Skip to contentSkip to conversation

ide: turn selectproc() method into dev_select() method (take 5)

PATCH In review Sergei Shtylyov 2 participants 4 messages Mar 25, 2009 – Mar 31, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ide: turn selectproc() method into dev_select() method (take 5)

Turn selectproc() method into dev_select() method by teaching it to write to the device register and moving it from 'struct ide_port_ops' to 'struct ide_tp_ops'.

---
Changes since the 4th take:
- added ide_dev_select() declaration to <linux/ide.h> at last... :-/

 drivers/ide/au1xxx-ide.c |    1 
 drivers/ide/falconide.c  |    1 
 drivers/ide/ht6560b.c    |   20 ++++++++++++++--
 drivers/ide/ide-h8300.c  |    1 
 drivers/ide/ide-io-std.c |   13 ++++++++++
 drivers/ide/ide-iops.c   |   12 ---------
 drivers/ide/ns87415.c    |   25 ++++++++++++++++----
 drivers/ide/pmac.c       |   58 +++++++++++++++++++++++++++++++----------------
 drivers/ide/q40ide.c     |    1 
 drivers/ide/qd65xx.c     |   21 ++++++++++++++---
 drivers/ide/scc_pata.c   |    1 
 drivers/ide/sgiioc4.c    |    1 
 drivers/ide/trm290.c     |   20 ++++++++++++----
 drivers/ide/tx4938ide.c  |    1 
 drivers/ide/tx4939ide.c  |    3 +-
 include/linux/ide.h      |    6 ++--
 16 files changed, 137 insertions(+), 48 deletions(-)
drivers/ide/au1xxx-ide.c +1 -0
Index: linux-2.6/drivers/ide/au1xxx-ide.c
===================================================================
@@ -469,6 +469,7 @@ static const struct ide_tp_ops au1xxx_tp
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= ide_tf_load,
 	.tf_read		= ide_tf_read,
 
drivers/ide/falconide.c +1 -0
Index: linux-2.6/drivers/ide/falconide.c
===================================================================
@@ -91,6 +91,7 @@ static const struct ide_tp_ops falconide
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= ide_tf_load,
 	.tf_read		= ide_tf_read,
 
drivers/ide/ht6560b.c +18 -2
Index: linux-2.6/drivers/ide/ht6560b.c
===================================================================
@@ -103,7 +103,7 @@
 /*
  * This routine is invoked from ide.c to prepare for access to a given drive.
  */
-static void ht6560b_selectproc (ide_drive_t *drive)
+static void ht6560b_dev_select(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	unsigned long flags;
@@ -143,6 +143,8 @@ static void ht6560b_selectproc (ide_driv
 #endif
 	}
 	local_irq_restore(flags);
+
+	outb(drive->select | ATA_DEVICE_OBS, hwif->io_ports.device_addr);
 }
 
 /*
@@ -305,15 +307,29 @@ static int probe_ht6560b;
 module_param_named(probe, probe_ht6560b, bool, 0);
 MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
 
+static const struct ide_tp_ops ht6560b_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.write_devctl		= ide_write_devctl,
+
+	.dev_select		= ht6560b_dev_select,
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
 static const struct ide_port_ops ht6560b_port_ops = {
 	.init_dev		= ht6560b_init_dev,
 	.set_pio_mode		= ht6560b_set_pio_mode,
-	.selectproc		= ht6560b_selectproc,
 };
 
 static const struct ide_port_info ht6560b_port_info __initdata = {
 	.name			= DRV_NAME,
 	.chipset		= ide_ht6560b,
+	.tp_ops 		= &ht6560b_tp_ops,
 	.port_ops		= &ht6560b_port_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | /* is this needed? */
 				  IDE_HFLAG_NO_DMA |
drivers/ide/ide-h8300.c +1 -0
Index: linux-2.6/drivers/ide/ide-h8300.c
===================================================================
@@ -151,6 +151,7 @@ static const struct ide_tp_ops h8300_tp_
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= h8300_tf_load,
 	.tf_read		= h8300_tf_read,
 
drivers/ide/ide-io-std.c +13 -0
Index: linux-2.6/drivers/ide/ide-io-std.c
===================================================================
@@ -73,6 +73,18 @@ void ide_write_devctl(ide_hwif_t *hwif, 
 }
 EXPORT_SYMBOL_GPL(ide_write_devctl);
 
+void ide_dev_select(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 select = drive->select | ATA_DEVICE_OBS;
+
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		writeb(select, (void __iomem *)hwif->io_ports.device_addr);
+	else
+		outb(select, hwif->io_ports.device_addr);
+}
+EXPORT_SYMBOL_GPL(ide_dev_select);
+
 void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -280,6 +292,7 @@ const struct ide_tp_ops default_tp_ops =
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= ide_tf_load,
 	.tf_read		= ide_tf_read,
 
drivers/ide/ide-iops.c +1 -11
Index: linux-2.6/drivers/ide/ide-iops.c
===================================================================
@@ -29,17 +29,7 @@
 
 void SELECT_DRIVE(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_port_ops *port_ops = hwif->port_ops;
-	struct ide_cmd cmd;
-
-	if (port_ops && port_ops->selectproc)
-		port_ops->selectproc(drive);
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.tf_flags = IDE_TFLAG_OUT_DEVICE;
-
-	drive->hwif->tp_ops->tf_load(drive, &cmd);
+	drive->hwif->tp_ops->dev_select(drive);
 }
 
 void SELECT_MASK(ide_drive_t *drive, int mask)
drivers/ide/ns87415.c +20 -5
Index: linux-2.6/drivers/ide/ns87415.c
===================================================================
@@ -98,12 +98,15 @@ static void superio_tf_read(ide_drive_t 
 	}
 }
 
+static void ns87415_dev_select(ide_drive_t *drive);
+
 static const struct ide_tp_ops superio_tp_ops = {
 	.exec_command		= ide_exec_command,
 	.read_status		= superio_read_status,
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ns87415_dev_select,
 	.tf_load		= ide_tf_load,
 	.tf_read		= superio_tf_read,
 
@@ -182,10 +185,12 @@ static void ns87415_prepare_drive (ide_d
 	local_irq_restore(flags);
 }
 
-static void ns87415_selectproc (ide_drive_t *drive)
+static void ns87415_dev_select(ide_drive_t *drive)
 {
 	ns87415_prepare_drive(drive,
 			      !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
+
+	outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
 }
 
 static void ns87415_dma_start(ide_drive_t *drive)
@@ -229,7 +234,7 @@ static void __devinit init_hwif_ns87415 
 	 * Also, leave IRQ masked during drive probing, to prevent infinite
 	 * interrupts from a potentially floating INTA..
 	 *
-	 * IRQs get unmasked in selectproc when drive is first used.
+	 * IRQs get unmasked in dev_select() when drive is first used.
 	 */
 	(void) pci_read_config_dword(dev, 0x40, &ctrl);
 	(void) pci_read_config_byte(dev, 0x09, &progif);
@@ -281,8 +286,18 @@ static void __devinit init_hwif_ns87415 
 	outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
 }
 
-static const struct ide_port_ops ns87415_port_ops = {
-	.selectproc		= ns87415_selectproc,
+static const struct ide_tp_ops ns87415_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.write_devctl		= ide_write_devctl,
+
+	.dev_select		= ns87415_dev_select,
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
 };
 
 static const struct ide_dma_ops ns87415_dma_ops = {
@@ -299,7 +314,7 @@ static const struct ide_dma_ops ns87415_
 static const struct ide_port_info ns87415_chipset __devinitdata = {
 	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_ns87415,
-	.port_ops	= &ns87415_port_ops,
+	.tp_ops 	= &ns87415_tp_ops,
 	.dma_ops	= &ns87415_dma_ops,
 	.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 			  IDE_HFLAG_NO_ATAPI_DMA,
drivers/ide/pmac.c +39 -19

119 lines not on this page · raw message

drivers/ide/q40ide.c +1 -0
Index: linux-2.6/drivers/ide/q40ide.c
===================================================================
@@ -101,6 +101,7 @@ static const struct ide_tp_ops q40ide_tp
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= ide_tf_load,
 	.tf_read		= ide_tf_read,
 
drivers/ide/qd65xx.c +18 -3
Index: linux-2.6/drivers/ide/qd65xx.c
===================================================================
@@ -90,13 +90,15 @@ static int timings[4]={-1,-1,-1,-1}; /* 
  * This routine is invoked to prepare for access to a given drive.
  */
 
-static void qd65xx_select(ide_drive_t *drive)
+static void qd65xx_dev_select(ide_drive_t *drive)
 {
 	u8 index = ((	(QD_TIMREG(drive)) & 0x80 ) >> 7) |
 			(QD_TIMREG(drive) & 0x02);
 
 	if (timings[index] != QD_TIMING(drive))
 		outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
+
+	outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
 }
 
 /*
@@ -309,20 +311,33 @@ static void __init qd6580_init_dev(ide_d
 	drive->drive_data = (drive->dn & 1) ? t2 : t1;
 }
 
+static const struct ide_tp_ops qd65xx_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.write_devctl		= ide_write_devctl,
+
+	.dev_select		= qd65xx_dev_select,
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
 static const struct ide_port_ops qd6500_port_ops = {
 	.init_dev		= qd6500_init_dev,
 	.set_pio_mode		= qd6500_set_pio_mode,
-	.selectproc		= qd65xx_select,
 };
 
 static const struct ide_port_ops qd6580_port_ops = {
 	.init_dev		= qd6580_init_dev,
 	.set_pio_mode		= qd6580_set_pio_mode,
-	.selectproc		= qd65xx_select,
 };
 
 static const struct ide_port_info qd65xx_port_info __initdata = {
 	.name			= DRV_NAME,
+	.tp_ops 		= &qd65xx_tp_ops,
 	.chipset		= ide_qd65xx,
 	.host_flags		= IDE_HFLAG_IO_32BIT |
 				  IDE_HFLAG_NO_DMA,
drivers/ide/scc_pata.c +1 -0
Index: linux-2.6/drivers/ide/scc_pata.c
===================================================================
@@ -825,6 +825,7 @@ static const struct ide_tp_ops scc_tp_op
 	.read_altstatus		= scc_read_altstatus,
 	.write_devctl		= scc_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= scc_tf_load,
 	.tf_read		= scc_tf_read,
 
drivers/ide/sgiioc4.c +1 -0
Index: linux-2.6/drivers/ide/sgiioc4.c
===================================================================
@@ -505,6 +505,7 @@ static const struct ide_tp_ops sgiioc4_t
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= ide_tf_load,
 	.tf_read		= ide_tf_read,
 
drivers/ide/trm290.c +16 -4
Index: linux-2.6/drivers/ide/trm290.c
===================================================================
@@ -171,9 +171,11 @@ static void trm290_prepare_drive (ide_dr
 	local_irq_restore(flags);
 }
 
-static void trm290_selectproc (ide_drive_t *drive)
+static void trm290_dev_select(ide_drive_t *drive)
 {
 	trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
+
+	outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
 }
 
 static int trm290_dma_check(ide_drive_t *drive, struct ide_cmd *cmd)
@@ -298,8 +300,18 @@ static void __devinit init_hwif_trm290(i
 #endif
 }
 
-static const struct ide_port_ops trm290_port_ops = {
-	.selectproc		= trm290_selectproc,
+static const struct ide_tp_ops trm290_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.write_devctl		= ide_write_devctl,
+
+	.dev_select		= trm290_dev_select,
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
 };
 
 static struct ide_dma_ops trm290_dma_ops = {
@@ -315,7 +327,7 @@ static struct ide_dma_ops trm290_dma_ops
 static const struct ide_port_info trm290_chipset __devinitdata = {
 	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_trm290,
-	.port_ops	= &trm290_port_ops,
+	.tp_ops 	= &trm290_tp_ops,
 	.dma_ops	= &trm290_dma_ops,
 	.host_flags	= IDE_HFLAG_TRM290 |
 			  IDE_HFLAG_NO_ATAPI_DMA |
drivers/ide/tx4938ide.c +1 -0
Index: linux-2.6/drivers/ide/tx4938ide.c
===================================================================
@@ -189,6 +189,7 @@ static const struct ide_tp_ops tx4938ide
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= tx4938ide_tf_load,
 	.tf_read		= tx4938ide_tf_read,
 
drivers/ide/tx4939ide.c +2 -1
Index: linux-2.6/drivers/ide/tx4939ide.c
===================================================================
@@ -429,7 +429,7 @@ static void tx4939ide_tf_load_fixup(ide_
 	 * Fix ATA100 CORE System Control Register. (The write to the
 	 * Device/Head register may write wrong data to the System
 	 * Control Register)
-	 * While Sys_Ctl is written here, selectproc is not needed.
+	 * While Sys_Ctl is written here, dev_select() is not needed.
 	 */
 	tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
 }
@@ -579,6 +579,7 @@ static const struct ide_tp_ops tx4939ide
 	.read_altstatus		= ide_read_altstatus,
 	.write_devctl		= ide_write_devctl,
 
+	.dev_select		= ide_dev_select,
 	.tf_load		= tx4939ide_tf_load,
 	.tf_read		= ide_tf_read,
 
include/linux/ide.h +3 -3
Index: linux-2.6/include/linux/ide.h
===================================================================
@@ -603,7 +603,7 @@ struct ide_drive_s {
 
 	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
 	unsigned int	cyl;		/* "real" number of cyls */
-	unsigned int	drive_data;	/* used by set_pio_mode/selectproc */
+	unsigned int	drive_data;	/* used by set_pio_mode/dev_select() */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
 	u64		probed_capacity;/* initial reported media capacity (ide-cd only currently) */
@@ -661,6 +661,7 @@ struct ide_tp_ops {
 	u8	(*read_altstatus)(struct hwif_s *);
 	void	(*write_devctl)(struct hwif_s *, u8);
 
+	void	(*dev_select)(ide_drive_t *);
 	void	(*tf_load)(ide_drive_t *, struct ide_cmd *);
 	void	(*tf_read)(ide_drive_t *, struct ide_cmd *);
 
@@ -678,7 +679,6 @@ extern const struct ide_tp_ops default_t
  * @init_dev:		host specific initialization of a device
  * @set_pio_mode:	routine to program host for PIO mode
  * @set_dma_mode:	routine to program host for DMA mode
- * @selectproc:		tweaks hardware to select drive
  * @reset_poll:		chipset polling based on hba specifics
  * @pre_reset:		chipset specific changes to default for device-hba resets
  * @resetproc:		routine to reset controller after a disk reset
@@ -695,7 +695,6 @@ struct ide_port_ops {
 	void	(*init_dev)(ide_drive_t *);
 	void	(*set_pio_mode)(ide_drive_t *, const u8);
 	void	(*set_dma_mode)(ide_drive_t *, const u8);
-	void	(*selectproc)(ide_drive_t *);
 	int	(*reset_poll)(ide_drive_t *);
 	void	(*pre_reset)(ide_drive_t *);
 	void	(*resetproc)(ide_drive_t *);
@@ -1170,6 +1169,7 @@ u8 ide_read_status(ide_hwif_t *);
 u8 ide_read_altstatus(ide_hwif_t *);
 void ide_write_devctl(ide_hwif_t *, u8);
 
+void ide_dev_select(ide_drive_t *);
 void ide_tf_load(ide_drive_t *, struct ide_cmd *);
 void ide_tf_read(ide_drive_t *, struct ide_cmd *);
 
#1 lore raw
Quoted 8 lines · Sergei Shtylyov

Turn selectproc() method into dev_select() method by teaching it to write to the device register and moving it from 'struct ide_port_ops' to 'struct ide_tp_ops'.

---
Changes since the 4th take:
- added ide_dev_select() declaration to <linux/ide.h> at last... :-/

Seems like putting a bit more time into re-auditing the whole patch after first issues are discovered/fixed wouldn't hurt... and yes, the same can be said about re-reviewing it in this case...

applied (in place of 'take 2')

#2 lore raw
Quoted 11 lines · Bartlomiej Zolnierkiewicz
Quoted 8 lines

Turn selectproc() method into dev_select() method by teaching it to write to the device register and moving it from 'struct ide_port_ops' to 'struct ide_tp_ops'.

---
Changes since the 4th take:
- added ide_dev_select() declaration to <linux/ide.h> at last... :-/

Seems like putting a bit more time into re-auditing the whole patch after first issues are discovered/fixed wouldn't hurt...

What actually helped was actully compiling the patch. :-)

Quoted 1 line

and yes, the same can be said about re-reviewing it in this case...

;-)

MBR, Sergei

#3 lore raw
In reply to Bartlomiej Zolnierkiewicz
Quoted 11 lines · Bartlomiej Zolnierkiewicz
Quoted 8 lines

Turn selectproc() method into dev_select() method by teaching it to write to the device register and moving it from 'struct ide_port_ops' to 'struct ide_tp_ops'.

---
Changes since the 4th take:
- added ide_dev_select() declaration to <linux/ide.h> at last... :-/

Seems like putting a bit more time into re-auditing the whole patch after first issues are discovered/fixed wouldn't hurt...

What actually helped was trying to compile the patch. :-)

Quoted 1 line

and yes, the same can be said about re-reviewing it in this case...

;-)

MBR, Sergei