U-boot debugger/emulator
Hi,
This question is related to U-boot; in particular debugging in a U-boot environment.
I am working on U-boot for the first time as well as working with the Atmel AT91SAM9 processor. I am used to working with emulators when debugging low level code such as embedded diagnostics.
I've never used the Atmel till now. In the past, I've worked with many PowerPCs, Freescale, and Microchip processors. All have had various emulators such as Microchip's ICD2, and with PowerPC I've used VisionClick, CodeTap, etc.
Can anyone suggest a good JTAG-based emulator with a good Windows or Linux-based debugger? Microchip's tools were very inexpensive and pretty powerful. PowerPC's were a bit more expensive. I need something where I can build U-boot with its makefiles, that we all know and love, load the code into flash and/or ram, set breakpoints, single-step, look at variables, look at C-source code, registers, possibly an IDE/editor, etc.
Any suggestions?
Thanks,
Steve
Signature · 2 lines
View this message in context: http://www.nabble.com/U-boot-debugger-emulator-tp22426368p22426368.html Sent from the Uboot - Users mailing list archive at Nabble.com.
--- On Mon, 3/9/09, Steven Zedeck <[email protected]> wrote:
PowerPC's were a bit more expensive. I need
Quoted 7 lines
something where I can
build U-boot with its makefiles, that we all know and love, load the code
into flash and/or ram, set breakpoints, single-step, look at variables, look
at C-source code, registers, possibly an IDE/editor, etc.
Quoted 9 lines
Any suggestions?
Thanks,
SteveSignature · 4 lines
View this message in context: http://www.nabble.com/U-boot-debugger-emulator-tp22426368p22426368.html Sent from the Uboot - Users mailing list archive at Nabble.com.
BDI3000.
Quoted 4 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Quoted 14 lines · Steven Zedeck
Hi,
This question is related to U-boot; in particular debugging in a U-boot environment.I am working on U-boot for the first time as well as working with the Atmel AT91SAM9 processor. I am used to working with emulators when debugging low level code such as embedded diagnostics.
I've never used the Atmel till now. In the past, I've worked with many PowerPCs, Freescale, and Microchip processors. All have had various emulators such as Microchip's ICD2, and with PowerPC I've used VisionClick, CodeTap, etc.
Quoted 6 lines
Can anyone suggest a good JTAG-based emulator with a good Windows or Linux-based debugger? Microchip's tools were very inexpensive and pretty powerful. PowerPC's were a bit more expensive. I need something where I can build U-boot with its makefiles, that we all know and love, load the code into flash and/or ram, set breakpoints, single-step, look at variables, look at C-source code, registers, possibly an IDE/editor, etc.
You will have 2 good ICE with multiple ARCH support
PEEDI from Ronetix (with dataflash, NAND and OneNAND support I'll recommand for AT91)
or BDI3000 from Abatron
The both work well on MacOS, Linux and Windows
Best Regards,
J.
Hi,
This looks very good. I have a couple of questions. I see on their web site that they offer a product called bdiRDI which allows you to use a source level debugger. I didn't see that they sell any source level debugger. What do you folks use as a source level debugger? Cost is an issue, however, I don't want to sacrifice quality and features too much.
Did you purchase or obtain your source debugging application elsewhere? Or do you use GDB? I haven't use that before. I'm used to a source level debugger I believe.
thanks,
Steve
--------
Quoted 44 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 17 lines · Steven Zedeck
Hi,
This question is related to U-boot; in particular debugging in a U-boot environment.I am working on U-boot for the first time as well as working with the Atmel
AT91SAM9 processor. I am used to working with emulators when debugging low
level code such as embedded diagnostics.I've never used the Atmel till now. In the past, I've worked with many PowerPCs, Freescale, and Microchip processors. All have had various emulators such as Microchip's ICD2, and with PowerPC I've used VisionClick,
CodeTap, etc.Quoted 8 lines
Can anyone suggest a good JTAG-based emulator with a good Windows or Linux-based debugger? Microchip's tools were very inexpensive and pretty powerful. PowerPC's were a bit more expensive. I need something where I can
build U-boot with its makefiles, that we all know and love, load the code into flash and/or ram, set breakpoints, single-step, look at variables, look
at C-source code, registers, possibly an IDE/editor, etc.You will have 2 good ICE with multiple ARCH support PEEDI from Ronetix (with dataflash, NAND and OneNAND support I'll recommand
for AT91)or BDI3000 from Abatron
The both work well on MacOS, Linux and Windows
Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/U-boot-debugger-emulator-tp22426368p22433049.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear Steven Zedeck,
Quoted 6 lines · In message <[email protected]> you wrote:
This looks very good. I have a couple of questions. I see on their web site that they offer a product called bdiRDI which allows you to use a source level debugger. I didn't see that they sell any source level debugger. What do you folks use as a source level debugger? Cost is an issue, however, I don't want to sacrifice quality and features too much.
You want the bundle BDI3000 with firmware bdiGDB - interface firmware for GNU debugger.
Quoted 3 lines
Did you purchase or obtain your source debugging application elsewhere? Or do you use GDB? I haven't use that before. I'm used to a source level debugger I believe.
So what do you think GDB is? It is one of the most powerful source level debuggers that are available.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The heart is not a logical organ. -- Dr. Janet Wallace, "The Deadly Years", stardate 3479.4
I see that this bundle is $2640US which is beyond my budget. I need to find another approach.
Debugging with printfs is starting to bother me and waste time.
Also, I am not totally familiar with GDB (GNU debugger). I may need to read a bit about it.
thanks,
Steve
Quoted 40 lines · wd
Dear Steven Zedeck,
Quoted 8 lines · In message <[email protected]> you wrote:
This looks very good. I have a couple of questions. I see on their web site
that they offer a product called bdiRDI which allows you to use a source level debugger. I didn't see that they sell any source level debugger. What
do you folks use as a source level debugger? Cost is an issue, however, I don't want to sacrifice quality and features too much.You want the bundle BDI3000 with firmware bdiGDB - interface firmware for GNU debugger.
Quoted 4 lines
Did you purchase or obtain your source debugging application elsewhere? Or
do you use GDB? I haven't use that before. I'm used to a source level debugger I believe.So what do you think GDB is? It is one of the most powerful source level debuggers that are available.
Best regards,
Wolfgang Denk
Signature · 9 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The heart is not a logical organ. -- Dr. Janet Wallace, "The Deadly Years", stardate 3479.4 _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/U-boot-debugger-emulator-tp22426368p22434961.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 4 lines · Steven Zedeck
I see that this bundle is $2640US which is beyond my budget. I need to find another approach.
Debugging with printfs is starting to bother me and waste time.
PEEDI is $2080US
but all real ICE will be near
Best Regards,
J.
In my last position where we used Microchip processors, I was able to get the Microchip ICD2 JTAG probe/emulator for less than $200 and the windows-based debugger software was free; all from Microchip I must be spoiled.
Thanks,
Steve
Quoted 19 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 5 lines · Steven Zedeck
I see that this bundle is $2640US which is beyond my budget. I need to find
another approach.
Debugging with printfs is starting to bother me and waste time.PEEDI is $2080US
but all real ICE will be near
Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/U-boot-debugger-emulator-tp22426368p22436327.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 4 lines · Steven Zedeck
In my last position where we used Microchip processors, I was able to get the Microchip ICD2 JTAG probe/emulator for less than $200 and the windows-based debugger software was free; all from Microchip I must be spoiled.
It's for small micro-controller not ARM9
It's not comparable to a generic ICE which can be updated to support CORTEX A8, PPC, MIPS, etc...
Best Regards,
J.
I agree that a generic solution is better, but....
We use the Abatron BDI3000 for our current project (using the bdiGDB firmware for the MPC5xx/8xx). If we want to use this JTAG/BDM with, say an ARM processor, we must pay Abatron appox. half the price of a new BDI when switching firmware. I think the cost here eats up the advantage of having a generic product.
Regards,
Frank
Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 4 lines · Steven Zedeck
In my last position where we used Microchip processors, I was able to get the Microchip ICD2 JTAG probe/emulator for less than $200 and the windows-based debugger software was free; all from Microchip ?I must be spoiled.
It's for small micro-controller not ARM9
It's not comparable to a generic ICE which can be updated to support CORTEX A8, PPC, MIPS, etc...Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Quoted 5 lines · Frank Svendsb?e
I agree that a generic solution is better, but....
We use the Abatron BDI3000 for our current project (using the bdiGDB firmware for the MPC5xx/8xx). If we want to use this JTAG/BDM with, say an ARM processor, we must pay Abatron appox. half the price of a new BDI when switching firmware. I think the cost here eats up the advantage of having a generic product.
You work with Steven Zedeck?
If you already have a BDI3000 you will just have to buy the ARM7/9 FW arroud 950? IIRC
Best Regards,
J.
Quoted 7 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 5 lines · Frank Svendsb?e
I agree that a generic solution is better, but....
We use the Abatron BDI3000 for our current project (using the bdiGDB firmware for the MPC5xx/8xx). If we want to use this JTAG/BDM with, say an ARM processor, we must pay Abatron appox. half the price of a new BDI when switching firmware. I think the cost here eats up the advantage of having a generic product.You work with Steven Zedeck?
No. I just had an opinion regarding the BDI.
Quoted 3 lines
If you already have a BDI3000 you will just have to buy the ARM7/9 FW arroud 950? IIRC
I've already got it, not Mr. Zedeck.. I think 950? is "a lot" for just the firmware. They've got 6 different
bdiGDB versions just for the PPC architecture. I feel that it's wrong to use the term generic when
you must pay 950? and flash the firmware for each new target. But don't get me wrong though, the BDI
rocks!
Btw, is any of you guys using the self-made MPCBDM? I'd like to use it on 82xx or 83xx, if possible.
Regards,
Frank
Dear Frank,
Quoted 3 lines · In message <[email protected]> you…
Btw, is any of you guys using the self-made MPCBDM? I'd like to use it on 82xx or 83xx, if possible.
We used to use (and even sell) those. The can only be used with MPC5xx/8xx systems which have a BDM interface; 82xx, 83xx etc. have a JTAG based COP interface for which no specification is publicly available (you can get it by signing a NDA, but the NDA terms prevent you from implementing support for this in Open Source software).
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de On a clear disk you can seek forever.
Dear Frank,
Quoted 4 lines · In message <[email protected]> you…
I agree that a generic solution is better, but....
We use the Abatron BDI3000 for our current project (using the bdiGDB firmware for the MPC5xx/8xx). If we want to use this JTAG/BDM with, say an ARM processor, we must pay Abatron appox. half the price of a new BDI when switching firmware.
Um... not really. Normally the price for the firmware alone is less than 40% of the price for the bundle BDI3000 with firmware.
Quoted 1 line
I think the cost here eats up the advantage of having a generic product.
Well, with hardware-specific products you always have to pay the full price. That's even worse. And probably your interfaces (including the user interface) are changing, too.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Quote from the Boss after overriding the decision of a task force he created to find a solution: "I'm sorry if I ever gave you the impression your input would have any effect on my decision for the outcome of this project!"
Quoted 11 lines · Wolfgang Denk
Dear Frank,
Quoted 4 lines · In message <[email protected]> you…
I agree that a generic solution is better, but....
We use the Abatron BDI3000 for our current project (using the bdiGDB firmware for the MPC5xx/8xx). If we want to use this JTAG/BDM with, say an ARM processor, we must pay Abatron appox. half the price of a new BDI when switching firmware.Um... not really. Normally the price for the firmware alone ?is ?less than 40% of the price for the bundle BDI3000 with firmware.
Ok, I exaggerated. We payed 2500$ including firmware worth 950. That's 38%.
Quoted 6 lines
Quoted 1 line
I think the cost here eats up the advantage of having a generic product.
Well, with hardware-specific products you always have to pay the full price. That's even worse. And probably your interfaces (including the user interface) are changing, too.
Most often yes, but how much interface changes regarding BDM communcation is there between, say 8xx and 82xx? I'm sure you know the exact details ;-)
Regards,
Frank
Hi Steven,
Quoted 6 lines
Quoted 3 lines
Did you purchase or obtain your source debugging application elsewhere? Or do you use GDB? I haven't use that before. I'm used to a source level debugger I believe.
So what do you think GDB is? It is one of the most powerful source level debuggers that are available.
If you are looking for a GUI _on top_ of the source level debugger, you have also a few options. Our TWiki gives an example[1] on using the quite attractive ddd[2].
Cheers
Detlev
[1] http://www.denx.de/wiki/view/DULG/DebuggingGUI
[2] http://www.gnu.org/software/ddd/
Signature · 5 lines
Shin: a device for finding furniture in the dark. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
Dear Steven Zedeck,
Quoted 7 lines · In message <[email protected]> you wrote:
Can anyone suggest a good JTAG-based emulator with a good Windows or Linux-based debugger? Microchip's tools were very inexpensive and pretty powerful. PowerPC's were a bit more expensive. I need something where I can build U-boot with its makefiles, that we all know and love, load the code into flash and/or ram, set breakpoints, single-step, look at variables, look at C-source code, registers, possibly an IDE/editor, etc.
As already mentioned, we too strongly recommend the BDI3000 by Abatron. It fits perfectly into a GNU toolchain based development environment, has full MMU support (which is essential when it comes to Linux kernel debugging) and supports a wide range of embedded processors - ARM, PowerPC, MIPS, ColdFire, ...
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Where there's no emotion, there's no motive for violence. -- Spock, "Dagger of the Mind", stardate 2715.1