ide-iops: only clear DMA words on setting DMA mode
PATCH 1/1 ide-iops: only clear DMA words on setting DMA mode
The bytes indicating current DMA mode in the identify data words 62, 63, and 88 should only change on setting a DMA mode, so stop clearing them on setting PIO mode in ide_config_drive_speed(). While at it, correct SW/MW DMA mode masks...
Signed-off-by Sergei Shtylyov <[email protected]>
---
This patch is against the recent Linus' tree...
drivers/ide/ide-iops.c | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-)
drivers/ide/ide-iops.c +5 -3
@@ -774,9 +774,11 @@ int ide_config_drive_speed(ide_drive_t *return error; } - id[ATA_ID_UDMA_MODES ] &= ~0xFF00 ; - id[ATA_ID_MWDMA_MODES ] &= ~0x0F00 ; - id[ATA_ID_SWDMA_MODES ] &= ~0x0F00 ; +if (speed >=XFER_SW_DMA_0 ) { + id[ATA_ID_UDMA_MODES ] &= ~0xFF00 ; + id[ATA_ID_MWDMA_MODES ] &= ~0x0700 ; + id[ATA_ID_SWDMA_MODES ] &= ~0x0700 ; + } skip: #ifdef CONFIG_BLK_DEV_IDEDMA
Bartlomiej Zolnierkiewicz
AppliedQuoted 5 lines · Sergei Shtylyov
The bytes indicating current DMA mode in the identify data words 62, 63, and 88 should only change on setting a DMA mode, so stop clearing them on setting PIO mode in
ide_config_drive_speed(). While at it, correct SW/MW DMA mode masks...Signed-off-by Sergei Shtylyov <[email protected]>
applied