qemu-xen: pass-through: Allow slots 1e and 1f to be used
PATCH 1/1 qemu-xen: pass-through: Allow slots 1e and 1f to be used
This fixes an oversight in my recent patch "Allow any unused PCI device to be used for pass-through" whereby attempts to use slots 1e and 1f for pass-through would silently fail.
* This affects both static and manual selection of slots
* This affects both hot-plug and static pass-through
---
Please consider for inclusion in 3.4
hw/piix4acpi.c +2 -2
@@ -320,9 +320,9 @@ static void php_slots_init(void) }/* ACPI PCI hotplug controller */ -register_ioport_read (ACPI_PHP_IO_ADDR ,NR_PCI_DEV ,1 , +register_ioport_read (ACPI_PHP_IO_ADDR ,NR_PCI_DEV +2 ,1 , acpi_php_readb, &php_slots); -register_ioport_write (ACPI_PHP_IO_ADDR ,NR_PCI_DEV ,1 , +register_ioport_write (ACPI_PHP_IO_ADDR ,NR_PCI_DEV +2 ,1 , acpi_php_writeb, &php_slots);register_savevm ("pcislots" ,0 ,1 , pcislots_save, pcislots_load, &php_slots);
Quoted 21 lines · Simon Horman
This fixes an oversight in my recent patch "Allow any unused PCI device to be used for pass-through" whereby attempts to use slots 1e and 1f for pass-through would silently fail.
* This affects both static and manual selection of slots
* This affects both hot-plug and static pass-throughSigned-off-by Simon Horman <[email protected]>---
Please consider for inclusion in 3.4
Index:
ioemu-remote/hw/piix4acpi.c
===================================================================
---ioemu-remote.orig/hw/piix4acpi.c2009-03-31 18:21:29.000000000
+1100 +++ioemu-remote/hw/piix4acpi.c2009-03-31 18:22:23.000000000
+1100 @@ -320,9 +320,9 @@ static voidphp_slots_init(void)} /* ACPI PCI hotplug controller */
hw/piix4acpi.c static void php_slots_init(void) · line 328
Quoted 8 lines
hw/piix4acpi.c +2
-2-register_ioport_read (ACPI_PHP_IO_ADDR ,NR_PCI_DEV ,1 , +register_ioport_read (ACPI_PHP_IO_ADDR ,NR_PCI_DEV +2 ,1 , acpi_php_readb, &php_slots); -register_ioport_write (ACPI_PHP_IO_ADDR ,NR_PCI_DEV ,1 , +register_ioport_write (ACPI_PHP_IO_ADDR ,NR_PCI_DEV +2 ,1 , acpi_php_writeb, &php_slots);register_savevm ("pcislots" ,0 ,1 , pcislots_save, pcislots_load, &php_slots);
Hi Simon,
Please send another patch to reserve the IO range in DSDT. You may have a look at changeset 18951 as a reference. :-)
Thanks!
-- Dexuan
Quoted 31 lines · Dexuan
Quoted 21 lines · Simon Horman
This fixes an oversight in my recent patch "Allow any unused PCI device to be used for pass-through" whereby attempts to use slots 1e and 1f for pass-through would silently fail.
* This affects both static and manual selection of slots
* This affects both hot-plug and static pass-throughSigned-off-by Simon Horman <[email protected]>---
Please consider for inclusion in 3.4
Index:
ioemu-remote/hw/piix4acpi.c
===================================================================
---ioemu-remote.orig/hw/piix4acpi.c2009-03-31 18:21:29.000000000
+1100 +++ioemu-remote/hw/piix4acpi.c2009-03-31 18:22:23.000000000
+1100 @@ -320,9 +320,9 @@ static voidphp_slots_init(void)} /* ACPI PCI hotplug controller */hw/piix4acpi.c static void php_slots_init(void) · line 328
Quoted 8 lines
hw/piix4acpi.c +2
-2-register_ioport_read (ACPI_PHP_IO_ADDR ,NR_PCI_DEV ,1 , +register_ioport_read (ACPI_PHP_IO_ADDR ,NR_PCI_DEV +2 ,1 , acpi_php_readb, &php_slots); -register_ioport_write (ACPI_PHP_IO_ADDR ,NR_PCI_DEV ,1 , +register_ioport_write (ACPI_PHP_IO_ADDR ,NR_PCI_DEV +2 ,1 , acpi_php_writeb, &php_slots);register_savevm ("pcislots" ,0 ,1 , pcislots_save, pcislots_load, &php_slots);
Quoted 3 lines
Hi Simon,
Please send another patch to reserve the IO range in DSDT. You may have a look at changeset 18951 as a reference. :-)
Hi Dexuan,
Thanks for pointing that out. I will send another patch shortly.
Signature · 3 lines
Simon Horman VA Linux Systems Japan K.K., Sydney, Australia Satellite Office H: www.vergenet.net/~horms/ W: www.valinux.co.jp/en