at91sam9/at91cap: improve clock framework
Subsystems (3)
PATCH 1/1 at91sam9/at91cap: improve clock framework
calculate dynamically the clock rate and pllb setting for usb
--- board/atmel/at91cap9adk/at91cap9adk.c | 3 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 3 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 +- cpu/arm926ejs/at91/Makefile | 2 + cpu/arm926ejs/at91/clock.c | 196 +++++++++++++++++++++++++++++ cpu/arm926ejs/at91/cpu.c | 14 ++ drivers/spi/atmel_dataflash_spi.c | 7 +- drivers/usb/atmel_usb.c | 3 +- include/asm-arm/arch-at91/clk.h | 17 ++- include/asm-arm/arch-at91/hardware.h | 3 + include/asm-arm/u-boot-arm.h | 3 + include/configs/afeb9260.h | 6 +- include/configs/at91cap9adk.h | 7 +- include/configs/at91sam9260ek.h | 9 +-- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 7 +- include/configs/at91sam9rlek.h | 6 +- lib_arm/board.c | 3 + 19 files changed, 254 insertions(+), 47 deletions(-) create mode 100644 cpu/arm926ejs/at91/clock.c create mode 100644 cpu/arm926ejs/at91/cpu.c
board/atmel/at91cap9adk/at91cap9adk.c +2 -1
@@ -29,6 +29,7 @@#include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h>
@@ -283,7 +284,7 @@ void lcd_show_board_info(void)lcd_printf ("at91support at atmel.com\n" );lcd_printf ("%s CPU at %s MHz\n" ,AT91_CPU_NAME , -strmhz (temp,AT91_CPU_CLOCK )); +strmhz (temp,get_cpu_clk_rate ())); dram_size =0 ;for (i =0 ; i <CONFIG_NR_DRAM_BANKS ; i++)
board/atmel/at91sam9261ek/at91sam9261ek.c +2 -1
@@ -29,6 +29,7 @@#include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <lcd.h>
@@ -185,7 +186,7 @@ void lcd_show_board_info(void)lcd_printf ("at91support at atmel.com\n" );lcd_printf ("%s CPU at %s MHz\n" ,AT91_CPU_NAME , -strmhz (temp,AT91_CPU_CLOCK )); +strmhz (temp,get_cpu_clk_rate ())); dram_size =0 ;for (i =0 ; i <CONFIG_NR_DRAM_BANKS ; i++)
board/atmel/at91sam9263ek/at91sam9263ek.c +2 -1
@@ -30,6 +30,7 @@#include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h>
@@ -206,7 +207,7 @@ void lcd_show_board_info(void)lcd_printf ("at91support at atmel.com\n" );lcd_printf ("%s CPU at %s MHz\n" ,AT91_CPU_NAME , -strmhz (temp,AT91_CPU_CLOCK )); +strmhz (temp,get_cpu_clk_rate ())); dram_size =0 ;for (i =0 ; i <CONFIG_NR_DRAM_BANKS ; i++)
board/atmel/at91sam9rlek/at91sam9rlek.c +2 -1
@@ -29,6 +29,7 @@#include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <lcd.h>
@@ -157,7 +158,7 @@ void lcd_show_board_info(void)lcd_printf ("at91support at atmel.com\n" );lcd_printf ("%s CPU at %s MHz\n" ,AT91_CPU_NAME , -strmhz (temp,AT91_CPU_CLOCK )); +strmhz (temp,get_cpu_clk_rate ())); dram_size =0 ;for (i =0 ; i <CONFIG_NR_DRAM_BANKS ; i++)
cpu/arm926ejs/at91/Makefile +2 -0
@@ -61,6 +61,8 @@ COBJS-y += at91sam9rl_serial.o COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9rl_spi.o endif COBJS-$(CONFIG_AT91_LED) += led.o +COBJS-y += clock.o +COBJS-y += cpu.o COBJS-y += timer.o SOBJS = lowlevel_init.o
cpu/arm926ejs/at91/clock.c new file +196 -0
196 lines not on this page · raw message
cpu/arm926ejs/at91/cpu.c new file +14 -0
@@ -0,0 +1,14 @@ +#include <config.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/io.h> + +int arch_cpu_init (void ) +{ +#ifdef AT91_MAIN_CLOCK +return at91_clock_init (AT91_MAIN_CLOCK ); +#else +return at91_clock_init (0 ); +#endif +}
drivers/spi/atmel_dataflash_spi.c +4 -3
@@ -21,6 +21,7 @@#include <common.h> #include <asm/arch/hardware.h> +#include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/at91_pio.h>
@@ -45,7 +46,7 @@ void AT91F_SpiInit(void)writel (AT91_SPI_NCPHA | (AT91_SPI_DLYBS &DATAFLASH_TCSS ) | (AT91_SPI_DLYBCT &DATAFLASH_TCHS ) | - ((AT91_MASTER_CLOCK /AT91_SPI_CLK ) <<8 ), + ((get_mck_clk_rate () /AT91_SPI_CLK ) <<8 ),AT91_BASE_SPI +AT91_SPI_CSR (0 ));#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
@@ -53,7 +54,7 @@ void AT91F_SpiInit(void)writel (AT91_SPI_NCPHA | (AT91_SPI_DLYBS &DATAFLASH_TCSS ) | (AT91_SPI_DLYBCT &DATAFLASH_TCHS ) | - ((AT91_MASTER_CLOCK /AT91_SPI_CLK ) <<8 ), + ((get_mck_clk_rate () /AT91_SPI_CLK ) <<8 ),AT91_BASE_SPI +AT91_SPI_CSR (1 ));#endif
@@ -62,7 +63,7 @@ void AT91F_SpiInit(void)writel (AT91_SPI_NCPHA | (AT91_SPI_DLYBS &DATAFLASH_TCSS ) | (AT91_SPI_DLYBCT &DATAFLASH_TCHS ) | - ((AT91_MASTER_CLOCK /AT91_SPI_CLK ) <<8 ), + ((get_mck_clk_rate () /AT91_SPI_CLK ) <<8 ),AT91_BASE_SPI +AT91_SPI_CSR (3 ));#endif
drivers/usb/atmel_usb.c +2 -1
@@ -28,6 +28,7 @@#include <asm/arch/hardware.h> #include <asm/arch/io.h> #include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> int usb_cpu_init (void ) {
@@ -35,7 +36,7 @@ int usb_cpu_init(void)#if defined(CONFIG_AT91CAP9 ) || defined(CONFIG_AT91SAM9260 ) || \ defined(CONFIG_AT91SAM9263 ) || defined(CONFIG_AT91SAM9G20 )/* Enable PLLB */ -at91_sys_write (AT91_CKGR_PLLBR ,CONFIG_SYS_AT91_PLLB ); +at91_sys_write (AT91_CKGR_PLLBR ,get_pllb_init ());while ((at91_sys_read (AT91_PMC_SR ) &AT91_PMC_LOCKB ) !=AT91_PMC_LOCKB ) ;#endif
include/asm-arm/arch-at91/clk.h +13 -4
@@ -2,6 +2,7 @@* (C) Copyright 2007 * Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> +* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <[email protected]> * * See file CREDITS for list of people who contributed to this * project.
@@ -26,24 +27,32 @@#include <asm/arch/hardware.h> +unsigned long get_cpu_clk_rate (void ); +unsigned long get_main_clk_rate (void ); +unsigned long get_mck_clk_rate (void ); +unsigned long get_plla_clk_rate (void ); +unsigned long get_pllb_clk_rate (void ); +unsigned int get_pllb_init (void ); +static inline unsigned long get_macb_pclk_rate (unsigned int dev_id) { -return AT91_MASTER_CLOCK ; +return get_mck_clk_rate (); }static inline unsigned long get_usart_clk_rate (unsigned int dev_id) { -return AT91_MASTER_CLOCK ; +return get_mck_clk_rate (); }static inline unsigned long get_lcdc_clk_rate (unsigned int dev_id) { -return AT91_MASTER_CLOCK ; +return get_mck_clk_rate (); }static inline unsigned long get_twi_clk_rate (unsigned int dev_id) { -return AT91_MASTER_CLOCK ; +return get_mck_clk_rate (); } +int at91_clock_init (unsigned long main_clock);#endif /* __ASM_ARM_ARCH_CLK_H__ */
include/asm-arm/arch-at91/hardware.h +3 -0
@@ -70,4 +70,7 @@#define AT91_SDRAM_BASE AT91_CHIPSELECT_1#endif +/* Clocks */ +#define AT91_SLOW_CLOCK 32768/* slow clock */ +#endif
include/asm-arm/u-boot-arm.h +3 -0
@@ -40,6 +40,9 @@ extern ulong FIQ_STACK_START; /* top of FIQ stack */int cpu_init (void );int cleanup_before_linux (void ); +/* cpu/.../arch/cpu.c */ +int arch_cpu_init (void ); +/* board/.../... */ int board_init (void );int dram_init (void );
include/configs/afeb9260.h +1 -5
@@ -27,15 +27,11 @@#define __CONFIG_H/* ARM asynchronous clock */ -#define AT91_MAIN_CLOCK 18429952/* from 18.432 MHz crystal */ -#define AT91_MASTER_CLOCK 89999598/* peripheral = main / 2 */ -#define CONFIG_SYS_AT91_PLLB 0x107c3e18/* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000/* 1us resolution */ -#define AT91_SLOW_CLOCK 32768/* slow clock */ -#define CONFIG_AT91SAM9260 1/* It's an Atmel AT91SAM9260 SoC*/ #define CONFIG_AFEB9260 1/* on an AFEB9260 Board */ +#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */
include/configs/at91cap9adk.h +1 -6
@@ -29,17 +29,12 @@/* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91CAP9" -#define AT91_MAIN_CLOCK 12000000/* 12 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000/* peripheral */ -#define AT91_CPU_CLOCK 200000000/* cpu */ -#define CONFIG_SYS_AT91_PLLB 0x10073e01/* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000/* 1us resolution */ -#define AT91_SLOW_CLOCK 32768/* slow clock */ -#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ #define CONFIG_AT91CAP9 1/* It's an Atmel AT91CAP9 SoC */ #define CONFIG_AT91CAP9ADK 1/* on an AT91CAP9ADK Board */ +#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */
include/configs/at91sam9260ek.h +1 -8
@@ -28,26 +28,19 @@#define __CONFIG_H/* ARM asynchronous clock */ -#define AT91_MAIN_CLOCK 18432000/* 18.432 MHz crystal */ -#define CONFIG_SYS_AT91_PLLB 0x107c3e18/* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000/* 1us resolution */ -#define AT91_SLOW_CLOCK 32768/* slow clock */ -#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ #ifdef CONFIG_AT91SAM9G20EK #define AT91_CPU_NAME "AT91SAM9G20" -#define AT91_MASTER_CLOCK 132000000/* peripheral */ -#define AT91_CPU_CLOCK 396000000/* cpu */ #define CONFIG_AT91SAM9G20 1/* It's an Atmel AT91SAM9G20 SoC*/ #else #define AT91_CPU_NAME "AT91SAM9260" -#define AT91_MASTER_CLOCK 100000000/* peripheral */ -#define AT91_CPU_CLOCK 200000000/* cpu */ #define CONFIG_AT91SAM9260 1/* It's an Atmel AT91SAM9260 SoC*/ #endif +#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */
include/configs/at91sam9261ek.h +1 -5
@@ -29,16 +29,12 @@/* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9261" -#define AT91_MAIN_CLOCK 18432000/* 18.432 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000/* peripheral */ -#define AT91_CPU_CLOCK 200000000/* cpu */ #define CONFIG_SYS_HZ 1000000/* 1us resolution */ -#define AT91_SLOW_CLOCK 32768/* slow clock */ -#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9261 1/* It's an Atmel AT91SAM9261 SoC*/ #define CONFIG_AT91SAM9261EK 1/* on an AT91SAM9261EK Board */ +#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */
include/configs/at91sam9263ek.h +1 -6
@@ -29,17 +29,12 @@/* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9263" -#define AT91_MAIN_CLOCK 16367660/* 16.367 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000/* peripheral */ -#define AT91_CPU_CLOCK 200000000/* cpu */ -#define CONFIG_SYS_AT91_PLLB 0x133a3e8d/* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000/* 1us resolution */ -#define AT91_SLOW_CLOCK 32768/* slow clock */ -#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9263 1/* It's an Atmel AT91SAM9263 SoC*/ #define CONFIG_AT91SAM9263EK 1/* on an AT91SAM9263EK Board */ +#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */
include/configs/at91sam9rlek.h +1 -5
@@ -29,16 +29,12 @@/* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9RL" -#define AT91_MAIN_CLOCK 12000000/* 12 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000/* peripheral */ -#define AT91_CPU_CLOCK 200000000/* cpu */ #define CONFIG_SYS_HZ 1000000/* 1us resolution */ -#define AT91_SLOW_CLOCK 32768/* slow clock */ -#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9RL 1/* It's an Atmel AT91SAM9RL SoC*/ #define CONFIG_AT91SAM9RLEK 1/* on an AT91SAM9RLEK Board */ +#define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */
lib_arm/board.c +3 -0
@@ -262,6 +262,9 @@ int print_cpuinfo (void); /* test-only */init_fnc_t *init_sequence[] = { cpu_init,/* basic cpu dependent setup */ +#if defined(CONFIG_ARCH_CPU_INIT) + arch_cpu_init,/* basic arch cpu dependent setup */ +#endif board_init,/* basic board dependent setup */ interrupt_init,/* set up exceptions */ env_init,/* initialize environment */
Signature · 1 line
1.6.1.3
PATCH 1/1 at91sam9/at91cap: improve clock framework
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 18 lines · In message <[email protected]> you wrote:
calculate dynamically the clock rate and pllb setting for usb
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- board/atmel/at91cap9adk/at91cap9adk.c | 3 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 3 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 +- cpu/arm926ejs/at91/Makefile | 2 + cpu/arm926ejs/at91/clock.c | 196 +++++++++++++++++++++++++++++ cpu/arm926ejs/at91/cpu.c | 14 ++ drivers/spi/atmel_dataflash_spi.c | 7 +- drivers/usb/atmel_usb.c | 3 +- include/asm-arm/arch-at91/clk.h | 17 ++- include/asm-arm/arch-at91/hardware.h | 3 + include/asm-arm/u-boot-arm.h | 3 + include/configs/afeb9260.h | 6 +- include/configs/at91cap9adk.h | 7 +-
Quoted 8 lines
include/configs/at91sam9260ek.h | 9 +-- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 7 +- include/configs/at91sam9rlek.h | 6 +- lib_arm/board.c | 3 + 19 files changed, 254 insertions(+), 47 deletions(-) create mode 100644 cpu/arm926ejs/at91/clock.c create mode 100644 cpu/arm926ejs/at91/cpu.c
What is the impact of this patch on the memory footprint of the system?
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The perversity of nature is nowhere better demonstrated by the fact that, when exposed to the same atmosphere, bread becomes hard while crackers become soft.
PATCH 1/1 at91sam9/at91cap: improve clock framework
Quoted 30 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 18 lines · In message <[email protected]> you wrote:
calculate dynamically the clock rate and pllb setting for usb
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- board/atmel/at91cap9adk/at91cap9adk.c | 3 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 3 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 +- cpu/arm926ejs/at91/Makefile | 2 + cpu/arm926ejs/at91/clock.c | 196 +++++++++++++++++++++++++++++ cpu/arm926ejs/at91/cpu.c | 14 ++ drivers/spi/atmel_dataflash_spi.c | 7 +- drivers/usb/atmel_usb.c | 3 +- include/asm-arm/arch-at91/clk.h | 17 ++- include/asm-arm/arch-at91/hardware.h | 3 + include/asm-arm/u-boot-arm.h | 3 + include/configs/afeb9260.h | 6 +- include/configs/at91cap9adk.h | 7 +-Quoted 8 lines
include/configs/at91sam9260ek.h | 9 +-- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 7 +- include/configs/at91sam9rlek.h | 6 +- lib_arm/board.c | 3 + 19 files changed, 254 insertions(+), 47 deletions(-) create mode 100644 cpu/arm926ejs/at91/clock.c create mode 100644 cpu/arm926ejs/at91/cpu.c
Quoted 2 lines
What is the impact of this patch on the memory footprint of the system?
708 bytes on the 9263ek
Best Regards,
J.
PATCH 1/1 at91sam9/at91cap: improve clock framework
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 31 lines · In message <[email protected]> you wrote:
Quoted 30 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 26 lines · In message <[email protected]> you wrote:
calculate dynamically the clock rate and pllb setting for usb
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- board/atmel/at91cap9adk/at91cap9adk.c | 3 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 3 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 +- cpu/arm926ejs/at91/Makefile | 2 + cpu/arm926ejs/at91/clock.c | 196 +++++++++++++++++++++++++++++ cpu/arm926ejs/at91/cpu.c | 14 ++ drivers/spi/atmel_dataflash_spi.c | 7 +- drivers/usb/atmel_usb.c | 3 +- include/asm-arm/arch-at91/clk.h | 17 ++- include/asm-arm/arch-at91/hardware.h | 3 + include/asm-arm/u-boot-arm.h | 3 + include/configs/afeb9260.h | 6 +- include/configs/at91cap9adk.h | 7 +- include/configs/at91sam9260ek.h | 9 +-- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 7 +- include/configs/at91sam9rlek.h | 6 +- lib_arm/board.c | 3 + 19 files changed, 254 insertions(+), 47 deletions(-) create mode 100644 cpu/arm926ejs/at91/clock.c create mode 100644 cpu/arm926ejs/at91/cpu.c
Quoted 3 lines
Quoted 2 lines
What is the impact of this patch on the memory footprint of the system?
708 bytes on the 9263ek
708 bytes more or less? And how much on the others processors?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Always leave room to add an explanation if it doesn't work out.
PATCH 1/1 at91sam9/at91cap: improve clock framework
Quoted 34 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 31 lines · In message <[email protected]> you wrote:
Quoted 30 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 26 lines · In message <[email protected]> you wrote:
calculate dynamically the clock rate and pllb setting for usb
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- board/atmel/at91cap9adk/at91cap9adk.c | 3 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 3 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 +- cpu/arm926ejs/at91/Makefile | 2 + cpu/arm926ejs/at91/clock.c | 196 +++++++++++++++++++++++++++++ cpu/arm926ejs/at91/cpu.c | 14 ++ drivers/spi/atmel_dataflash_spi.c | 7 +- drivers/usb/atmel_usb.c | 3 +- include/asm-arm/arch-at91/clk.h | 17 ++- include/asm-arm/arch-at91/hardware.h | 3 + include/asm-arm/u-boot-arm.h | 3 + include/configs/afeb9260.h | 6 +- include/configs/at91cap9adk.h | 7 +- include/configs/at91sam9260ek.h | 9 +-- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 7 +- include/configs/at91sam9rlek.h | 6 +- lib_arm/board.c | 3 + 19 files changed, 254 insertions(+), 47 deletions(-) create mode 100644 cpu/arm926ejs/at91/clock.c create mode 100644 cpu/arm926ejs/at91/cpu.c
Quoted 5 lines
Quoted 3 lines
Quoted 2 lines
What is the impact of this patch on the memory footprint of the system?
708 bytes on the 9263ek
708 bytes more or less? And how much on the others processors?
more
9260ek => +704 9261ek => +680 9263ek => +708 9rlek => +648
cap9adk => +708
based on the pm9623 and pm9261 precedently patch it will be less or the same
Best Regards,
J.