core ticks/timer code
the Blackfin core tick/timer code has been around since the start of the original port, but i'm not sure it's entirely correct. some common code that uses timers seems to be misbehaving in that the timeout is pretty much immediate. makes me think that we've spent time on making udelay() work, but then just glossed over the rest.
unfortunately, there doesnt seem to be any docs on what exactly these functions do so it's hard for me to verify/change any of it.
my understanding is that:
- get_ticks - return some notion of "cpu ticks"
- get_tbclk - return number of "cpu ticks" that elapse in one second
- timer_init - setup a core timer
- get_timer(x) - not really sure what this is supposed to represent, or how
"x" is used
- reset_timer - reset core timer to 0
- CONFIG_SYS_HZ - no idea how this relates to ticks/timer in U-Boot as in the
Linux world, this is the core timer (scheduler) frequency (how many times to execute per second)
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090327/29966392/attachment.pgp
Quoted 8 lines · Mike Frysinger
the Blackfin core tick/timer code has been around since the start of the original port, but i'm not sure it's entirely correct. some common code that uses timers seems to be misbehaving in that the timeout is pretty much immediate. makes me think that we've spent time on making
udelay()work, but then just glossed over the rest.unfortunately, there doesnt seem to be any docs on what exactly these functions do so it's hard for me to verify/change any of it.
Yes, you are right. Some days ago I found that no proper documentation for the ticks/timer related code is there, too.
From looking at the existing code for some ARM boards (OSK, DaVinci,
OMAP3) my idea of this code is:
Quoted 2 lines
my understanding is that:
-get_ticks- return some notion of "cpu ticks"
Yes. Returns the number of cpu ticks since power up. I.e. with 1000 ticks per second (CONFIG_SYS_HZ) the number of elapsed ms since power up.
Quoted 1 line
-
get_tbclk- return number of "cpu ticks" that elapse in one second
Yes. Some implementations just return CONFIG_SYS_HZ which is supposed to be 1000.
Quoted 1 line
-
timer_init- setup a core timer
Some implementations do this in interrupt_init(), too.
Quoted 2 lines
-
get_timer(x)- not really sure what this is supposed to represent, or how
"x" is used
This is similar to get_ticks(), i.e. returns the number of ticks since power up. Parameter x is used as a base which is subtracted from ticks. With x == 0 this function is the same as get_ticks(). If x != 0 the value returned is
number of ticks since power up - x
Quoted 1 line
-
reset_timer- reset core timer to 0
Some implementations don't reset the timer (hw device) itself. They just reset the timestamp counter (sw variable) which counts the ticks since power up (i.e. that is returned by get_ticks()).
Quoted 3 lines
-
CONFIG_SYS_HZ- no idea how this relates to ticks/timer in U-Boot as in the
Linux world, this is the core timer (scheduler) frequency (how many times to execute per second)
CONFIG_SYS_HZ is supposed to be 1000
Does this make sense?
Best regards
Dirk
so if we were to document things, it should read like this:
- CONFIG_SYS_HZ is required to be 1000
- get_ticks() / get_tbclk() should be deprecated -- use get_timer() instead
- get_timer(X) returns the number of milliseconds since the last call toreset_timer(), minus X (which is in milliseconds too)
is there any reason to keep ticks/tbclk around ? looking at consumers of these functions, they seem to re-implement the get_timer() logic anyways. -mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090330/4c60685f/attachment.pgp
Quoted 2 lines
so if we were to document things, it should read like this:
-CONFIG_SYS_HZis required to be 1000
Can't this just be eliminated? It's stupid to have a configurable option that is neither ;-)
And it doesn't do much for my confidence when things stop working (like my tftp downloads now that the tftp timeout has been, ahem, "fixed") only because a "configurable" option wasn't set to the "correct" value.
If we can't change it with breaking something, then let's stop kidding ourselves and get rid of it.
--Scott
Dear Scott McNutt,
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 2 lines
so if we were to document things, it should read like this:
-CONFIG_SYS_HZis required to be 1000Can't this just be eliminated? It's stupid to have a configurable option that is neither ;-)
Quoted 7 lines
And it doesn't do much for my confidence when things stop working (like my tftp downloads now that the tftp timeout has been, ahem, "fixed") only because a "configurable" option wasn't set to the "correct" value.
If we can't change it with breaking something, then let's stop kidding ourselves and get rid of it.
Agreed.
We still need some hint that the timer works in millisecond resolution, though - no matter what you call it.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Whenever people agree with me, I always think I must be wrong. - Oscar Wilde
Quoted 2 lines · Wolfgang Denk
We still need some hint that the timer works in millisecond resolution, though - no matter what you call it.
How about just calling it HZ (or something more verbose like TIMER_HZ, but the former makes it easier to share code with Linux) and declaring it in a non-board header?
-Scott
Dear Scott Wood,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 2 lines · Wolfgang Denk
We still need some hint that the timer works in millisecond resolution, though - no matter what you call it.
How about just calling it HZ (or something more verbose like
TIMER_HZ, but the former makes it easier to share code with Linux) and declaring it in a non-board header?
It's OK with me. Other opinions?
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de IMPORTANT NOTICE TO PURCHASERS: The Entire Physical Universe, Inclu- ding This Product, May One Day Collapse Back into an Infinitesimally Small Space. Should Another Universe Subsequently Re-emerge, the Existence of This Product in That Universe Cannot Be Guaranteed.
Hi,
Quoted 4 lines
Dear Scott Wood,
Quoted 1 line · In message <[email protected]> you wrote:
On Tue, Mar 31, 2009 at 05:48:01PM +0200, Wolfgang Denk wrote:
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
We still need some hint that the timer works in millisecond resolution, though - no matter what you call it.
How about just calling it HZ (or something more verbose like
TIMER_HZ, but the former makes it easier to share code with Linux) and declaring it in a non-board header?It's OK with me. Other opinions?
Obviously only like-minded people around.
Who starts? ;)
Cheers
Detlev
Signature · 8 lines
I will use free software even if it is less powerful, or less reliable,
because freedom is the most important thing, and that is what the Free
Software movement is about. How we get freedom.
-- Richard M. Stallman
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.deQuoted 10 lines
Quoted 8 lines
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 2 lines · Wolfgang Denk
We still need some hint that the timer works in millisecond resolution, though - no matter what you call it.
How about just calling it HZ (or something more verbose like
TIMER_HZ, but the former makes it easier to share code with Linux) and declaring it in a non-board header?It's OK with me. Other opinions?
Obviously only like-minded people around.
I'm not particular ... and please don't mistake my sometimes dry sense of humor as complaining ... that's rarely my intent .... but please don't use a name that implies it is configurable. I learned the hard way that it is not. ;-)
If the value truly represents clocks per tick, or milliseconds per tick, and the value is always fixed, something along those lines would certainly be appropriate.
Best Regards,
--Scott
Dear Dirk Behme,
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 2 lines
-
get_ticks- return some notion of "cpu ticks"Yes. Returns the number of cpu ticks since power up. I.e. with 1000 ticks per second (
CONFIG_SYS_HZ) the number of elapsed ms since power up.
Hey. What a chance. We have a wiki. Add that information.
Quoted 2 lines
Yes. Some implementations just return
CONFIG_SYS_HZwhich is supposed to be 1000.
get_ticks() makes no sense to me.
Quoted 3 lines
Quoted 1 line
-
timer_init- setup a core timerSome implementations do this in
interrupt_init(), too.
Let them do it, if they need it, and if they document why they need it.
Quoted 2 lines
Quoted 2 lines
-
get_timer(x)- not really sure what this is supposed to represent, or how
"x" is used
See ppc code.
Quoted 7 lines
Quoted 3 lines
-
CONFIG_SYS_HZ- no idea how this relates to ticks/timer in U-Boot as in the
Linux world, this is the core timer (scheduler) frequency (how many times to execute per second)
CONFIG_SYS_HZis supposed to be 1000Does this make sense?
Yes, it makes sense that CONFIG_SYS_HZ is supposed to be 1000.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What is research but a blind date with knowledge? -- Will Harvey
Quoted 9 lines · Mike Frysinger
the Blackfin core tick/timer code has been around since the start of the original port, but i'm not sure it's entirely correct. some common code that uses timers seems to be misbehaving in that the timeout is pretty much immediate. makes me think that we've spent time on making
udelay()work, but then just glossed over the rest.unfortunately, there doesnt seem to be any docs on what exactly these functions do so it's hard for me to verify/change any of it.
Quoted 10 lines
my understanding is that:
-get_ticks- return some notion of "cpu ticks"
-get_tbclk- return number of "cpu ticks" that elapse in one second
-timer_init- setup a core timer
-get_timer(x)- not really sure what this is supposed to represent, or how
"x" is used
-reset_timer- reset core timer to 0
-CONFIG_SYS_HZ- no idea how this relates to ticks/timer in U-Boot as in the
Linux world, this is the core timer (scheduler) frequency (how many times to execute per second)
I've take a look on the current timer API and I've a lot of limitation on it as example on bitbanging we can not generate a clock over 200Khz or near as you said the API is dark
I've in mind to partially import the clocksource linux API or create a new U-Boot api devired from it's design
I'll propose a new design with the following Requierement
Generic delay function implementation
- ndelay()
- udelay()
- mdelay()
Generic helper
- khz2cycles()
- hz2cycles()
- cs2ns()
Timer API
- timer_init() - setup the timer
- timer_reset() - reset the timer (use in case of overflow)
- get_ticks() - return the current ticks
- get_cycles() - return the ticks frequency in ns
Best Regards,
J.
Quoted 21 lines · On Tuesday 31 March 2009 04:17:06 Jean-Christophe PLAGNIOL-VILLARD wrote:
Quoted 9 lines · Mike Frysinger
the Blackfin core tick/timer code has been around since the start of the original port, but i'm not sure it's entirely correct. some common code that uses timers seems to be misbehaving in that the timeout is pretty much immediate. makes me think that we've spent time on making
udelay()work, but then just glossed over the rest.unfortunately, there doesnt seem to be any docs on what exactly these functions do so it's hard for me to verify/change any of it.
Quoted 10 lines
my understanding is that:
-get_ticks- return some notion of "cpu ticks"
-get_tbclk- return number of "cpu ticks" that elapse in one second
-timer_init- setup a core timer
-get_timer(x)- not really sure what this is supposed to represent, or
how "x" is used
-reset_timer- reset core timer to 0
-CONFIG_SYS_HZ- no idea how this relates to ticks/timer in U-Boot as
in the Linux world, this is the core timer (scheduler) frequency (how many times to execute per second)
Quoted 6 lines
I've take a look on the current timer API and I've a lot of limitation on it as example on bitbanging we can not generate a clock over 200Khz or near as you said the API is dark
I've in mind to partially import the clocksource linux API or create a new U-Boot api devired from it's design
the clocksource framework in linux sounds like extreme overkill for u-boot. where do you see realistic usage of more than one timer ? u-boot is pretty much a single threaded app that polls.
Quoted 12 lines
I'll propose a new design with the following Requierement
Generic delay function implementation
-ndelay()
-udelay()
-mdelay()Generic helper
-khz2cycles()
-hz2cycles()
-cs2ns()
Quoted 5 lines
Timer API
-timer_init()- setup the timer
-timer_reset()- reset the timer (use in case of overflow)
-get_ticks()- return the current ticks
-get_cycles()- return the ticks frequency in ns
do you have real use cases here ? i'd actually propose the opposite: kill off the notion of "ticks", "cycles", and "hz". i dont think ndelay() is really necessary, and mdelay() is a simple macro on top of udelay(). that leaves us with really only the three functions we have today: timer_init(), get_timer(), and reset_timer(). we clarify that the function operates in terms of milliseconds and blam, it's all so simple now.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090331/3752280a/attachment-0001.pgp
Dear Mike Frysinger,
Quoted 1 line · In message <[email protected]> you wrote:
...
Quoted 6 lines
Quoted 2 lines
I've in mind to partially import the clocksource linux API or create a new U-Boot api devired from it's design
the clocksource framework in linux sounds like extreme overkill for u-boot. where do you see realistic usage of more than one timer ? u-boot is pretty much a single threaded app that polls.
Correct. We definitely do not need the full capabilities of the Linux framework. Any new implementation will be checked against the current code, and memory foot print is something we will check carefully.
OTOH, I think Sascha's u-boot-v2 uses code that was derived from the Linux code, but in a pretty lean way. It may be interesting to check there...
Quoted 18 lines
Quoted 12 lines
I'll propose a new design with the following Requierement
Generic delay function implementation
-ndelay()
-udelay()
-mdelay()Generic helper
-khz2cycles()
-hz2cycles()
-cs2ns()Quoted 5 lines
Timer API
-timer_init()- setup the timer
-timer_reset()- reset the timer (use in case of overflow)
-get_ticks()- return the current ticks
-get_cycles()- return the ticks frequency in ns
Quoted 6 lines
do you have real use cases here ? i'd actually propose the opposite: kill off the notion of "ticks", "cycles", and "hz". i dont think
ndelay()is really necessary, andmdelay()is a simple macro on top ofudelay(). that leaves us with really only the three functions we have today:timer_init(),get_timer(), andreset_timer(). we clarify that the function operates in terms of milliseconds and blam, it's all so simple now.
Agreed (except that we probably cannot completely throw away the tick; IIRC there are cases in early startup when nothing else is available yet).
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The night sky over the planet Krikkit is the least interesting sight
in the entire Universe.
- Douglas Adams _Life, the Universe, and Everything_Quoted 27 lines · On Tuesday 31 March 2009 06:28:23 Wolfgang Denk wrote:
Quoted 18 lines · In message Mike Frysinger
Quoted 12 lines
I'll propose a new design with the following Requierement
Generic delay function implementation
-ndelay()
-udelay()
-mdelay()Generic helper
-khz2cycles()
-hz2cycles()
-cs2ns()Quoted 5 lines
Timer API
-timer_init()- setup the timer
-timer_reset()- reset the timer (use in case of overflow)
-get_ticks()- return the current ticks
-get_cycles()- return the ticks frequency in nsQuoted 7 lines
do you have real use cases here ? i'd actually propose the opposite:
kill off the notion of "ticks", "cycles", and "hz". i dont thinkndelay()is really necessary, andmdelay()is a simple macro on top ofudelay(). that leaves us with really only the three functions we have
today:timer_init(),get_timer(), andreset_timer(). we clarify that the function operates in terms of milliseconds and blam, it's all so simple now.
Quoted 3 lines
Agreed (except that we probably cannot completely throw away the tick; IIRC there are cases in early startup when nothing else is available yet).
hrm, i can see that. but you agree that most use of ticks in common code can be converted to get_timer() ? on Blackfin systems (and it isnt alone going by a grep), the ticks interface simply returns get_timer(0), so clearly we should be able to convert common code to all use get_timer(0). that'd leave the ticks interface as optional ... for the systems that need early time sources, they can implement/use it as they need without bringing down everyone else.
i wouldnt mind starting a patch series for post 2009.05 to clean this up ... -mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090331/eb32f988/attachment.pgp
Quoted 32 lines · Mike Frysinger
Quoted 27 lines · On Tuesday 31 March 2009 06:28:23 Wolfgang Denk wrote:
Quoted 18 lines · In message Mike Frysinger
Quoted 12 lines
I'll propose a new design with the following Requierement
Generic delay function implementation
-ndelay()
-udelay()
-mdelay()Generic helper
-khz2cycles()
-hz2cycles()
-cs2ns()Quoted 5 lines
Timer API
-timer_init()- setup the timer
-timer_reset()- reset the timer (use in case of overflow)
-get_ticks()- return the current ticks
-get_cycles()- return the ticks frequency in nsQuoted 7 lines
do you have real use cases here ? i'd actually propose the opposite:
kill off the notion of "ticks", "cycles", and "hz". i dont thinkndelay()is really necessary, andmdelay()is a simple macro on top ofudelay(). that leaves us with really only the three functions we have
today:timer_init(),get_timer(), andreset_timer(). we clarify that the function operates in terms of milliseconds and blam, it's all so simple now.Quoted 3 lines
Agreed (except that we probably cannot completely throw away the tick; IIRC there are cases in early startup when nothing else is available yet).
Quoted 8 lines
hrm, i can see that. but you agree that most use of ticks in common code can be converted to
get_timer()? on Blackfin systems (and it isnt alone going by a grep), the ticks interface simply returnsget_timer(0), so clearly we should be able to convert common code to all useget_timer(0). that'd leave the ticks interface as optional ... for the systems that need early time sources, they can implement/use it as they need without bringing down everyone else.i wouldnt mind starting a patch series for post 2009.05 to clean this up ...
I've in mind too maybe I'll send a first version within few days for a arm soc and a blackfin based on u-boot-v2
Best Regards,
J.
Quoted 3 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 1 line
i wouldnt mind starting a patch series for post 2009.05 to clean this up ...
I've in mind too maybe I'll send a first version within few days for a arm soc and a blackfin based on u-boot-v2
In contrast to Jean-Christophe's plan
http://lists.denx.de/pipermail/u-boot/2009-March/049861.html
(last sentence) I'd like that we split general ticks/timer code clean up and bug fixes. I'd like that we implement the changes proposed by Mike and Jean-Christophe independent and don't mix them with other fixes for broken timer code like
http://lists.denx.de/pipermail/u-boot/2009-March/049146.html
Having proper/fixed (old style) timer code will make it easier to convert to new style afterwards.
From my point of view this is similar to rule "don't mix coding style
with functional changes".
Best regards
Dirk
Dirk,
Quoted 5 lines · Dirk Behme
... I'd like that we split general ticks/timer code clean up and bug fixes. I'd like that we implement the changes proposed by Mike and Jean-Christophe independent and don't mix them with other fixes for broken timer code like
Quoted 7 lines
http://lists.denx.de/pipermail/u-boot/2009-March/049146.html
Having proper/fixed (old style) timer code will make it easier to convert to new style afterwards.
From my point of view this is similar to rule "don't mix coding style
with functional changes".
Well the very same bug is present in OMAP1 and OMAP2 timer code, so you'll end fixing copied&paste code for no good reason.
At least cpu/arm925t/interrupts.c and cpu/arm926ejs/omap/timer.c deserves the same fix [*] you sent for OMAP3 code. So what about merging that timer code first and then fixing it?
ladis
[*] I have local fix for cpu/arm925t/interrupts.c, but since those copy&pasted files started diverging just because each of us cares about different piece of hardware, I do not want to make situation even worse.
Wolfgang,
Can this be put in the ToDo list so anyone who looks to clean up their CPU and/or architecture knows what it is exactly that we are trying to achieve
Thanks,
Graeme
Dear Graeme Russ,
Quoted 4 lines · In message <[email protected]> you…
Can this be put in the ToDo list so anyone who looks to clean up their CPU and/or architecture knows what it is exactly that we are trying to achieve
Maybe you can summarize and submit a patch, please?
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Our way is peace. -- Septimus, the Son Worshiper, "Bread and Circuses", stardate 4040.7.
Dear Mike Frysinger,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines
Agreed (except that we probably cannot completely throw away the tick; IIRC there are cases in early startup when nothing else is available yet).
hrm, i can see that. but you agree that most use of ticks in common code can be converted to
get_timer()? on Blackfin systems (and it isnt alone going by
Yes, of course I do.
Quoted 6 lines
a grep), the ticks interface simply returns
get_timer(0), so clearly we should be able to convert common code to all useget_timer(0). that'd leave the ticks interface as optional ... for the systems that need early time sources, they can implement/use it as they need without bringing down everyone else.i wouldnt mind starting a patch series for post 2009.05 to clean this up ...
Excellent. Thanks in advance.
For BF or for all architectures?
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Obviously, a major malfunction has occurred."
-- Steve Nesbitt, voice of Mission Control, January 28,
1986, as the shuttle Challenger exploded within view
of the grandstands.Quoted 11 lines · Wolfgang Denk
Dear Mike Frysinger,
Quoted 1 line · In message <[email protected]> you wrote:
...
Quoted 6 lines
Quoted 2 lines
I've in mind to partially import the clocksource linux API or create a new U-Boot api devired from it's design
the clocksource framework in linux sounds like extreme overkill for u-boot. where do you see realistic usage of more than one timer ? u-boot is pretty much a single threaded app that polls.
That's why I've tell to partially import it as have done Sascha in u-boot V2
Quoted 8 lines
Correct. We definitely do not need the full capabilities of the Linux framework. Any new implementation will be checked against the current code, and memory foot print is something we will check carefully.
OTOH, I think Sascha's u-boot-v2 uses code that was derived from the Linux code, but in a pretty lean way. It may be interesting to check there...
I've take a look on it and it's the idea I've in mind to do also
Quoted 19 lines
Quoted 19 lines
Quoted 18 lines
I'll propose a new design with the following Requierement
Generic delay function implementation
-ndelay()
-udelay()
-mdelay()Generic helper
-khz2cycles()
-hz2cycles()
-cs2ns()Timer API
-timer_init()- setup the timer
-timer_reset()- reset the timer (use in case of overflow)
-get_ticks()- return the current ticks
-get_cycles()- return the ticks frequency in ns
Quoted 6 lines
Quoted 6 lines
do you have real use cases here ? i'd actually propose the opposite: kill off the notion of "ticks", "cycles", and "hz". i dont think
ndelay()is really necessary, andmdelay()is a simple macro on top ofudelay(). that leaves us with really only the three functions we have today:timer_init(),get_timer(), andreset_timer(). we clarify that the function operates in terms of milliseconds and blam, it's all so simple now.
Yes I've real case where I do need ndelay to generate high speed clock with a gpio and udelay is too slow.
we need get_cycles and get_ticks to calculate the udelay, mdelay and ndelay otherwise how can you known the ticks frequency?
Quoted 4 lines
Agreed (except that we probably cannot completely throw away the tick; IIRC there are cases in early startup when nothing else is available yet).
not necessarely you can activate the timer just after the cpu_init so normally you do not need any get_ticks.
Best Regards,
J.
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 4 lines
Agreed (except that we probably cannot completely throw away the tick; IIRC there are cases in early startup when nothing else is available yet).
not necessarely you can activate the timer just after the
cpu_initso normally you do not need anyget_ticks.
Please check for example the PowerPC code, then.
Ther ethe timer implementation relies heavily on interrupts and is not available in early stages, for example in NAND booting systems with tight memory restrictions.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "To IBM, 'open' means there is a modicum of interoperability among some of their equipment." - Harv Masterson
Quoted 5 lines · Wolfgang Denk
Please check for example the PowerPC code, then.
Ther ethe timer implementation relies heavily on interrupts and is not available in early stages, for example in NAND booting systems with tight memory restrictions.
Is there any particular reason not to change the powerpc get_timer implementation to use the timebase (scaled down to ms)?
-Scott
Dear Scott Wood,
Quoted 3 lines · In message <[email protected]> you wrote:
Is there any particular reason not to change the powerpc
get_timerimplementation to use the timebase (scaled down to ms)?
I think so. There are some boards where we actually measure the system clock frequency against a known reference clock. IIRC this requires the TB to be independent, or something like that. [It's a long time since that code was written.]
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "There is nothing new under the sun, but there are lots of old things we don't know yet." - Ambrose Bierce
Quoted 11 lines · Wolfgang Denk
Dear Scott Wood,
Quoted 3 lines · In message <[email protected]> you wrote:
Is there any particular reason not to change the powerpc
get_timerimplementation to use the timebase (scaled down to ms)?I think so. There are some boards where we actually measure the system clock frequency against a known reference clock. IIRC this requires the TB to be independent, or something like that. [It's a long time since that code was written.]
The existing get_timer uses the decrementer, which is not independent of the timebase.
-Scott
Dear Scott,
Quoted 3 lines · In message <[email protected]> you wrote:
Quoted 3 lines
Quoted 3 lines
Is there any particular reason not to change the powerpc
get_timerimplementation to use the timebase (scaled down to ms)?
Side note: we already use the timebase for the implementation of udelay() and friends which are available as soon as we have a
(limited) C runtime environment, i. e. long before relocation.
Quoted 7 lines
Quoted 4 lines
I think so. There are some boards where we actually measure the system clock frequency against a known reference clock. IIRC this requires the TB to be independent, or something like that. [It's a long time since that code was written.]
The existing
get_timeruses the decrementer, which is not independent of the timebase.
Yes, you are right. I should have looked up the actual implementation. Sorry, volatile memory with too few/short refresh cycles ;-)
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken
Dear Mike Frysinger,
Quoted 3 lines · In message <[email protected]> you wrote:
unfortunately, there doesnt seem to be any docs on what exactly these functions do so it's hard for me to verify/change any of it.
If in doubt, look it up in the PowerPC implementation. That's the reference for what a half-way sane world could look like.
Quoted 10 lines
my understanding is that:
-get_ticks- return some notion of "cpu ticks"
-get_tbclk- return number of "cpu ticks" that elapse in one second
-timer_init- setup a core timer
-get_timer(x)- not really sure what this is supposed to represent, or ho> w
"x" is used
-reset_timer- reset core timer to 0
-CONFIG_SYS_HZ- no idea how this relates to ticks/timer in U-Boot as in the
Linux world, this is the core timer (scheduler) frequency (how many times to execute per second)
It's the number of ticks per second, i. e. 1000.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Be kind to unkind people - they need it the most.