Skip to contentSkip to conversation

TT 3650

DISCUSSION Andreas Kurz 7 participants 18 messages Feb 18, 2009 – Mar 22, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Few days ago I was asking for help: I have bought the TT 3650 CI but even after installing the drivers (as suggested in the WIKI-How-To) no card shows up in Yast. Does that mean, the card is not supported?
Should I do something else? Is there another How-To around?

Thank you!

Signature · 1 line
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01
#1 lore raw
Quoted 4 lines · On Wed, 18 Feb 2009 10:22:17 +0100 "Andreas Kurz" <[email protected]> wrote:

Few days ago I was asking for help: I have bought the TT 3650 CI but even after installing the drivers (as suggested in the WIKI-How-To) no card shows up in Yast. Does that mean, the card is not supported? Should I do something else? Is there another How-To around?

Hello Andreas,

I have such a USB device. It works fine without any patch with the last version of Igor M. Liplianin's repository:

http://mercurial.intuxication.org/hg/s2-liplianin/

Regards.

Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
#2 lore raw

Thats the Problem, you only can get the driver for your card from another repo, but not the main one.
After the first rusch pusching s2api out, no one is intrested anymore to get more s2 cards working in the mainline development tree.

Quoted 27 lines
Quoted 4 lines · On Wed, 18 Feb 2009 10:22:17 +0100 "Andreas Kurz" <[email protected]> wrote:

Few days ago I was asking for help: I have bought the TT 3650 CI but even after installing the drivers (as suggested in the WIKI-How-To) no card shows up in Yast. Does that mean, the card is not supported? Should I do something else? Is there another How-To around?

Hello Andreas,

I have such a USB device. It works fine without any patch with the last version of Igor M. Liplianin's repository:

http://mercurial.intuxication.org/hg/s2-liplianin/

Regards.

--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw

Hi,

Quoted 4 lines · gimli

Thats the Problem, you only can get the driver for your card from another repo, but not the main one.
After the first rusch pusching s2api out, no one is intrested anymore to get more s2 cards working in the mainline development tree.

FULLACK.
What's the problem to merge these drivers into mainline repo? It's not easy for new users to find the drivers.
it will be more userfriendly to have them in main linux kernel!!!

BR.
Halim

#4 lore raw
In reply to Jean-Francois Moine

Le 18.02.2009 05:33:53, Jean-Francois Moine a écrit :

Quoted 10 lines
Quoted 1 line · On Wed, 18 Feb 2009 10:22:17 +0100 "Andreas Kurz" <[email protected]> wrote:

Few days ago I was asking for help: I have bought the TT 3650 CI

but

Quoted 2 lines

even after installing the drivers (as suggested in the WIKI-How-To) no card shows up in Yast. Does that mean, the card is not

supported?

Quoted 1 line

Should I do something else? Is there another How-To around?

Quoted 7 lines

Hello Andreas,

I have such a USB device. It works fine without any patch with the last
version of Igor M. Liplianin's repository:

http://mercurial.intuxication.org/hg/s2-liplianin/

Hmm do you mean that you can lock any DVB-S2 transponder with it? Thx
Bye
Emmanuel

#5 lore raw
Quoted 7 lines · On Wed, 18 Feb 2009 08:48:37 -0400 Manu <[email protected]> wrote:
Quoted 5 lines

I have such a USB device. It works fine without any patch with the last
version of Igor M. Liplianin's repository:

http://mercurial.intuxication.org/hg/s2-liplianin/

Hmm do you mean that you can lock any DVB-S2 transponder with it?

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec - QPSK), but not the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
#6 lore raw

Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit :

Quoted 14 lines
Quoted 1 line · On Wed, 18 Feb 2009 08:48:37 -0400 Manu <[email protected]> wrote:
Quoted 1 line

I have such a USB device. It works fine without any patch with

the

Quoted 6 lines
Quoted 4 lines

last
version of Igor M. Liplianin's repository:

http://mercurial.intuxication.org/hg/s2-liplianin/

Hmm do you mean that you can lock any DVB-S2 transponder with it?

Yes. I use it to look at FTA channels on AB3 5°W:

Quoted 8 lines

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec - QPSK), but not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC for all these transponders.
Thx a lot,
Emmanuel

#7 lore raw
Quoted 9 lines · On Wed, 18 Feb 2009 19:30:37 -0400 Manu <[email protected]> wrote:

Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit :

Quoted 8 lines

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec - QPSK), but not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

Quoted 5 lines
Quoted 2 lines

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC for all these transponders.

I don't understand the question!

I think the symbol rate is mandatory, but the FEC may found automatically. For example, I use vlc for the 2 different transponders:

#EXTINF:0,orange
#EXTVLCOPT:dvb-frequency=11512000
#EXTVLCOPT:dvb-srate=29947000
#EXTVLCOPT:dvb-voltage=13
dvb://
#EXTINF:0,france
#EXTVLCOPT:dvb-frequency=11590000
#EXTVLCOPT:dvb-srate=20000000
#EXTVLCOPT:dvb-voltage=13
dvb://

The first transponder is FEC 7/8, and the second 2/3.

For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + dvbstream.

Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
#8 lore raw

Le 19.02.2009 04:51:09, Jean-Francois Moine a écrit :

Quoted 36 lines
Quoted 6 lines · On Wed, 18 Feb 2009 19:30:37 -0400 Manu <[email protected]> wrote:

Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit :

Quoted 5 lines

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec - QPSK),

but

Quoted 8 lines
Quoted 5 lines

not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC for all these transponders.

I don't understand the question!

I think the symbol rate is mandatory, but the FEC may found automatically. For example, I use vlc for the 2 different transponders:

#EXTINF:0,orange
#EXTVLCOPT:dvb-frequency=11512000
#EXTVLCOPT:dvb-srate=29947000
#EXTVLCOPT:dvb-voltage=13
dvb://
#EXTINF:0,france
#EXTVLCOPT:dvb-frequency=11590000
#EXTVLCOPT:dvb-srate=20000000
#EXTVLCOPT:dvb-voltage=13
dvb://

Quoted 4 lines

The first transponder is FEC 7/8, and the second 2/3.

For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + dvbstream.

OK great thx, that's what I was asking for! Indeed I have some troubles locking on S2 transponders which all have 30 MS/s rate. I see that yours are lower, well with one very close to that.
Bye
Emmanuel

#9 lore raw
Quoted 39 lines · Manu
Quoted 38 lines · Jean-Francois Moine
Quoted 6 lines · On Wed, 18 Feb 2009 19:30:37 -0400 Manu <[email protected]> wrote:
Quoted 5 lines · Jean-Francois Moine

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec - QPSK),

but

Quoted 8 lines
Quoted 5 lines

not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC for all these transponders.

I don't understand the question!

I think the symbol rate is mandatory, but the FEC may found automatically. For example, I use vlc for the 2 different transponders:

#EXTINF:0,orange
#EXTVLCOPT:dvb-frequency=11512000
#EXTVLCOPT:dvb-srate=29947000
#EXTVLCOPT:dvb-voltage=13
dvb://
#EXTINF:0,france
#EXTVLCOPT:dvb-frequency=11590000
#EXTVLCOPT:dvb-srate=20000000
#EXTVLCOPT:dvb-voltage=13
dvb://

The first transponder is FEC 7/8, and the second 2/3.

Quoted 8 lines
Quoted 2 lines

For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + dvbstream.

OK great thx, that's what I was asking for! Indeed I have some troubles locking on S2 transponders which all have 30 MS/s rate. I see that yours are lower, well with one very close to that.
Bye
Emmanuel

Hi Manu!

I use to own this card until it broke and replaced with TeVii S650. It used to lock just fine on this Transponders. Although i can't receive from this satellite
anymore my dish has been realigned to 16E instead.

Thor 1W
12015 H 30000-3/4
12130 H 30000-3/4

Faruk

#10 lore raw

Le 19.02.2009 10:40:42, Faruk A a écrit :

Quoted 54 lines · Manu
Quoted 10 lines · Jean-Francois Moine
Quoted 9 lines
Quoted 6 lines · On Wed, 18 Feb 2009 19:30:37 -0400 Manu <[email protected]> wrote:
Quoted 5 lines · Jean-Francois Moine

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec -

QPSK),

Quoted 8 lines
Quoted 8 lines

but

Quoted 7 lines
Quoted 5 lines

not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC

for

Quoted 19 lines
Quoted 19 lines
Quoted 1 line

all these transponders.

I don't understand the question!

I think the symbol rate is mandatory, but the FEC may found automatically. For example, I use vlc for the 2 different transponders:

#EXTINF:0,orange
#EXTVLCOPT:dvb-frequency=11512000
#EXTVLCOPT:dvb-srate=29947000
#EXTVLCOPT:dvb-voltage=13
dvb://
#EXTINF:0,france
#EXTVLCOPT:dvb-frequency=11590000
#EXTVLCOPT:dvb-srate=20000000
#EXTVLCOPT:dvb-voltage=13
dvb://

Quoted 6 lines
Quoted 4 lines

The first transponder is FEC 7/8, and the second 2/3.

For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + dvbstream.

OK great thx, that's what I was asking for! Indeed I have some

troubles

Quoted 4 lines

locking on S2 transponders which all have 30 MS/s rate. I see that yours are lower, well with one very close to that.
Bye
Emmanuel

Hi Manu!

Quoted 8 lines

I use to own this card until it broke and replaced with TeVii S650. It used to lock just fine on this Transponders. Although i can't receive from this satellite
anymore my dish has been realigned to 16E instead.

Thor 1W
12015 H 30000-3/4
12130 H 30000-3/4

OK, thx!
Bye
Emmanuel

#11 lore raw
In reply to Faruk A

Le 19.02.2009 10:40:42, Faruk A a écrit :

Quoted 59 lines · Manu
Quoted 10 lines · Jean-Francois Moine
Quoted 9 lines
Quoted 6 lines · On Wed, 18 Feb 2009 19:30:37 -0400 Manu <[email protected]> wrote:
Quoted 5 lines · Jean-Francois Moine

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec -

QPSK),

Quoted 8 lines
Quoted 8 lines

but

Quoted 7 lines
Quoted 5 lines

not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC

for

Quoted 19 lines
Quoted 19 lines
Quoted 1 line

all these transponders.

I don't understand the question!

I think the symbol rate is mandatory, but the FEC may found automatically. For example, I use vlc for the 2 different transponders:

#EXTINF:0,orange
#EXTVLCOPT:dvb-frequency=11512000
#EXTVLCOPT:dvb-srate=29947000
#EXTVLCOPT:dvb-voltage=13
dvb://
#EXTINF:0,france
#EXTVLCOPT:dvb-frequency=11590000
#EXTVLCOPT:dvb-srate=20000000
#EXTVLCOPT:dvb-voltage=13
dvb://

Quoted 6 lines
Quoted 4 lines

The first transponder is FEC 7/8, and the second 2/3.

For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + dvbstream.

OK great thx, that's what I was asking for! Indeed I have some

troubles

Quoted 4 lines

locking on S2 transponders which all have 30 MS/s rate. I see that yours are lower, well with one very close to that.
Bye
Emmanuel

Hi Manu!

I use to own this card until it broke and replaced with TeVii S650. It used to lock just fine on this Transponders. Although i can't receive from this satellite
anymore my dish has been realigned to 16E instead.

Quoted 6 lines

Thor 1W
12015 H 30000-3/4
12130 H 30000-3/4

Faruk

Thx, can you tell me with which driver (repo and date if possible). Thx
Bye
Emmanuel

#12 lore raw
Quoted 64 lines · Manu
Quoted 63 lines · Faruk A
Quoted 10 lines · Manu
Quoted 9 lines · Jean-Francois Moine
Quoted 6 lines · On Wed, 18 Feb 2009 19:30:37 -0400 Manu <[email protected]> wrote:
Quoted 5 lines · Jean-Francois Moine

Yes. I use it to look at FTA channels on AB3 5°W:

- France 24 (12674.00 H - DVB-S2 - QPSK) is good.

- I can also get the transponder 11636.00 V (DVB Newtec -

QPSK),

Quoted 8 lines
Quoted 8 lines

but

Quoted 7 lines
Quoted 5 lines

not
the transponder 11139.00 V (DVB Newtec - 8PSK turbo)

- For some time, there were clear channels (M6 and W9) in the transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.

Just to make things clear, can you prodvide symbol rate and FEC

for

Quoted 19 lines
Quoted 19 lines
Quoted 1 line

all these transponders.

I don't understand the question!

I think the symbol rate is mandatory, but the FEC may found automatically. For example, I use vlc for the 2 different transponders:

#EXTINF:0,orange
#EXTVLCOPT:dvb-frequency=11512000
#EXTVLCOPT:dvb-srate=29947000
#EXTVLCOPT:dvb-voltage=13
dvb://
#EXTINF:0,france
#EXTVLCOPT:dvb-frequency=11590000
#EXTVLCOPT:dvb-srate=20000000
#EXTVLCOPT:dvb-voltage=13
dvb://

Quoted 6 lines
Quoted 4 lines

The first transponder is FEC 7/8, and the second 2/3.

For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + dvbstream.

OK great thx, that's what I was asking for! Indeed I have some

troubles

Quoted 4 lines

locking on S2 transponders which all have 30 MS/s rate. I see that yours are lower, well with one very close to that.
Bye
Emmanuel

Hi Manu!

I use to own this card until it broke and replaced with TeVii S650. It used to lock just fine on this Transponders. Although i can't receive from this satellite
anymore my dish has been realigned to 16E instead.

Thor 1W
12015 H 30000-3/4
12130 H 30000-3/4

Quoted 8 lines
Quoted 2 lines

Faruk

Thx, can you tell me with which driver (repo and date if possible). Thx
Bye
Emmanuel

With multiproto repo: http://jusst.de/hg/multiproto and the pctv452e.patch since that card was not support in any repo. I'm not 100% sure but i think i tried it with S2API too, the last time i tried this card with S2API, Dominik's (creator of the driver) patch was more stable than the one in s2-liplianin which did'nt include all parts of the Dominik's patch i think because the patch changes stb0899 code.
Here is the Dominik's original patch
http://hem.passagen.se/faruks/3650/my_s2api_pctv452e.txt
the patch changes couple of files compare it with the one on
http://mercurial.intuxication.org/hg/s2-liplianin or
http://linuxtv.org/hg/v4l-dvb

Faruk

#13 lore raw
In reply to Jean-Francois Moine

Hi again!

Concerning this card (TT 3650 CI) in combination with the non-repo-driver (suggested below): which tuner should I use? Is there a special one needed?

-------- Original-Nachricht --------

Quoted 26 lines

Datum: Wed, 18 Feb 2009 10:33:53 +0100
Von: Jean-Francois Moine <[email protected]>
An: "Andreas Kurz" <[email protected]>
CC: [email protected]
Betreff: Re: TT 3650

Quoted 4 lines · On Wed, 18 Feb 2009 10:22:17 +0100 "Andreas Kurz" <[email protected]> wrote:

Few days ago I was asking for help: I have bought the TT 3650 CI but even after installing the drivers (as suggested in the WIKI-How-To) no card shows up in Yast. Does that mean, the card is not supported? Should I do something else? Is there another How-To around?

Hello Andreas,

I have such a USB device. It works fine without any patch with the last version of Igor M. Liplianin's repository:

http://mercurial.intuxication.org/hg/s2-liplianin/

Regards.

Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
Signature · 1 line
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01
#14 lore raw
Quoted 3 lines · On Mon, 23 Feb 2009 12:34:39 +0100 "Andreas Kurz" <[email protected]> wrote:

Concerning this card (TT 3650 CI) in combination with the non-repo-driver (suggested below): which tuner should I use? Is there a special one needed?

Hi Andreas,

By tuner, do you mean the program to watch TV?

I use 'vlc' with a playing list for DVB-S. For DVB-S2, I must use 'szap-s2' to select the transponder and 'dvbstream' + 'vlc':

	dvbstream -o 8192 | vlc -
Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
#15 lore raw

Hi...

Still having some problems getting this card to work for me (Suse 11.1, KDE 4.1).
I have successfully installed the suggested non-main-repo, szap-s2 and dvbstream.
Unter Yast/TV-card I used the Experts button to tell the system to use a unknown tv-card with v4l2. Unfotunately dvbstream -o 8192 | vlc leaves me with

scyth@NotebookMMC:~> dvbstream -o 8192 | vlc
VLC media player 0.9.8a Grishenko
[00000001] main libvlc debug: VLC media player - version 0.9.8a Grishenko - (c) 1996-2008 the VideoLAN team
[00000001] main libvlc debug: libvlc was configured with ./configure '--host=i686-suse-linux-gnu' '--build=i686-suse-linux-gnu' '--target=i586-suse-linux' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--enable-gnomevfs' '--enable-ncurses' '--enable-wxwidgets' '--disable-pda' '--disable-macosx' '--disable-qnx' '--enable-xosd' '--enable-gnutls' '--enable-visual' '--disable-goom' '--enable-slp' '--enable-lirc' '--disable-joystick' '--disable-corba' '--enable-dvdread' '--enable-dvdnav' '--disable-dshow' '--enable-v4l' '--enable-v4l2' '--enable-pvr' '--enable-vcd' '--enable-satellite' '--enable-ogg' '--enable-mkv' '--enable-mod' '--enable-libcdio' '--enable-vcdx' '--enable-cddax' '--enable-libcddb' '--enable-x11' '--enable-xvideo' '--enable-glx' '--enable-fb' '--enable-mga' '--enable-freetype' '--enable-fribidi' '--disable-svg' '--disable-directx' '--disable-wingdi' '--disable-glide' '--enable-aa' '--enable-caca' '--enable-oss' '--disable-esd' '--enable-arts' '--enable-waveout' '--disable-coreaudio' '--disable-hd1000a' '--disable-hd1000v' '--enable-mad' '--enable-ffmpeg' '--enable-faad' '--enable-a52' '--enable-dca' '--enable-flac' '--enable-libmpeg2' '--enable-vorbis' '--enable-tremor' '--enable-speex' '--disable-tarkin' '--enable-theora' '--enable-cmml' '--enable-utf8' '--enable-pth' '--disable-st' '--disable-gprof' '--disable-cprof' '--disable-testsuite' '--enable-optimizations' '--disable-altivec' '--disable-debug' '--enable-release' '--enable-sout' '--with-ffmpeg-faac' '--disable-galaktos' '--enable-httpd' '--enable-jack' '--enable-mozilla' '--enable-alsa' '--enable-real' '--enable-realrtsp' '--enable-live555' '--with-live555-tree=/usr/lib/live' '--enable-fast-install' '--enable-dvbpsi' '--enable-dvb' '--enable-lua' '--enable-pulse' '--enable-asademux' '--enable-libproxy' '--enable-libass' '--enable-kate' '--enable-smb' '--enable-taglib' 'build_alias=i686-suse-linux-gnu' 'host_alias=i686-suse-linux-gnu' 'target_alias=i586-suse-linux' 'CFLAGS=-march=i586 -mtune=i686 -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' 'CXXFLAGS=-march=i586 -mtune=i686 -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [00000001] main libvlc debug: translation test: code is "de"
dvbstream v0.6 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
dvbstream will stop after -1 seconds (71582788 minutes)
FD 0: DEMUX DEVICE: : No such file or directory
[00000001] main libvlc: vlc wird mit dem Standard-Interface ausgeführt. Benutzen Sie 'cvlc', um vlc ohne Interface zu verwenden.

With the most important part:

FD 0: DEMUX DEVICE: : No such file or directory

lsusb gives me:
Bus 004 Device 003: ID 0b48:300d TechnoTrend AG TT-connect CT-3650 CI

lsmod
v4l1_compat 12380 1 videodev

dmesg | grep v4l
uvcvideo: disagrees about version of symbol v4l_compat_translate_ioctl
uvcvideo: Unknown symbol v4l_compat_translate_ioctl

Thank you in advance...

Andy

-------- Original-Nachricht --------

Quoted 24 lines

Datum: Mon, 23 Feb 2009 13:19:09 +0100
Von: Jean-Francois Moine <[email protected]>
An: "Andreas Kurz" <[email protected]>
CC: [email protected]
Betreff: Re: TT 3650

Quoted 3 lines · On Mon, 23 Feb 2009 12:34:39 +0100 "Andreas Kurz" <[email protected]> wrote:

Concerning this card (TT 3650 CI) in combination with the non-repo-driver (suggested below): which tuner should I use? Is there a special one needed?

Hi Andreas,

By tuner, do you mean the program to watch TV?

I use 'vlc' with a playing list for DVB-S. For DVB-S2, I must use 'szap-s2' to select the transponder and 'dvbstream' + 'vlc':

	dvbstream -o 8192 | vlc -
Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
Signature · 6 lines
Computer Bild Tarifsieger! GMX FreeDSL - Telefonanschluss + DSL
für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a

-- 
Computer Bild Tarifsieger! GMX FreeDSL - Telefonanschluss + DSL
für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
#16 lore raw
Quoted 1 line · On Sun, 08 Mar 2009 16:27:02 +0100 "Andreas Kurz" <[email protected]> wrote:

Hi...

Hi Andreas,

Quoted 7 lines

Still having some problems getting this card to work for me (Suse 11.1, KDE 4.1). I have successfully installed the suggested non-main-repo, szap-s2 and dvbstream. Unter Yast/TV-card I used the Experts button to tell the system to use a unknown tv-card with v4l2. Unfotunately dvbstream -o 8192 | vlc leaves me with

scyth@NotebookMMC:~> dvbstream -o 8192 | vlc

	[snip]

You forgot to tell vlc which is the source:

	dvbstream -o 8192 | vlc -
	                       ~~~

Don't forget to run szap-s2 with this command. Otherwise, you must give dvbstream the frequency and the symbol rate of the transponder.

Cheers.

Signature · 2 lines
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
#17 lore raw
In reply to Andreas Kurz

Op zondag 08-03-2009 om 16:27 uur [tijdzone +0100], schreef Andreas Kurz:

Quoted 19 lines

Hi...

Still having some problems getting this card to work for me (Suse 11.1, KDE 4.1).
I have successfully installed the suggested non-main-repo, szap-s2 and dvbstream.
Unter Yast/TV-card I used the Experts button to tell the system to use a unknown tv-card with v4l2. Unfotunately dvbstream -o 8192 | vlc leaves me with

scyth@NotebookMMC:~> dvbstream -o 8192 | vlc
VLC media player 0.9.8a Grishenko
[00000001] main libvlc debug: VLC media player - version 0.9.8a Grishenko - (c) 1996-2008 the VideoLAN team
[00000001] main libvlc debug: libvlc was configured with ./configure '--host=i686-suse-linux-gnu' '--build=i686-suse-linux-gnu' '--target=i586-suse-linux' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--enable-gnomevfs' '--enable-ncurses' '--enable-wxwidgets' '--disable-pda' '--disable-macosx' '--disable-qnx' '--enable-xosd' '--enable-gnutls' '--enable-visual' '--disable-goom' '--enable-slp' '--enable-lirc' '--disable-joystick' '--disable-corba' '--enable-dvdread' '--enable-dvdnav' '--disable-dshow' '--enable-v4l' '--enable-v4l2' '--enable-pvr' '--enable-vcd' '--enable-satellite' '--enable-ogg' '--enable-mkv' '--enable-mod' '--enable-libcdio' '--enable-vcdx' '--enable-cddax' '--enable-libcddb' '--enable-x11' '--enable-xvideo' '--enable-glx' '--enable-fb' '--enable-mga' '--enable-freetype' '--enable-fribidi' '--disable-svg' '--disable-directx' '--disable-wingdi' '--disable-glide' '--enable-aa' '--enable-caca' '--enable-oss' '--disable-esd' '--enable-arts' '--enable-waveout' '--disable-coreaudio' '--disable-hd1000a' '--disable-hd1000v' '--enable-mad' '--enable-ffmpeg' '--enable-faad' '--enable-a52' '--enable-dca' '--enable-flac' '--enable-libmpeg2' '--enable-vorbis' '--enable-tremor' '--enable-speex' '--disable-tarkin' '--enable-theora' '--enable-cmml' '--enable-utf8' '--enable-pth' '--disable-st' '--disable-gprof' '--disable-cprof' '--disable-testsuite' '--enable-optimizations' '--disable-altivec' '--disable-debug' '--enable-release' '--enable-sout' '--with-ffmpeg-faac' '--disable-galaktos' '--enable-httpd' '--enable-jack' '--enable-mozilla' '--enable-alsa' '--enable-real' '--enable-realrtsp' '--enable-live555' '--with-live555-tree=/usr/lib/live' '--enable-fast-install' '--enable-dvbpsi' '--enable-dvb' '--enable-lua' '--enable-pulse' '--enable-asademux' '--enable-libproxy' '--enable-libass' '--enable-kate' '--enable-smb' '--enable-taglib' 'build_alias=i686-suse-linux-gnu' 'host_alias=i686-suse-linux-gnu' 'target_alias=i586-suse-linux' 'CFLAGS=-march=i586 -mtune=i686 -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' 'CXXFLAGS=-march=i586 -mtune=i686 -fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [00000001] main libvlc debug: translation test: code is "de"
dvbstream v0.6 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
dvbstream will stop after -1 seconds (71582788 minutes)
FD 0: DEMUX DEVICE: : No such file or directory
[00000001] main libvlc: vlc wird mit dem Standard-Interface ausgeführt. Benutzen Sie 'cvlc', um vlc ohne Interface zu verwenden.

Quoted 7 lines

With the most important part:

FD 0: DEMUX DEVICE: : No such file or directory

lsusb gives me:
Bus 004 Device 003: ID 0b48:300d TechnoTrend AG TT-connect CT-3650 CI

Forgive me for asking, but does this card really work with the s2api driver? If I'm not mistaken, the S2-3650 and the CT-3650 are different beasts, one is DVB-S, the other is DVB-C/T and uses totally different chipset, see:

http://www.linuxtv.org/pipermail/linux-dvb/2008-May/026288.html

Kind regards,

Alain