); +if (pos !=0 ) { +pci_dev_put (dev); +break ; + } + +if (ht_check_msi_mapping (dev)) { + found =1 ; +pci_dev_put (dev); +break ; + } +pci_dev_put (dev); + } + +return found; +} +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge;
@@ -2077,6 +2136,10 @@ static void __devinit nv_ht_enable_msi_mif (!found)return ; +/* don't enable host_bridge with leaf directly here */ +if (host_bridge == dev &&host_bridge_with_leaf (host_bridge)) + goto out; +/* root did that ! */ if (msi_ht_cap_enabled (host_bridge)) goto out;
@@ -2097,7 +2160,7 @@ static void __devinit ht_disable_msi_mapif (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , &flags) ==0 ) { -dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); +dev_info (&dev->dev,"Disabling HT MSI Mapping\n" );pci_write_config_byte (dev, pos +HT_MSI_FLAGS , flags & ~HT_MSI_FLAGS_ENABLE );
@@ -2107,35 +2170,7 @@ static void __devinit ht_disable_msi_map } } -static int __devinit ht_check_msi_mapping (struct pci_dev *dev) -{ -int pos, ttl =48 ; -int found =0 ; - -/* check if there is HT MSI cap or enabled on this device */ - pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); -while (pos && ttl--) { -u8 flags; - -if (found <1 ) - found =1 ; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { -if (flags &HT_MSI_FLAGS_ENABLE ) { -if (found <2 ) { - found =2 ; -break ; - } - } - } - pos =pci_find_next_ht_capability (dev, pos, -HT_CAPTYPE_MSI_MAPPING ); - } - -return found; -} - -static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +static void __devinit __nv_msi_ht_cap_quirk (struct pci_dev *dev,int all) {struct pci_dev *host_bridge;int pos;
@@ -2164,7 +2199,10 @@ static void __devinit nv_msi_ht_cap_quir/* Host bridge is to HT */ if (found ==1 ) {/* it is not enabled, try to enable it */ -nv_ht_enable_msi_mapping (dev); +if (all) +ht_enable_msi_mapping (dev); +else +nv_ht_enable_msi_mapping (dev); }return ; }
@@ -2176,8 +2214,20 @@ static void __devinit nv_msi_ht_cap_quir/* Host bridge is not to HT, disable HT MSI mapping on this device */ ht_disable_msi_mapping (dev); } -DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk); -DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk); + +static void __devinit nv_msi_ht_cap_quirk_all (struct pci_dev *dev) +{ +return __nv_msi_ht_cap_quirk (dev,1 ); +} + +static void __devinit nv_msi_ht_cap_quirk_leaf (struct pci_dev *dev) +{ +return __nv_msi_ht_cap_quirk (dev,0 ); +} + +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf); + +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);static void __devinit quirk_msi_intx_disable_bug (struct pci_dev *dev) {
Re: [PATCH] pci: don't enable too many HT MSI mapping
Quoted 1 line · On Freitag 06 März 2009 05:15:45 Yinghai Lu wrote:
please check v4:
v4 also works for me - nice. In case v4 doesn't get merged but instead the minimal version, this should be added also:
[patch, trivial] Fix typo in message while disabling HT MSI mapping
pci/quirks.c renamed from pci/quirks.c.old +1 -1
@@ -2097,7 +2097,7 @@if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , &flags) ==0 ) { -dev_info (&dev->dev,"Enabling HT MSI Mapping\n" ); +dev_info (&dev->dev,"Disabling HT MSI Mapping\n" );pci_write_config_byte (dev, pos +HT_MSI_FLAGS , flags & ~HT_MSI_FLAGS_ENABLE );
PATCH 1/1 pci: don't enable too much HT MSI mapping -v5 -resend
In reply to Yinghai LuImpact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev
v3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainline
--- drivers/pci/quirks.c | 118 +++++++++++++++++++++++++++++++++++---------------- 1 file changed, 82 insertions(+), 36 deletions(-)
drivers/pci/quirks.c +82 -36
@@ -2078,6 +2078,65 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVPCI_DEVICE_ID_NVIDIA_NVENET_15 , nvenet_msi_disable); +static int __devinit ht_check_msi_mapping (struct pci_dev *dev) +{ +int pos, ttl =48 ; +int found =0 ; + +/* check if there is HT MSI cap or enabled on this device */ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); +while (pos && ttl--) { +u8 flags; + +if (found <1 ) + found =1 ; +if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , + &flags) ==0 ) { +if (flags &HT_MSI_FLAGS_ENABLE ) { +if (found <2 ) { + found =2 ; +break ; + } + } + } + pos =pci_find_next_ht_capability (dev, pos, +HT_CAPTYPE_MSI_MAPPING ); + } + +return found; +} + +static int __devinit host_bridge_with_leaf (struct pci_dev *host_bridge) +{ +struct pci_dev *dev; +int pos; +int i, dev_no; +int found =0 ; + + dev_no = host_bridge->devfn >>3 ; +for (i = dev_no +1 ; i <0x20 ; i++) { + dev =pci_get_slot (host_bridge->bus,PCI_DEVFN (i,0 )); +if (!dev) +continue ; + +/* found next host bridge ?*/ + pos =pci_find_ht_capability (dev,HT_CAPTYPE_SLAVE ); +if (pos !=0 ) { +pci_dev_put (dev); +break ; + } + +if (ht_check_msi_mapping (dev)) { + found =1 ; +pci_dev_put (dev); +break ; + } +pci_dev_put (dev); + } + +return found; +} +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge;
@@ -2102,6 +2161,10 @@ static void __devinit nv_ht_enable_msi_mif (!found)return ; +/* don't enable host_bridge with leaf directly here */ +if (host_bridge == dev &&host_bridge_with_leaf (host_bridge)) + goto out; +/* root did that ! */ if (msi_ht_cap_enabled (host_bridge)) goto out;
@@ -2132,44 +2195,12 @@ static void __devinit ht_disable_msi_map } } -static int __devinit ht_check_msi_mapping (struct pci_dev *dev) -{ -int pos, ttl =48 ; -int found =0 ; - -/* check if there is HT MSI cap or enabled on this device */ - pos =pci_find_ht_capability (dev,HT_CAPTYPE_MSI_MAPPING ); -while (pos && ttl--) { -u8 flags; - -if (found <1 ) - found =1 ; -if (pci_read_config_byte (dev, pos +HT_MSI_FLAGS , - &flags) ==0 ) { -if (flags &HT_MSI_FLAGS_ENABLE ) { -if (found <2 ) { - found =2 ; -break ; - } - } - } - pos =pci_find_next_ht_capability (dev, pos, -HT_CAPTYPE_MSI_MAPPING ); - } - -return found; -} - -static void __devinit nv_msi_ht_cap_quirk (struct pci_dev *dev) +static void __devinit __nv_msi_ht_cap_quirk (struct pci_dev *dev,int all) {struct pci_dev *host_bridge;int pos;int found; -/* Enabling HT MSI mapping on this device breaks MCP51 */ -if (dev->device ==0x270 ) -return ; -/* check if there is HT MSI cap or enabled on this device */ found =ht_check_msi_mapping (dev);
@@ -2193,7 +2224,10 @@ static void __devinit nv_msi_ht_cap_quir/* Host bridge is to HT */ if (found ==1 ) {/* it is not enabled, try to enable it */ -nv_ht_enable_msi_mapping (dev); +if (all) +ht_enable_msi_mapping (dev); +else +nv_ht_enable_msi_mapping (dev); }return ; }
@@ -2205,8 +2239,20 @@ static void __devinit nv_msi_ht_cap_quir/* Host bridge is not to HT, disable HT MSI mapping on this device */ ht_disable_msi_mapping (dev); } -DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk); -DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk); + +static void __devinit nv_msi_ht_cap_quirk_all (struct pci_dev *dev) +{ +return __nv_msi_ht_cap_quirk (dev,1 ); +} + +static void __devinit nv_msi_ht_cap_quirk_leaf (struct pci_dev *dev) +{ +return __nv_msi_ht_cap_quirk (dev,0 ); +} + +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf); + +DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);static void __devinit quirk_msi_intx_disable_bug (struct pci_dev *dev) {
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 11 lines · On Fri, 20 Mar 2009 19:29:41 -0700 Yinghai Lu <[email protected]> wrote:
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root dev
Quoted 7 lines
v3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineReported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainline
Quoted 8 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into quirks.c and it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):
dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
Regards,
Prakash
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 45 lines · On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote:
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineQuoted 8 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into
quirks.cand it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
Quoted 2 lines
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
I sprinkeld a few debugging messages around in the code and looking at that I don't see how the code can enable NMSI for device 00.0, but not for 09.0:
Both will exit here:
if (host_bridge == dev && host_bridge_with_leaf(host_bridge))
in nv_ht_enable_msi_mapping, so it seems host_bridge_with_leaf returns true for both. I think because my hw configuration changed a bit (inserted one PCIe card) comparing to last time I tested old v4 version, this doesn't work anymore - so the leaf check alone is not realiable, I guess. For me adding something like this, makes it work: (I hope the description makes sense, as I am just refering to the function names and trying to guess its meanings.)
Patch is against linux-next branch of pci tree.
[patch] pci: enable MSI on host bridge without checking for leaves
On C51 the host bridge needs to be enabled, but the MCP51 host bridge not. So don't check for leaves on the main host bridge.
pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 renamed from pci/quirks.c.old 2009-03-28 14:06:07.249250095 +0100 +4 -2
@@ -2292,8 +2292,10 @@ static void __devinit __nv_msi_ht_cap_qu if (pos != 0) { /* Host bridge is to HT */ if (found == 1) { - /* it is not enabled, try to enable it */ - if (all) + /* it is not enabled, try to enable it; + * don't check for leaves on host bridge + */ + if (all || host_bridge->devfn == dev->devfn) ht_enable_msi_mapping(dev); else nv_ht_enable_msi_mapping(dev);
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 76 lines · Prakash Punnoor
Quoted 43 lines · On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote:
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineQuoted 7 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into
quirks.cand it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI MappingQuoted 2 lines
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
I sprinkeld a few debugging messages around in the code and looking at that I don't see how the code can enable NMSI for device 00.0, but not for 09.0:
Both will exit here:
if (
host_bridge== dev &&host_bridge_with_leaf(host_bridge))in
nv_ht_enable_msi_mapping, so it seemshost_bridge_with_leafreturns true for both. I think because my hw configuration changed a bit (inserted one PCIe card) comparing to last time I tested old v4 version, this doesn't work anymore - so the leaf check alone is not realiable, I guess. For me adding something like this, makes it work: (I hope the description makes sense, as I am just refering to the function names and trying to guess its meanings.)Patch is against linux-next branch of pci tree.
[patch] pci: enable MSI on host bridge without checking for leaves
On C51 the host bridge needs to be enabled, but the MCP51 host bridge not. So don't check for leaves on the main host bridge.
Signed-off-by Prakash Punnoor <[email protected]>pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 renamed from pci/quirks.c.old 2009-03-28 14:06:07.249250095 +0100 +0
-0@@ -2292,8 +2292,10 @@ static void __devinit __nv_msi_ht_cap_qu if (pos != 0) { /* Host bridge is to HT */
pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 static void __devinit __nv_msi_ht_cap_qu · line 2301
Quoted 10 lines
pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 renamed from pci/quirks.c.old 2009-03-28 14:06:07.249250095 +0100 +4
-2if (found == 1) { - /* it is not enabled, try to enable it */ - if (all) + /* it is not enabled, try to enable it; + * don't check for leaves on host bridge + */ + if (all || host_bridge->devfn == dev->devfn) ht_enable_msi_mapping(dev); else nv_ht_enable_msi_mapping(dev);
seems it is not right, it may enable your 09.0 again.
YH
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 85 lines · On Samstag 28 März 2009 21:18:19 Yinghai Lu wrote:
Quoted 84 lines · Prakash Punnoor
Quoted 46 lines · On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote:
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineQuoted 8 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into
quirks.cand it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI MappingQuoted 2 lines
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
I sprinkeld a few debugging messages around in the code and looking at that I don't see how the code can enable NMSI for device 00.0, but not for 09.0:
Both will exit here:
if (
host_bridge== dev &&host_bridge_with_leaf(host_bridge))in
nv_ht_enable_msi_mapping, so it seemshost_bridge_with_leafreturns true for both. I think because my hw configuration changed a bit (inserted one PCIe card) comparing to last time I tested old v4 version, this doesn't work anymore - so the leaf check alone is not realiable, I guess. For me adding something like this, makes it work: (I hope the description makes sense, as I am just refering to the function names and trying to guess its meanings.)Patch is against linux-next branch of pci tree.
[patch] pci: enable MSI on host bridge without checking for leaves
On C51 the host bridge needs to be enabled, but the MCP51 host bridge not. So don't check for leaves on the main host bridge.
Signed-off-by Prakash Punnoor <[email protected]>pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 renamed from pci/quirks.c.old 2009-03-28 14:06:07.249250095 +0100 +1
-2@@ -2292,8 +2292,10 @@ static void __devinit __nv_msi_ht_cap_qu if (pos != 0) { /* Host bridge is to HT */ if (found == 1) { - /* it is not enabled, try to enable it */ - if (all) + /* it is not enabled, try to enable it;
Quoted 8 lines
pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 static void __devinit __nv_msi_ht_cap_qu · line 2301
Quoted 6 lines
pci/quirks.c 2009-03-28 14:22:35.027510230 +0100 renamed from pci/quirks.c.old 2009-03-28 14:06:07.249250095 +0100 +3
-0+ * don't check for leaves on host bridge + */ + if (all || host_bridge->devfn == dev->devfn) ht_enable_msi_mapping(dev); else nv_ht_enable_msi_mapping(dev);seems it is not right, it may enable your 09.0 again.
No if you look into the whole function, you'll see that host_bridge is device
0:0. ( host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); )
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
In reply to Prakash PunnoorQuoted 49 lines · Prakash Punnoor
Quoted 45 lines · On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote:
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineQuoted 8 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into
quirks.cand it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI MappingQuoted 2 lines
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
Quoted 7 lines
I sprinkeld a few debugging messages around in the code and looking at that I don't see how the code can enable NMSI for device 00.0, but not for 09.0:
Both will exit here:
if (
host_bridge== dev &&host_bridge_with_leaf(host_bridge))
where is
0000:00:03.0: Enabling HT MSI Mapping
from?
last time you report:
A full lspci listing:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn-
LWO=16bit DwFcOutEn-
Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn+ ExtCTL- 64b-
Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE-
PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000
00: de 10 f0 02 06 00 b0 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 08 e0 e0 01 22 00 11 11 22 20 11 00
50: 23 06 7f 80 03 05 7f 80 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00
70: 44 44 41 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 1f 00 64 0c 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 61 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 10
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
00: de 10 fa 02 00 01 20 40 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 10 00 21 21 14 00 11 11 00 00 03 00 00 00
60: 21 88 13 02 de 8f e1 1f 08 72 4e 10 02 3f 00 20
70: 10 32 54 0a 10 00 00 00 a0 00 00 00 34 00 31 01
80: 00 00 00 00 00 00 00 00 00 00 50 3f 90 3f 00 00
90: 00 28 00 fe fd 00 00 00 fc ff ff ff ff 03 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 28 00 fe fd 01 01 a0 01 4f 00 00 80 f9 fd 00
e0: 00 00 c9 fe 00 00 00 00 00 fc ff ff 00 00 00 00
f0: 00 00 00 00 c7 02 32 00 00 00 00 00 00 00 00 00
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 fe 02 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 43 10 c0 81 1f 20 1c 20 1f 20 c0 21 00 00 00 00
50: 36 00 38 c9 01 00 00 00 3b 00 3d c9 02 1f 1c 80
60: 02 1f 1c 00 00 00 00 00 02 10 1c a0 02 0c 1c 90
70: 02 10 1c 90 02 14 1c 90 02 0c 1c 80 02 10 1c 80
80: 02 14 1c 80 02 18 1c 80 02 1c 1c 80 01 10 1c 80
90: 02 14 1c 80 11 00 11 00 32 01 00 00 00 00 00 00
a0: c2 00 40 01 10 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 41 23 05 08
c0: fd ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 f8 02 00 00 a0 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 00 00 00 00 02 10 1c 80 02 10 1c a0
50: 02 0c 1c 90 02 10 1c 90 02 14 1c 90 02 0c 1c 80
60: 02 10 1c 80 02 14 1c 80 02 18 1c 80 02 1c 1c 80
70: 01 10 1c 80 1f 20 c0 81 00 00 00 00 3e 30 40 c9
80: 01 00 00 00 44 30 46 c9 02 1f 1c 80 70 20 00 40
90: 89 da 01 09 00 00 00 00 11 00 10 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 08 00 00 00 18 1a 00 00 10 00 02 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0f 01 00 05 00 00 00 00
d0: 00 00 f0 03 00 04 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 60 ea 10 10 18 00 00 20 00 00 00 00 00 00 00 00
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00: de 10 f9 02 06 00 a0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: ef dd 7b 2f f7 de 7b 2f f7 de 7b 2f f7 02 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
70: 0a 00 00 00 03 00 00 00 25 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 05 00 00 00 04 00 00 00
90: 03 04 00 00 01 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: ff 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] #00 [00fe]
Capabilities: [fc] #00 [0000]
00: de 10 ff 02 06 00 b0 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 17 00 00 00 00 fe fe 00 00 fe fe 00 00 fe fe 00
50: 00 fe fe 00 00 fe fe 00 00 fe fe 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 7f 02 02 01 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 08 00 00 00 00 00 00 00 00 80 cb fe 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 7e 02 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 43 10 c0 81 11 00 00 00 75 07 00 00 11 00 00 00
50: 75 06 00 00 40 00 60 00 40 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04
b0: ff ff 03 00 10 11 00 00 ac 10 20 00 30 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: nvidia
Kernel modules: nvidia
00: de 10 40 02 07 00 b0 00 a2 00 00 03 00 00 00 00
10: 00 00 00 fc 0c 00 00 d0 00 00 00 00 04 00 00 fb
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
30: 00 00 00 00 48 00 00 00 00 00 00 00 05 01 00 00
40: 43 10 cd 81 00 00 00 00 01 50 02 00 00 00 00 00
50: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 00 00 04 00 00 00 00 00 00 00 01 00 00 00
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: 00 00 90 01 00 00 00 08 00 00 00 00 ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn-
LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 800MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz-
1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE-
PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000
00: de 10 70 02 06 00 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 08 e0 e9 01 22 20 00 00 d0 00 00 00
50: 23 05 7f 80 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 55 00
80: 23 55 55 00 fa 00 64 0c 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00: de 10 60 02 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 43 10 c0 81 00 f0 ff fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff c5 00 00 00 00 00 05 19 00 00 00 03
80: 09 80 00 2d 01 21 00 00 c0 00 00 01 00 00 00 00
90: 00 00 00 00 00 00 00 00 21 47 65 b7 ef cd 00 00
a0: 03 00 10 c1 00 00 00 00 00 00 00 00 00 00 00 00
b0: 90 02 ef 02 00 08 5f 08 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 64 02 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 4c 00 00 41 4c 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
40: 43 10 c0 81 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 40 00 00 01 44 00 00 01 48 00 00 00 00 00 00
70: 01 00 00 00 00 00 c8 fe 00 00 fe fe 01 20 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 01 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 10 10 04 00 00 a0 00 00 80 30 00 00 41 44 44 11
f0: 5a ff 5f bf 00 00 00 c0 10 00 00 00 00 00 00 00
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: de 10 72 02 00 04 a0 00 a3 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 10 00 00 10 00 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 02 03 00 00 12 00 00 00 02 00 00 00 10 01 12 00
70: 32 33 00 00 03 00 00 00 00 00 00 00 12 01 00 00
80: 10 00 00 00 00 00 00 00 00 00 00 00 30 02 00 00
90: 00 00 00 00 01 20 00 00 01 00 00 00 00 09 00 00
a0: 01 02 00 00 00 10 00 00 05 00 00 00 01 00 00 00
b0: 00 10 00 80 01 00 00 80 00 00 00 00 02 00 00 00
c0: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00: de 10 6d 02 07 00 b0 00 a3 10 03 0c 00 00 80 00
10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 03 01
40: 43 10 c0 81 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00: de 10 6e 02 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 02 03 01
40: 43 10 c0 81 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 0a 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 64 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00
b0: 00 11 22 33 00 00 00 00 ff 00 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Device f043:81c0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f400 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00: de 10 65 02 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f4 00 00 00 00 00 00 00 00 00 00 43 f0 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 43 f0 c0 81 01 00 02 00 00 00 00 00 00 00 00 00
50: 03 f0 01 00 00 00 00 00 99 99 99 20 2a 00 a8 20
60: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 90 20 21 00 00 02 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv
00: de 10 66 02 07 00 b0 00 a1 85 01 01 00 00 00 00
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
20: 01 e0 00 00 00 d0 02 fe 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 43 10 c0 81 01 b0 02 00 00 00 00 00 00 00 00 00
50: 07 00 00 00 00 00 00 00 a8 a8 a8 20 6a 00 99 20
60: 00 00 00 c0 51 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 00 50 36 22 00 00 08 80 9e f7 2d 3b
90: 00 00 58 1b 00 00 00 00 06 00 06 10 00 00 01 01
a0: 14 10 00 2a 00 00 00 00 00 00 00 00 33 33 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 00 e0
e0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 81c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv
00: de 10 67 02 07 00 b0 00 a1 85 01 01 00 00 00 00
10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00
20: 01 cc 00 00 00 c0 02 fe 00 00 00 00 43 10 c0 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 43 10 c0 81 01 b0 02 00 00 00 00 00 00 00 00 00
50: 07 00 00 00 00 00 00 00 a8 a8 a8 20 6a 00 99 20
60: 00 00 00 c0 51 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 db 46 60 f0 00 00 c6 2c ad 4c f4 fa
90: 00 00 15 20 00 00 00 00 06 00 06 10 00 00 01 01
a0: 14 10 00 00 00 00 00 00 00 00 00 00 33 33 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 01 00 02 6b 42 00 00 00 00 00 00 00 90 00 00 00
e0: 01 00 02 6b 42 00 00 00 00 00 00 00 0e 00 f0 07
f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128 I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000
00: de 10 6f 02 07 00 b0 00 a2 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 80 b0 b0 80 02
20: d0 fd d0 fd e0 fd e0 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 02
40: 00 00 03 00 01 00 02 00 07 00 00 00 00 00 44 00
50: 00 00 fe cf 00 00 00 00 ff 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 00 00 00 00
c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81cb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 24
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask+ 64bit+ Count=1/1 Enable+
Address: 00000000fee0300c Data: 4169
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel
00: de 10 6c 02 06 04 b0 00 a2 00 03 04 00 00 80 00
10: 00 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cb 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
40: 43 10 cb 81 01 50 02 c0 00 00 00 00 01 01 0f 00
50: 05 6c 81 01 0c 30 e0 fe 00 00 00 00 69 41 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 46 00 29 00 00 00 00 00 00
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 816a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Kernel driver in use: forcedeth
00: de 10 69 02 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 b0 02 fe 01 c8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 6a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
40: 43 10 6a 81 01 00 02 fe 00 01 00 00 0b 00 00 10
50: 05 6c 84 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn-
LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn-
LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 20 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 69 01 61 01 00 00 01 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00
90: 03 00 d0 00 00 ff df 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 00 f0 00 00 02 fe 00
b0: 03 00 e0 00 80 1f e0 00 00 00 00 00 00 00 00 00
c0: 13 b0 00 00 00 f0 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 02 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3d f8 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 05 00 00 00 00 00 00 00 24 f2 7d 0c 20 13 22 00
90: 10 0c 01 00 5b 80 10 77 24 00 00 80 20 25 2b 00
a0: ef 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: a4 1e 87 29 88 00 00 00 b4 35 61 00 ea bf 0f 1f
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 61 90 8c 27 00 14 48 00 48 ac 1a 0b 94 fe 81 99
e0: 7d 99 f5 b3 d9 3e 80 04 03 f2 93 16 fa b7 fb a5
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: 00 01 00 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 80 e4 a8 85 19 00 00 00 00 00 00 00 00 00 26 08
60: 4a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 32 51 21 40 70 50 00 2a 00 08 17 21 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 10 00 00 00 00 ac 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 30 35 22
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 c0 08 26 26 26 00
e0: 00 00 00 00 20 1a 52 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 b2 0f 04 00
01:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 4c 10 23 80 06 00 10 02 00 10 00 0c 08 20 00 00
10: 00 f0 df fd 00 80 df fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 8b 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 02 04
40: 00 00 00 00 01 00 02 7e 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 10 00 00 43 10 8b 80 00 00 01 01
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 55 lines · On Samstag 28 März 2009 21:52:45 Yinghai Lu wrote:
Quoted 54 lines · Prakash Punnoor
Quoted 46 lines · On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote:
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineQuoted 8 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into
quirks.cand it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI MappingQuoted 2 lines
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
I sprinkeld a few debugging messages around in the code and looking at that I don't see how the code can enable NMSI for device 00.0, but not for 09.0:
Quoted 7 lines
Quoted 3 lines
Both will exit here:
if (
host_bridge== dev &&host_bridge_with_leaf(host_bridge))where is
0000:00:03.0: Enabling HT MSI Mapping
from?
As I said this time there is a PCIe device more in my system (a realtek NIC):
I guess because of that this one appeared - or I have some different drivers loaded?
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00: de 10 fd 02 07 04 10 00 a1 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 a1 a1 00 20
20: c0 fd c0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 3c 11 01
90: 40 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The realtek nic:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at ac00 [size=256]
Region 2: Memory at fdcff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fdcc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Unknown small resource type 05
Unknown large resource type 6c
No end tag found
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Address: 00000000fee0300c Data: 4161
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-12-45
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
00: ec 10 68 81 07 04 10 00 01 00 00 02 10 00 00 00
10: 01 ac 00 00 00 00 00 00 04 f0 cf fd 00 00 00 00
20: 00 00 00 00 00 00 00 00 02 01 00 00 ec 10 68 81
30: 00 00 cc fd 40 00 00 00 00 00 00 00 05 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 05 df c2 f7
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 61 41 00 00
60: 10 84 01 00 23 7f 00 00 10 58 1a 00 41 f4 03 00
70: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 a2 10 0a 00 67 50 08 00 c3 01 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 178 lines · Prakash Punnoor
Quoted 55 lines · On Samstag 28 März 2009 21:52:45 Yinghai Lu wrote:
Quoted 54 lines · Prakash Punnoor
Quoted 46 lines · On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote:
Quoted 17 lines · On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote:
On Fri, 20 Mar 2009 19:29:41 -0700
Quoted 14 lines · Yinghai Lu
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root devv3: will enable c51...
v4: will enable c51 kind of without leaf too.
v5: update to mainlineQuoted 8 lines
Quoted 2 lines
Reported-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>Applied, thanks. Prakash if you get a chance can you try testing my linux-next branch (or just linux-next in general tomorrow) to make sure this is still ok for you?
Thanks,
Finally I am able to test the linux-next branch of pci tree after Jesse gave some help with git.(Is it correct that the kernel calls itself 2.6.28-rc8? I looked into
quirks.cand it seems to be correctly patched.) Unfortunately it doesn't seem to work for me (and I am wondering why as the old v4 version seemed to work ontop of one of the 2.6.29-rc versions):dmesg|grep HT
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI MappingQuoted 2 lines
Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my Intel HDA cannot use MSI.
I sprinkeld a few debugging messages around in the code and looking at that I don't see how the code can enable NMSI for device 00.0, but not for 09.0:
Quoted 7 lines
Quoted 3 lines
Both will exit here:
if (
host_bridge== dev &&host_bridge_with_leaf(host_bridge))where is
0000:00:03.0: Enabling HT MSI Mapping
from?As I said this time there is a PCIe device more in my system (a realtek NIC):
I guess because of that this one appeared - or I have some different drivers loaded?00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Address:00000000fee0300cData: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base:00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00: de 10 fd 02 07 04 10 00 a1 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 a1 a1 00 20
20: c0 fd c0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 3c 11 01
90: 40 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00The realtek nic:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at ac00 [size=256]
Region 2: Memory atfdcff000(64-bit, non-prefetchable) [size=4K]
Expansion ROM atfdcc0000[disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mAPME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Unknown small resource type 05
Unknown large resource type 6c
No end tag found
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Address:00000000fee0300cData: 4161
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-12-45
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
00: ec 10 68 81 07 04 10 00 01 00 00 02 10 00 00 00
10: 01 ac 00 00 00 00 00 00 04 f0 cf fd 00 00 00 00
20: 00 00 00 00 00 00 00 00 02 01 00 00 ec 10 68 81
30: 00 00 cc fd 40 00 00 00 00 00 00 00 05 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 05 df c2 f7
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 61 41 00 00
60: 10 84 01 00 23 7f 00 00 10 58 1a 00 41 f4 03 00
70: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
Quoted 9 lines
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11 90: 08 30 00 00 a2 10 0a 00 67 50 08 00 c3 01 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ok, when you plug in the card, BIOS will enable the pcie bridge...
need other way to figure out it is HT tunnel or HT end devices.
YH
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
In reply to Prakash Punnoorplease try follwing patch over pci/linux-next
Thanks
YH
[PATCH] pci: don't enable too much HT MSI mapping -v6
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev
v6: only do that trick with end_device on the chain.
drivers/pci/quirks.c +30 -2
@@ -2206,6 +2206,33 @@ static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)return found; } +#define PCI_HT_CAP_SLAVE_CTRL0 4/* link control */ +#define PCI_HT_CAP_SLAVE_CTRL1 8/* link control to */ + +static int __devinit is_end_of_ht_chain (struct pci_dev *dev) +{ +int pos, ctrl_off; +int end =0 ; +u16 flags, ctrl; + + pos =pci_find_ht_capability (dev,HT_CAPTYPE_SLAVE ); + +if (!pos) + goto out; + +pci_read_config_word (dev, pos +PCI_CAP_FLAGS , &flags); + + ctrl_off = ((flags >>10 ) &1 ) ? +PCI_HT_CAP_SLAVE_CTRL0 :PCI_HT_CAP_SLAVE_CTRL1 ; +pci_read_config_word (dev, pos + ctrl_off, &ctrl); + +if (ctrl & (1 <<6 )) + end =1 ; + +out: +return end; +} +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge;
@@ -2230,8 +2257,9 @@ static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)if (!found)return ; -/* don't enable host_bridge with leaf directly here */ -if (host_bridge == dev &&host_bridge_with_leaf (host_bridge)) +/* don't enable end_device/host_bridge with leaf directly here */ +if (host_bridge == dev &&is_end_of_ht_chain (host_bridge) && +host_bridge_with_leaf (host_bridge)) goto out;/* root did that ! */
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 7 lines · On Sonntag 29 März 2009 03:33:03 Yinghai Lu wrote:
please try follwing patch over pci/linux-next
Thanks
YH
[PATCH] pci: don't enable too much HT MSI mapping -v6
Works fine now, thanks!
pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping
So drop my patch and merge v6 of Yinghai Lu's one.
Cheers,
Prakash
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 11 lines · Prakash Punnoor
Quoted 7 lines · On Sonntag 29 März 2009 03:33:03 Yinghai Lu wrote:
please try follwing patch over pci/linux-next
Thanks
YH
[PATCH] pci: don't enable too much HT MSI mapping -v6
Works fine now, thanks!
Quoted 13 lines
pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping
can you put you pcie network card in the pcie slot belong to c51? we should find 00:03.0 the pcie bridge...
Thanks
YH
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 25 lines · On Sonntag 29 März 2009 11:32:56 Yinghai Lu wrote:
Quoted 11 lines · Prakash Punnoor
Quoted 7 lines · On Sonntag 29 März 2009 03:33:03 Yinghai Lu wrote:
please try follwing patch over pci/linux-next
Thanks
YH
[PATCH] pci: don't enable too much HT MSI mapping -v6
Works fine now, thanks!
Quoted 12 lines
pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping
Quoted 3 lines
can you put you pcie network card in the pcie slot belong to c51? we should find 00:03.0 the pcie bridge...
Above is when inserted in PCIe 1x slot, now in my PCIe 16x slot (I don't have other options):
pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00: de 10 fb 02 07 04 10 00 a1 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 a1 a1 00 20
20: c0 fd c0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 01 3d 11 00
90: 40 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Re: [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend
Quoted 97 lines · Prakash Punnoor
Quoted 23 lines · On Sonntag 29 März 2009 11:32:56 Yinghai Lu wrote:
Quoted 10 lines · Prakash Punnoor
Quoted 7 lines · On Sonntag 29 März 2009 03:33:03 Yinghai Lu wrote:
please try follwing patch over pci/linux-next
Thanks
YH
[PATCH] pci: don't enable too much HT MSI mapping -v6
Works fine now, thanks!
Quoted 12 lines
pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI MappingQuoted 3 lines
can you put you pcie network card in the pcie slot belong to c51? we should find 00:03.0 the pcie bridge...
Above is when inserted in PCIe 1x slot, now in my PCIe 16x slot (I don't have other options):
pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:09.0: Found disabled HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Address:00000000fee0300cData: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base:00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00: de 10 fb 02 07 04 10 00 a1 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 a1 a1 00 20
20: c0 fd c0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Quoted 10 lines
80: 10 00 41 01 c0 04 00 00 10 28 00 00 01 3d 11 00 90: 40 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ok, looks good.
Jesse, please apply the -v6, in addition to -v5.
YH
PATCH 1/1 pci: don't enable too much HT MSI mapping -v6
In reply to Prakash PunnoorImpact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the nv_msi_ht_cap_quirk()
and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev
v6: only do that trick with end_device on the chain.
drivers/pci/quirks.c +30 -2
@@ -2206,6 +2206,33 @@ static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)return found; } +#define PCI_HT_CAP_SLAVE_CTRL0 4/* link control */ +#define PCI_HT_CAP_SLAVE_CTRL1 8/* link control to */ + +static int __devinit is_end_of_ht_chain (struct pci_dev *dev) +{ +int pos, ctrl_off; +int end =0 ; +u16 flags, ctrl; + + pos =pci_find_ht_capability (dev,HT_CAPTYPE_SLAVE ); + +if (!pos) + goto out; + +pci_read_config_word (dev, pos +PCI_CAP_FLAGS , &flags); + + ctrl_off = ((flags >>10 ) &1 ) ? +PCI_HT_CAP_SLAVE_CTRL0 :PCI_HT_CAP_SLAVE_CTRL1 ; +pci_read_config_word (dev, pos + ctrl_off, &ctrl); + +if (ctrl & (1 <<6 )) + end =1 ; + +out: +return end; +} +static void __devinit nv_ht_enable_msi_mapping (struct pci_dev *dev) {struct pci_dev *host_bridge;
@@ -2230,8 +2257,9 @@ static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)if (!found)return ; -/* don't enable host_bridge with leaf directly here */ -if (host_bridge == dev &&host_bridge_with_leaf (host_bridge)) +/* don't enable end_device/host_bridge with leaf directly here */ +if (host_bridge == dev &&is_end_of_ht_chain (host_bridge) && +host_bridge_with_leaf (host_bridge)) goto out;/* root did that ! */
Re: [PATCH] pci: don't enable too much HT MSI mapping -v6
Quoted 10 lines · On Sun, 29 Mar 2009 12:30:05 -0700 Yinghai Lu <[email protected]> wrote:
Impact: fix bug
Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card.
this patch rework the
nv_msi_ht_cap_quirk()
and will only try to avoid to enableht_msion device following that root dev, and don't touch that root dev
Quoted 5 lines
v6: only do that trick with
end_deviceon the chain.Reported-by Prakash Punnoor <[email protected]>Tested-by Prakash Punnoor <[email protected]>Signed-off-by Yinghai Lu <[email protected]>
Applied, thanks for testing & fixing the fix!
Thanks,
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Re: [PATCH] pci: enable MSI on 8132
In reply to Eric W. Biedermandrivers/pci/quirks.c static void __devinit ht_enable_msi_mapping(struct pci_dev *dev) · line 2028
Quoted 2 lines · Eric W. Biederman
drivers/pci/quirks.c +2
-0+pci_write_config_dword (dev, pos +HT_MSI_ADDR_LO , + (HT_MSI_FIXED_ADDR &HT_MSI_FIXED_ADDR ));
Presumably you meant "(HT_MSI_FIXED_ADDR & 0xffffffff)" here? Not that it makes any difference, since it'll be implicitly truncated.
Quoted 3 lines
drivers/pci/quirks.c +3
-0+pci_write_config_dword (dev, pos +HT_MSI_ADDR_HI , + (HT_MSI_FIXED_ADDR >>32 )); + }
Signature · 4 lines
Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."
Re: [PATCH] pci: enable MSI on 8132
In reply to Eric W. BiedermanOn Sat, Feb 21, 2009 at 12:58:31AM -0800, Eric W. Biederman wrote:
...
Quoted 2 lines
The difference is that there is a magic address on x86 that all MSI cycles are sent to. I think it is
0xfffe0000.
arch/x86/include/asm/msidef.h:#define MSI_ADDR_BASE_LO 0xfee00000
Intel spells out the details in:
http://www.intel.com/products/processor/manuals/index.htm
"Volume 3A: System Programming Guide, Part 1"
See chapter "9.4 LOCAL APIC"
Quoted 3 lines
In an msi to HT
mapping capability it is necessary to program in the address to listen for msi packets. That is very much an arch dependent thing.
Indeed. parisc and (AFAIK) alpha have the same ability but use completely different address ranges depending on the chipset as well.
thanks,
grant
Quoted 10 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 6 lines · On Tue, 17 Feb 2009, [email protected] wrote:
Quoted 4 lines
do you have chance to try current tip/master
http://people.redhat.com/mingo/tip.git/readme.txt
or 2.6.29-rcX
plus following patch?I will see about trying this.
does the fact that I am compiling a monolithic kernel (no modules) make any difference related to the patch below?
this patch on the (current as a few min ago) linus git tree doesn't work, trying adding the other patch now.
David Lang
Quoted 49 lines
David Lang
Quoted 27 lines
Quoted 1 line
or can you check if there is update fw for your LSI card?
this is more work, I'll look into that as well.
David Lang
Quoted 21 lines
[PATCH] mpt: fix enable lsi sas to use msi as default
Impact: fix bug
the third param in
module_param(,,)is perm instead of default value. we still need to assign default at first.Signed-off-by Yinghai Lu <[email protected]>---
drivers/message/fusion/mptbase.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux-2.6/drivers/message/fusion/mptbase.c
===================================================================drivers/message/fusion/mptbase.c +0
-0@@ -90,8 +90,8 @@ module_param(mpt_msi_enable_fc, int, 0);MODULE_PARM_DESC (mpt_msi_enable_fc," Enable MSI Support for FC \ controllers (default=0)" );Quoted 14 lines
drivers/message/fusion/mptbase.c module_param(mpt_msi_enable_fc, int, 0); · line 97
Quoted 8 lines
drivers/message/fusion/mptbase.c +2
-2-static int mpt_msi_enable_sas; -module_param (mpt_msi_enable_sas, int,1 ); +static int mpt_msi_enable_sas =1 ; +module_param (mpt_msi_enable_sas, int,0 );MODULE_PARM_DESC (mpt_msi_enable_sas," Enable MSI Support for SAS \ controllers (default=1)" );--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/