Skip to contentSkip to conversation

libata updates

PATCH New Jeff Garzik 1 participant 1 message Mar 25, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libata updates

No major 2.6.29 fixes have cropped up so far, since release.

Summary, nothing highly notable:
- sata_mv: large update, include ATAPI support (previously thought impossible)
- core updates from Alan that should help with error handling on SFF hardware
- large "magic number" -> "named constant" cleanup
- other minor updates, see shortlog below

Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ahci.c              |   31 +-
 drivers/ata/ata_generic.c       |    4 +-
 drivers/ata/ata_piix.c          |   60 ++--
 drivers/ata/libata-core.c       |   14 +-
 drivers/ata/libata-eh.c         |   19 +-
 drivers/ata/libata-sff.c        |   91 ++++-
 drivers/ata/libata.h            |    2 -
 drivers/ata/pata_acpi.c         |    6 +-
 drivers/ata/pata_ali.c          |   28 +-
 drivers/ata/pata_amd.c          |   70 ++--
 drivers/ata/pata_artop.c        |   49 ++-
 drivers/ata/pata_at32.c         |    4 +-
 drivers/ata/pata_atiixp.c       |    6 +-
 drivers/ata/pata_bf54x.c        |    2 +-
 drivers/ata/pata_cmd640.c       |    2 +-
 drivers/ata/pata_cmd64x.c       |   24 +-
 drivers/ata/pata_cs5520.c       |    2 +-
 drivers/ata/pata_cs5530.c       |    8 +-
 drivers/ata/pata_cs5535.c       |    4 +-
 drivers/ata/pata_cs5536.c       |    4 +-
 drivers/ata/pata_cypress.c      |    4 +-
 drivers/ata/pata_efar.c         |    6 +-
 drivers/ata/pata_hpt366.c       |    4 +-
 drivers/ata/pata_hpt37x.c       |   28 +-
 drivers/ata/pata_hpt3x2n.c      |    4 +-
 drivers/ata/pata_hpt3x3.c       |    6 +-
 drivers/ata/pata_icside.c       |    4 +-
 drivers/ata/pata_isapnp.c       |   14 +-
 drivers/ata/pata_it8213.c       |    4 +-
 drivers/ata/pata_it821x.c       |   16 +-
 drivers/ata/pata_ixp4xx_cf.c    |    2 +-
 drivers/ata/pata_jmicron.c      |    4 +-
 drivers/ata/pata_legacy.c       |    2 +-
 drivers/ata/pata_marvell.c      |    8 +-
 drivers/ata/pata_mpc52xx.c      |    4 +-
 drivers/ata/pata_mpiix.c        |    2 +-
 drivers/ata/pata_netcell.c      |    4 +-
 drivers/ata/pata_ninja32.c      |    2 +-
 drivers/ata/pata_ns87410.c      |    2 +-
 drivers/ata/pata_ns87415.c      |    8 +-
 drivers/ata/pata_octeon_cf.c    |    4 +-
 drivers/ata/pata_oldpiix.c      |    4 +-
 drivers/ata/pata_opti.c         |    2 +-
 drivers/ata/pata_optidma.c      |   10 +-
 drivers/ata/pata_pcmcia.c       |   36 ++-
 drivers/ata/pata_pdc2027x.c     |   12 +-
 drivers/ata/pata_pdc202xx_old.c |   12 +-
 drivers/ata/pata_qdi.c          |    4 +-
 drivers/ata/pata_radisys.c      |    6 +-
 drivers/ata/pata_rb532_cf.c     |   64 +---
 drivers/ata/pata_rz1000.c       |    2 +-
 drivers/ata/pata_sc1200.c       |   35 ++-
 drivers/ata/pata_scc.c          |    4 +-
 drivers/ata/pata_sch.c          |    6 +-
 drivers/ata/pata_serverworks.c  |   20 +-
 drivers/ata/pata_sil680.c       |    8 +-
 drivers/ata/pata_sis.c          |   32 +-
 drivers/ata/pata_sl82c105.c     |    6 +-
 drivers/ata/pata_triflex.c      |    4 +-
 drivers/ata/pata_via.c          |   24 +-
 drivers/ata/pata_winbond.c      |    2 +-
 drivers/ata/pdc_adma.c          |    4 +-
 drivers/ata/sata_fsl.c          |    4 +-
 drivers/ata/sata_inic162x.c     |    4 +-
 drivers/ata/sata_mv.c           |  868 +++++++++++++++++++++++++++++++++------
 drivers/ata/sata_nv.c           |    7 +-
 drivers/ata/sata_promise.c      |   30 +-
 drivers/ata/sata_qstor.c        |    3 +-
 drivers/ata/sata_sil.c          |   16 +-
 drivers/ata/sata_sil24.c        |   18 +-
 drivers/ata/sata_sis.c          |    4 +-
 drivers/ata/sata_svw.c          |   16 +-
 drivers/ata/sata_sx4.c          |    4 +-
 drivers/ata/sata_uli.c          |    2 +-
 drivers/ata/sata_via.c          |   16 +-
 drivers/ata/sata_vsc.c          |    7 +-
 include/linux/ata.h             |    6 +
 include/linux/libata.h          |    8 +
 78 files changed, 1330 insertions(+), 542 deletions(-)

Alan Cox (4):
pata_artop: Serializing support
pata_sc1200: Activate secondary channel
[libata] Drain data on errors
[libata] Improve timeout handling

David Milburn (1):
[libata] ahci: correct enclosure LED state save

Erik Inge Bolsø (4):
include/linux/ata.h: add some more transfer masks [libata] convert drivers to use ata.h mode mask defines
pata_radisys: fix mwdma_mask to exclude mwdma0
pata_efar: fix *dma_mask

Florian Fainelli (1):
pata-rb532-cf: platform_get_irq() fix ignored failure

Maciej Rutecki (1):
ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off

Mark Lord (19):
sata_mv: cleanup chipset GENeration FLAGS
sata_mv: rearrange mv_start_dma() and friends
sata_mv: restructure mv_qc_issue
sata_mv: update ata_qc_from_tag
sata_mv: mv_fill_sg fixes v2
sata_mv: introduce support for ATAPI devices
sata_mv: optimize use of mv_edma_cfg
sata_mv: remove leftovers
[libata] sata_mv: cache frequently-accessed registers [libata] sata_mv: Enable use of (basic) DMA for ATAPI on GEN_IIE chips [libata] sata_mv: Tighten up interrupt masking in mv_qc_issue() [libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv. [libata] Export ata_pio_queue_task() so that it can be used from sata_mv. [libata] sata_mv: Implement direct FIS transmission via mv_qc_issue_fis().
sata_mv: cosmetic preparations for IRQ coalescing
sata_mv: implement IRQ coalescing (v2)
sata_mv: optimize IRQ coalescing for 8-port chips
sata_mv: fix LED blinking for SoC+NCQ
[libata] More robust parsing for IDENTIFY DEVICE multi_count field

Phil Sutter (4):

      pata-rb532-cf: replace rb532_pata_finish_io()
      pata-rb532-cf: use ata_sff_exec_command()
      pata-rb532-cf: use ata_sff_data_xfer32()
      pata-rb532-cf: drop custom freeze and thaw

Tejun Heo (1):
ahci: drop intx manipulation on msi enable

drivers/ata/ahci.c +20 -11
index 66e012c..788bba2 100644
@@ -404,7 +404,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -412,7 +412,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
 	},
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_IRQ_IF_ERR),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -430,7 +430,7 @@ static const struct ata_port_info ahci_port_info[] = {
 				 AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
 				 AHCI_HFLAG_SECT255),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_sb600_ops,
 	},
@@ -440,7 +440,7 @@ static const struct ata_port_info ahci_port_info[] = {
 				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -448,7 +448,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_sb600_ops,
 	},
@@ -456,7 +456,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_YES_NCQ),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -464,7 +464,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -1348,7 +1348,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	writel(message[1], mmio + hpriv->em_loc+4);
 
 	/* save off new led state for port/slot */
-	emp->led_state = message[1];
+	emp->led_state = state;
 
 	/*
 	 * tell hardware to transmit the message
@@ -2565,6 +2565,15 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
 			/* PCI slot number of the controller */
 			.driver_data = (void *)0x1FUL,
 		},
+		{
+			.ident = "HP Compaq 6720s",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
 
 		{ }	/* terminate list */
 	};
@@ -2647,8 +2656,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
 		hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
 
-	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
-		pci_intx(pdev, 1);
+	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
+		pci_enable_msi(pdev);
 
 	/* save initial config */
 	ahci_save_initial_config(pdev, hpriv);
drivers/ata/ata_generic.c +2 -2
index dc48a63..ecfd22b 100644
@@ -118,8 +118,8 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	u16 command;
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &generic_port_ops
 	};
drivers/ata/ata_piix.c +30 -30

138 lines not on this page · raw message

drivers/ata/libata-core.c +12 -2
index 060bcd6..e7ea77c 100644
@@ -57,6 +57,7 @@
 #include <linux/scatterlist.h>
 #include <linux/io.h>
 #include <linux/async.h>
+#include <linux/log2.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -2389,6 +2390,7 @@ int ata_dev_configure(struct ata_device *dev)
 	dev->cylinders = 0;
 	dev->heads = 0;
 	dev->sectors = 0;
+	dev->multi_count = 0;
 
 	/*
 	 * common ATA, ATAPI feature tests
@@ -2426,8 +2428,15 @@ int ata_dev_configure(struct ata_device *dev)
 
 		dev->n_sectors = ata_id_n_sectors(id);
 
-		if (dev->id[59] & 0x100)
-			dev->multi_count = dev->id[59] & 0xff;
+		/* get current R/W Multiple count setting */
+		if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
+			unsigned int max = dev->id[47] & 0xff;
+			unsigned int cnt = dev->id[59] & 0xff;
+			/* only recognize/allow powers of two here */
+			if (is_power_of_2(max) && is_power_of_2(cnt))
+				if (cnt <= max)
+					dev->multi_count = cnt;
+		}
 
 		if (ata_id_has_lba(id)) {
 			const char *lba_desc;
@@ -6709,6 +6718,7 @@ EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
+EXPORT_SYMBOL_GPL(ata_pio_queue_task);
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
 EXPORT_SYMBOL_GPL(ata_timing_find_mode);
 EXPORT_SYMBOL_GPL(ata_timing_compute);
drivers/ata/libata-eh.c +17 -2
index ea89091..0183131 100644
@@ -547,7 +547,7 @@ void ata_scsi_error(struct Scsi_Host *host)
 
 	/* For new EH, all qcs are finished in one of three ways -
 	 * normal completion, error completion, and SCSI timeout.
-	 * Both cmpletions can race against SCSI timeout.  When normal
+	 * Both completions can race against SCSI timeout.  When normal
 	 * completion wins, the qc never reaches EH.  When error
 	 * completion wins, the qc has ATA_QCFLAG_FAILED set.
 	 *
@@ -562,7 +562,19 @@ void ata_scsi_error(struct Scsi_Host *host)
 		int nr_timedout = 0;
 
 		spin_lock_irqsave(ap->lock, flags);
-
+		
+		/* This must occur under the ap->lock as we don't want
+		   a polled recovery to race the real interrupt handler
+		   
+		   The lost_interrupt handler checks for any completed but
+		   non-notified command and completes much like an IRQ handler.
+		   
+		   We then fall into the error recovery code which will treat
+		   this as if normal completion won the race */
+
+		if (ap->ops->lost_interrupt)
+			ap->ops->lost_interrupt(ap);
+			
 		list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) {
 			struct ata_queued_cmd *qc;
 
@@ -606,6 +618,9 @@ void ata_scsi_error(struct Scsi_Host *host)
 		ap->eh_tries = ATA_EH_MAX_TRIES;
 	} else
 		spin_unlock_wait(ap->lock);
+		
+	/* If we timed raced normal completion and there is nothing to
+	   recover nr_timedout == 0 why exactly are we doing error recovery ? */
 
  repeat:
 	/* invoke error handler */
drivers/ata/libata-sff.c +88 -3

136 lines not on this page · raw message

drivers/ata/libata.h +0 -2
index cea8014..89a1e00 100644
@@ -79,8 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
 extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_pio_queue_task(struct ata_port *ap, void *data,
-			       unsigned long delay);
 extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
drivers/ata/pata_acpi.c +3 -3
index 8b77a98..d8f35fe 100644
@@ -246,9 +246,9 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
-		.udma_mask 	= 0x7f,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA6,
 
 		.port_ops	= &pacpi_ops,
 	};
drivers/ata/pata_ali.c +14 -14
index eb99dbe..751b7ea 100644
@@ -492,53 +492,53 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_early = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &ali_early_port_ops
 	};
 	/* Revision 0x20 added DMA */
 	static const struct ata_port_info info_20 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &ali_20_port_ops
 	};
 	/* Revision 0x20 with support logic added UDMA */
 	static const struct ata_port_info info_20_udma = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,	/* UDMA33 */
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &ali_20_port_ops
 	};
 	/* Revision 0xC2 adds UDMA66 */
 	static const struct ata_port_info info_c2 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC3 is UDMA66 for now */
 	static const struct ata_port_info info_c3 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC4 is UDMA100 */
 	static const struct ata_port_info info_c4 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &ali_c4_port_ops
 	};
 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
 	static const struct ata_port_info info_c5 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &ali_c5_port_ops
 	};
drivers/ata/pata_amd.c +35 -35

109 lines not on this page · raw message

drivers/ata/pata_artop.c +35 -14

102 lines not on this page · raw message

drivers/ata/pata_at32.c +3 -1
index ab61095..5c129f9 100644
@@ -67,7 +67,9 @@
  *
  * Alter PIO_MASK below according to table to set maximal PIO mode.
  */
-#define PIO_MASK (0x1f)
+enum {
+  PIO_MASK = ATA_PIO4,
+};
 
 /*
  * Struct containing private information about device.
drivers/ata/pata_atiixp.c +3 -3
index 506adde..bec0b8a 100644
@@ -220,9 +220,9 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x06,	/* No MWDMA0 support */
-		.udma_mask = 0x3F,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA12_ONLY,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &atiixp_port_ops
 	};
 	static const struct pci_bits atiixp_enable_bits[] = {
drivers/ata/pata_bf54x.c +1 -1
index 1050fed..c4b47a3 100644
@@ -1502,7 +1502,7 @@ static struct ata_port_info bfin_port_info[] = {
 		.flags		= ATA_FLAG_SLAVE_POSS
 				| ATA_FLAG_MMIO
 				| ATA_FLAG_NO_LEGACY,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= 0,
 		.udma_mask	= 0,
 		.port_ops	= &bfin_pata_ops,
drivers/ata/pata_cmd640.c +1 -1
index 34a3942..5acf9fa 100644
@@ -211,7 +211,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &cmd640_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_cmd64x.c +12 -12
index 3167d8f..f98dffe 100644
@@ -299,40 +299,40 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct ata_port_info cmd_info[6] = {
 		{	/* CMD 643 - no UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with broken UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with working UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 rev 1  */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.port_ops = &cmd646r1_port_ops
 		},
 		{	/* CMD 648 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &cmd648_port_ops
 		},
 		{	/* CMD 649 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA5,
 			.port_ops = &cmd648_port_ops
 		}
drivers/ata/pata_cs5520.c +1 -1
index 1186bcd..db6a969 100644
@@ -158,7 +158,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 	static const unsigned int ctl_port[] = { 0x3F6, 0x376 };
 	struct ata_port_info pi = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,
+		.pio_mask	= ATA_PIO4,
 		.port_ops	= &cs5520_port_ops,
 	};
 	const struct ata_port_info *ppi[2];
drivers/ata/pata_cs5530.c +4 -4
index bba4533..c974b05 100644
@@ -298,15 +298,15 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &cs5530_port_ops
 	};
 	/* The docking connector doesn't do UDMA, and it seems not MWDMA */
 	static const struct ata_port_info info_palmax_secondary = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &cs5530_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_cs5535.c +2 -2
index 8b236af..d33aa28 100644
@@ -181,8 +181,8 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &cs5535_port_ops
 	};
drivers/ata/pata_cs5536.c +2 -2
index afed929..6da4cb4 100644
@@ -241,8 +241,8 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &cs5536_port_ops,
 	};
drivers/ata/pata_cypress.c +2 -2
index d546425..8fb040b 100644
@@ -124,8 +124,8 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &cy82c693_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
drivers/ata/pata_efar.c +3 -3
index ac6392e..2085e0a 100644
@@ -251,9 +251,9 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma1-2 */
-		.udma_mask 	= 0x0f, /* UDMA 66 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA4,
 		.port_ops	= &efar_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_hpt366.c +2 -2
index 65c28e5..d7f2da1 100644
@@ -336,8 +336,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_hpt366 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &hpt366_port_ops
 	};
drivers/ata/pata_hpt37x.c +14 -14
index 4216399..81ab570 100644
@@ -753,55 +753,55 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370_port_ops
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370a_port_ops
 	};
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370_33 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370_port_ops
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a_33 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370a_port_ops
 	};
 	/* HPT371, 372 and friends - UDMA133 */
 	static const struct ata_port_info info_hpt372 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt372_port_ops
 	};
 	/* HPT374 - UDMA100, function 1 uses different prereset method */
 	static const struct ata_port_info info_hpt374_fn0 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt372_port_ops
 	};
 	static const struct ata_port_info info_hpt374_fn1 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt374_fn1_port_ops
 	};
drivers/ata/pata_hpt3x2n.c +2 -2
index d5c9fd7..3d59fe0 100644
@@ -441,8 +441,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT372N and friends - UDMA133 */
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt3x2n_port_ops
 	};
drivers/ata/pata_hpt3x3.c +3 -3
index f19cc64..7e31025 100644
@@ -188,11 +188,11 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
 		/* Further debug needed */
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 #endif
 		.port_ops = &hpt3x3_port_ops
 	};
drivers/ata/pata_icside.c +2 -2
index cf9e984..e7347db 100644
@@ -297,7 +297,7 @@ static int icside_dma_init(struct pata_icside_info *info)
 
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
 		state->dma = ec->dma;
-		info->mwdma_mask = 0x07;	/* MW0..2 */
+		info->mwdma_mask = ATA_MWDMA2;
 	}
 
 	return 0;
@@ -473,7 +473,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
 	for (i = 0; i < info->nr_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		ap->pio_mask = 0x1f;
+		ap->pio_mask = ATA_PIO4;
 		ap->mwdma_mask = info->mwdma_mask;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ops = &pata_icside_port_ops;
drivers/ata/pata_isapnp.c +11 -3
index 15cdb91..4bceb88 100644
@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.5"
 
 static struct scsi_host_template isapnp_sht = {
 	ATA_PIO_SHT(DRV_NAME),
@@ -28,6 +28,13 @@ static struct ata_port_operations isapnp_port_ops = {
 	.cable_detect	= ata_cable_40wire,
 };
 
+static struct ata_port_operations isapnp_noalt_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.cable_detect	= ata_cable_40wire,
+	/* No altstatus so we don't want to use the lost interrupt poll */
+	.lost_interrupt = ATA_OP_NULL,
+};
+
 /**
  *	isapnp_init_one		-	attach an isapnp interface
  *	@idev: PnP device
@@ -65,8 +72,8 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 
 	ap = host->ports[0];
 
-	ap->ops = &isapnp_port_ops;
-	ap->pio_mask = 1;
+	ap->ops = &isapnp_noalt_port_ops;
+	ap->pio_mask = ATA_PIO0;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	ap->ioaddr.cmd_addr = cmd_addr;
@@ -76,6 +83,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 					   pnp_port_start(idev, 1), 1);
 		ap->ioaddr.altstatus_addr = ctl_addr;
 		ap->ioaddr.ctl_addr = ctl_addr;
+		ap->ops = &isapnp_port_ops;
 	}
 
 	ata_sff_std_ports(&ap->ioaddr);
drivers/ata/pata_it8213.c +2 -2
index c113d7c..f156da8 100644
@@ -262,8 +262,8 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
 		.port_ops	= &it8213_ops,
 	};
drivers/ata/pata_it821x.c +8 -8
index b05b86a..188bc2f 100644
@@ -875,29 +875,29 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	static const struct ata_port_info info_smart = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_passthru_port_ops
 	};
 	static const struct ata_port_info info_rdc = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_rdc_port_ops
 	};
 	static const struct ata_port_info info_rdc_11 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		/* No UDMA */
 		.port_ops = &it821x_rdc_port_ops
 	};
drivers/ata/pata_ixp4xx_cf.c +1 -1
index b173c15..19fdecf 100644
@@ -176,7 +176,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	ap = host->ports[0];
 
 	ap->ops	= &ixp4xx_port_ops;
-	ap->pio_mask = 0x1f; /* PIO4 */
+	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
 	ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
drivers/ata/pata_jmicron.c +2 -2
index 38cf1ab..3a1474a 100644
@@ -136,8 +136,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	static const struct ata_port_info info = {
 		.flags	= ATA_FLAG_SLAVE_POSS,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5,
 
 		.port_ops	= &jmicron_ops,
drivers/ata/pata_legacy.c +1 -1
index e3bc1b4..3f830f0 100644
@@ -129,7 +129,7 @@ static int qdi;			/* Set to probe QDI controllers */
 static int winbond;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
 static int autospeed;		/* Chip present which snoops speed changes */
-static int pio_mask = 0x1F;	/* PIO range for autospeed devices */
+static int pio_mask = ATA_PIO4;	/* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;	/* Use iordy if available */
 
 /**
drivers/ata/pata_marvell.c +4 -4
index 76e399b..2096fb7 100644
@@ -126,8 +126,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5,
 
 		.port_ops	= &marvell_ops,
@@ -136,8 +136,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 		/* Slave possible as its magically mapped not real */
 		.flags		= ATA_FLAG_SLAVE_POSS,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA6,
 
 		.port_ops	= &marvell_ops,
drivers/ata/pata_mpc52xx.c +2 -2
index 50ae6d1..68d27bc 100644
@@ -737,10 +737,10 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
 	 */
 	prop = of_get_property(op->node, "mwdma-mode", &proplen);
 	if ((prop) && (proplen >= 4))
-		mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1);
+		mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1);
 	prop = of_get_property(op->node, "udma-mode", &proplen);
 	if ((prop) && (proplen >= 4))
-		udma_mask = 0x7 & ((1 << (*prop + 1)) - 1);
+		udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1);
 
 	ata_irq = irq_of_parse_and_map(op->node, 0);
 	if (ata_irq == NO_IRQ) {
drivers/ata/pata_mpiix.c +1 -1
index aa576ca..b21f002 100644
@@ -200,7 +200,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	   the MPIIX your box goes castors up */
 
 	ap->ops = &mpiix_port_ops;
-	ap->pio_mask = 0x1F;
+	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	ap->ioaddr.cmd_addr = cmd_addr;
drivers/ata/pata_netcell.c +2 -2
index 9dc05e1..bdb2369 100644
@@ -51,8 +51,8 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		/* Actually we don't really care about these as the
 		   firmware deals with it */
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5, /* UDMA 133 */
 		.port_ops	= &netcell_ops,
 	};
drivers/ata/pata_ninja32.c +1 -1
index 4dd9a3b..0fb6b1b 100644
@@ -136,7 +136,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!base)
 		return -ENOMEM;
 	ap->ops = &ninja32_port_ops;
-	ap->pio_mask = 0x1F;
+	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	ap->ioaddr.cmd_addr = base + 0x10;
drivers/ata/pata_ns87410.c +1 -1
index 40d411c..ca53fac 100644
@@ -144,7 +144,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x0F,
+		.pio_mask = ATA_PIO3,
 		.port_ops = &ns87410_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_ns87415.c +4 -4
index 89bf5f8..773b159 100644
@@ -346,8 +346,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.port_ops	= &ns87415_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
@@ -355,8 +355,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 #if defined(CONFIG_SUPERIO)
 	static const struct ata_port_info info87560 = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.port_ops	= &ns87560_pata_ops,
 	};
 
drivers/ata/pata_octeon_cf.c +2 -2
index 0fe4ef3..efe2c19 100644
@@ -871,7 +871,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
 	ap->private_data = cf_port;
 	cf_port->ap = ap;
 	ap->ops = &octeon_cf_ops;
-	ap->pio_mask = 0x7f; /* Support PIO 0-6 */
+	ap->pio_mask = ATA_PIO6;
 	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
 		  | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING;
 
@@ -900,7 +900,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
 		ap->ioaddr.ctl_addr	= cs1 + (6 << 1) + 1;
 		octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16;
 
-		ap->mwdma_mask	= 0x1f; /* Support MWDMA 0-4 */
+		ap->mwdma_mask	= ATA_MWDMA4;
 		irq = platform_get_irq(pdev, 0);
 		irq_handler = octeon_cf_interrupt;
 
drivers/ata/pata_oldpiix.c +2 -2
index 2c1a91c..84ac503 100644
@@ -238,8 +238,8 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma1-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.port_ops	= &oldpiix_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_opti.c +1 -1
index e4fa4d5..99eddda 100644
@@ -163,7 +163,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &opti_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_optidma.c +5 -5
index 93bb6e9..86885a4 100644
@@ -399,15 +399,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_82c700 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &optidma_port_ops
 	};
 	static const struct ata_port_info info_82c700_udma = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &optiplus_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info_82c700, NULL };
drivers/ata/pata_pcmcia.c +34 -2
index 64b2e22..f4d009e 100644
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.5"
 
 /*
  *	Private data structure to glue stuff together
@@ -126,6 +126,37 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
 	return buflen;
 }
 
+/**
+ *	pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers
+ *	@qc: command
+ *
+ *	Drain the FIFO and device of any stuck data following a command
+ *	failing to complete. In some cases this is neccessary before a
+ *	reset will recover the device.
+ *
+ */
+ 
+void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
+{
+	int count;
+	struct ata_port *ap;
+
+	/* We only need to flush incoming data when a command was running */
+	if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+		return;
+
+	ap = qc->ap;
+
+	/* Drain up to 64K of data before we give up this recovery method */
+	for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+							&& count++ < 65536;)
+		ioread8(ap->ioaddr.data_addr);
+
+	if (count)
+		ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
+								count);
+
+}
 
 static struct scsi_host_template pcmcia_sht = {
 	ATA_PIO_SHT(DRV_NAME),
@@ -143,6 +174,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 	.sff_data_xfer	= ata_data_xfer_8bit,
 	.cable_detect	= ata_cable_40wire,
 	.set_mode	= pcmcia_set_mode_8bit,
+	.drain_fifo	= pcmcia_8bit_drain_fifo,
 };
 
 #define CS_CHECK(fn, ret) \
@@ -299,7 +331,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		ap = host->ports[p];
 
 		ap->ops = ops;
-		ap->pio_mask = 1;		/* ISA so PIO 0 cycles */
+		ap->pio_mask = ATA_PIO0;	/* ISA so PIO 0 cycles */
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
 		ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
drivers/ata/pata_pdc2027x.c +6 -6
index e94efcc..ca5cad0 100644
@@ -152,18 +152,18 @@ static struct ata_port_info pdc2027x_port_info[] = {
 	{
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
 		                  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= ATA_UDMA5, /* udma0-5 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &pdc2027x_pata100_ops,
 	},
 	/* PDC_UDMA_133 */
 	{
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
                         	  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= ATA_UDMA6, /* udma0-6 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc2027x_pata133_ops,
 	},
 };
drivers/ata/pata_pdc202xx_old.c +6 -6
index 799a6a0..5fedb3d 100644
@@ -291,22 +291,22 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	static const struct ata_port_info info[3] = {
 		{
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA2,
 			.port_ops = &pdc2024x_port_ops
 		},
 		{
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &pdc2026x_port_ops
 		},
 		{
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA5,
 			.port_ops = &pdc2026x_port_ops
 		}
drivers/ata/pata_qdi.c +2 -2
index f1b26f7..45879dc 100644
@@ -212,11 +212,11 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 
 	if (type == 6580) {
 		ap->ops = &qdi6580_port_ops;
-		ap->pio_mask = 0x1F;
+		ap->pio_mask = ATA_PIO4;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 	} else {
 		ap->ops = &qdi6500_port_ops;
-		ap->pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
+		ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */
 		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
 	}
 
drivers/ata/pata_radisys.c +3 -3
index 695d44a..4401b33 100644
@@ -216,9 +216,9 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma1-2 */
-		.udma_mask	= 0x14, /* UDMA33/66 only */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY,
+		.udma_mask	= ATA_UDMA24_ONLY,
 		.port_ops	= &radisys_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_rb532_cf.c +4 -60

99 lines not on this page · raw message

drivers/ata/pata_rz1000.c +1 -1
index 46d6bc1..0c574c0 100644
@@ -88,7 +88,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &rz1000_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_sc1200.c +30 -5
index 9a4bdca..f49814d 100644
@@ -2,7 +2,6 @@
  * New ATA layer SC1200 driver		Alan Cox <[email protected]>
  *
  * TODO: Mode selection filtering
- * TODO: Can't enable second channel until ATA core has serialize
  * TODO: Needs custom DMA cleanup code
  *
  * Based very heavily on
@@ -178,6 +177,31 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 	return ata_sff_qc_issue(qc);
 }
 
+/**
+ *	sc1200_qc_defer	-	implement serialization
+ *	@qc: command
+ *
+ *	Serialize command issue on this controller.
+ */
+
+static int sc1200_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_host *host = qc->ap->host;
+	struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+	int rc;
+
+	/* First apply the usual rules */
+	rc = ata_std_qc_defer(qc);
+	if (rc != 0)
+		return rc;
+
+	/* Now apply serialization rules. Only allow a command if the
+	   other channel state machine is idle */
+	if (alt && alt->qc_active)
+		return	ATA_DEFER_PORT;
+	return 0;
+}
+
 static struct scsi_host_template sc1200_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
@@ -187,6 +211,7 @@ static struct ata_port_operations sc1200_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 	.qc_prep 	= ata_sff_dumb_qc_prep,
 	.qc_issue	= sc1200_qc_issue,
+	.qc_defer	= sc1200_qc_defer,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= sc1200_set_piomode,
 	.set_dmamode	= sc1200_set_dmamode,
@@ -205,13 +230,13 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &sc1200_port_ops
 	};
 	/* Can't enable port 2 yet, see top comments */
-	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+	const struct ata_port_info *ppi[] = { &info, };
 
 	return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
 }
drivers/ata/pata_scc.c +2 -2
index d447f1c..4257d6b 100644
@@ -1001,8 +1001,8 @@ static struct ata_port_operations scc_pata_ops = {
 static struct ata_port_info scc_port_info[] = {
 	{
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x00,
+		.pio_mask	= ATA_PIO4,
+		/* No MWDMA */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &scc_pata_ops,
 	},
drivers/ata/pata_sch.c +3 -3
index 6aeeeeb..99cceb4 100644
@@ -84,9 +84,9 @@ static struct ata_port_operations sch_pata_ops = {
 
 static struct ata_port_info sch_port_info = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= ATA_PIO4,   /* pio0-4 */
-	.mwdma_mask	= ATA_MWDMA2, /* mwdma0-2 */
-	.udma_mask	= ATA_UDMA5,  /* udma0-5 */
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &sch_pata_ops,
 };
 
drivers/ata/pata_serverworks.c +10 -10
index 8d2fd9d..beaed12 100644
@@ -398,26 +398,26 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	static const struct ata_port_info info[4] = {
 		{ /* OSB4 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA2,
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* OSB4 no UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = 0x00,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			/* No UDMA */
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* CSB5 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &serverworks_csb_port_ops
 		}, { /* CSB5 - later revisions*/
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA5,
 			.port_ops = &serverworks_csb_port_ops
 		}
drivers/ata/pata_sil680.c +4 -4
index 9e764e5..4cb649d 100644
@@ -282,15 +282,15 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &sil680_port_ops
 	};
 	static const struct ata_port_info info_slow = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &sil680_port_ops
 	};
drivers/ata/pata_sis.c +19 -13
index 27ceb42..488e77b 100644
@@ -552,51 +552,57 @@ static struct ata_port_operations sis_old_ops = {
 
 static const struct ata_port_info sis_info = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
-	.mwdma_mask	= 0x07,
-	.udma_mask	= 0,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	/* No UDMA */
 	.port_ops	= &sis_old_ops,
 };
 static const struct ata_port_info sis_info33 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
-	.mwdma_mask	= 0x07,
-	.udma_mask	= ATA_UDMA2,	/* UDMA 33 */
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA2,
 	.port_ops	= &sis_old_ops,
 };
 static const struct ata_port_info sis_info66 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
-	.udma_mask	= ATA_UDMA4,	/* UDMA 66 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
+	.udma_mask	= ATA_UDMA4,
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info100 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &sis_100_ops,
 };
 static const struct ata_port_info sis_info100_early = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA5,
-	.pio_mask	= 0x1f,	/* pio0-4 */
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info133 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_ops,
 };
 const struct ata_port_info sis_info133_for_sata = {
 	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_for_sata_ops,
 };
 static const struct ata_port_info sis_info133_early = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_early_ops,
 };
drivers/ata/pata_sl82c105.c +3 -3
index 1b0e7b6..29f733c 100644
@@ -283,13 +283,13 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 {
 	static const struct ata_port_info info_dma = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &sl82c105_port_ops
 	};
 	static const struct ata_port_info info_early = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &sl82c105_port_ops
 	};
 	/* for now use only the first port */
drivers/ata/pata_triflex.c +2 -2
index ef95975..f1f13ff 100644
@@ -191,8 +191,8 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &triflex_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
drivers/ata/pata_via.c +12 -12
index ba556d3..b08e6e0 100644
@@ -422,46 +422,46 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Early VIA without UDMA support */
 	static const struct ata_port_info via_mwdma_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &via_port_ops
 	};
 	/* Ditto with IRQ masking required */
 	static const struct ata_port_info via_mwdma_info_borked = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &via_port_ops_noirq,
 	};
 	/* VIA UDMA 33 devices (and borked 66) */
 	static const struct ata_port_info via_udma33_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA2,
 		.port_ops = &via_port_ops
 	};
 	/* VIA UDMA 66 devices */
 	static const struct ata_port_info via_udma66_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &via_port_ops
 	};
 	/* VIA UDMA 100 devices */
 	static const struct ata_port_info via_udma100_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &via_port_ops
 	};
 	/* UDMA133 with bad AST (All current 133) */
 	static const struct ata_port_info via_udma133_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,	/* FIXME: should check north bridge */
 		.port_ops = &via_port_ops
 	};
drivers/ata/pata_winbond.c +1 -1
index 319e164..6d8619b 100644
@@ -193,7 +193,7 @@ static __init int winbond_init_one(unsigned long port)
 		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
 
 		ap->ops = &winbond_port_ops;
-		ap->pio_mask = 0x1F;
+		ap->pio_mask = ATA_PIO4;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ioaddr.cmd_addr = cmd_addr;
 		ap->ioaddr.altstatus_addr = ctl_addr;
drivers/ata/pdc_adma.c +3 -1
index be53545..3958817 100644
@@ -148,6 +148,8 @@ static struct scsi_host_template adma_ata_sht = {
 static struct ata_port_operations adma_ata_ops = {
 	.inherits		= &ata_sff_port_ops,
 
+	.lost_interrupt		= ATA_OP_NULL,
+
 	.check_atapi_dma	= adma_check_atapi_dma,
 	.qc_prep		= adma_qc_prep,
 	.qc_issue		= adma_qc_issue,
@@ -166,7 +168,7 @@ static struct ata_port_info adma_port_info[] = {
 		.flags		= ATA_FLAG_SLAVE_POSS |
 				  ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
-		.pio_mask	= 0x10, /* pio4 */
+		.pio_mask	= ATA_PIO4_ONLY,
 		.udma_mask	= ATA_UDMA4,
 		.port_ops	= &adma_ata_ops,
 	},
drivers/ata/sata_fsl.c +2 -2
index 55bc88c..c2e90e1 100644
@@ -1279,8 +1279,8 @@ static struct ata_port_operations sata_fsl_ops = {
 static const struct ata_port_info sata_fsl_port_info[] = {
 	{
 	 .flags = SATA_FSL_HOST_FLAGS,
-	 .pio_mask = 0x1f,	/* pio 0-4 */
-	 .udma_mask = 0x7f,	/* udma 0-6 */
+	 .pio_mask = ATA_PIO4,
+	 .udma_mask = ATA_UDMA6,
 	 .port_ops = &sata_fsl_ops,
 	 },
 };
drivers/ata/sata_inic162x.c +2 -2
index fbbd87c..305a4f8 100644
@@ -744,8 +744,8 @@ static struct ata_port_operations inic_port_ops = {
 
 static struct ata_port_info inic_port_info = {
 	.flags			= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
-	.pio_mask		= 0x1f,	/* pio0-4 */
-	.mwdma_mask		= 0x07, /* mwdma0-2 */
+	.pio_mask		= ATA_PIO4,
+	.mwdma_mask		= ATA_MWDMA2,
 	.udma_mask		= ATA_UDMA6,
 	.port_ops		= &inic_port_ops
 };
drivers/ata/sata_mv.c +739 -129

1,136 lines not on this page · raw message

drivers/ata/sata_nv.c +4 -3
index f65b537..6cda12b 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_promise.c +16 -14
index ba9a257..b1fd7d6 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_qstor.c +2 -1
index a000c86..c3936d3 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_sil.c +8 -8
index d009160..e67ce8e 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_sil24.c +9 -9
index 2590c22..0d8990d 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_sis.c +2 -2
index 9c43b4e..8f98332 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_svw.c +8 -8
index 609d147..7257f2d 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_sx4.c +2 -2
index ec04b8d..dce3dcc 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_uli.c +1 -1
index 019575b..e5bff47 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_via.c +8 -8
index 5c62da9..98e8c50 100644

Lines of this file are not shown. View the raw message.

drivers/ata/sata_vsc.c +5 -2
index c57cdff..ed70bd2 100644

Lines of this file are not shown. View the raw message.

include/linux/ata.h +6 -0
index 9a061ac..3901b00 100644

Lines of this file are not shown. View the raw message.

include/linux/libata.h +8 -0
index dc18b87..76262d8 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.