Hiding Local Topology – TTL
Hello BM friends and developers,
Concerning „B.A.T.M.A.N Status Report“ from June 28, 2007:
•„2.1.7 Hiding Local Topology Information Beyond the Neighborhood“
How do I exactly set the TTL-Value for one or more of the specified interfaces?
Thank You,
Best Regards
Peter
Hello again,
Am Dienstag, 3. März 2009 schrieb P. Mazart:
Quoted 2 lines
How do I exactly set the TTL-Value for one or more of the specified interfaces?
How about the vis-server? Does it need a route back to the Source? (i.e. an „invisible“ back-bone-node)
How often does BM send its status to the vis server?
Best Regards
P.M.
Quoted 2 lines · On Thursday 05 March 2009 18:55:16 P. Mazart wrote:
Quoted 2 lines
How do I exactly set the TTL-Value for one or more of the specified interfaces?
This paper just mentions the possibilities - not all flavors implement that feature. As far as I know bmx (batman-experimental) supports it though.
Quoted 2 lines
How about the vis-server? Does it need a route back to the Source? (i.e. an „invisible“ back-bone-node)
A route back to the source? The packets sent to the vis server are UDP packets which require no ACK.
Quoted 1 line
How often does BM send its status to the vis server?
The interval depends on the implementation - tcpdump can help you to check your daemon. :-)
Regards,
Marek
Hello & Thank's for your reply,
Am Donnerstag, 5. März 2009 schrieb Marek Lindner:
Quoted 3 lines
This paper just mentions the possibilities - not all flavors implement that feature. As far as I know bmx (batman-experimental) supports it though.
Now I'm completely stuck with BM's brands. :-)
Can you say something about overhead and performance of BM in kernelspace compared to the udp-userspace deamon? And devel-status of each of them?
Quoted 1 line
[…] The packets sent to the vis server are UDP packets […]
Ahh. Great. Thank's for the information.
Greetings,
P.M.
Arrgh,
Am Donnerstag, 5. März 2009 schrieb P. Mazart:
Quoted 2 lines
Hello & Thank's for your reply, […]
Ahh. Great. Thank's for the information.
„Thank's“ – Shouldn't have done this…
Re: [B.A.T.M.A.N.] Hiding Local Topology ??? TTL
In reply to P. MazartQuoted 6 lines · P. Mazart
Am Donnerstag, 5. März 2009 schrieb Marek Lindner:
Quoted 3 lines
This paper just mentions the possibilities - not all flavors implement that feature. As far as I know bmx (batman-experimental) supports it though.
Now I'm completely stuck with BM's brands. :-)
Please read http://open-mesh.net/wiki/BranchesExplained to understand basic differences between the "brands". B.A.T.M.A.N.-adv has completely different ideas about what to route. It is not meant as drop-in replacement and not for any performance reasons.
Quoted 3 lines
Can you say something about overhead and performance of BM in kernelspace compared to the udp-userspace deamon? And devel-status of each of them?
You can only compare batman-adv-kernelland and batman-adv-userspace performance wise. Userspace has some performance problems and was meant to test the concept of routing ethernet frames instead of creating routing tables for ip routing.
B.A.T.M.A.N. (aka batmand) has no kernel space implementation, but a supporting kernel module for it's gateway functionality. It should help the gateway node to reduce the performance bottle neck by not copying all data from kernelland to userspace.
If you would really compare batman-adv-kernelland and batmand then please ask again - I don't have any good numbers here, but maybe somebody else has.
If you really want to test batman-adv-kernelland then please use the last stable release from
http://downloads.open-mesh.net/batman/stable/sources/batman-adv-kernelland/
and not the current version from svn. New experimental features were added there recently and it is not in a stabilising phase at the moment.
Quoted 3 lines
Quoted 1 line
[…] The packets sent to the vis server are UDP packets […]
Ahh. Great. Thank's for the information.
If you want to check the amount of time between two vis packets:
http://open-mesh.net/browser/trunk/batman/batman.c?annotate=blame&rev=1235#L1232
It is around 10000ms at the moment in batmand, but as Marek said it depends on the implementation.
Best regards,
Sven
Re: [B.A.T.M.A.N.] Hiding Local Topology ??? TTL
Hello again,
Am Donnerstag, 5. März 2009 schrieb Sven Eckelmann:
Quoted 2 lines
Please read http://open-mesh.net/wiki/BranchesExplained to understand basic differences between the "brands".
Ok did it.
Obviously "batman" stands for an algorithm on one hand and implementation on the other hand…
Can you say why there are different userspace-implementations and what their difference is? („Experimental is not Debian“ is what I know, yet.)
Quoted 3 lines
If you would really compare batman-adv-kernelland and batmand then please ask again - I don't have any good numbers here, but maybe somebody else has.
Yes, I thought there might be differences due to the translation (e.g.) to sockets inside the kernel when using batmand or something.
But as far as got to know now the originatorpacketsize of batmand (≈60bytes) is small compared to the sizes of olsr's anyway. (≈500bytes with 300 nodes(?))
Thanks for your help
P.M.
Re: [B.A.T.M.A.N.] Hiding Local Topology ??? TTL
Quoted 9 lines · On Wednesday 11 March 2009 14:20:49 P. Mazart wrote:
Hello again,
Am Donnerstag, 5. März 2009 schrieb Sven Eckelmann:
Quoted 2 lines
Please read http://open-mesh.net/wiki/BranchesExplained to understand basic differences between the "brands".
Ok did it.
Obviously "batman" stands for an algorithm on one hand and implementation on the other hand…
Correct
Quoted 1 line
Can you say why there are different userspace-implementations
bmx is more or less an fork of batmand where Axel Neumann does some of his work and tried his ideas.
Quoted 2 lines
and what
their difference is? („Experimental is not Debian“ is what I know, yet.)
There is a document written by Axel to describe what he tries to do or did. I don't if it is up to date, but it is currently the best hint I can give you:
http://downloads.open-mesh.net/batman/misc/bmx.pdf
Best regards,
Sven
Re: [B.A.T.M.A.N.] Hiding Local Topology ??? TTL
Am Mittwoch, 11. März 2009 schrieb Sven Eckelmann:
Quoted 4 lines
There is a document written by Axel to describe what he tries to do or did. I don't if it is up to date, but it is currently the best hint I can give you:
http://downloads.open-mesh.net/batman/misc/bmx.pdf
Very Cool,
I'll read soon.
Thanks
P.M.