sdp regulator init updates
Subsystems (3)
PATCH 1/1 sdp regulator init updates
From: David Brownell <[email protected]>
Hook up VPLL2 regulator on 3430 SDP. Link that and VDAC to the framebuffer device, supporting eventual conversion to use the regulator framework.
Signed-off-by David Brownell <[email protected]>
---
Try also to merge this into the mainline queue ...
arch/arm/mach-omap2/board-3430sdp.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
arch/arm/mach-omap2/board-3430sdp.c +30 -0
@@ -189,6 +189,8 @@ static int ads7846_vaux_control(int vaux {int ret =0 ; +/* FIXME use regulator calls */ +#ifdef CONFIG_TWL4030_CORE /* check for return value of ldo_use: if success it returns 0 */ if (vaux_cntrl ==VAUX_ENABLE ) {
@@ -245,6 +247,16 @@ static struct platform_device sdp3430_lc .id = -1, }; +static struct regulator_consumer_supply sdp3430_vdac_supply = { + .supply ="vdac" , + .dev = &sdp3430_lcd_device.dev, +}; + +static struct regulator_consumer_supply sdp3430_vdvi_supply = { + .supply ="vdvi" , + .dev = &sdp3430_lcd_device.dev, +}; +static struct platform_device *sdp3430_devices[]__initdata = { &sdp3430_smc91x_device, &sdp3430_lcd_device,
@@ -587,6 +599,23 @@ static struct regulator_init_data sdp343 .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = 1, + .consumer_supplies = &sdp3430_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data sdp3430_vpll2 = { + .constraints = { + .name ="VDVI" , + .min_uV =1800000 , + .max_uV =1800000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &sdp3430_vdvi_supply, }; static struct twl4030_platform_data sdp3430_twldata = {
@@ -609,6 +638,7 @@ static struct twl4030_platform_data sdp3 .vmmc2 = &sdp3430_vmmc2, .vsim = &sdp3430_vsim, .vdac = &sdp3430_vdac, + .vpll2 = &sdp3430_vpll2, };static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
Tony Lindgren
maintainerPATCH 1/1 sdp regulator init updates
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: c274d9729a5862d6641df0260679e27b8915259f
PatchWorks
http://patchwork.kernel.org/patch/13402/