Skip to contentSkip to conversation

skb_over_panic kernel panic

DISCUSSION Christian 2 participants 4 messages Mar 11, 2009 – Mar 13, 2009

Subsystems (2)
lore
Share & tools
lore

Christian

author
#0 lore raw

Hello,

I keep getting kernel panics on my system with output similar to this:

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580 head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0 --------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580 put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P 2.6.28.7 #3

RIP: 0010:[<ffffffff80531630>] [<ffffffff80531630>] skb_put+0x7a/0x89
RSP: 0018:ffff8801bf9b3dd0 EFLAGS: 00010282

(I copied this output by hand so there may be a typo or two)

Linux server1 2.6.28.7 #3 SMP Mon Mar 9 20:04:12 EDT 2009 x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux

Before this my kernel was 2.6.27.5 and I was still getting the same panics.

eth0: RTL8168c/8111c at 0xffffc20000042000, 00:23:54:ed:7f:a6, XID 3c4000c0 IRQ 18
r8169: eth0: link up

00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to ESI Port (rev 12)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 (rev 12)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 (rev 12)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 (rev 12)
00:10.0 PIC: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 0 (rev 12)
00:10.1 PIC: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 (rev 12)
00:13.0 PIC: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller (rev 12)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System Management Registers (rev 12)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers (rev 12)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers (rev 12)
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle Registers (rev 12)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
08:01.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA 300 TX4) (rev 02)

# lsmod
Module                  Size  Used by
nvidia               7797560  0 
author
#1 lore raw

I've traced down this problem some more. It only happens when I send more than a small amount of data from my OSX86 system to my linux server. I can download files from the linux server without any problems, but if I begin to upload anything it will kernel panic the system in 2 seconds or less. I haven't had any problem with regular SSH sessions, but if I send files using scp or SMB the linux kernel panics almost immediately.

My OSX86 system is using an Asus Striker Extreme with onboard Marvell 88E1116 Gigabit Ethernet 10/100/1000Mbps and the driver is nForcEthernetDriver.kext which uses forcedeth.

-rwxr-xr-x 1 root wheel 131148 Feb 22 2008
nForcEthernetDriver.kext/Contents/MacOS/forcedeth

Quoted 109 lines · Christian

Hello,

I keep getting kernel panics on my system with output similar to this:

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580 head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0 --------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580 put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P 2.6.28.7 #3

RIP: 0010:[<ffffffff80531630>] [<ffffffff80531630>] skb_put+0x7a/0x89
RSP: 0018:ffff8801bf9b3dd0 EFLAGS: 00010282

(I copied this output by hand so there may be a typo or two)

Linux server1 2.6.28.7 #3 SMP Mon Mar 9 20:04:12 EDT 2009 x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux

Before this my kernel was 2.6.27.5 and I was still getting the same panics.

eth0: RTL8168c/8111c at 0xffffc20000042000, 00:23:54:ed:7f:a6, XID 3c4000c0 IRQ 18
r8169: eth0: link up

00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to ESI Port (rev 12)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 (rev 12)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 (rev 12)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 (rev 12)
00:10.0 PIC: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 0 (rev 12)
00:10.1 PIC: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 (rev 12)
00:13.0 PIC: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller (rev 12)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System Management Registers (rev 12)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers (rev 12)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers (rev 12)
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle Registers (rev 12)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
08:01.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA 300 TX4) (rev 02)

# lsmod
Module                  Size  Used by
nvidia               7797560  0 

--
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to Christian

Christian <[email protected]> :
[...]

Quoted 10 lines

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580 head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0 --------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580 put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P 2.6.28.7 #3

[...]

Quoted 3 lines
# lsmod
Module                  Size  Used by
nvidia               7797560  0 

Can you reproduce the bug when nvidia's module is not loaded after boot ?

Signature · 1 line
Ueimor
author
#3 lore raw

Yes I booted without loading the nvidia module and have the same problem.

Quoted 23 lines · Francois Romieu

Christian <[email protected]> :
[...]

Quoted 10 lines

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580 head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0 --------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580 put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P 2.6.28.7 #3

[...]

Quoted 3 lines
# lsmod
Module                  Size  Used by
nvidia               7797560  0 

Can you reproduce the bug when nvidia's module is not loaded after boot ?

Signature · 1 line
Ueimor