Skip to contentSkip to conversation

Add the "mfill" and "mcheck" memory commands.

PATCH New Benoit Monin 2 participants 2 messages Mar 6, 2009 – Mar 8, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add the "mfill" and "mcheck" memory commands.

Quoted 10 lines

De : "Wolfgang Denk"

Dear Benoit Monin,

Quoted 5 lines · In message <28907262.11403.1236090567026.JavaMail.www@wwinf8303> you wrote:

The mfill command writes the value of a counter to a memory area. The mcheck command verifies the memory area against the counter value. Those commands are useful for debugging memory/framebuffer controller.

Quoted 7 lines
Quoted 2 lines

The configuration option is CONFIG_MFILL and this only takes effect if the memory commands are activated globally (CONFIG_CMD_MEM).

What exactly is the purpose of this patch? Looks like an extremely simple memory test to me. Don't we have already a rich selection of better ones available yet?

I should have detailed more the intent of those commands. We have here a video controller embedded in an fpga with its own video ram. We use mfill to fill the video ram as fast as possible with variable data for each vram address. And we use mcheck to verify (as fast as possible) the content of the vram.

So this is not intended to test the main memory but it is a development and debug tool for peripheral containing memory.

I've sent a patch because they are useful to us and generic enough, and might be handy for debugging accesses to memory mapped behind programmable logic.

But maybe this debug tool is beyond the scope of U-Boot ?

Quoted 4 lines

Best regards,

Wolfgang Denk

Sincerely,
Beno?t.

--

Cr?ez votre adresse ?lectronique prenom.nom at laposte.net 1 Go d'espace de stockage, anti-spam et anti-virus int?gr?s.

#1 lore raw

PATCH 1/1 Add the "mfill" and "mcheck" memory commands.

Dear Benoit Monin,

Quoted 9 lines · In message <6148322.23690.1236356233840.JavaMail.www@wwinf8204> you wrote:
Quoted 8 lines
Quoted 3 lines

The configuration option is CONFIG_MFILL and this only takes effect if the memory commands are activated globally (CONFIG_CMD_MEM).

What exactly is the purpose of this patch? Looks like an extremely simple memory test to me. Don't we have already a rich selection of better ones available yet?

I should have detailed more the intent of those commands. We have here

Indeed.

Quoted 7 lines

a video controller embedded in an fpga with its own video ram. We use mfill to fill the video ram as fast as possible with variable data for each vram address. And we use mcheck to verify (as fast as possible) the content of the vram.

So this is not intended to test the main memory but it is a development and debug tool for peripheral containing memory.

You could use the existing memory tests to do the same.

Quoted 5 lines

I've sent a patch because they are useful to us and generic enough, and might be handy for debugging accesses to memory mapped behind programmable logic.

But maybe this debug tool is beyond the scope of U-Boot ?

I think it duplicates existing functionality.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Men don't talk peace unless they're ready to back it up with war.
	-- Col. Green, "The Savage Curtain", stardate 5906.4