Conform L3 Cache Index Disable to Linux standards
PATCH 1/1 Conform L3 Cache Index Disable to Linux standards
Add ABI Documentation entry and fix some /sys directory formating issues with the L3 Cache Index Disable feature for future AMD processors. Add a check to disable it for family 0x10 models that do not support it yet.
Documentation/ABI/testing/sysfs-devices-cache_disable new file +18 -0
@@ -0,0 +1,18 @@ +What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X +Date: August 2008 +KernelVersion: 2.6.27 +Contact: [email protected] +Description: These files exist in every cpu's cache index directories. + There are currently 2 cache_disable_# files in each + directory. Reading from these files on a supported + processor will return that cache disable index value + for that processor and node. Writing to one of these + files will cause the specificed cache index to be disabled. + + Currently, only AMD Family 10h Processors support cache index + disable, and only for their L3 caches. See the BIOS and + Kernel Developer's Guide at + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf + for formatting information and other details on the + cache index disable. +Users: [email protected]
arch/x86/kernel/Makefile +1 -1
@@ -81,7 +81,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o -obj-$(CONFIG_K8_NB) += k8.o +obj-y += k8.o obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
arch/x86/kernel/cpu/intel_cacheinfo.c +74 -102
218 lines not on this page · raw message
H. Peter Anvin
reviewerQuoted 4 lines · Mark Langsdorf
Add ABI Documentation entry and fix some /sys directory formating issues with the L3 Cache Index Disable feature for future AMD processors. Add a check to disable it for family
0x10models that do not support it yet.
I went to try to apply this patch to -tip, but I *cannot* do so without a Signed-off-by: line.
(This also means I have done no testing whatsoever.)
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
Quoted 35 lines · Mark Langsdorf
Add ABI Documentation entry and fix some /sys directory formating issues with the L3 Cache Index Disable feature for future AMD processors. Add a check to disable it for family
0x10models that do not support it yet.Documentation/ABI/testing/sysfs-devices-cache_disable new file +18
-0@@ -0,0 +1,18 @@ +What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X +Date: August 2008 +KernelVersion: 2.6.27 +Contact: [email protected] +Description: These files exist in every cpu's cache index directories. + There are currently 2 cache_disable_# files in each + directory. Reading from these files on a supported + processor will return that cache disable index value + for that processor and node. Writing to one of these + files will cause the specificed cache index to be disabled. + + Currently, only AMD Family 10h Processors support cache index + disable, and only for their L3 caches. See the BIOS and + Kernel Developer's Guide at + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf + for formatting information and other details on the + cache index disable. +Users: [email protected]arch/x86/kernel/Makefile +0
-0
arch/x86/kernel/Makefile obj-$(CONFIG_EARLY_PRINTK) += early_printk.o · line 84
Quoted 5 lines
arch/x86/kernel/Makefile +1
-1@@ -81,7 +81,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o -obj-$(CONFIG_K8_NB) += k8.o +obj-y += k8.o
This affects all configurations that don't have a k8 northbridge as well:
text data bss dec hex filename
3277392 330356 327680 3935428 3c0cc4 vmlinux
text data bss dec hex filename
3277891 330452 327680 3936023 3c0f17 vmlinux.with.k8.c
Please consider leaving that conditional compilation as is and define dummy accessors for when this code is disabled.
Quoted 73 lines
arch/x86/kernel/Makefile +0
-0obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.oarch/x86/kernel/cpu/intel_cacheinfo.c +33
-8@@ -18,6 +18,9 @@#include <asm/processor.h> #include <asm/smp.h> +#include <linux/pci.h> +#include <asm/k8.h> +#define LVL_1_INST 1#define LVL_1_DATA 2#define LVL_2 3@@ -159,14 +162,6 @@ struct _cpuid4_info_regs {unsigned long can_disable; }; -#if defined(CONFIG_PCI ) && defined(CONFIG_SYSFS ) -static struct pci_device_id k8_nb_id[] = { - {PCI_DEVICE (PCI_VENDOR_ID_AMD ,0x1103 ) }, - {PCI_DEVICE (PCI_VENDOR_ID_AMD ,0x1203 ) }, - {} -}; -#endif -unsigned short num_cache_leaves;/* AMD doesn't have CPUID4. Emulate it here to report the same @@ -291,6 +286,12 @@ amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf) {if (index <3 )return ; +if (boot_cpu_data.x86 ==0x11 ) +return ; + +if ((boot_cpu_data.x86 ==0x10 ) && (boot_cpu_data.x86_model <0x15 )) +return ; + this_leaf->can_disable =1 ; }@@ -639,6 +640,64 @@ static ssize_t show_##file_name \return sprintf (buf,"%lu\n" , (unsigned long )this_leaf->object + val); \ } +static ssize_t show_cache_disable (struct _cpuid4_info *this_leaf,char *buf, +unsigned int index) +{ +int node =cpu_to_node (first_cpu (this_leaf->shared_cpu_map)); +struct pci_dev *dev = k8_northbridges[node]; +unsigned int reg =0 ; + +if (!this_leaf->can_disable) +return -EINVAL ; + +pci_read_config_dword (dev,0x1BC + index *4 , ®); +return sprintf (buf,"%x\n" , reg); +} + +#define SHOW_CACHE_DISABLE (index) \ +static ssize_t \ +show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf) \ +{ \ + return show_cache_disable(this_leaf, buf, index); \ +} + +static ssize_t +store_cache_disable (struct _cpuid4_info *this_leaf,const char *buf, +size_t count,unsigned int index)
arch/x86/kernel/cpu/intel_cacheinfo.c static ssize_t show_##file_name \ · line 676
Quoted 10 lines
arch/x86/kernel/cpu/intel_cacheinfo.c +10
-0+{ +int node =cpu_to_node (first_cpu (this_leaf->shared_cpu_map)); +struct pci_dev *dev = k8_northbridges[node]; +unsigned long val =0 ; + +if (!this_leaf->can_disable) +return -EINVAL ; + +if (!capable (CAP_SYS_ADMIN )) +return -EPERM ;
This means a user that is never allowed to write sometimes gets an 'Invalid argument' instead of the 'Permission denied'. Perhaps it's better to do that permission check first?
Hannes