ar9170: update Makefile, Kconfig and MAINTAINERS
PATCH 5/5 ar9170: update Makefile, Kconfig and MAINTAINERS
This patch update all necessary Makefile and Kconfig files.
Now you can then enable ar9170 in the kernel configuration under:
Device Drivers --->
[*] Network device support ---> Wireless LAN ---> [*] Wireless LAN (IEEE 802.11) <M> Atheros AR9170 support <M> Atheros AR9170 USB support
---
John,
This is the last patch of this series. As far as I can _test_, this driver is ready for wireless-testing. I hope you agree, with me. I'll look into Alina's issue, once I've received more information.
Regards,
Chr
---
MAINTAINERS +8 -0
@@ -765,6 +765,14 @@ L: [email protected] L: [email protected] S: Supported +ATHEROS AR9170 WIRELESS DRIVER +P: Christian Lamparter +M: [email protected] +L: [email protected] +W: http://wireless.kernel.org/en/users/Drivers/ar9170 +S: Maintained +F: drivers/net/wireless/ar9170/ + ATI_REMOTE2 DRIVER P: Ville Syrjala M: [email protected]
drivers/net/wireless/Kconfig +1 -0
@@ -485,6 +485,7 @@ config MWL8K source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/ath5k/Kconfig" source "drivers/net/wireless/ath9k/Kconfig" +source "drivers/net/wireless/ar9170/Kconfig" source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig"
drivers/net/wireless/Makefile +1 -0
@@ -57,5 +57,6 @@ obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH5K) += ath5k/ obj-$(CONFIG_ATH9K) += ath9k/ +obj-$(CONFIG_AR9170_COMMON) += ar9170/ obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
drivers/net/wireless/ar9170/Kconfig new file +28 -0
@@ -0,0 +1,28 @@ +config AR9170_COMMON + tristate "Atheros AR9170 support" + depends on WLAN_80211 && MAC80211 && EXPERIMENTAL + help + This is common code for AR9170 based devices. + This module does nothing by itself - the USB/(SPI) frontends + also need to be enabled in order to support any devices. + + Say Y if you have the hardware, or M to build a module called + ar9170common. + +config AR9170_USB + tristate "Atheros AR9170 USB support" + depends on AR9170_COMMON && USB + select FW_LOADER + help + This is a driver for the Atheros "otus" 802.11n USB devices. + + These devices require additional firmware (2 files). + For now, these files can be downloaded from here: + http://wireless.kernel.org/en/users/Drivers/ar9170 + + If you choose to build a module, it'll be called ar9170usb. + +config AR9170_LEDS + bool + depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) + default y
drivers/net/wireless/ar9170/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +ar9170common-objs += main.o cmd.o mac.o phy.o led.o +ar9170usb-objs += usb.o + +obj-$(CONFIG_AR9170_COMMON) += ar9170common.o +obj-$(CONFIG_AR9170_USB) += ar9170usb.o
Johannes Berg
maintainerQuoted 34 lines · Christian Lamparter
drivers/net/wireless/ar9170/Kconfig new file +28
-0+config AR9170_COMMON + tristate "Atheros AR9170 support" + depends on WLAN_80211 && MAC80211 && EXPERIMENTAL + help + This is common code for AR9170 based devices. + This module does nothing by itself - the USB/(SPI) frontends + also need to be enabled in order to support any devices. + + Say Y if you have the hardware, or M to build a module called + ar9170common. + +config AR9170_USB + tristate "Atheros AR9170 USB support" + depends on AR9170_COMMON && USB + select FW_LOADER + help + This is a driver for the Atheros "otus" 802.11n USB devices. + + These devices require additional firmware (2 files). + For now, these files can be downloaded from here: + http://wireless.kernel.org/en/users/Drivers/ar9170 + + If you choose to build a module, it'll be called ar9170usb. + +config AR9170_LEDS + bool + depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) + default ydrivers/net/wireless/ar9170/Makefile new file +0
-0
drivers/net/wireless/ar9170/Makefile line 5
Quoted 5 lines
drivers/net/wireless/ar9170/Makefile new file +5
-0@@ -0,0 +1,5 @@ +ar9170common-objs += main.o cmd.o mac.o phy.o led.o +ar9170usb-objs += usb.o + +obj-$(CONFIG_AR9170_COMMON) += ar9170common.o +obj-$(CONFIG_AR9170_USB) += ar9170usb.o
I think it would make sense to link them into the same module as long as we don't have a second user of the common code. I actually doubt we will see a second user of the common code at all, even if it is in theory possible with the hardware design.
johannes
Quoted 5 lines · On Monday 23 March 2009 15:29:11 Johannes Berg wrote:
I think it would make sense to link them into the same module as long as we don't have a second user of the common code. I actually doubt we will see a second user of the common code at all, even if it is in theory possible with the hardware design.
Shh, there's a secret plan, see ar9170/main.c
/*
* BIG FAT TODO:
*
* By the looks of things: these devices share a lot of things like
* EEPROM layout/design and PHY code with other Atheros WIFI products.
* So this driver/library will eventually become ath9k code... or vice versa ;-) */
And the ath5k<->ath9k merge could provide some "helper" function for this driver as well... (wishful thinking, but anyway...)
Meanwhile, what about a config option that can be enabled to integrate everything into the front-end module (ar9170usb)? ( However, I don't think this config solution will stand a chance ;-)
and we all come to the same "all-in-one works best" conclusion. )
---
drivers/net/wireless/ar9170/Kconfig +10 -0
@@ -22,6 +22,16 @@ config AR9170_USB If you choose to build a module, it'll be called ar9170usb. +config AR9170_INTEGRATE_COMMON + bool "Integrate common code into front-end modules" + depends on AR9170_COMMON + help + If this option is set, the common code will be + integrated into the front-end modules instead + of being linked into a seperate module. + + If unsure, say N. + config AR9170_LEDS bool depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON)
drivers/net/wireless/ar9170/Makefile +10 -0
@@ -1,5 +1,15 @@ +ifdef CONFIG_AR9170_INTEGRATE_COMMON + +ar9170usb-objs += usb.o main.o cmd.o mac.o phy.o led.o + +obj-$(CONFIG_AR9170_USB) += ar9170usb.o + +else + ar9170common-objs += main.o cmd.o mac.o phy.o led.o ar9170usb-objs += usb.o obj-$(CONFIG_AR9170_COMMON) += ar9170common.o obj-$(CONFIG_AR9170_USB) += ar9170usb.o + +endif
drivers/net/wireless/ar9170/main.c +4 -0
@@ -57,8 +57,10 @@ static int modparam_nohwcrypt;module_param_named (nohwcrypt, modparam_nohwcrypt, bool,S_IRUGO );MODULE_PARM_DESC (nohwcrypt,"Disable hardware encryption." );MODULE_AUTHOR ("Johannes Berg <[email protected]>" ); +#ifndef CONFIG_AR9170_INTEGRATE_COMMON MODULE_LICENSE ("GPL" );MODULE_DESCRIPTION ("Atheros shared code for AR9170 wireless devices" ); +#endif /* CONFIG_AR9170_INTEGRATE_COMMON */ #define RATE (_bitrate, _hw_rate, _txpidx, _flags) { \ .bitrate = (_bitrate), \
@@ -1693,6 +1695,7 @@ void ar9170_unregister(struct ar9170 *ar) }EXPORT_SYMBOL_GPL (ar9170_unregister); +#ifndef CONFIG_AR9170_INTEGRATE_COMMON static int __init ar9170_init (void ) {if (modparam_nohwcrypt)
@@ -1709,3 +1712,4 @@ static void __exit ar9170_exit(void)module_init (ar9170_init);module_exit (ar9170_exit); +#endif /* CONFIG_AR9170_INTEGRATE_COMMON */
Quoted 8 lines · Christian Lamparter
Quoted 5 lines · On Monday 23 March 2009 15:29:11 Johannes Berg wrote:
I think it would make sense to link them into the same module as long as we don't have a second user of the common code. I actually doubt we will see a second user of the common code at all, even if it is in theory possible with the hardware design.
Shh, there's a secret plan, see
ar9170/main.c
Quoted 7 lines
/*
* BIG FAT TODO:
*
* By the looks of things: these devices share a lot of things like
* EEPROM layout/design and PHY code with other Atheros WIFI products.
* So this driver/library will eventually become ath9k code... or vice versa ;-) */
The MACs are completely different so if there is some code sharing possible it may be difficult to find but it would certainly be welcomed!
Quoted 2 lines
And the ath5k<->ath9k merge could provide some "helper" function for this driver as well... (wishful thinking, but anyway...)
Yeah we'll see.
Quoted 4 lines
Meanwhile, what about a config option that can be enabled to integrate everything into the front-end module (ar9170usb)? ( However, I don't think this config solution will stand a chance ;-)
and we all come to the same "all-in-one works best" conclusion. )
Future Atheros 11n USB devices will use a different MAC and therefore expect them to be different. I am not sure if in the future we can share but I won't know for sure for a little while.
Its your driver though so your call. I also just don't see where things can be immediately shared right now but do welcome the work to do so.
Luis
Johannes Berg
maintainerQuoted 10 lines · Christian Lamparter
Shh, there's a secret plan, see
ar9170/main.c/*
* BIG FAT TODO:
*
* By the looks of things: these devices share a lot of things like
* EEPROM layout/design and PHY code with other Atheros WIFI products.
* So this driver/library will eventually become ath9k code... or vice versa ;-) */
Quoted 2 lines
And the ath5k<->ath9k merge could provide some "helper" function for this driver as well... (wishful thinking, but anyway...)
_Very_ wishful thinking -- only very small parts of the design are really shared, the PHY stuff, which happens to be relevant to the eeprom.
Quoted 4 lines
Meanwhile, what about a config option that can be enabled to integrate everything into the front-end module (ar9170usb)? ( However, I don't think this config solution will stand a chance ;-)
and we all come to the same "all-in-one works best" conclusion. )
This seems like a pointless option. Why not just change the Kconfig file to remove the common option and link both files into one binary, removing all EXPORT_SYMBOLs?
johannes
PATCH 1/1 ar9170: single module build
This patch restores all-in-one module build procedure for ar9170.
---
Quoted 6 lines · On Tuesday 24 March 2009 08:41:01 Johannes Berg wrote:
Quoted 2 lines
And the ath5k<->ath9k merge could provide some "helper" function for this driver as well... (wishful thinking, but anyway...)
_Very_ wishful thinking -- only very small parts of the design are really shared, the PHY stuff, which happens to be relevant to the eeprom.
small? regd.c, eeprom.c, ani.c, calib.c, phy.c (including some register definitions) and code for LED/Bluetooth Coex?/Rfkill?
that's nearly a third of ath9k. However: Agreed!
Lets wait and see what Atheros' is doing/planing.
Quoted 7 lines
Quoted 4 lines
Meanwhile, what about a config option that can be enabled to integrate everything into the front-end module (ar9170usb)? ( However, I don't think this config solution will stand a chance ;-)
and we all come to the same "all-in-one works best" conclusion. )This seems like a pointless option. Why not just change the
Kconfigfile to remove the common option and link both files into one binary, removing allEXPORT_SYMBOLs?
Done!
---
Quoted 2 lines · On Tuesday 24 March 2009 00:35:22 Luis R. Rodriguez wrote:
The MACs are completely different so if there is some code sharing possible it may be difficult to find but it would certainly be welcomed!
MAC with its firmware is a zd12xx derivate, true... the PHY chips are AR9101/AR9102/AR9104, right?
Quoted 3 lines
Future Atheros 11n USB devices will use a different MAC and therefore expect them to be different. I am not sure if in the future we can share but I won't know for sure for a little while.
That's really good to hear!
---
drivers/net/wireless/Makefile +1 -1
@@ -57,6 +57,6 @@ obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH5K) += ath5k/ obj-$(CONFIG_ATH9K) += ath9k/ -obj-$(CONFIG_AR9170_COMMON) += ar9170/ +obj-$(CONFIG_AR9170_USB) += ar9170/ obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
drivers/net/wireless/ar9170/Kconfig +3 -14
@@ -1,17 +1,6 @@ -config AR9170_COMMON - tristate "Atheros AR9170 support" - depends on WLAN_80211 && MAC80211 && EXPERIMENTAL - help - This is common code for AR9170 based devices. - This module does nothing by itself - the USB/(SPI) frontends - also need to be enabled in order to support any devices. - - Say Y if you have the hardware, or M to build a module called - ar9170common. - config AR9170_USB - tristate "Atheros AR9170 USB support" - depends on AR9170_COMMON && USB + tristate "Atheros AR9170 802.11n USB support" + depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER help This is a driver for the Atheros "otus" 802.11n USB devices.
@@ -24,5 +13,5 @@ config AR9170_USB config AR9170_LEDS bool - depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON) + depends on AR9170_USB && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_USB) default y
drivers/net/wireless/ar9170/Makefile +1 -3
@@ -1,5 +1,3 @@ -ar9170common-objs += main.o cmd.o mac.o phy.o led.o -ar9170usb-objs += usb.o +ar9170usb-objs := usb.o main.o cmd.o mac.o phy.o led.o -obj-$(CONFIG_AR9170_COMMON) += ar9170common.o obj-$(CONFIG_AR9170_USB) += ar9170usb.o
drivers/net/wireless/ar9170/cmd.c +0 -1
@@ -127,4 +127,3 @@ int ar9170_echo_test(struct ar9170 *ar, u32 v)return 0 ; } -EXPORT_SYMBOL_GPL (ar9170_echo_test);
drivers/net/wireless/ar9170/main.c +0 -40
@@ -37,14 +37,6 @@* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* -* BIG FAT TODO: -* -* By the looks of things: these devices share a lot of things like -* EEPROM layout/design and PHY code with other Atheros WIFI products. -* So this driver/library will eventually become ath9k code... or vice versa ;-) -*/ -#include <linux/init.h> #include <linux/module.h> #include <linux/etherdevice.h>
@@ -56,9 +48,6 @@static int modparam_nohwcrypt;module_param_named (nohwcrypt, modparam_nohwcrypt, bool,S_IRUGO );MODULE_PARM_DESC (nohwcrypt,"Disable hardware encryption." ); -MODULE_AUTHOR ("Johannes Berg <[email protected]>" ); -MODULE_LICENSE ("GPL" ); -MODULE_DESCRIPTION ("Atheros shared code for AR9170 wireless devices" );#define RATE (_bitrate, _hw_rate, _txpidx, _flags) { \ .bitrate = (_bitrate), \
@@ -247,7 +236,6 @@ void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,skb_pull (skb,sizeof (struct ar9170_tx_control ));ieee80211_tx_status_irqsafe (ar->hw, skb); } -EXPORT_SYMBOL_GPL (ar9170_handle_tx_status); static struct sk_buff *ar9170_find_skb_in_queue(struct ar9170 *ar, const u8 *mac,
@@ -630,13 +618,6 @@ static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)ieee80211_rx_irqsafe (ar->hw, skb, &status); } -/* -* TODO: -* It looks like AR9170 supports more than just the USB transport interface. -* Unfortunately, there is no available information what parts of the -* precendent and following code fragments is device specific and what not. -* For now, everything stays here, until some SPI chips pop up. -*/ void ar9170_rx (struct ar9170 *ar,struct sk_buff *skb) {unsigned int i, tlen, resplen;
@@ -694,7 +675,6 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)printk (KERN_ERR "%s: buffer remains!\n" ,wiphy_name (ar->hw->wiphy)); } -EXPORT_SYMBOL_GPL (ar9170_rx);#define AR9170_FILL_QUEUE (queue, ai_fs, cwmin, cwmax, _txop) \ do { \
@@ -1582,7 +1562,6 @@ void *ar9170_alloc(size_t priv_size)return ar; } -EXPORT_SYMBOL_GPL (ar9170_alloc);static int ar9170_read_eeprom (struct ar9170 *ar) {
@@ -1680,7 +1659,6 @@ err_unreg: err_out:return err; } -EXPORT_SYMBOL_GPL (ar9170_register);void ar9170_unregister (struct ar9170 *ar) {
@@ -1691,21 +1669,3 @@ void ar9170_unregister(struct ar9170 *ar)ieee80211_unregister_hw (ar->hw);mutex_destroy (&ar->mutex); } -EXPORT_SYMBOL_GPL (ar9170_unregister); - -static int __init ar9170_init (void ) -{ -if (modparam_nohwcrypt) -printk (KERN_INFO "ar9170: cryptographic acceleration " -"disabled.\n" ); - -return 0 ; -} - -static void __exit ar9170_exit(void) -{ - -} - -module_init (ar9170_init); -module_exit (ar9170_exit);
drivers/net/wireless/ar9170/usb.c +2 -1
@@ -47,9 +47,10 @@#include "hw.h" #include "usb.h" +MODULE_AUTHOR ("Johannes Berg <[email protected]>" );MODULE_AUTHOR ("Christian Lamparter <[email protected]>" );MODULE_LICENSE ("GPL" ); -MODULE_DESCRIPTION ("USB Driver for Atheros AR9170 based devices" ); +MODULE_DESCRIPTION ("Atheros AR9170 802.11n USB wireless" );MODULE_FIRMWARE ("ar9170-1.fw" );MODULE_FIRMWARE ("ar9170-2.fw" );