reason for delay in arch/x86/kernel/traps.c::io_check_error()?
Hi all,
I was just wondering about the basis for the delay in io_check_error().
The ICH7 manual doesn't have any mention of a delay being required
here--is it necessary for other hardware, something not mentioned in the manual, or just an accident?
Thanks,
Chris
Quoted 7 lines · Chris Friesen
Hi all,
I was just wondering about the basis for the delay in
io_check_error().
The ICH7 manual doesn't have any mention of a delay being required
here--is it necessary for other hardware, something not mentioned in the manual, or just an accident?
The complete NMI error logging handling does not really apply to any modern chipset; it's for ancient hardware (286, 386 generation). Those often needed strange delays too.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
Quoted 7 lines · Chris Friesen
Hi all,
I was just wondering about the basis for the delay in
io_check_error(). The ICH7 manual doesn't have any mention of a delay being required here--is it necessary for other hardware, something not mentioned in the manual, or just an accident?
That code has seriously bitrotten along the years. All those port 61H accesses:
arch/x86/kernel/traps.c: reason = get_nmi_reason(); arch/x86/kernel/traps.c: outb(reason, 0x61); arch/x86/kernel/traps.c: outb(reason, 0x61); arch/x86/kernel/traps.c: outb(reason, 0x61);
... are often wrong on modern chipsets - including the logic in io_check_error(). But we dont really have lowlevel chipset drivers on this level in Linux, so there's nothing suitable to replace it with and it never got fixed.
Can you see this trigger on a box perhaps? Or are you worried about the potential unbound execution time of this function which can be up to 2 seconds in NMI context?
Ingo
Quoted 8 lines · Ingo Molnar
Quoted 3 lines · Chris Friesen
Hi all,
I was just wondering about the basis for the delay in
io_check_error(). The ICH7 manual doesn't have any mention of a delay being required here--is it necessary for other hardware, something not mentioned in the manual, or just an accident?That code has seriously bitrotten along the years. All those port 61H accesses:
Quoted 8 lines
arch/x86/kernel/traps.c: reason = get_nmi_reason(); arch/x86/kernel/traps.c: outb(reason, 0x61); arch/x86/kernel/traps.c: outb(reason, 0x61); arch/x86/kernel/traps.c: outb(reason, 0x61);... are often wrong on modern chipsets - including the logic in
io_check_error(). But we dont really have lowlevel chipset drivers on this level in Linux, so there's nothing suitable to replace it with and it never got fixed.Can you see this trigger on a box perhaps? Or are you worried about the potential unbound execution time of this function which can be up to 2 seconds in NMI context?
This is in the context of an embedded highly available compute blade. As part of our enhanced error handling we've modified the memory parity error code to reenable rather than disable the error line.
Given that the memory and IO code paths are just different bits in the same register we originally added the delay to the memory parity path as well. However, we subsequently hit the memory parity error path, and the 2sec delay triggered our hardware watchdog causing the board to reboot.
As you can imagine this is undesirable, so we were hoping to remove the delay from both paths. From what you've said and the fact that no delay is mentioned in the chip manual, it seems like this should be fairly safe.
Thanks,
Chris