[2.6.30] What's in the async boot tree
The following changes since commit 326d8519fc97be186c55ac605c3a7c957c758ae1:
Linus Torvalds (1):
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30.git master
Arjan van de Ven (2):
async: remove the temporary (2.6.29) "async is off by default" code ide/net: flip the order of SATA and network init
Li, Shaohua (1):
fastboot: remove duplicate unpack_to_rootfs()
drivers/Makefile | 5 ++- init/initramfs.c | 71 ++++++++++++++++++++++++++++++++++++++++++----------- kernel/async.c | 10 +------- 3 files changed, 60 insertions(+), 26 deletions(-)
I will reply to this email with the three patches
Signature · 3 lines
Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
PATCH 1/1 async: remove the temporary (2.6.29) "async is off by default" code
Quoted 1 line
From
bfcfecd5ccfaa76011d8eba8f6c8ed486d57e0abMon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Sun, 15 Mar 2009 11:11:44 -0700
Subject: [PATCH] async: remove the temporary (2.6.29) "async is off by default" code
Now that everyone has been able to test the async code (and it's being used in the Moblin betas by default), we can enable it by default. The various fixes needed have gone into 2.6.29 already.
--- kernel/async.c | 10 +--------- 1 files changed, 1 insertions(+), 9 deletions(-)
kernel/async.c +1 -9
@@ -391,16 +391,8 @@ static int __init async_init(void)if (IS_ERR (kthread_run (async_manager_thread,NULL ,"async/mgr" ))) async_enabled =0 ; -return 0 ; -} - -static int __init setup_async (char *str) -{ async_enabled =1 ; -return 1 ; +return 0 ; } -__setup ("fastboot" , setup_async); - -core_initcall (async_init);
Signature · 9 lines
1.6.0.6 -- Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Re: [PATCH] async: remove the temporary (2.6.29) "async is off by default" code
Quoted 27 lines · Arjan van de Ven
From
bfcfecd5ccfaa76011d8eba8f6c8ed486d57e0abMon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Sun, 15 Mar 2009 11:11:44 -0700
Subject: [PATCH] async: remove the temporary (2.6.29) "async is off by default" codeNow that everyone has been able to test the async code (and it's being used in the Moblin betas by default), we can enable it by default. The various fixes needed have gone into 2.6.29 already.
Signed-off-by Arjan van de Ven <[email protected]>--- kernel/async.c | 10 +--------- 1 files changed, 1 insertions(+), 9 deletions(-)kernel/async.c +0
-4@@ -391,16 +391,8 @@ static int __init async_init(void)if (IS_ERR (kthread_run (async_manager_thread,NULL ,"async/mgr" ))) async_enabled =0 ; -return 0 ; -} - -static int __init setup_async (char *str)
kernel/async.c static int __init async_init(void) · line 398
Quoted 10 lines
kernel/async.c +1
-5-{ async_enabled =1 ; -return 1 ; +return 0 ; } -__setup ("fastboot" , setup_async); - -core_initcall (async_init);
Arjan, when I try this one - kernel will not boot. I see it initializing the touchpad and then wait for ever. If I pass fastboot on cmdline - it works OK. Any ideas?
Thanks, Woody
Signature · 1 line
Woody Suwalski, Xandros, Ottawa, Canada, 1-613-842-3498 x414
Re: [PATCH] async: remove the temporary (2.6.29) "async is off by default" code
In reply to Arjan van de VenQuoted 10 lines · Arjan van de Ven
kernel/async.c +0
-4@@ -391,16 +391,8 @@ static int __init async_init(void)if (IS_ERR (kthread_run (async_manager_thread,NULL ,"async/mgr" ))) async_enabled =0 ; -return 0 ; -} - -static int __init setup_async (char *str)
kernel/async.c static int __init async_init(void) · line 398
Quoted 10 lines
kernel/async.c +1
-5-{ async_enabled =1 ; -return 1 ; +return 0 ; } -__setup ("fastboot" , setup_async); - -core_initcall (async_init);
From: Stefan Richter <[email protected]>
Subject: async: enable it for real
Fix 'async: remove the temporary (2.6.29) "async is off by default" code'.
Also warn if the thread couldn't be started. A start failure may have serious side effects when more code starts to use <linux/async.h>.
---
Only compile-tested.
kernel/async.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
kernel/async.c +5 -5
@@ -49,6 +49,7 @@ asynchronous and synchronous parts of th*/ #include <linux/async.h> +#include <linux/bug.h> #include <linux/module.h> #include <linux/wait.h> #include <linux/sched.h>
@@ -387,11 +388,10 @@ static int async_manager_thread(void *unstatic int __init async_init (void ) { -if (async_enabled) -if (IS_ERR (kthread_run (async_manager_thread,NULL , -"async/mgr" ))) - async_enabled =0 ; - async_enabled =1 ; + async_enabled = + !IS_ERR (kthread_run (async_manager_thread,NULL ,"async/mgr" )); + +WARN_ON (!async_enabled);return 0 ; }
Signature · 3 lines
Stefan Richter -=====-==--= --== =---- http://arcgraph.de/sr/
Re: [PATCH] async: remove the temporary (2.6.29) "async is off by default" code
Quoted 2 lines · On Mon, 16 Mar 2009 20:29:04 +0100 (CET) Stefan Richter…
(
async_manager_thread, NULL,Quoted 1 line
DOh brown paper bag time.
This is so bad that I feel I need to redo the original patch; I'll credit it to you though.
Signature · 3 lines
Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
PATCH 1/1 ide/net: flip the order of SATA and network init
In reply to Arjan van de VenQuoted 1 line
From
7c73393acfcce11a8d8ee661e08bae24fc17af61Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Mon, 26 Jan 2009 18:58:11 -0800
Subject: [PATCH] ide/net: flip the order of SATA and network init
this patch flips the order in which sata and network drivers are initialized.
SATA probing takes quite a bit of time, and with the asynchronous infrastructure other drivers that run after it can execute in parallel. Network drivers do tend to take some real time talking to the hardware, so running these later is a good thing (the sata probe then runs concurrent)
This saves about 15% of my kernels boot time.
Both Dave and Jeff acked this patch and suggested it should go via the async tree.
--- drivers/Makefile | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/Makefile +3 -2
@@ -36,13 +36,14 @@ obj-$(CONFIG_FB_INTEL) += video/intelfb/ obj-y += serial/ obj-$(CONFIG_PARPORT) += parport/ -obj-y += base/ block/ misc/ mfd/ net/ media/ +obj-y += base/ block/ misc/ mfd/ media/ obj-$(CONFIG_NUBUS) += nubus/ -obj-$(CONFIG_ATM) += atm/ obj-y += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_SCSI) += scsi/ obj-$(CONFIG_ATA) += ata/ +obj-y += net/ +obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_FIREWIRE) += firewire/ obj-y += ieee1394/
Signature · 9 lines
1.6.0.6 -- Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
PATCH 1/1 fastboot: remove duplicate unpack_to_rootfs()
In reply to Arjan van de VenQuoted 1 line
From
4ea6c5331652555dcc96b86e078b7dceaa38005bMon Sep 17 00:00:00 2001
From: Li, Shaohua <[email protected]>
Date: Wed, 13 Aug 2008 17:26:01 +0800
Subject: [PATCH] fastboot: remove duplicate unpack_to_rootfs()
we check if initrd is initramfs first and then do the real unpack. The check isn't required, we can directly do unpack. If the initrd isn't an initramfs, we can remove the garbage. In my laptop, this saves 0.1s boot time.
This patch penalizes non-initramfs initrd case, but nowadays, initramfs is the most widely used method for initrds.
--- init/initramfs.c | 71 ++++++++++++++++++++++++++++++++++++++++++----------- 1 files changed, 56 insertions(+), 15 deletions(-)
init/initramfs.c +56 -15
@@ -5,6 +5,7 @@#include <linux/fcntl.h> #include <linux/delay.h> #include <linux/string.h> +#include <linux/dirent.h> #include <linux/syscalls.h> #include <linux/utime.h>
@@ -166,8 +167,6 @@ static __initdata char *victim;static __initdata unsigned count;static __initdata loff_t this_header, next_header; -static __initdata int dry_run; -static inline void __init eat (unsigned n) { victim += n;
@@ -229,10 +228,6 @@ static int __init do_header(void)parse_header (collected); next_header = this_header +N_ALIGN (name_len) + body_len; next_header = (next_header +3 ) & ~3 ; -if (dry_run) { -read_into (name_buf,N_ALIGN (name_len), GotName); -return 0 ; - } state = SkipIt;if (name_len <=0 || name_len >PATH_MAX )return 0 ;
@@ -303,8 +298,6 @@ static int __init do_name(void)free_hash ();return 0 ; } -if (dry_run) -return 0 ;clean_path (collected, mode);if (S_ISREG (mode)) {int ml =maybe_link ();
@@ -476,10 +469,9 @@ static void __init flush_window(void) outcnt =0 ; } -static char *__init unpack_to_rootfs (char *buf,unsigned len,int check_only) +static char *__init unpack_to_rootfs (char *buf,unsigned len) {int written; - dry_run = check_only; header_buf =kmalloc (110 ,GFP_KERNEL ); symlink_buf =kmalloc (PATH_MAX +N_ALIGN (PATH_MAX ) +1 ,GFP_KERNEL ); name_buf =kmalloc (N_ALIGN (PATH_MAX ),GFP_KERNEL );
@@ -574,10 +566,57 @@ skip: initrd_end =0 ; } +#define BUF_SIZE 1024 +static void __init clean_rootfs (void ) +{ +int fd; +void *buf; +struct linux_dirent64 *dirp; +int count; + + fd =sys_open ("/" ,O_RDONLY ,0 ); +WARN_ON (fd <0 ); +if (fd <0 ) +return ; + buf =kzalloc (BUF_SIZE ,GFP_KERNEL ); +WARN_ON (!buf); +if (!buf) { +sys_close (fd); +return ; + } + + dirp = buf; + count =sys_getdents64 (fd, dirp,BUF_SIZE ); +while (count >0 ) { +while (count >0 ) { +struct stat st; +int ret; + + ret =sys_newlstat (dirp->d_name, &st); +WARN_ON_ONCE (ret); +if (!ret) { +if (S_ISDIR (st.st_mode)) +sys_rmdir (dirp->d_name); +else +sys_unlink (dirp->d_name); + } + + count -= dirp->d_reclen; + dirp = (void *)dirp + dirp->d_reclen; + } + dirp = buf; +memset (buf,0 ,BUF_SIZE ); + count =sys_getdents64 (fd, dirp,BUF_SIZE ); + } + +sys_close (fd); +kfree (buf); +} +static int __init populate_rootfs (void ) {char *err =unpack_to_rootfs (__initramfs_start, - __initramfs_end - __initramfs_start,0 ); + __initramfs_end - __initramfs_start);if (err)panic (err);if (initrd_start) {
@@ -585,13 +624,15 @@ static int __init populate_rootfs(void)int fd;printk (KERN_INFO "checking if image is initramfs..." ); err =unpack_to_rootfs ((char *)initrd_start, - initrd_end - initrd_start,1 ); + initrd_end - initrd_start);if (!err) {printk (" it is\n" ); -unpack_to_rootfs ((char *)initrd_start, - initrd_end - initrd_start,0 );free_initrd ();return 0 ; + }else { +clean_rootfs (); +unpack_to_rootfs (__initramfs_start, + __initramfs_end - __initramfs_start); }printk ("it isn't (%s); looks like an initrd\n" , err); fd =sys_open ("/initrd.image" ,O_WRONLY |O_CREAT ,0700 );
@@ -604,7 +645,7 @@ static int __init populate_rootfs(void)#else printk (KERN_INFO "Unpacking initramfs..." ); err =unpack_to_rootfs ((char *)initrd_start, - initrd_end - initrd_start,0 ); + initrd_end - initrd_start);if (err)panic (err);printk (" done\n" );
Signature · 9 lines
1.6.0.6 -- Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org