Skip to contentSkip to conversation

8xx: add support for new keymile kmsupx4 board.

PATCH New Heiko Schocher 2 participants 2 messages Mar 12, 2009 – Mar 18, 2009

Subsystems (2)

v2 of 3 New Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 6/6 8xx: add support for new keymile kmsupx4 board.

This patch adds support for the kmsupx4 board from Keymile, based on a Freescale MPC852T CPU

- serial console on SMC1
- 32 MB SDRAM
- 32 MB NOR Flash
- Ethernet over SCC3
- I2C Bitbang

---
 MAINTAINERS                   |    1 +
 MAKEALL                       |    1 +
 Makefile                      |    3 ++
 board/keymile/common/common.c |    4 +++
 board/keymile/km8xx/km8xx.c   |    7 +++++-
 drivers/i2c/soft_i2c.c        |    2 +-
 include/configs/km8xx.h       |   46 ++++++++++++++++++++++++++++++++---------
 include/configs/kmsupx4.h     |   41 ++++++++++++++++++++++++++++++++++++
 8 files changed, 93 insertions(+), 12 deletions(-)
 create mode 100644 include/configs/kmsupx4.h
MAINTAINERS +1 -0
index c3157d9..ce25c1b 100644
@@ -380,6 +380,7 @@ Heiko Schocher <[email protected]>
 	ids8247		MPC8247
 	jupiter		MPC5200
 	kmeter1		MPC8360
+	kmsupx4		MPC852T
 	mgcoge		MPC8247
 	mgsuvd		MPC852
 	mucmc52		MPC5200
MAKEALL +1 -0
index f8c912b..ed9e5ed 100755
@@ -117,6 +117,7 @@ LIST_8xx="		\
 	KUP4X		\
 	LANTEC		\
 	lwmon		\
+	kmsupx4		\
 	MBX		\
 	MBX860T		\
 	mgsuvd		\
Makefile +3 -0
index 8cc8dd5..74bde8a 100644
@@ -921,6 +921,9 @@ IVMS8_config:	unconfig
 		 }
 	@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 
+kmsupx4_config:		unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+
 KUP4K_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 
board/keymile/common/common.c +4 -0
index c3fa844..b2bd7fd 100644
@@ -295,11 +295,14 @@ int ivm_analyze_eeprom (unsigned char *buf, int len)
 
 int ivm_read_eeprom (void)
 {
+#if defined(CONFIG_I2C_MUX)
 	I2C_MUX_DEVICE *dev = NULL;
+#endif
 	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
 	uchar	*buf;
 	unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
 
+#if defined(CONFIG_I2C_MUX)
 	/* First init the Bus, select the Bus */
 #if defined(CONFIG_SYS_I2C_IVM_BUS)
 	dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
@@ -313,6 +316,7 @@ int ivm_read_eeprom (void)
 		return -1;
 	}
 	i2c_set_bus_num (dev->busid);
+#endif
 
 	buf = (unsigned char *) getenv ("EEprom_ivm_addr");
 	if (buf != NULL)
board/keymile/km8xx/km8xx.c +6 -1
index e7bfa31..845d3f2 100644
@@ -61,7 +61,12 @@ const uint sdram_table[] =
 
 int checkboard (void)
 {
-	puts ("Board: Keymile mgsuvd");
+	puts ("Board: Keymile ");
+#if defined(CONFIG_KMSUPX4)
+	puts ("kmsupx4");
+#else
+	puts ("mgsuvd");
+#endif
 	if (ethernet_present ())
 		puts (" with PIGGY.");
 	puts ("\n");
drivers/i2c/soft_i2c.c +1 -1
index da6cec1..ed5f5b2 100644
@@ -40,7 +40,7 @@
 #ifdef CONFIG_LPC2292
 #include <asm/arch/hardware.h>
 #endif
-#ifdef	CONFIG_MPC866			/* only valid for MPC866 */
+#if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866)
 #include <asm/io.h>
 #endif
 #include <i2c.h>
include/configs/km8xx.h +36 -10

103 lines not on this page · raw message

include/configs/kmsupx4.h new file +41 -0

41 lines not on this page · raw message

Signature · 5 lines
1.6.0.6

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

PATCH v2 6/6 8xx: add support for new keymile kmsupx4 board.

Dear Heiko Schocher,

Quoted 10 lines · In message <[email protected]> you wrote:

This patch adds support for the kmsupx4 board from Keymile, based on a Freescale MPC852T CPU

- serial console on SMC1
- 32 MB SDRAM
- 32 MB NOR Flash
- Ethernet over SCC3
- I2C Bitbang

Quoted 11 lines
---
 MAINTAINERS                   |    1 +
 MAKEALL                       |    1 +
 Makefile                      |    3 ++
 board/keymile/common/common.c |    4 +++
 board/keymile/km8xx/km8xx.c   |    7 +++++-
 drivers/i2c/soft_i2c.c        |    2 +-
 include/configs/km8xx.h       |   46 ++++++++++++++++++++++++++++++++---------
 include/configs/kmsupx4.h     |   41 ++++++++++++++++++++++++++++++++++++
 8 files changed, 93 insertions(+), 12 deletions(-)
 create mode 100644 include/configs/kmsupx4.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"To IBM, 'open' means there is a modicum  of  interoperability  among
some of their equipment."                            - Harv Masterson