OMAP3: MMC needs CONFIG_REGULATOR{,_TWL4030} now in defconfigs
PATCH 1/1 OMAP3: MMC needs CONFIG_REGULATOR{,_TWL4030} now in defconfigs
MMC doesn't work after 3fe326511c66ab842ef0a09a1f4c564b1a8beecf unless CONFIG_REGULATOR, CONFIG_REGULATOR_TWL4030 are present in the .config. Add those in for all OMAP3 defconfigs. Tested on BeagleBoard, but this is presumably needed for anything with MMC and TWL4030.
--- arch/arm/configs/omap3_beagle_defconfig | 3 ++- arch/arm/configs/omap3_evm_defconfig | 3 ++- arch/arm/configs/omap3_pandora_defconfig | 3 ++- arch/arm/configs/omap_3430sdp_defconfig | 3 ++- arch/arm/configs/omap_ldp_defconfig | 3 ++- arch/arm/configs/overo_defconfig | 2 ++ 6 files changed, 12 insertions(+), 5 deletions(-)
arch/arm/configs/omap3_beagle_defconfig +2 -1
@@ -1040,10 +1040,11 @@ CONFIG_RTC_DRV_TWL4030=y # # Voltage and Current regulators # -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set #
arch/arm/configs/omap3_evm_defconfig +2 -1
@@ -1098,10 +1098,11 @@ CONFIG_RTC_LIB=y # # Voltage and Current regulators # -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set #
arch/arm/configs/omap3_pandora_defconfig +2 -1
@@ -1156,10 +1156,11 @@ CONFIG_RTC_DRV_TWL4030=y # # Voltage and Current regulators # -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set #
arch/arm/configs/omap_3430sdp_defconfig +2 -1
@@ -1165,10 +1165,11 @@ CONFIG_RTC_DRV_TWL4030=y # # Voltage and Current regulators # -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set #
arch/arm/configs/omap_ldp_defconfig +2 -1
@@ -1104,10 +1104,11 @@ CONFIG_RTC_DRV_TWL4030=y # # Voltage and Current regulators # -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set #
arch/arm/configs/overo_defconfig +2 -0
@@ -1601,9 +1601,11 @@ CONFIG_RTC_DRV_TWL4030=y # Voltage and Current regulators # # CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set #
Quoted 7 lines · Paul Walmsley
MMC doesn't work after
3fe326511c66ab842ef0a09a1f4c564b1a8beecfunlessCONFIG_REGULATOR,CONFIG_REGULATOR_TWL4030are present in the .config. Add those in for all OMAP3 defconfigs. Tested on BeagleBoard, but this is presumably needed for anything with MMC and TWL4030.Signed-off-by Paul Walmsley <[email protected]>Cc David Brownell <[email protected]>
I seem to have given up on updating defconfigs, but that doesn't mean it's not a good thing to do!
Same thing with twl4030 GPIO support, on most of those platforms.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 1/1 OMAP3: MMC needs CONFIG_REGULATOR{,_TWL4030} now in
In reply to Paul WalmsleyThis patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: 7b2a455b3167755686e048c193911591c9966418
PatchWorks
http://patchwork.kernel.org/patch/14147/