sh_keysc: use enable/disable_irq_wake()
Subsystems (2)
PATCH 1/1 sh_keysc: use enable/disable_irq_wake()
From: Magnus Damm <[email protected]>
Modify the sh_keysc driver to use enable/disable_irq_wake() during suspend and resume. These functions are used to enable the sh_keysc interrupt in the interrupt controller so the keypad can be used to wakeup the system from suspend.
Signed-off-by Magnus Damm <[email protected]>
---
Tested with wakeup disabled and enabled on a Migo-R board.
drivers/input/keyboard/sh_keysc.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
drivers/input/keyboard/sh_keysc.c +16 -1
@@ -259,12 +259,15 @@ static int sh_keysc_suspend(struct devic {struct platform_device *pdev =to_platform_device (dev);struct sh_keysc_priv *priv =platform_get_drvdata (pdev); +int irq =platform_get_irq (pdev,0 );unsigned short value; value =ioread16 (priv->iomem_base +KYCR1_OFFS ); -if (device_may_wakeup (dev)) +if (device_may_wakeup (dev)) { value |=0x80 ; +enable_irq_wake (irq); + }else value &= ~0x80 ;
@@ -272,8 +275,20 @@ static int sh_keysc_suspend(struct devicreturn 0 ; } +static int sh_keysc_resume (struct device *dev) +{ +struct platform_device *pdev =to_platform_device (dev); +int irq =platform_get_irq (pdev,0 ); + +if (device_may_wakeup (dev)) +disable_irq_wake (irq); + +return 0 ; +} +static struct dev_pm_ops sh_keysc_dev_pm_ops = { .suspend = sh_keysc_suspend, + .resume = sh_keysc_resume, };struct platform_driver sh_keysc_device_driver = {