Error: No NAND device found during Reset
Hi,
In U-boot-1.1.6 , when i did reset the NAND device is not found("No NAND device found!!!") , if i Restart the board NAND device is detected . what exactly the problem? any patch for this
board details
MPC8313ERDB board.
u-boot version 1.16
Thanks
Rudresh
Signature · 2 lines
View this message in context: http://www.nabble.com/Error%3A-No-NAND-device-found-during-Reset-tp22577501p22577501.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear rudresh,
Quoted 4 lines · In message <[email protected]> you wrote:
In U-boot-1.1.6 , when i did reset the NAND device is not
found("No NAND device found!!!"), if i Restart the board NAND device is detected . what exactly the problem? any patch for this
U-Boot 1.1.6 is more than 2 years old. Please update to a recent version and try again.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What can it profit a man to gain the whole world and to come to his
property with a gastric ulcer, a blown prostate, and bifocals?
-- John Steinbeck, _Cannery Row_i tried with u-boot 1.3.0 its working fine, but the client required u-boot 1.1.6 version.
Thanks
Rudresh
Quoted 29 lines · wd
Dear rudresh,
Quoted 4 lines · In message <[email protected]> you wrote:
In U-boot-1.1.6 , when i did reset the NAND device is not
found("No NAND device found!!!"), if i Restart the board NAND device is detected . what exactly the problem? any patch for thisU-Boot 1.1.6 is more than 2 years old. Please update to a recent version and try again.
Best regards,
Wolfgang Denk
Signature · 10 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What can it profit a man to gain the whole world and to come to his property with a gastric ulcer, a blown prostate, and bifocals? -- John Steinbeck, _Cannery Row_ _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/Error%3A-No-NAND-device-found-during-Reset-tp22577501p22578494.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear rudresh,
Quoted 3 lines · In message <[email protected]> you wrote:
i tried with u-boot 1.3.0 its working fine, but the client required u-boot 1.1.6 version.
So tell the client that you know how to fix the problem. The fix consists in the update.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de You've no idea of what a poor opinion I have of myself, and how little I deserve it. - W. S. Gilbert
I fix this issue by removing fixup for MPC8313ERDB REVA board in board\mpc8313erdb\mpc8313erdb.c, now its working fine.
int checkboard(void)
{
uint* led_ptr;
volatile immap_t *im = (immap_t *) CFG_IMMR;
puts("Board: Freescale MPC8313ERDB\n");
#if 0
led_ptr = (uint*) (0xFA000000);
/* fixup for MPC8313ERDB REVA board, ORx[FCM_BCTLD] need to be set;
* the default value of CFG_ORi_PRELIM[FCM_BCTLD] is clear
* that is ok for REVA1 and REVA2 board to identify NAND device
* SW4.3[REVA] 0 stands for REVA
* SW4.3[REVA] 1 stands for REVA1/REVA2
*/
if ( (*led_ptr & 0x1) == 0) {
#if defined(CFG_NAND_OR_PRELIM) && defined(CFG_NAND_BR_PRELIM)
#if !defined(CONFIG_NAND_U_BOOT )
im->lbus.bank[1].or = CFG_NAND_OR_PRELIM | OR_FCM_BCTLD;
#else
#warning CONFIG_NAND_U_BOOT will not work on MPC8313ERDB REVA board
#endif
#endif
}
*led_ptr = 0x00000000;
#endif
return 0;
}Thanks
Rudresh Talkad
Quoted 41 lines · rudresh
i tried with u-boot 1.3.0 its working fine, but the client required u-boot 1.1.6 version.
Thanks
RudreshQuoted 30 lines · wd
Dear rudresh,
Quoted 5 lines · In message <[email protected]> you wrote:
In U-boot-1.1.6 , when i did reset the NAND device is not
found("No NAND device found!!!"), if i Restart the board NAND device is detected . what
exactly the problem? any patch for thisU-Boot 1.1.6 is more than 2 years old. Please update to a recent version and try again.
Best regards,
Wolfgang Denk
Signature · 10 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What can it profit a man to gain the whole world and to come to his property with a gastric ulcer, a blown prostate, and bifocals? -- John Steinbeck, _Cannery Row_ _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/Error%3A-No-NAND-device-found-during-Reset-tp22577501p22579613.html Sent from the Uboot - Users mailing list archive at Nabble.com.