Skip to contentSkip to conversation

PCI: Fix oops in pci_vpd_truncate

PATCH Applied Anton Vorontsov 3 participants 3 messages Mar 31, 2009 – Apr 6, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 PCI: Fix oops in pci_vpd_truncate

pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen:

sky2 driver version 1.22

Unable to handle kernel paging request for data at address 0x0000000c
Faulting instruction address: 0xc01836fc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01836fc] pci_vpd_truncate+0x38/0x40
LR [c029be18] sky2_probe+0x14c/0x518
Call Trace:
[ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
[ef82be20] [c018a11c] local_pci_probe+0x24/0x34
[ef82be30] [c018a14c] pci_call_probe+0x20/0x30
[ef82be50] [c018a330] __pci_device_probe+0x64/0x78
[ef82be60] [c018a44c] pci_device_probe+0x30/0x58
[ef82be80] [c01aa270] really_probe+0x78/0x1a0
[ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
[ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
[ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
[ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
[ef82bf20] [c01aa87c] driver_register+0x6c/0x110
[ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
[ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
[ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
[ef82bfd0] [c0362240] do_initcalls+0x38/0x58

This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so pci_vpd_truncate() is called before late_initcall(pci_sysfs_init), therefore ->attr isn't yet initialized.

---
 drivers/pci/access.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/pci/access.c +2 -1
index 3814447..64dd7df 100644
@@ -356,7 +356,8 @@ int pci_vpd_truncate(struct pci_dev *dev, size_t size)
 		return -EINVAL;
 
 	dev->vpd->len = size;
-	dev->vpd->attr->size = size;
+	if (dev->vpd->attr)
+		dev->vpd->attr->size = size;
 
 	return 0;
 }
Signature · 1 line
1.5.6.5
Acked-by on v1 1/1
#1 lore raw
Quoted 27 lines · On Wed, 1 Apr 2009 02:23:41 +0400 Anton Vorontsov <[email protected]>…

pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen:

sky2 driver version 1.22

Unable to handle kernel paging request for data at address 0x0000000c
Faulting instruction address: 0xc01836fc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01836fc] pci_vpd_truncate+0x38/0x40
LR [c029be18] sky2_probe+0x14c/0x518
Call Trace:
[ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
[ef82be20] [c018a11c] local_pci_probe+0x24/0x34
[ef82be30] [c018a14c] pci_call_probe+0x20/0x30
[ef82be50] [c018a330] __pci_device_probe+0x64/0x78
[ef82be60] [c018a44c] pci_device_probe+0x30/0x58
[ef82be80] [c01aa270] really_probe+0x78/0x1a0
[ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
[ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
[ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
[ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
[ef82bf20] [c01aa87c] driver_register+0x6c/0x110
[ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
[ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
[ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
[ef82bfd0] [c0362240] do_initcalls+0x38/0x58
Quoted 5 lines

This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so pci_vpd_truncate() is called before late_initcall(pci_sysfs_init), therefore ->attr isn't yet initialized.

If you are doing this you will never get sky2 vpd pci access, but that is not a big loss. I worry that other thing could break if devices are getting initialized before sysfs. Drivers that create sysfs entries (like the 10G drivers) could also break?

But this is okay as a provisional step, the sysfs startup order needs to be fixed.

Applied
#2 lore raw
In reply to Anton Vorontsov
Quoted 2 lines · On Wed, 1 Apr 2009 02:23:41 +0400 Anton Vorontsov <[email protected]>…

pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen:

Applied this to my for-linus branch, thanks Anton.

Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center